Split the cost center removed_by_moderator

Hi Guy's,
Please help me in report heading i want to print Costcenter 124-130.
the selection option picking the value 00000001240000000130.
But i want to print on report heading costcenter 0000000124-0000000130. how to do this senario.
Thanks and Regards,
Sai.
Edited by: Julius Bussche on Jul 11, 2008 12:44 PM

Hi....
Say ..... 00000001240000000130 value you r having in F1
Try this code...
> concatenete F10(10) '-' F110(10) into F2.
Here declare F2 with one extra character and modify your internal table later..
Thanks,
Naveen.I

Similar Messages

How can I make a Splitting in Cost center accounting by Cost elements?

Hi experts:
I have defined a splitting structure and I would like to split the cost bettew fixed and variables cost.
To to that I have defined two different assignments and in the selection for each assignment I have completed the "Field label" with:
In the first assigment I would like to have only the "fixed cost" and I did the next:
1. Cost element (I have entered a Group) the cost which is in this cost element group is 4.000.0000 euros
2.- Activity type (I have entered a Individual value)
In the second assignment I did the same but with a different Cost element group (the original amount was 6.000.000 euros
The problem is that when I have executed the transaction to do the split, the system split the 50% of the total cost (10.000.000 euros) to each assignment.
How can I make if I want that the system split the cost based only in the "cost element group" which are defined one of them for the "Fixed cost" and the another one for "Variable cost"??
Are there any method which can split a total Cost for a Cost center based only in the cost amount for a cost element group??
Thanks a regards!!
Manuel

sry. im not from the united states, and I never think to spell when posting on forums
Your site's customers will think of it, and they will regard such errors as the mark of a sloppy vendor, not a sloppy webmaster. And I'm not sure what being from the US has to do with anything.
I want to position the container in the center while having absolute positioning, is that possible?
I have doubts, I've seen a lot of people saying that u can't center a container with aboslute position.
Then you should remove those people from your circle of trust. Of course it's possible.
Make the container relatively positioned, and centering with an explicit width and auto left/right margins. The inner absolutely positioned elements will center along with their positioned ancestor.

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

How to get the cost center and division for a given FI vendor document...

Hello Experts,
I am currently developing a report wherein I have to show the cost center and division used in the given FI document.
These documents are vendor related transactions.
In the file that was given to me by the user, she indicated the cost centers used by the FI documents
but when I view it via VA03 I cannot theere are no cost centers used in all the line items.So are there
any FM, BAPIs and/or tables that I can use for my requirement?
Hope you can help me guys. Thank you and take care!

Hi
I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
Hope solves ur problem
Thiru

How to delete the Cost center line item data

How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajesh

Hi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A.

Implication of changing the Cost center during posting

Hi all,
Due to business reasons, we have unchecked the 'Agree' indicator in the Acct assignment configuration for Asset accounting. Hence, cost center becomes editable during document posting.
We want the cost center to be editable only for ABF1 t-code and for other asset t-codes like acquistion, retirement, scrapping, transfer etc, we want to derieve the cost center from the master data.
Given the situation, I request experts' input on 2 questions -
1. Is it possible to have the cost center editable only in ABF1 and disabled in other AA transactions?
2. If cost center is editable in all the t-codes, what is the implication if the cost center is mismatched with the data available in the master record?
Please provide your inputs.
Thanks in advance.
Regards,
Sridevi

Hi,
The client has many plants, of which only few are running in SAP and the rest non-SAP.
Whenever there is transfer of asset from non-sap plant to SAP implemented plants, we handle the situation as below in the receiver plant-
1. Treat the asset transfer as legacy asset transfer and create asset master record through AS91. Maintain the cummulative acq value and Cummu depn value till the last period in master data.
2. As legacy transfer is not real time integrated with FI, we are doing ABF1 posting to pass manual JV to record APC and Acc depn. posting. At this instance, we want the cost center to be manually keyed in. This is because, we have yet another situation, where we need to have the net book value of the asset at cost center level for our allocation cycles. Hence,
3. But, for other normal AA transactions, it shd automatically derieve from asset master.
Request your suggestion on achieving the above requirement.
Regards,
Sridevi

PR creation for 'F" in ME51N, ME52n, the cost center field exit getactivate

Dear Gurus,
We have a Cost center Field exit activation, meaning when a PR is generated, the system will validate only for his department cost center. Its working fine
The issue, when we create PR through ME51n or me52n for Acct Assign "F" here we are going to enter only Work order number and GL number, not cost center. Still this field exit has activation, here the same error message popup, which suppose not to be.
So in MM configuration, i have disabled Cost center field for acct assignment "F".
Now when i create a PR for F, for single account assignment, the system will alllow, but if i want to distribute the qty to different work order, the system goes for validation for cost center field exit.
How to resolve for multiple assignment, how to deactivate the Cost center field exit for this case, its woking fine of Single account assignment (after disable the cost center field for Account Assignment "F")
Please help me out or any way to do this?
Regards
RS
Edited by: RS on Sep 14, 2009 7:40 AM

Hi,
Cross check you have Cost Center field is Hidden for Account Assignment Category A (Asset) in t.code:OME9. Now change Cost Center field as Display for Account Assignment Category A and save.
Now create a new PO with Account Assignment Category A and find the difference how Cost Center appearing in your PO in “Account Assignment” TAB.
Regards,
Biju K

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

Is there a way to redetermine the cost center for an internal order on a PO

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

When we create a PO for an asset we enter an internal order number and a cost center is determined from the internal order. Sometimes after the po is created the cost center on the IO changes. The po is not updated automatically on the PO and it results in the wrong cost center being posted to during the Goods Receipt and invoice receipt. Is there a program or batch job that we can run that will redetermine the accounting data on a PO?
Thanks!
Chris Lintner

G/L Account & the Cost Center not updating in BAPI_PO_CREATE1

Hi,
We are using BAPI_PO_CREATE1 for Service PO Creation.
The System is creating the Purchase Order, but it is not updating the G/L Account & the Cost Center.
We are passing the following parameters:
                wa_poaccount-PO_ITEM = '00010'.
                wa_poaccount-SERIAL_NO   = '01'.
                wA_poaccount-quantity   = '100.000'.
                wa_poaccount-GL_ACCOUNT = '0058120000'.
                wa_poaccount-COSTCENTER = '1000-LSG'.
                wa_poaccount-itm_number = '000010'.
                wa_poaccount-CO_AREA     = '1000'.
                append wa_poaccount to it_poaccount.
                clear wa_poaccount.
                wa_poaccountx-PO_ITEM = '00010'.
                wa_poaccountx-SERIAL_NO   = '01'.
                wA_poaccountx-quantity   = 'X'.
                wa_poaccountx-GL_ACCOUNT = 'X'.
                wa_poaccountx-COSTCENTER = 'X'.
                wa_poaccountx-CO_AREA     = 'X'.
                wa_poaccountx-itm_number = 'X'.
                append wa_poaccountx to it_poaccountx.
                clear wa_poaccountx.
Please guide how to correct the error.
Regards,
PK

Hi,
Thanks for the reply.
We are passing the following parameter in POITEM.
                  clear wa_poitem.
                  wa_POITEM-PO_ITEM = '00010'.
                  wa_POITEM-PLANT = '1003'.
                  wa_POITEM-TAX_CODE = 'S1'.
                  wa_poitem-MATL_GROUP = 'SER04'.
                  wa_POITEM-ACCTASSCAT = 'K'.
                  wa_poitem-ITEM_CAT   = 'D'.
                  wa_poitem-pckg_no    = '0000000001'.
                  wa_POITEM-SHORT_TEXT = 'Freight Service'.
                  append wa_POITEM to it_POITEM.
                  clear wa_poitemX.
                  wa_POITEMX-PO_ITEM = '00010'.
                  wa_POITEMX-PLANT = 'X'.
                  wa_POITEMX-TAX_CODE = 'X'.
                  wa_poitemx-MATL_GROUP = 'X'.
                  wa_poitemx-short_Text = 'X'.
                  wa_POITEMX-ACCTASSCAT = 'X'.
                  wa_poitemx-ITEM_CAT   = 'X'.
                  wa_poitemX-pckg_no    = 'X'.
                  append wa_POITEMX to it_POITEMX.
Please guide.
Regards,
PK

Using the tcode:S_ALR_87013611, no report data for the cost center

Hi,Friends.I need a help.
In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
data:
( Note: G/L acct:55020141 is also a primary cost element)
In the tcode:S_ALR_87013611,I entered the following data and executed.
but the result is:{Report contains no data. Check the selection log}.
data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
        Or value(s):2001}
(Note: Cost center:2001 belongs to Controlling Area: C999)
please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data for
the cost center 2001.
sincerely                      WenYao Ma
Edited by: wenyao ma on Mar 22, 2010 1:09 PM

thank you,friends.
I just solved it.
Solution:
1) Maintain Controlling Area
   path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
In the {Activate components/control indicators}cost center should be 'component active'
2) Maintain Number Ranges for Controlling Documents
   path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
Element { COIN CO Through-postings from FI} should be assigned to one group.

I want to find the cost center manager's PERNR

Hi,
I have list of cost centers which are not the home cost centers. For this cost centers i need to find the person responsible. For this requirement BAPI_COSTCENTER_GETDETAIL1 function module returns the cost center details where VERAK field is the PERSON Responsible name. But I want the owners PERNR, USRID, AND POSITION.
I dont know how to find the pernr from PERSON responsible name. So Please anyone help on it.
Thanks & Regards,
vignesh

Hi,
Your answer was helpful.
Org.unit manager might be different. I can pick the org unit attached to the cost center and find the manager of the org unit. How are you saying org unit manager is same for cost center also.
If org unit manager is responsible for cost center attached to it then i got my solution for my requirement. Please confirm this.
If you know the bapi_get_costcenter_details1, then please confirm me that person_in_charge_user parameter is the user id of the pernr. This will also help me in resolving this issue because using user id i can get pernr.
Thanks in Advance,
Vignesh

Change the cost center

Hi all,
In a report, I must change the cost center for Purchase Requisition and Purchase Order.
In my opinion I must use the bapi: "BAPI_REQUISITION_CHANGE" and "BAPI_PO_CHANGE", but I don't know how to use.
Is this correct ?
If yes, can someone explain to me how to call them to change cost center ?
Thank you in advance.

Hi
Please refer the below link you may useful.
BAPI_REQUISITION_CHANGE
Thanks and regards,
Syf

How to make the Deprtmnt field in the cost center master data as required ?

Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
Suresh

Hi Eli,
Thanks for the quick reply
while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in create mode itself.
thanks
regards
Suresh

OLMRLIST screen how to fix the cost center tab and its impact?

Hi
Explain the function of the T-Code OLMRLIST.
How does it interact with the MIRO T-Code?
What is the significance of a field check box being checked in OLMRLIST. I particularly want to know about the Cost center field.
Raja

OLMRLIST is used to adjust teh screen variant for the MIRO screen. At the line item level you see layouts and each layout has a set of fields in the form of columns. These are adjusted via the screen layout variants in OLMRLIST like 7_6310 which is all information and like wise you have 6_6310, etc...

Split the cost center removed_by_moderator

Similar Messages

Maybe you are looking for