SPM Job + table CDHDR

hello Experts,
I have a problem regarding the firefighter job that runs every day--> /VIRSA/ZVFAT_V03
We have planned on our system one hourly job /VIRSA/ZVFATBAK and the above mentioned.
The last month the job is being cancelled offen because of the message :
TSV_TNEW_PAGE_ALLOC_FAILED:No storage space available for extending the internal table
First we implemented the solution witbin the note 14312190 were we created new indexes for the table CDHDR and the first two days the job was succesfull, after it failed again every once in a while. For your information our table CDHDR has 220 million entries, which is rather big.
Before i check this problem from the Basis side, because depending on the message it is a Basis problem, is there any other optimization i can perform ? like using the SPM log data auto archive function? or maybe somehow archiving table CDHDR which is probably causing the problem?
Best regards,
david

Hello Alpesh,
the note 1039144 is the one that we implemented with the new indexes.
But thanks anyway, i checked it again and i saw i forgot to set the value to Yes in the Configuration of the tool in : Retrieve Change Log.
I will check if the job will run succesfully the next days.
Best regards,
david

Similar Messages

Entries in table CDHDR for transaction MM02 missing after upgrade to ECC6.0

Hi,
I am supporting a client who has just performed an upgrade from 4.7 to ECC6.0 on their test system. We try and use transaction MM04 (display material master changes) or MM02 and view changes to the material master but there are no entries.
During the upgrade, the entries for transaction code MM02 in table CDHDR have been lost. Can anybody give me assistance on how to avoid this when performing the production upgrade, or even better, is there any way to get these entries back?
Thank you.
Sharon.

That shouldn't happen - entries shouldn't get lost.
Is there anything in the CDHDR table (by browsing it with SE16)? If not, then something went wrong during the upgrade....
Have there been modifications to the table? Is the the table active in SE11?
Markus

SMD Tool. No change pointers log on table CDHDR nor CDPOS.

Hi everyone.
I'm trying to use the SMD tool. I've created my Message Type, and my Change Document Object(Tcode SCDO).
Priorly, I've tested the ALE Layer configuration, by sending iDocs of my message type directly with the MASTER_IDOC_DISTRIBUTE Function Module, and it works fine. I mean, I have no problem with sending iDocs or the ALE configuration.
In the transaction SCDO I've logged my Object Type, and I've assigned the table THOC (Public Holiday Calendar), from wich I want to monitoring the field DATUM, wich is flagged as "Copy as Internal Table" and "Doc. for individual fields at delete". Also in this transaction (SCDO), I've created the Update pgm.
In transaction BD95, I've inserted my ALE Object Type, and I've assigned the table THOC and the field DATUM to my Object. Field DATUM is referenced to the DATUM Data Element. Due that the Data Element DATUM isn't flagged as "Change Document", I've changed the Data Element referenced by the field DATUM for one copy of the Data Element DATUM, wich I've flagged as "Change Document".
My Message Type is alredy on the following tables:
Tcode BD50: The checkbox for monitoring Change Pointers is on.
Tcode BD52: Where I've assigned my ALE Object, the table THOC and the field KEY.
Tcode BD59: Where I've assigned to it the segment of my Message Type, and the field (same field type) wich corresponds to the field DATUM of table THOC.
Tcode BD60: The ref. msg. is the same as my Message Type, i've created the function module to create the iDocs containing the delta information (via tcode BD21 I alredy reach this FM that I've created), there's no table nor Object Type Associated (in this step I've tried both cases, with table THOC and my Object Type assigned, and both not assigned), the checkboxes "ID for reducible message type" and "BDCP2 OK" are off.
The Change Pointers in Tcode BD61 is on.
After all this configuration steps, I still cannot see logs of my Change Document Type in tables CDHDR nor CDPOS. Besides, when I run Tcode BD21 with my message type, and when the program reaches my Function Module (Z_MASTERIDOC_CREATE_SMD_xxxxx), the function CHANGE_POINTERS_READ with my ALE Object gets no records. At this step, the same function (CHANGE_POINTERS_READ) with another ALE Object does get records.
Table BDCPS alredy contains records for my Message Type, and in those records, the "Process" field is empty.
Am I missing one step or something?
Can anyone help me please?
Thanks in advice.
Regards.

Hi everyone.
I'm trying to use the SMD tool. I've created my Message Type, and my Change Document Object(Tcode SCDO).
Priorly, I've tested the ALE Layer configuration, by sending iDocs of my message type directly with the MASTER_IDOC_DISTRIBUTE Function Module, and it works fine. I mean, I have no problem with sending iDocs or the ALE configuration.
In the transaction SCDO I've logged my Object Type, and I've assigned the table THOC (Public Holiday Calendar), from wich I want to monitoring the field DATUM, wich is flagged as "Copy as Internal Table" and "Doc. for individual fields at delete". Also in this transaction (SCDO), I've created the Update pgm.
In transaction BD95, I've inserted my ALE Object Type, and I've assigned the table THOC and the field DATUM to my Object. Field DATUM is referenced to the DATUM Data Element. Due that the Data Element DATUM isn't flagged as "Change Document", I've changed the Data Element referenced by the field DATUM for one copy of the Data Element DATUM, wich I've flagged as "Change Document".
My Message Type is alredy on the following tables:
Tcode BD50: The checkbox for monitoring Change Pointers is on.
Tcode BD52: Where I've assigned my ALE Object, the table THOC and the field KEY.
Tcode BD59: Where I've assigned to it the segment of my Message Type, and the field (same field type) wich corresponds to the field DATUM of table THOC.
Tcode BD60: The ref. msg. is the same as my Message Type, i've created the function module to create the iDocs containing the delta information (via tcode BD21 I alredy reach this FM that I've created), there's no table nor Object Type Associated (in this step I've tried both cases, with table THOC and my Object Type assigned, and both not assigned), the checkboxes "ID for reducible message type" and "BDCP2 OK" are off.
The Change Pointers in Tcode BD61 is on.
After all this configuration steps, I still cannot see logs of my Change Document Type in tables CDHDR nor CDPOS. Besides, when I run Tcode BD21 with my message type, and when the program reaches my Function Module (Z_MASTERIDOC_CREATE_SMD_xxxxx), the function CHANGE_POINTERS_READ with my ALE Object gets no records. At this step, the same function (CHANGE_POINTERS_READ) with another ALE Object does get records.
Table BDCPS alredy contains records for my Message Type, and in those records, the "Process" field is empty.
Am I missing one step or something?
Can anyone help me please?
Thanks in advice.
Regards.

Unable to join the tables CDHDR, CDPOS

Hello,
I want to create a Query connecting tables CDHDR & CDPOS to extract cost center details which are changed. To be precise, when cost center details are changed using transactions KS02 & KS03, I want to extract those details and run the report. I am unable to join the tables using SAP Queries SQ01, SQ02, SQ03.
Kindly suggest me regarding the same.
Thanks in advance.
Regards
Sravan Mulumudi.

Hi Jeve,
I was testing the report S_ALR_87012308, but this displays changes done to G/L accounts. I have tried every possibility. Could you please explain further ?
Regards
Sravan.

Condition information is not reflecting in tables CDHDR and CDPOS

Hi,
When a Purchase order condition information is changed or created, the changes are not reflecting in the table CDHDR and CDPOS.
Please can someone suggest a solution .

Hi Raj
When there are any changes in the conditions, the overall difference will be reflected in field <b>EFFWR i.e Effective Value of Item.</b> Please check...
Kind Regards
Eswar

Info de las tablas CDHDR y CDPOS

Estimadas (os)
Requiero obtener una serie de datos de las tablas CDHDR y CDPOS y quisiera consultarles si existe alguna tabla que integre la información de ambas (así como la transacción: s_alr_87101239 pero a nivel tabla (esta última transacción tiene asociada la estructura CDDISP_STR (que integra la CDHDR y CDPOS)
Muchas gracias,
Saludos,
Marco A. Cabrera

Marco:
Yo jugaría un poco con el comando "Referencia de utilización" de la SE11. Podrías ver las vistas que existen para cada tabla y verificar si hay alguna que integre a las dos.
Si no existe al nivel de tabla quizás existe integración al nivel de campo, también desde la SE11 podés ver dónde se usan los elementos de datos clave de ambas tablas, y ver si existe una tercer tabla que los relacione.
Espero haber sido de ayuda,
Saludos,
Federico.

CUP Approve using SPM Owner table

All,
I am trying to implement CUP to automatically provision elevated access using SPM.
I have found the SUPER_USER_ACCESS request type and this would appear to perform the required actions to provision the access but is there a way of using the SPM Owners table to derive the relevant approvers within CUP.
This would be instead of using defined CABs at the approval stage within CUP?
Please advise me on whether this is technically possible and how I would need to go about configuring it?
Thanks, Simon

All,
Just in case you were wondering - when configuring the stage, rather than selecting a custom Approver Determinator, there is a standard one already there called, "Super Access Owner".
This appears to perform the exact function which I was looking for.
Enjoy,
Simon

Background Job table

Hi All,
I am new to ABAP. as per our client requirement we need to call background job though a abap code.
How can we retrive background jobs? where/in which tabl are names of backghround job saved?

Hi,
please check out the below link it will help you
http://help.sap.com/saphelp_46c/helpdata/en/73/69ef3d55bb11d189680000e829fbbd/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2d513897110872e10000009b38f889/content.htm
http://www.finance.utoronto.ca/fast/qrg/nav/commonrptfcns/runrptbackgr.htm
the following list is the available system tables
ADCP Person/Address assignment (central address administration)
ADIRACCESS Table to store keys for TADIR objects
ADR2 Telephone numbers (central address admin.)
ADRP Persons (central address administration)
APQD DATA DEFINITION Queue
APQI Queue info definition
D010SINF ABAP- Information about ABAP program source code
E071 Change and Transport System- Object Entries of Requests/Tasks
E07T Change and Transport System- Short Texts for Requests/Tasks
ENLFDIR Additional Attributes for Function Modules
INDX System table INDX
NAST Message Status
STXH STXD SAPscript text file header
T005 Countries
T005S Taxes- Region (Province) Key
T005U Taxes- Region Key- Texts
T006 Units of Measurement
T015M Names of the months
T247 Month name and short text
T777A Building Addresses
TADIR Directory of Repository Objects
TBTCO Job status overview table
TBTCP Batch job step overview
TFDIR Function Module
TFTIT Function Module Short Text
TSP03L Spool- Long device names
TSTC SAP Transaction Codes
TSTCT Transaction Code Texts
TUTYP User Types in Current Price List in SAP System
TUZUS Special versions
TVARV Table of variables in selection criteria
TVDIR View Directory
US930 Data Relevant to Measurement for User Master Record
USR01 User master record (runtime data)
USR02 Logon data
USR04 User master authorizations
USR06 Additional Data per User
USR14 Surchargeable Language Versions per User
USR21 Assign user name address key
ARCH_OBJ Objects for archiving and reorganization
BTCUED Description of user event IDs for background processing
BTXSUPB BSI- Upgrade-Information
CCCFLOW Client Copy Control Flow
DBSTATC DB Optimizer Control (Statistics Creation)
DEVACCESS Table for development users
DEVL OBSOLETE- Do not use (See TCETRAL)
E070 Change and Transport System- Header of Requests/Tasks
E070L CTS- Index for Assigning Numbers to Requests/Tasks
INSTVERS Documentation for installation Status and History
PAT03 Patch Directory
SDBAC DBA Action Table
T100 Messages
TAPLT Program Application Long Texts
TASYS OBSOLETE- Do not use, see TCEDELI
TDEVC Development Classes
TEMSE Temp Sequential table.
TLOCK Change and Transport System- Lock Table
TNAPR Processing programs for output. Can be very handy to find the print program for a SAPScript.
TNAST Printed output control table
TPFET Table of profile parameters
TPFHT Profile header, administration data for profiles in DB
TPROT Table contains all DD tables to be logged
TRBAT Communication Table for Transport Control
TRDIRT Title texts for programs in TRDIR
TRESN Table of Naming Conventions in ABAP Workbench
TRJOB Job ID for Coordinating Batch-ABAP/UNIX for Transports
TSP03C Spool- Device Description Extension
TST03 TemSe data
TSYST OBSOLETE- Do not use (see TCESYST)
TWSYS OBSOLETE- Do not use (See TCETRAL)
USOBT Relation transaction - authorization object
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
USR40 Table for illegal passwords
USR41 User master- Additional data
UST04 User masters
VARIT Variant texts
VARID Variant directory
D010TAB Table for Use Report---Tables
DD02L SAP tables
DD02T R/3 DD- SAP table texts
DD03L Table Fields
DD03T DD- Texts for fields (language dependent)
EDIDC IDOC Control Records
EDIDOT Short description of IDoc types
EDID2 IDOC segments (version 3.1)
EDID4 IDOC segments (version 4.6)
EDSEA EDI- Table of all segments of current release
VRSX2 Central Table for Version Management (Report Source)
TSE05 Can add parameters to the INSERT COMMAND (IC). Then, when you insert command, your info appears in the editor. Useful for comment blocks, common section of code, etc.
CDPOS Change document items
CDHDR Change document header
T529A governs the foreground sequence of infotypes the system will use to prompt the user during online and batch processing. You will have to code your BDC to follow that sequence of creating infotypes.
T588Z governs the dynamic event processing that will only take place during online user inputs. For BDC's you will have to create separate BDC's to handle any infotypes that are inserted dynamically by this table.
T588M Infotype Screen Control
***********please reward points if the information is helpful to you*************

Changes not reflected in table CDHDR/CDPOS using production order(CO02)

Hi experts..
i want to extract all the changed\new entries from table RESB (reservation table). The object class for this table is ORDER. I m using CDHDR/CDPOS tables for retrieving the changes. But the changes reflected in RESB using Service Order transaction (iw32) only is getting updated in CDHDR/CDPOS, not through Production Order transaction (co02). Any idea about this problem ?

Hi,
Refer this wiki code ALV Grid Display with checkbox to process selected records at runtime, it will definitely help you:-
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/alv%252bgrid%252bdisplay%252bwith%252bcheckbox%252bto%252bprocess%252bselected%252brecords%252bat%252bruntime
Regards,
Tarun

Regarding the table cdhdr

Hi All,
i want to see the changes made to the salesorder in CDHDR table how can i see i.e what are the values need to pass to the CDHDR table and in which fields in table i need to pass,
Regards
krishna

Call transaction SCDO you will get a list of document objects, look for "Sales document" you get the code : VERKBELEG.
You could also call transaction SE16 on table TCDOB "Objects for change document creation", and select the record with TABNAME = 'VBAK' or 'VBAP'.
If you look the data in your system, yon can find how to fill the OBJECTID field. Its VBAK-VBELN in internal format (that is with leading zeroes)
Else go back to SCDO and display "Generation Information", you get the update task function module that updates the database "VERKBELEG_WRITE_DOCUMENT". Go to SE37 and use Where-used you will get the calling programs, here only a routine CHANGE_DOCUMENT_CREATE of program include MV45AF0C_CHANGE_DOCUMENT_CREAT call the function module, double-click on the call and you find the code
MOVE VBAK-VBELN TO DA_OBJECTID
Regards

Is there any Customer Jobs Table in SAP?

Hi All,
In QuickBooks , there is a table for Customer Jobs(Jobs done for a customer). This is to calculate sales commission for Sales rep. How is this related in SAP?
Is there any table or fields in any table? or whether its not related in SAP?
Give me Details Soon
Thanks in Advance
Janakiraman

Sorry for the late reply!
In SAP Business One you can post an A/R Invoice of type "Service" to reflect such a kind of thing.
Each document in B1 is connected to a sales person.
Or an A/R Invoice could be connected to a "Service Call" which is connected to a particular employee etc. etc.
Does this answer your question?
Regards,
Frank

Jobs table

Hi all.
Which table contains the system jobs list ?
I would like to watch old jobs executions.
Thanks all,
Sam

Hi,
Check TBTCO table. It contains the system jobs list
Regards,
Jyothi CH.

Jobs related issue (how table BDCP updated)

hi expert,
job xxxxx is running in R/3 which update other system (3plp).
The main concept is that. Whatever changes taken place in master
Data this change is passes through Idoc to other system.
My issue is related to customer master data. Job is including those
customer( 321304) which have not been change. I can see this customer
number in job spool. But when I see changes in customer master (321304)
there is no change on that date. So this behavior is wrong.
Job must include those customers who are changed on that date.
Jobs is running fine for more customer but, not working fine for few customer
In ABAP analysis I found that
the program it calls the standard Function Module CHANGE_POINTERS_READ. The function module outputs the customer 321304 and change pointer number 198919387. But when I checked this customer, it hasnu2019t been changed since 2007.
Then I checked table BDCP (for change pointers) and got this:
I donu2019t know how table BDCP was updated and why change pointer 198919387 was created for KNA1.
Regds
alicia k

Hi Alicia,
Kindly check this to find how BDCP gets updated.
Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
Change pointers are log entries to table BDCP which are written every time a transaction modifies certain fields.
Dont forget to reward points if found useful.
Thanks,
Satyesh

Joining vbak to cdhdr table for document changes

Hi Expert
I am hanging for a week in this project please need some advice
I want to join vbak table with cdhdr and select
vbak.vkbur (plant) and want to show that vkbur in the internal table of it_cdhdr
so as to select only those plant belong to vkbur so how can I join base on the below coding................
REPORT ZCHGDOC
NO STANDARD PAGE HEADING LINE-SIZE 120.
WRITE: sy-title, 40 'Page', sy-pagno.
ULINE.
TABLES: CDHDR,
         CDPOS,
         t001w,
         "VKBUR,
         "VBELN,
         VBAK,
         VBAP.
SELECTION-SCREEN BEGIN OF BLOCK DOCUMENT WITH FRAME TITLE TEXT-701.
SELECTION-SCREEN END OF BLOCK DOCUMENT.
SELECT-OPTIONS:
                 V1 FOR VBAK-VKBUR,
                 S_WERKS for T001W-werks,
                 objectid for cdhdr-objectid,
                 udate for cdhdr-udate.
PARAMETER: USERNAME LIKE CDHDR-USERNAME.
DATA: BEGIN OF IT_VBAP OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         VBELN LIKE VBAP-VBELN,
          END OF IT_VBAP.
DATA: BEGIN OF IT_CDHDR OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         USERNAME LIKE CDHDR-USERNAME,
         UDATE LIKE CDHDR-UDATE,
         UTIME LIKE CDHDR-UTIME,
         FNAME LIKE CDPOS-FNAME,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDHDR.
DATA: WA LIKE LINE OF IT_CDPOS.
DATA: BEGIN OF IT_CDPOS OCCURS 0,
         OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
         OBJECTID LIKE CDHDR-OBJECTID,
         CHANGENR LIKE CDHDR-CHANGENR,
         TABNAME LIKE CDPOS-TABNAME,
         TABKEY LIKE CDPOS-TABKEY,
         FNAME LIKE CDPOS-FNAME,
         VALUE_NEW LIKE CDPOS-VALUE_NEW,
         VALUE_OLD LIKE CDPOS-VALUE_OLD,
END OF IT_CDPOS.
Move-corresponding it_cdhdr to wa.
Move-corresponding it_cdpos to wa.
SELECT OBJECTCLAS
        OBJECTID
        CHANGENR
        USERNAME
        UDATE
        UTIME FROM CDHDR
        INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
WHERE OBJECTCLAS = 'VERKBELEG' or
      objectclas = 'BETRIEB'
      ORDER BY UDATE.
WHERE OBJECTCLAS = 'VERKBELEG'
OR OBJECTCLAS = 'BETRIEB' ORDER BY UDATE.
Filter data based upon Plant selection criteria.
IF NOT S_WERKS[] IS INITIAL.
DELETE IT_CDHDR WHERE NOT OBJECTID IN S_WERKS.
ENDIF.
IF IT_CDHDR[] IS NOT INITIAL.
   SELECT OBJECTCLAS
          OBJECTID
          CHANGENR
          VALUE_NEW
          VALUE_OLD
          FNAME
          TABNAME
          TABKEY
          FROM CDPOS
          INTO CORRESPONDING FIELDS OF TABLE IT_CDPOS
          FOR ALL ENTRIES IN IT_CDHDR
          WHERE
          OBJECTCLAS = IT_CDHDR-OBJECTCLAS
          AND OBJECTID = IT_CDHDR-OBJECTID
          AND CHANGENR = IT_CDHDR-CHANGENR.
          "or tabname = 'VBAP'.
   SORT IT_CDPOS BY OBJECTCLAS OBJECTID CHANGENR.
ENDIF.
Add tables CDPOS DATA TO CDHDR.
DATA: INDEX TYPE i.
LOOP AT IT_CDHDR.
   INDEX = SY-TABIX.
   READ TABLE IT_CDPOS WITH KEY OBJECTCLAS = IT_CDHDR-OBJECTCLAS
   OBJECTID = IT_CDHDR-OBJECTID
   CHANGENR = IT_CDHDR-CHANGENR BINARY SEARCH.
   IF SY-SUBRC = 0.
     IT_CDHDR-VALUE_NEW = IT_CDPOS-VALUE_NEW.
     IT_CDHDR-VALUE_OLD = IT_CDPOS-VALUE_OLD.
     MODIFY IT_CDHDR INDEX index TRANSPORTING value_new value_old.
   ENDIF.
   WRITE:/ SY-DATUM,SY-UZEIT,
          50 'DOCUMENT CHANGE REPORT',
         80 'Page', SY-PAGNO,
" WRITE: / SY-REPID
          50 'DETAIL REPORT BY PLANT '.
   SKIP.
   ULINE.
*& T O P - O F - P A G E *
WRITE:/ 'UDATE:' ,SY-DATUM.
FORMAT COLOR 4 INTENSIFIED on.
Write: /35                           ' DOCUMENT CHANGES REPORT '.
   WRITE: /5 'DOCUMENT-NO'.
20 'TABNAME', 30 'TEXT_CASE', 50 'FNAME'.
   WRITE: /5 'DATE', 20 'FNAME', 45 'CHANGE-NO',65 'OLD-VALUE',80 'NEW-VALUE',95 'USER-NAME'.
   ULINE.
   LOOP AT IT_CDHDR INTO WA.
   on change of wa-objectid.
   Write: / wa-objectid UNDER'DOCUMENT-NO' ."color col_key.
   ENDON.
ULINE.
     " CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
     write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-fname under'FNAME' NO-GAP,wa-changenr under 'CHANGE-NO',
     wa-value_old under'OLD-VALUE' LEFT-JUSTIFIED NO-GAP,
     wa-value_new under'NEW-VALUE' LEFT-JUSTIFIED NO-GAP ,wa-username under'USER-NAME' NO-GAP.
ENDON.
Move-corresponding it_cdhdr to wa.
*Write: / wa-objectid UNDER'DOCUMENT-NO' "color col_key.
*" CDPOS-tabname UNDER'TABNAME', CDPOS-TEXT_CASE UNDER'TEXT_CASE',CDPOS-fname UNDER'FNAME'. "color col_key ,
*write: / wa-udate dd/mm/yyyy under'DATE' NO-GAP,wa-utime under'TIME' NO-GAP,wa-changenr under 'CHANGE-NO',
ltrim(wa-value_old) under'OLD-VALUE' NO-GAP,
*wa-value_new under'NEW-VALUE' NO-GAP ,wa-username under'USER-NAME' NO-GAP.
   ENDLOOP.
ENDLOOP.

Hai everybody.
I am new to this forum. i got a job in abap recently. The below is my requirement.I want solution for this one. Anybody plz help me.
The change logs were captured in DBTABLOG for table ZWPRFRUND (in transaction ZWPG).
The only report which is currently used to get the change logs is RSVTPROT
Now my requirement is,
we need to display the change logs in the form of ALV.
We should divert the changes to CDHDR table instead of DBTABLOG, then we can use the RSSCD100 to display change logs.
The Important items for the change LOG needed in case of changes to table in ZWPG are,DATE ,TIME,USER,FIRST NAME,FILED NAME,OLD VALUE,NEW VALUE
The above fields need to be displayed in the grid. In the above list FIELD NAME denotes any field of the table in the transaction in ZWPG
Thanks & Regards,
Sujatha.T.

C# - What's wrong with a table called JOBS? :(

Post Author: Gee
CA Forum: .NET
Hi
I've just moved up to .NET 2005. and am having a big problem right now with one report in particular.
The report uses an Oracle table called "JOBS". It worked just fine in .NET 2003. Now though, it comes up with the dreaded field name not known error.
So, I tried to just do a completely new report with just ONE field from the JOBS table on it. It doesn't want to know!
I then copied (so it was IDENTICAL) the table structure and data to a new one called "JOBSTEST". The simple report worked (once I'd changed it to use the JOBSTEST fields of course)
I deleted the original JOBS table, copied a new JOBS table from the JOBSTEST table and... it didn't work again!
So, what's wrong with having a table called "JOBS"? Because that seems to be the problem!
Oh... it works ok on the development machine. Just not any other. ALL other reports work fine!
Thank you so much for your time in helping me

Post Author: Gee
CA Forum: .NET
Hi
I've just moved up to .NET 2005. and am having a big problem right now with one report in particular.
The report uses an Oracle table called "JOBS". It worked just fine in .NET 2003. Now though, it comes up with the dreaded field name not known error.
So, I tried to just do a completely new report with just ONE field from the JOBS table on it. It doesn't want to know!
I then copied (so it was IDENTICAL) the table structure and data to a new one called "JOBSTEST". The simple report worked (once I'd changed it to use the JOBSTEST fields of course)
I deleted the original JOBS table, copied a new JOBS table from the JOBSTEST table and... it didn't work again!
So, what's wrong with having a table called "JOBS"? Because that seems to be the problem!
Oh... it works ok on the development machine. Just not any other. ALL other reports work fine!
Thank you so much for your time in helping me

SPM Job + table CDHDR

Similar Messages

Maybe you are looking for