Spool visible in sp01 but not available in sm37

Hi group,
I am facing the following problem. There is a pgm that creates two spool requests, and they are visible when i see it in sp01, but when we see it in sm37 only the last spool request is available. Pls help.
Regards,
Divya.

The job status is complete and both the requests are available in sp01. but when we display the spools in sm37 just the last spool is available.
This is the sample code
REPORT zspoolreq1                               .
DATA: w_param       LIKE pri_params,
      w_valid,
      w_text        LIKE pri_params-prtxt.
PERFORM open_spool.
PERFORM open_second_spool.
FORM open_spool .
NEW-PAGE PRINT ON PARAMETERS w_param NO DIALOG.
WRITE: / 'First Spool Request'.
NEW-PAGE PRINT OFF.
ENDFORM.                    "open_spool
FORM open_second_spool.
NEW-PAGE PRINT ON PARAMETERS w_param NO DIALOG.
WRITE: / 'Second Spool Request'.
NEW-PAGE PRINT OFF.
ENDFORM.
null
Message was edited by:
        divya rajendiran

Similar Messages

Schedule lines present on R/3 but not available on BW.

Schedule lines present on R/3 but not available on BW.
It is observed that some schedule line records are uploaded to BW with recordmode R causing deletion from ODS, though they are present on R/3 side (in EKET). We use 2lis_02_scl to upload schedule line data system BI 7.0. Anyone faced such problem?
Points shall be assigned if found helpful.

Kalyan ,
refer to oss notes : 690106
here he talks about what is the real motive for changing R mode to X mode .
So but this notes does an undo operation for the same .
We need to re do the same again in start routine if we want to maintain the deleted records . Also search the OSS by giving the data source name & record mode R , then you will also get the original problem in extractors with R mode .
i forgot about the OSS numbers
-Sourav

HT201272 How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The album shows as purchased on the iTunes store, but not available to download to my authorized devi

How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer

When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.

I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

If Yosemite is not available to you, your system may not meet the minimum requirements.
How to install OS X Yosemite on your Mac - Apple Support

TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
any thoughts anyone??

Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

SLDAccess set to true, but not available

Hi all,
I get the following error when Running a Proxy to mail Scenario.
This happens in the Call adapter pipeline Step of the receiver mail adapter.
error message "com.sap.engine.interfaces.messaging.api.exception.ConfigException: SLDAccess set to true, but not available"
I did the Following:
1. tried SLDCHECK -
works fine
2. XIAFUSER/PIAFUSER is not locked.
3. The SLD is reachable
4. XI business system has correct "Pipeline URL" parameter defined
What could have gone wrong.
Any help would be appreciated.
Regards
Abhishek

Hi,
Check the doc and links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a
Note 768148 - Using a separate SLD
Note 720717 - Reduce the number of System Landscape Directories (SLD)
Note 936318 - Dividing a SLD instance
Note 935474 - Consolidate SLD instances
Regards,
Phani

MPPE required but not available

Hi,
Seems like this issue is recurring on the discussion board.
I am running pptp-vpn on an osx server 10.5.7, which is also an OD master.
EDIT: Should add that I was using my OD accounts to VPN, not local accounts.
Until yesterday, the pptp-vpn worked. But today I get this error (I did some changes to the DNS server yesterday, and shutdown the OD replica, probably what caused it):
"MPPE required but not available."
Logs here:
#Start-Date: 2009-07-31 09:28:31 CEST
#Fields: date time s-comment
2009-07-31 09:28:31 CEST Loading plugin /System/Library/Extensions/PPTP.ppp
2009-07-31 09:28:31 CEST Listening for connections...
2009-07-31 09:28:54 CEST Incoming call... Address given to client = 10.3.10.1
Fri Jul 31 09:28:55 2009 : Directory Services Authentication plugin initialized
Fri Jul 31 09:28:55 2009 : Directory Services Authorization plugin initialized
Fri Jul 31 09:28:55 2009 : PPTP incoming call in progress from 'HEREWASMYCLIENTIP'...
Fri Jul 31 09:28:55 2009 : PPTP connection established.
Fri Jul 31 09:28:55 2009 : using link 0
Fri Jul 31 09:28:55 2009 : Using interface ppp0
Fri Jul 31 09:28:55 2009 : Connect: ppp0 <--> socket[34:17]
Fri Jul 31 09:28:55 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xfebd0071> <pcomp> <accomp>]
Fri Jul 31 09:28:55 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc1569522> <pcomp> <accomp>]
Fri Jul 31 09:28:55 2009 : lcp_reqci: returning CONFACK.
Fri Jul 31 09:28:55 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xc1569522> <pcomp> <accomp>]
Fri Jul 31 09:28:55 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xfebd0071> <pcomp> <accomp>]
Fri Jul 31 09:28:55 2009 : sent [LCP EchoReq id=0x0 magic=0xfebd0071]
Fri Jul 31 09:28:55 2009 : sent [CHAP Challenge id=0x87 <90748838ee766580e2607fe03aabb64d>, name = "MYSERVERHOSTNAMEHERE"]
Fri Jul 31 09:28:55 2009 : rcvd [LCP EchoReq id=0x0 magic=0xc1569522]
Fri Jul 31 09:28:55 2009 : sent [LCP EchoRep id=0x0 magic=0xfebd0071]
Fri Jul 31 09:28:55 2009 : rcvd [LCP EchoRep id=0x0 magic=0xc1569522]
Fri Jul 31 09:28:55 2009 : rcvd [CHAP Response id=0x87 <ed961c48a2d2bf4a740d5bc5c8fe52120000000000000000fad480211366fb8d7360a82a1cfe50 c9e994fe5f85c9166900>, name = "larsrohdin"]
Fri Jul 31 09:28:55 2009 : sent [CHAP Success id=0x87 "S=EB025BB4770A6FF010F57860F8B00FDE74FDDC00 M=Access granted"]
Fri Jul 31 09:28:55 2009 : CHAP peer authentication succeeded for larsrohdin
Fri Jul 31 09:28:55 2009 : DSAccessControl plugin: User 'larsrohdin' authorized for access
Fri Jul 31 09:28:55 2009 : MPPE required, but keys are not available. Possible plugin problem?
Fri Jul 31 09:28:55 2009 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
Fri Jul 31 09:28:55 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S +L -D -C>]
Fri Jul 31 09:28:55 2009 : rcvd [LCP TermAck id=0x2]
Fri Jul 31 09:28:55 2009 : Connection terminated.
Fri Jul 31 09:28:55 2009 : Connect time 0.0 minutes.
Fri Jul 31 09:28:55 2009 : Sent 0 bytes, received 0 bytes.
Fri Jul 31 09:28:55 2009 : PPTP disconnecting...
Fri Jul 31 09:28:55 2009 : PPTP disconnected
2009-07-31 09:28:55 CEST --> Client with address = 10.3.10.1 has hungup
I have tried everything in this thread:
http://discussions.apple.com/thread.jspa?threadID=1286988&tstart=0
and this one:
http://discussions.apple.com/thread.jspa?messageID=6560466
But no luck.
Any ideas? Anyone? Really do not want to reinstall my server again.
Or as another solution, is there any third party pptp-servers out there for osx server, as this one is really unreliable.
Best Regards,
Lars Rohdin
Message was edited by: larsrohdin

Tyghe got it right, HOWEVER, if your OD is munged for any reason OR there are more than one user, you many need to be more 'invasive' about cleaning up and then fixing this issue
If you run the command `vpnaddkeyagentuser /LDAPv3/<od servername>` and it just keeps prompting me like it isn't authenticating, you OD is probably either unstable or non functional. Probably needs an archive and demote-promote.
If you run the command and it runs without prompting me for any username or password and adds an entry into the system keychain but does not create a user on the OD server, it is probably similar to issue as above.
The way I would deal with this is to clear the keychain of EVERY entry, then open WGM, delete all the VPN MPPE users, and try the command again. There will only be one user that contain the 'secret' password for MPPE use, attached to VPN and the password is placed in to the keychain, all others are now dead.
Peter

Change the pwd of the WBEM client:SLDAccess set to true but not available

Hello,
I checked on ABAP side with transaction SLDCHECK, everything fine.
Then checked http://server:port/sld/ListServlet?bsview=true
*Please find the log content below:*
WARNING com.sap.lcr.cimsrv.ChangePasswordServlet: Password Change that service client users don't have initial passwords.Alternatively, logon to the SLD user interface with the corresponding user and assign a new password client settings must be updated accordingly.
So suggestion was to change the WBEM client password.
Due to the above scenario, *Error in SXMBMONI*_ is:
com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available
Can anyone let me know how to resolve this issue.
Thanks in advance.
Ganesh Karicharla

HI ganesh
check this thread for reference
Unable to find an associated SLD element
regards
kummari

SLDAccess set to true, but not available - http to RFC Scenario

Hello Experts,
I have created http to RFC scenario in DEV system and it is working fine.
But after transporting the scenario to QAS system. It is giving following error.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: SLDAccess set to true, but not available
Please advice on this ...
Thanks ,
Vishal

There could be many things that could be checked.
1. Perform SLDCHECK and look for inconsistencies.
2. Check if service user XIAFUSER is locked or not.
3. Perform a full CPACache refresh.
Regards,
Prateek

Upgrade requested but not available

I purchased full Acrobat XI Standard, downloaded and installed. Now an upgrade with serial number is requested but not available. How can I resolve?

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link about why you are prompted to enter a serial number which may help

Full list of MS SQL 2000 features that are supported in compatibilty 80 mode but not available in 2008 R2 compatibility 100

Hello Everyone,
Could you possibly suggest where I can find a full list MS SQL 2000 features that are supported in 2008 R2 compatibilty 80 mode but not available in compatibility 100?
Thanks
SSIS question

Hi Tom,
What you are saying makes sense, if the compatibility level is 90 then the old ANSI joins are expected to be rectified.
I wrote a script to check - it's an easy exercise, all you need is to loop through the catalog views and for each SP or scalar function run this command:
set fmtonly on exec <object> set fmtonly on and in the catch block handle the error related to compatibility.
For checkign the views similar thing set noexec on <select top 1 * from view> set noexec off.
This works very fast as none of the code is actually executed.
Caveat thought triggers and table functions. I could not find the way how to check them. so will have to extract the DDLs and just check the text for old ansi joins. Not very reliable, but that's all I can think of at the moment.
Any chance you know how to compile a trigger or table function without running.
For table functions when I tried set noexec on they still asked for parameters, something I was trying to avoid.
Thanks
SSIS question

Spool list not available from SM37

Hi All,
We have scheduled a job and running successfully.
But spool list not displayed from SM37, whereas spool request generated in SP01 at the same time when the job is completed.
We've checked with the developer and they dint find anything wrong from program end.
Kindly suggest what is going wrong here.
Thanks in advance......

Hi,
Apply the following SAP notes to resolve this problem:
1372936 - Spool lists no longer displayed from SM37 after SP
1174127 - Job refers to incorrect spool request
regards,
Aidan

TS1538 Running Windows XP,Ipod Mini works fine,but Ipod Nano visible in Windows,but not Itunes.Have loaded latest version of ITunes.How do I prceed

Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.

http://support.apple.com/kb/TS1363

PDF images visible in Adobe but not Preview or Mac Mail's Quick Look

I have a PDF that I am inserting an ad into. I copy and paste the ad from one PDF into another. The problem I am having is when I have the final 10-page PDF with the ad inserted in it, you can open the 10-page PDF in adobe and the ad will be visible, but if you open it in Preview or using Mac Mail's Quick Look, the ad isn't there. When I open the original file with the ad in it (that I copied and pasted the ad from) in Quick Look or Preview, the ad appears. I need to know why the ad isn't showing up after it is copy and pasted into a new PDF?
files can be viewed below or at this address:
http://6letters.com/help/
"lanai3_Grand Jewels-001Winning.pdf" is the document I am copying the ad from
"lanai_122211.pdf" is the document I am pasting the ad into. The ad is on page 10. The ad is viewable in Adobe Acrobat but not in Preview or Mac Mail's Quick Look.
I am using Adobe Acrobat Pro 9 (version 9.4.6) to do the copy/paste/save.
I just clicked the above link and the ad doesn't show up online now either. It is supposed to be in the blank space on page 10.
Any help much appreciated!!!!!!

Hi,
Acrobat 9 and older versions paste images as a stamp/comment which (that poorly functional) Preview cannot see, so you need to "flatten" the page if you want to see a pasted picture in Preview.
(Preview, Mail and QuickLook shares the same rendering library)
You can easily flatten one or several pages in a PDF using this free tools: http://abracadabrapdf.net/articles.php?lng=fr&pg=717

Spool visible in sp01 but not available in sm37

Similar Messages

Maybe you are looking for