Spooled printing job getting automatically deleted in 10 sec

Connected Printer: HP Deskjet 3820/3822 Operating System: Microsoft Windows XP Connection Port: ParallelCheck of the driver setting shows no problem. However whenever I am trying to print a Notepad or word document, it is spooling to the printer -- printer window is showing status -- "printing" -- then in 10 sec the status automatically changing to --- "deleting" print job! Any suggestion?

I have the exact same problem, with all my HP Photosmart and all in one printers? Did you ever get this resolved?
could you let me know what the repair is if you know i would greatly appreciate it.
Tim Wolter
[email protected]
Thx

Similar Messages

Print job will not delete

A print job will not delete from my computer despite several restarts of both the computer and printer.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter.
Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

SMW2 - Inbound , need to set STOP jobs to automatically delete

Hi
We set the system to receive data from ECC 6.0 system to SRM to inbound queue (SMQ2). There was specific data that we needed for processing and the other set to STOP in SMQ2. The ones that are in the QUEUE are holding back the the active one. We have to delete the STOP jobs to for the active one to process. Is there a way of setting a schedule for STOP job to automatically delete
Regards
Naziem Mahomed

usually a queue is stopped , if there is any problem.
You need to resolve the problem in the queue , and then once that is resolved... ,following queues will go through.
how ever it is not possible to automatially remove the stop queues , unless you have custom program to remove the stopped entries...

Print job won't delete on my 8600

I have a print job in my que that is stuck in delete mode. I did change print cartridges halfway through that print job, though I am pretty sure it did get finished the other day.

I have a Dell C3760dn printer set up as a network printer on my server. 2003. There is a print job that will not delete. Two questions:1) short of uninstalling and reinstalling this printer, how do I get the document to delete? I've gone into the control panel, Devices & Printers, found thenetwork printer, right clicked, cancel all documents. Didn't delete.I have stopped, restarted the print spooler, there's nothing in the Windows\System32\spool\PRINTERS file. I've tried deleting the document in the queue directly from my server and from the end user that generated the print job. I've turned off the printer, restarted print spooler, tried to delete the document...nothing.I have tried everything and it just will not delete. I don't want to have to uninstall and reinstall this printer every time a doc from this one user hangs up. Is...
This topic first appeared in the Spiceworks Community

Print job will not delete, which halts other print jobs

Maddening issue with some print jobs sticking in print que, then failing to delete when attempting to clear que, which halts any print jobs that follow. Que shows "deleting" but in reality it does not delete. I have tried to go into spooler system and it seems to work when I hit "Stop" then "Start," but do NOT want to have to do this every time. thx for any help.

On order to clear the Spool, the easiest way is to turn off your printer,
Reboot your PC and then cancel all the documents from the Printers screen.
After the documents has been removed, turn the printer back on.
As the issue ocours more often, please let me know your printer model, how it is connected to your PC and your operating system version, it will help to better understand any possible cause.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Print Jobs not clearing "Deleting - Printed" message from Print Queue

The jobs print fine but the message Deleting - Printed doesn't clear from the print queue.
The two printers having the issue are HP Color LaserJet 3550s using the External HP JetDirect en3700 (J7942A-61033).
Our Print Server is an HP BL25P running MS Server 2003 Enterprise Edition / SP2. This issue started about two weeks ago only on these printers. I downloaded the newest drive (dated 2007 version 61.63.461.41).
I have deleted and recreated the printers on the Print server and installed the new driver. Still having the same issue. To clear the Print Queue we have to restart the Print Spooler Service on the Print Server.- this causes the "Deleting - Printed" jobs to print again which could be days / weeks after they were originally printed.
We don't want to keep having to restart the Print Spooler.
Any one having a similar issue and know off a fix. I have tried everything I have so far found on the Web.
Thank you.
Mike

Hello @shumaung , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing print speed issues. I would like to help!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Print job gets to printer and vanishes or goes to the wrong tray

I have one 10.4.11 computer in an office full of 10.4.11 computers and the print jobs either go to the printer and default to tray #1 which is always empty forcing the user to go to the printer and manually redirect the print job to the right tray otherwise the printer waits for input and creates a backup of print jobs for all the other users in the office or the print job goes to the printer and the data light blinks a few times and just vanishes and nothing happens. This happens when printing from the local admin account and the network user account. There are many users in the office and no one else is having this issue, it came up when the HDD was replaced and the system was rebuilt, I used the same image for another rebuild a month earlier and didn't get this issue. printers were added using printer setup utility and bonjuer as always tried adding with the ip address as well. The printers are two HP laserjet 9050's and a color laserjet 5550. I have tried changing every print tray setting I can find, this happens in every app that I have tried as well(cs2 indesign, illustrator, textedit, word) I have tried the reset printing system option in the printer setup utility and have re added the printers any number of times. The wall is still in one pice and my head is getting really sore please help.
B

Hi Brian, and a warm welcome to the forums!
Not sure what it is, Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

I am using outlook 2013 for my emails. My junk emails get automatically deleted. I have had several people say they sent me emails and i can not find them. They are not in any of my inboxs. Can anyone please help

I am using outlook 2013 for my emails. My junk emails are gettting automatically deleted. Problem is i am getting sent emails from schools and others that i
am just not receving. It;s not in any of my inboxe. I am losing alot of important info and don't know why. Please help

If you suspect they are being marked as junk and deleted, turn off the auto-delete. Being that Office is a Microsoft product, you should ask them how to do that: http://www.microsoft.com/mac.

Print jobs pause automatically.

Hello
Trying to print threw my home network (wired with the correct address) on a Canon MP780. Each time I printed the job pauses. I click resume and it pauses again. I downloaded the latest driver from Canon and Gutenprint 5.0.2
appreciate any help
thanks

I have the same general issue, but with slightly different behavior. I print over a network to two different HP laserjets using IP printing. I find I can print just fine from most applications (e.g., Word, PowerPoint) except Adobe applications. When I try to print from Illustrator or Acrobat, the job is sent to the printer and I can see it in the queue. But, as you describe, the printer immediately pauses. If I go into the queue and unpause the printer, then the job immediately stops (the printer doesn't pause, the job stops). If I restart the job, the printer immediately pauses again. It goes back and forth like this forever. This happens on one of the printers I typically use. On the other HP printer I commonly use, the job never pauses, but I get a message in the printer dialog that says: "unable to get printer status (Not Implemented)" On this printer the job is listed as printing, but it never goes anywhere. I have deleted this printer and re-added it, all to no avail.
Note that this happens regardless of whether I use CS3 or an old copy of CS1 that printed fine before I upgraded to Leopard.
I looked on Adobe's web site for a discussion of this issue and found none.

Everytime I download a file other than a pdf, it gets automatically deleted when finished downloading.

I am using Firefox 7.0.1. Shortly after a Firefox update, I noticed that every time I download any type of file except for .pdf files, they automatically get deleted as soon as they finish.
I tried downloading to my c: drive, a flash drive even a CD with the same result. Why does this happen? I also can't open any downloaded attachments I get in e-mails.
I can download files and or e-mail attachments via Internet Explorer with no problems other than it (IE) randomly locks up. I even tried restoring my system to a previous configuration with no luck. Can you help?

You posted this with a computer running a Firefox 7.0.1 according to the system details.
*https://support.mozilla.org/kb/Finding+your+Firefox+version
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

HELP ! Print jobs getting stuck in Queue

Hello:
I am using a HP Deskjet 5550 with two Mac's - an iMac G3 Classic and an iMac G5
Tiger. I have the printer connected to both Mac's. I am using the USB connection for the G3 and the Serial - USB connection for the G5.
I have no problem printing from the G3, but the 5 is getting me frustrated!
The printer prints a few pages and then the rest of the printing gets stuck &
stopped in the Queue. I am using the 2.7.1 driver from the Tiger install DVD,
but I have also tried the drivers from the HP download page.
I have also tried doing a Reset of the printer system. This problem does seem
to be intermitten but it is far worse most of the time then better.
I have looked at the HP Support site, but there is nothing I have found for
this problem. I have also tried using the Printer Sharing on the G5 (Tiger).
Any input/suggestions/ideads most greatley appreciated.

Did it ever work? How did you install the printer? Did you follow these directions on page 12? How did it go?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

All tests print out fine, but all other print jobs get caught in printer as the page exits printer

I have a HP Photosmart D110 printer. Can't print out anything - except tests - without the page getting chewed up on left corner as it exits the printer.
JoanP

Hi you can try the steps on this video
http://h30460.www3.hp.com/?rf=sitemap&fr_story=0d22534555a7583162469f89904ab9e0345bf9ca&jumpid=reg_R...
its a general solution but if after this the issue persist contact HP for a warranty replacement just take note on the steps that you performed so you will not have to do them again

'iTunes Library Extras' and 'iTunes Library Genius' files gets automatically deleted (when iTunes is started up)

I'm working on a Sony VAIO FW-serie model.
Windows Vista
Almost every time I start up Itunes I have to determine that all my music is out of Itunes (still on the original locations but not available in my library).
It happens automatically.
I looked in my 'recycle bin' folder and saw there were a lot of iTunes Library files.. (specifically the ones named in the title)
Can anyone help me with this problem because I always have to remove everything from my iPod because the library is 'refreshed'..
Arne

It's Sony's software: http://support.apple.com/kb/ts2715
Download a newer version, configure it to ignore your iTunes folder or just disable it.
tt2

Production order gets automat. deletion flag if a change in sales order hap

Dear friends,
I have the problem that there is a change in the sales order ( for example the customer) and then the already existing production order receives a deletion flag wich cannot be done undo.
For example, we receive a request for a sales and we create a sales order. Afterwards, we will create the sales order with the customer who gave us the request. Then we can directly start with the Engineering, purchasing and so on. After a period of time, it happens that the "real" customer is know. So, each sales order line item will be deliverd to another customer. This can be relevant for the export control if the customers are located in different countries.
At the time of adding or chanign the new customer and saving the already existing production order will receive the deletion flag.
For me this situation is strange as I would not expect that the production order would receive a deletion flag only because a change in the sales order occurs.
Can please anyone help!?
Thank you very much,
Bjoern

Dear Friends,
thank you very much.
I found the problem and this is actually a funtionality comming from the export control checks. I forwarded this to our export control specialist as I dont see this as a production theme.
The problem was, that the customer was changed and it was a different country. In this case the export control was activated and the online check was not sucsessfull. In this case a production is not allowed anymore and the system directly deletes the production order independing in which status the order is.
Interesting function.
Thank you all!

Production order gets automat. deletion flag if a change in sales order ha

Dear friends,
I have the problem that there is a change in the sales order ( for example the customer) and then the already existing production order receives a deletion flag wich cannot be done undo.
For example, we receive a request for a sales and we create a sales order. Afterwards, we will create the sales order with the customer who gave us the request. Then we can directly start with the Engineering, purchasing and so on. After a period of time, it happens that the "real" customer is know. So, each sales order line item will be deliverd to another customer. This can be relevant for the export control if the customers are located in different countries.
At the time of adding or chanign the new customer and saving the already existing production order will receive the deletion flag.
For me this situation is strange as I would not expect that the production order would receive a deletion flag only because a change in the sales order occurs.
Can please anyone help!?
Thank you very much,
Bjoern

Dear Friends,
thank you very much.
I found the problem and this is actually a funtionality comming from the export control checks. I forwarded this to our export control specialist as I dont see this as a production theme.
The problem was, that the customer was changed and it was a different country. In this case the export control was activated and the online check was not sucsessfull. In this case a production is not allowed anymore and the system directly deletes the production order independing in which status the order is.
Interesting function.
Thank you all!

Spooled printing job getting automatically deleted in 10 sec

Similar Messages

Maybe you are looking for