Spotlight only up-to-date after re-indexing

Ever since I got my (Intel) Mac, Spotlight worked like a charm, but indexed new files only after re-indexing by hand. A friend of mine who doesn't have an Intel based Mac, doesn't have any problems; created files are almost immediately indexed by Spotlight.
Although I think it's a real handy tool, it does slow me down since each re-indexing takes about 15 minutes.
Is this a bug in Spotlight (only for Intel) and is this already on the list at Apple? And is there anything I can do to correct this behaviour?

Thanks Daniel, but the Xlab info doesn't cover this exact problem. Since I had this problem ever since I got my Mac out of the box, I am sure I didn't 'mess around the OS' and I certainly didn't use the Terminal (still haven't actually
Could you tell me how the problem got solved for your students?
The strange thing is that external HD's are indexed as soon as they are recognized by the system, but when I save a simple (new) textfile, Spotlight doesn't put the file in its index until I re-index by hand. I don't have any folders in the Privacy-section, nor are the directories hidden or anything.
Today I used Mac Helpmate, but that didn't do anything for this problem.

Similar Messages

Convert "1D array of dynamic data" to "Dynamic data" after auto-indexing with loop

Hi -
I have a question about how exaclty auto-indexing works with the Dynamic Data type when exiting a while loop. I'd like to use the DAQ assistant to record data through an analog input (on the MyDAQ) and then replay that data through an analog output. This works fine if I use the DAQ Assistant to record data for a set amount of time:
However, I run into trouble when I try to use a While loop with a stop button to record data for an arbitrary amount of time. I set the dynamic data tunnel out of the While loop to "Indexing", but then when it exits the loop, it becomes "1-D Array of Dynamic Data" instead of just "Dynamic Data", and get a broken wire when I try to connect it to the input of the DAQ Assistant. I've also tried converting the dynamic data to Array and Waveform data types inside the loop, but have the same issue (they become 2D Array and 2D Array of Waveform respectively when leaving the loop). Try as I might using blocks like Convert to/from Dynamic Data Type, or Array Subset, I'm unable to get them back down to just Dynamic Data or Waveform, which will be accepted by the DAQ Assistant:
One other small note - I'm not sure if using the "Build Array" function with a shift register accomplishes exactly the same thing as just auto-indexing an array out of the loop - so I've tried both, but still have the broken wire issue.
I'm assuming this is just a simple issue of using the right block to convert "1D Array of [Something]" to just plain [Something]. Any help appreciated.
Attachments:
PWM_FlatSequence.vi ‏101 KB
PWM_FlatSequence_While.vi ‏129 KB

I have been facing problem for all temperature values placing the Write to Measurement File outside the Loop.
In Error message it says" Source: 1D array of dynamic data and Sink: Dynamic data".
Is there any means of convering 1D array of dynamic data to dynamic data?
I would highly appreciate any help.
Attachments:
Temperature Logger.vi ‏110 KB

Spotlight stopped finding files, even after "index". They're visible files, not system files (like.jpg, .xls, .doc). This happened for no apperent reason.

Spotlight stopped finding files, even after "index". They're visible files, not system files (like.jpg, .xls, .doc). This happened for no apparent reason.
Worked well with Yosemite the first week, but now it doesn't.

Any advice would be helpful. Thanks

I was erase all contect and data after it it showing only apple logo from last 2 hour i need help

i was erase all contect and data after it it showing only apple logo from last 2 hour i need help

You should reset your iPhone,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Only show certain fields after a date has passed

How would I set a recordset to only show certain fields after
a date has
passed?
For example:
I have a list of classified adverts some which include an
image which the
client pays extra for. After a certain time period, say, 1
year,
would it be possible to use some kind of IF statement (or
something) to no
longer show the image?
Thanks
Gary

scrap that entire post man.
I'll rewrite it here in a few.
"crash" <[email protected]> wrote in message
news:[email protected]...
>
OK. I can't be as much help as I was hoping, since I
just did this in
> PHP and MySQL. But we can do a bit. My ASP is rusty
enough I'm just going
> to give you what I think you should do.
>
> You'll need to research how to format dates and most
importantly strip
> away the timestamp. In MySQL, you can format the date as
it comes out of
> the recordset. I'm not sure if you can do this in
access, but I would
> imagine that you can (indeed, it might be the same SQL).
>
> <%
> varToday = Date (should be able to format out timesteamp
here);
> varTerm = 365; 'This will be your constant term, defined
in days, it looks
> like from archived posts
>
> varExpiredDate = varToday = varTerm;
>
> Search your recordset via varTerm. ie
> WHERE datefield < <% varTerm %>
>
> You will need to search date formatting in Access to see
how to strip out
> the Timestamp from your date, but you should be able to
do this from your
> SQL statement, and return just the date, this will be
compared to your
> varTerm, which basically states that if your signup date
is beyond a year
> from today, your ad will need to be renewed.
>
> I"m not very happy with this, but it's all my brain is
coming up with
> right now. Gimme a few to review it and I might have
something more for
> you.
>
> HTH, sorry I couldn't give you code or urls for date
formatting.
>
> Additionally, you will eventually need to build
somethign that checks
> images and and dates and then sends an email to your
customer letting them
> know their term has expired.
>
> OR - You could also add a new field to your database
which automatically
> updates an "expire" time in your ad table which
automatically adds days to
> the time. If you do this, you don't have to worry about
stripping
> timestamps or anyting, and you can just do a simple
lookup for if Date >=
> DateExpireField then don't pull image.
>
>
>

After building index is crawler deletes the data from crawl db?

HI
how the search service crawl component works,
each time after building index is crawler deletes the data from crawl db
adil

Hi Adil,
Index Database is usually called Crawl Database.
I found a series of articles which goes through what these components are, how they work together, and how to provision them:
http://blogs.msdn.com/b/russmax/archive/2010/04/16/search-2010-architecture-and-scale-part-1-crawl.aspx
http://blogs.msdn.com/b/russmax/archive/2010/04/23/search-2010-architecture-and-scale-part-2-query.aspx
SharePoint Server 2010 Enterprise Search Evaluation Guide:
https://www.microsoft.com/en-us/download/details.aspx?id=24189
Regards,
Rebecca Tu
TechNet Community Support

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

Storing a lot of data in an indexed data structure for quick access.

I'm designing an app. which will need to store a large amount of data in memory. Records will be flowing into the app. via a socket. The app will receive about 30 records/second which is about 108,000 records/hour and about 600,000 records/day. I need to store the records in an indexed data structure so that I can access them quickly. For example, at 9:00am I will need to access records received at 8:30am, 8:35am, 8:40am, etc. This program will be multithreaded and as I understand Vector is the only data structure that is thread safe. Is Vector my only choice? How do I access objects in a Vector using an index? Is there something better that I can use?

Is Vector my only choice?If you want to access the objects by key then you should use something like a HashMap. But if you want to access them by an array index then an ArrayList would be more appropriate.
as I understand Vector is the only data structure that is thread safeYou can get a thread-safe version of any Collection object by using the Collection.synchronizedCollection method.
How do I access objects in a Vector using an index? I'd suggest you read the API documentation. And probably the Sun tutorial on Collections at http://java.sun.com/docs/books/tutorial/collections/index.html
600,000 records/day. Unless you plan to dump old data after a short period of time, you may want to consider using a database to avoid running out of memory.

Spotlight only showing results of 1 partition

I skipped lion and went from Snow Leopard to Mountain Lion. I am using a 1tb External HD. If I type "screen shot" into spotlight, it only shows the files on 1 of the partitions (there are 4 partitions on the drive) The one thing I noticed is that if I open a file from one of the other partitions, after doing so, that file will now also show up in spotlight. So to sum it up, spotlight only shows files from 1 partition, and files from the other partitions I've opened since I updated to Mountain Lion
Any Ideas?

Re-index SpotLight
go into disk utility, select your OS X hard drive, click "repair disk permission". wait until it's done.
after that, go into terminal and type copy & paste:
sudo mdutil -E /
after that, terminal will prompt you for your password. type it in (no letters will actually appear but just type your password and press enter).
your spotlight index should then be recreated.

Problems query data after data migration to Hana

Hi We currently have 2 BW environments: Release: 701 SP-Level: 0014 Support Package: SAPKW70114 DB: No Hana Release: 740 SP-Level: 0005 Support Package: SAPKW74005 DB: Hana It was necessary to migrate data cubes BW 701 -> BW 740, because in ECC only history of the last 18 months is maintained. After this migration, when I make a query in Query Designer and I use between in "Filters and Restrictions" no returned values, but if I include the value and not use the between the values are displayed. For example: I created a query with: one key figure, Comp_Code, Material and Fiscper. On filters and restrictions I informed that should return only the materials between 0001 and 0003. When running the query does not return values, but if I change the filter to only return materials 0001, 0002 and 0003, the query returns data. Note .: This problem occurs only with the migrated data from the BW 701, loads of ECC deltas are functioning normally. Could you help me solve this issue? Best Regards

Important point: I found that if you run the query in RSRT "Execute + Debug" button and do not use the option "Do not use SAP HANA / BWA Index (0)" the query runs without problems.
Additional Information:
- BW on Hana environment 740 is a new installation.
- To load the historical data for the BW on Hana was created an RFC with the BW 701, classic BW as source system to new BW HANA.
- BW 701 was generated Export Data Sources ( From cube to cube, from DSO to DSO) and we used of data sources to migrate historical data.
- Then BW on Hana is a new installation, but only the historical data were extracted from the BW 701 (no Hana)
- Export Data source generated on DSO data is ok, but the Data source of export from a cube, data is not ok. After data load this historical data, when I make a query in Query Designer and I use between in "Filters and Restrictions" no returned values, but if I include the value and not use the between the values are displayed, but the problem occurs only in the query on the Cube.
- Are there any recommended when historical data is extracted on the Cube by Export Data Source?

Spotlight only English?

When I use Spotlight to find standard applications like the Console, or Keychain Access, I always have to use the english Name of the programm instead of - as in my Case - the German one, to find it.
I already deleted the Spotlight Index and let it rebuild. Also the language settings should be correct with "Austrian German" first, "German" second and "English" third.
Still Spotlight only finds the Applications with the english Name. The System is installed with the right Languages and everything else is in German.
Anybody got an Idea how to solve this?
Message was edited by: Feierteifl80

Weird, figured it out.
Under languages i only had Australian English. I added British English and English after and it solved the problem.
Weird bug.

Can we preview data after RKM in SAP in ODI 11g

can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ??
Edited by: Drona on Mar 16, 2012 1:06 PM

No we cannot preview the data as SAP connection is made using Jco adapter.
We can only preview the data for data servers which are connected using jdbc.

Can not pass data after while loop

Hello.
I have created a VI for my experiment and am having problem passing data outside a while loop to save on an excel file. The VI needs to first move a probe radially, take data at 1mm increment, then move axially, take data radially at 1mm increment, then move to the next axial position and repeat. It would then export these data to an excel file. The VI is a little complicated but it's the only way I know how to make it for our experiment. I have tested it and all the motion works correctly, however I can not get it to pass the data after the last while loop on the far right of the VI where I have put the arrows (Please see the attached VI ). Is it because I'm using too many sequence, case, and while loops? If so, what other ways can I use to make it export data to the excel file?
Any help would be appreciated.
Thank you,
Max
Attachments:
B.Dot.Probe.Exp.vi ‏66 KB

Ummmm .... gee, I'm not even sure where to begin with this one. Your VI is well .... ummmm... You have straight wires! That's always nice to see. As for everything else. Well... Your fundamental problem is lack of understanding of dataflow programming. What you've created is a text program. It would look fantastic in C. In LabVIEW it makes my heart break. For a direct answer to your question: Data will not show up outside a while loop until the while loop has completed. This means your most likely problem is that the conditions to stop that specific loop are not being met. As for what the problem is, I don't even want to start debugging this code. Of course, one way to pass data outside of loops is with local variables, and hey, you seem to be having so much fun with those, what's one more?
This may sound harsh, and perhaps be somewhat insulting, but the brutal truth is that what I would personally do is to throw it out and to start using a good architecture like a state machine. This kind of framework is easy to code, easy to modify, and easy to debug. All qualities that your code seems to lack.
Message Edited by smercurio_fc on 08-17-2009 10:00 PM

Can I select the data of the indexes?

Hi everybody,
Oracle storages indexes in index type segments as I know.
Is it possible to see the data of these index segments like a table or view?
So I would like to see not only the structue of it with:
select * from dba_segments SG where SG.segment_name = ’index_name’
I think something like this:
For example if I have a table named Table1.
(please don’t see the format of the rowid):
Rowid....field1
1_1.......AA
1_2.......AB
1_3.......BB
and I have an index on field1 named ndx_t1_f1.
Create index ndx_t1_f1 on Table1(field1);
I would like to see something like this
(if it is a simple Btree index like the ndx_t1_f1):
Select * from some_schema.???ndx_t1_f1???
Rowid..........ParentRowid..........ValuePrefix..........SolutionRowid
2_1
2_11............2_1.......................A
2_12............2_1.......................B
2_111..........2_11.....................AA......................1_1
2_112..........2_11.....................AB......................1_2
2_121..........2_12.....................BB......................1_3
And if i run:
select field1 from table1 where filed1 like 'B%'
oracle can use ndx_t1_f1 index like this:
2_1 -> 2_12 -> 2_121 -> BB
Yes, I know, there are some promlems with this imagine, but is it possible, or is it a silly question?
Thanx: lados.

Hi,
You asked: „Why do you want to do that?”
Well, I have a table T with fields F1, F2, F3 ...
If I run:
select F2, T.* from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But if I run:
select F2, F1 from T where F1=12345;
the result is one record and the value of F2 is ‘B’.
And this is the same record. Oppps!!!!!
I think the cause of the problem is the next:
I have an index on F1, F2 named ndx_T_F1_F2
In the second case: oracle uses only the index blocks and no table blocks, because all asked data exists in the index blocks.
In the first case: oracle uses the table blocks too, because I asked all field.
And I think there is a corrupted data on the index.
I created a new index on (F1,F2,F3), and I suggest to use this.
select /*+index(T, ndx_T_F1_F2_F3)*/ T.F2 from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But what is strange, oracle didn’t realise this inconsistent situation.
(It could be an earlier crash, I don’t know, I’m new at this workplace)
I think, the problem can solve with recreating the index ndx_T_F1_F2.
But it’s a very special situation for me, and I would like to see the corrupted data concretly with my eyes.
I think, that
Select * from some_schema.???ndx_t1_f1???
would I see like a view, but it would based on procedures and not tables.
It would be enough to me, because I only could see the data in the index.
But it is impossible as you wrote, isn’t it?
Thanx: lados.

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Spotlight only up-to-date after re-indexing

Similar Messages

Maybe you are looking for