SQ01 mass generation of quries problem

i need a sample code or FM for mass generation of SQ01 quries.bcz aftter changing in client i have to regenerate again all quries..so i want some workaround so i can perform this task in one go. any idea?

Hi,
i do not understand why this post is marked as "answered".
The recommended ABAP RSAQR3TR is not usable for the requested mass generation of queries.
(It only covers the transport aspect (export/import))
Can you please give us a short explanation or correct the status to "not answered"
There are two posts regarding the mass-generation of queries, but none of them contains a solution.
SQ01 - Generate program
Query - Mass generation
(The first one is at least a chance and usable via CATT or SE37)
Best regards
Christian

Similar Messages

Su25 - mass generation of roles

Hello,
I have one problem in my upgrade project that...my client has done the upgradation but he has not done that su25 2a - 2d steps....noe i want to do that 2c steps to complete
when i clicked it 2c steps in su25 it shows me long list of roles to be maintained ...os is there any way to do maintainance of all the roles at the same time....and generating all profiles in the roles at the same time....
awaitng for ur reply....will give full reward for usefull answer

Hi ,
unfortunately there is no way in standard to bypass the manual work.
IF SU24-values have been changed for a t-code, all roles that contain that t-code, have to be adapted manually and afterwards regenerated.
The profile gets the status ' To adjust' until you have maintained the authorizations once and saved. Until then no mass generation (SUPC) will be able to regenerate thos profiles.
Please consider enough time to adapt your roles during your test upgrade. A good idea is to adapt all roles to the new authorizations in a test environement and save them afterwards in a transport. AFter you have performed the upgrade in your productive environement, you can import then this transport and you don't have to perform this time consuming 'adaption-work' again in your p-environement....
b.rgds, Bernhard

Mass Generation of Sales Orders via Marketing Projects

Hi all,
Is it possible to generete ERP order when using the functionality for mass generation of sales orders via marketing projects?
cheers Camilla

Hi Camilla,
We need to see your requirement by breaking it into two steps. Both are possible.
1) Generating Mass orders in CRM using the marketing Projects.
2) Creating ERP order.
Technically what you want is achievable. Personally i have not done it, but am confident it is possible.
You may refer to these links to get more info.
http://help.sap.com/scenarios_bus2007/helpdata/en/47/31a375878f203de10000000a114a6b/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-crm/generate-sales-orders-in-mass-based-on-marketing-campaign-crm-60-2943656
rgrds,
Randhir

Mass Generation Of Roles

Hi
Which option does user have to choose from the list to output the mass generation of roles at PFCG?
Nag.

Hi ,
unfortunately there is no way in standard to bypass the manual work.
IF SU24-values have been changed for a t-code, all roles that contain that t-code, have to be adapted manually and afterwards regenerated.
The profile gets the status ' To adjust' until you have maintained the authorizations once and saved. Until then no mass generation (SUPC) will be able to regenerate thos profiles.
Please consider enough time to adapt your roles during your test upgrade. A good idea is to adapt all roles to the new authorizations in a test environement and save them afterwards in a transport. AFter you have performed the upgrade in your productive environement, you can import then this transport and you don't have to perform this time consuming 'adaption-work' again in your p-environement....
b.rgds, Bernhard

Significance of Mass generation of profile

Hi friends
what is the significance of mass generation of profile
regards
krishna

Hi Krishna,
Mass generation of profiles is used to determine which roles already have authorization profiles. Its a post installation Basis activity to make all roles active.
In case you create new role or modify the existing one, you have to generate profiles for that role individually. You can limit the choice of roles.
You do it using transaction SUPC. Its also possible to generate the missing role authorization profiles in the background.
Regards,
Prashant
Do reward points for helpful answers

Mass generation of activities (for field force) from Trade Promotion

Hi gurus,
is it possible to mass generate activities from Trade Promotions?
I've done it several times using campaigns but i don't know if it's possible from Trade Promo. The business scenario is the following: The Sales manager define some extradisplay for a customer hierarchy node: i'd like to mass generate activities for each BP belonging to that node so that field rep. can check the execution of the promotion.
Any help is appreciated
Regards
Carminem

hi there
its very much possible
first u need to ensure that you have assigned either target group members or, if you are working with a trade promotion, a planning customer.
now follow these steps
1. You create an opportunity template or activity template in the Marketing/Activity Template Details tile set.
2.You define the criteria for determining the employees responsible for the generated activities in the Employee Responsible Details tile.
3.You start mass generation in the Marketing/Activity Templates tile set, and select a target group. For trade promotions, you have the option of selecting either a target group or a planning customer.
4.The application checks whether the opportunities or activities are already generated for each business partner and contact in the selected group.
An activity can be generated only once for a business partner or contact for each campaign or trade promotion.
5.The application identifies generates an activity for each business partner or contact assigned to the campaign or trade promotion by using the relevant template.
6.The application assigns the employees responsible for each activity according to the criteria that you specified earlier.
best regards
ashish

Mass generation of Derived Roles

Hello,
SUPC helps me in Mass generation of Master Roles. But how do I generate Derived roles in a lot?
Thanks.

Hello,
we also missed this function when we started using derivation of roles. I developed some years ago a program which does this, also possible to start it in background mode. It runs daily (in front of PFCG_TIME_DEPENDENCY) and adjust derived roles from updated parent roles (which came into the system via transport request).
Because I developed the program in my working time it's owned by my company, therefore I can not post the source. Just a few hints:
- parent roles and derived roles: you will find them in table AGR_DEFINE
- roles imported into the system: with function module TMS_TM_GET_TRLIST you can get yesterday's imported transport requests, you can read the object list with function module TMS_WBO_READ_REQUEST (those with R3TR ACGR have roles in it).
- build up an internal table of parent roles (consider the derivation level: first process the top level role, then it's derived roles, and then their derived roles and so on).
- use function module SUPRN_TRANSFER_AUTH_DATA for adjusting the derived roles of a parent role.
HTH and kind regards
Jens Hoetger

IPod First Generation Song Order Problem

Equipment Specs:
IPOD -- First Generation, 1 G size, Firmware ver # 1.1.5
ITunes -- Ver # 7.2.0.34
Problem
I recently updated to the above version of ITunes. I also recently reset/erased all my songs (no podcasts or nothing else)from my IPOD.
I then reloaded just songs to my pod using the drag and drop method from the music file. I then re-arranged the songs in my desired order.
I then disonnected the pod and exited ITunes.
When I later restarted ITunes with the pod connected, my song order had changed. With the pod still open in ITunes, I am no longer able to change the play order position. As say, move song #45 to position #2 and etc.
Has something changed as I was always able to do this prior to updating ITunes and the pod ?
Was this caused by updating ITunes to the newest version?
Is there a solution to be able to manage the order of your songs as before ?
Thx
Arc
IPOD First Gen 1Gig Firmware 1.1.5 Windows XP ITunes 7.2.0.34

OK, When I am trying to do this, I see the following
columns
1. name
2. time artist and so on
In the name column the songs are numbered.
I've been referring to the UNlabeled column to the LEFT
of the "Name" column all this time... you seem to not be able to recognize that there actually IS such column according to your description.
I'm referring to the numbers on the LEFT side as in this image:
http://a248.e.akamai.net/7/248/51/3053501176226988/www.info.apple.com/images/kba se/305350/305350_1.gif
When I try and move 9 to 5 or whatever there is no
horizontal line as I have seen in previous versions.
I know how I accomplished this task before and it is
not working in this version.
Would it work to revert back to an earlier version of
Itunes ?
Dunno... from what I've read in the iTunes discussions
this problem has not appeared there.
BUT you CAN delete iTunes 7.2 and then go to http://filehippo.com/download_itunes and download 7.1.1 (under Old Versions in box on right side of page)
Install it and see if it solves the problem...
What version are you using ?
7.1.1(5)

1st Generation iPod Touch Problems: First freezes, then no music

Hi, I was wondering if anyone else have had this problem.
My first generation iPod touch's screen stops working, but is responsive and the button and works, but since I need to slide it, I wasn't able to use it. When I plugged in my headphones, it fritzes. So I restored it to factory settings and everything is fine until I try to play music. I would click on any song, even the shuffle button, it would show that it would play, but suddenly stops and goes back to the song menu. I tried restoring a few times, but it still won't work. On top of that, when I leave it alone for a minute, it dies unexpectedly. It's been 2 and a half years since I got it. Anyone?

I have the exact same situation! My friend and I both have first generation iPod touches. My friends is 3 years old, however my iPod touch is only 1 year old because I got a new one because my last broke, still 1g. My friend was caught in the rain and got very wet once, and since then his iPod touch wifi hasn't worked. My iPod touch on the other hand has been very well looked after in a switch easy case.
My wifi used to work perfectly, until around september of last year my wifi stopped working. It searches for half a second, like it usually does when it knows there aren't anywhere networks near, and if I am really close to a router it will have 1 bar, but say unable to connect and always ask for password.
However today I had a breakthrough, even tho I haven't used my iPod in a while, I tried searching for wifi today and it worked perfectly, like brand new, I was really excited, I could even get full signal at the bus stop outside my house. 4 hours later, and it was back to square one, exactly the same symptoms as before. iPad and laptop are perfect as usual, my iPod has never been wet and I take great care of it. I don't think iOS has a big difference, as my friend is running like 1.? And I'm running 3.1.? The latest software. I've resetted many times, but no success. I'm going to call apple but please help incase they don't know.

Ipod Touch 1st Generation Power On Problem?

I own a 1st generation ipod touch which l cannot access. I was updating an app then my ipod froze which led to a full power-off. I turned the ipod back on. The apple logo will come up after holding the power on button, but my ipod touch was turning off after a few seconds once the apple logo is on the screen. I have tried holding the home button and power button for an ipod reboot sadly this still had no positive effect with the ipod touch problem. I also attempt to reset my ipod, but because it remains on for about 15 seconds and shut back down my computer will not completely finish recognizing my ipod. IS THERE A WAY TO FIX THIS PROBLEM & MY IPOD?

Mikalatte--
I'd at least take it in to be looked at--exams are free, if I am not mistaken.
I don't think it's a software issue...though you could try a reset and a synch.
Doc
Message was edited by: Doc

My Ipod 2nd generation has a problem. I'm not able to charge it and the screen has a discolored look...everything is pink.

There is a problem with my IPod Nano (2nd generation). It doesn't work at all. The screen is discolored...everything is pink/red.

Groovy.
Try restoring it, if you can.

Quarterly TDS Return generation-Text file problem

Hi
I am working in 4.7 and doing with the TDS Quartrly return. In the text file generation, nothing is coming except some '^' s and 0s. I applied note 873149. Still the problem is not over.
Any help would be highly appreciated.
Regards

Hi
I have maintained the section codes and recipient types as well. At the time of quarterly return generation, the excel file is OK. Whereas the text file is having only 0s and ^s. I applied a note for this already. Still it is not resolved.

Third Generation iMacG5 logicboard problem

Hi all,
My iMac G5 (third generation) just died. Had just updated iTunes and QuickTime, was asked for a restart, and thereafter the screen stayed black and the fan revved high non-stop until I turned it off. Tried zapping the PRAM etc. to no avail (couldn't even hear the chimes because I had the volume turned off before it died). Called Apple support, went through the whole rigamarole over the phone, but the problem remained. Thankfully had AppleCare, and took it into the local Apple Store. Ten days later I'm informed I need a new logic board, and that Apple considers it a "known problem." Apple has none in stock right now, so it won't be shipped for another two weeks. My question is: wasn't this logic board problem specific to first generation iMacs? I thought Apple had corrected the problem? Checked the serial number, but mine isn't covered by their extended service program for that problem. Now I'm worried that I'll end up replacing the board time after time like many of the posts I've read. And I'm concerned about the power supply, in case that's bad as well as (or insted of) the logic board. Any thoughts? My extended warranty expires next November...
iMac G5 (iSight) Mac OS X (10.4.11)

All computer components are subject to failure, I wouldn't worry unduly about another motherboard failure after your warranty runs out. Just make sure that when you get your computer back, it is functioning completely normally. If you have even the slightest problem, send it sight back until they correct everything.

Mass Generation of Crystal Reports

Hello Experts,
         We have a requirement in our company for creating Complex Growth Reports for Rebate Solution. Currently I am creating those out of BeX Analyzer using workbooks and writing Macros in it.
        I would say it is complex because each workbook has 5-10 Queries on average and it has graphs/chart and other things. Also, user wants to generate each of these Reports for different Customers in PDF and Excel format and save it in one folder on there machine which they can review and later on send it to End Customers.
      Current solution out of BeX is very complex and Business Users are not happy with it so we are looking for some tool on top of BW that can do these complex generation of Reports in mass and save it PDF format in some desktop folder.
Any guidance is appreciated
Regards,
DNP

In order to implement report bursting based on CR and BW data sources you need to have
1) either a BO Enterprise or a BO Edge installation (The CR Server does not support access to SAP BW data).
2) installed the BO integration Kit for SAP solutions on your BO Server and on your clients (workstations where the CR Designer is installed)
3) configured the BW publisher (part of the int.Kit) on the server
4) creatd the reports using the SAP toolbar in the CR Designer and stored them in your BW system (done in the CR Designer through the int.Kit functionality)
5) configured server side SNC between BW and BO server (when personalization is required)
Regards,
Stratos

Problem with fifth generations Ipod, usb problem...

The loader helps with an Ipod of fifth generation, alone me recononce cuandoes firewire and the port usb not, already I have virificado with 4 different cables and in several computers but it me it does not recognize in other computer.
I dondt speak much english but I need your help please.
Message was edited by: c457ro

3. OS (always burn win -> win, Linux -> Linux,
etc)
I never worry about that. I've burned in Linux and
Windows and taken it across many operating systems
with no problem. One thing to make sure is to
finalize the disc. Some operating systems don't like
the way other apps/operating systems handle
multisession CDs.I mentioned that exclusively in regards of RHEL/OEL's mediacheck test. Nothing else. It doesn't mean that CD itself is invalid and that installation will be impossible. Whenever you burn RHEL ISO images in windows using Nero 6/7, specially at 12x speed, you can expect 2-3 CDs (out of 5) to be "suspicious" and they don't pass mediacheck test. Whenever you burn in Linux using cdrecord at 12x speed, you can expect 1 CD (out of 100) to be "suspicious". That's my experience.
N.J.

SQ01 mass generation of quries problem

Similar Messages

Maybe you are looking for