SQL Server ('12) Job - T/SQL Type

Hi,
I need to create a job which runs some T/SQL queries on the database that's located on a different server (DB not linked or anything). Is this possible to do? If so, how can I go about doing this?
i.e. I want to create a job of type T/SQL on Prod1 server that runs a query on a database "DB2" on Prod2 server.
As of now, I am only seeing the databases available on Prod1 server from the Database drop down list.
Thank you

If the query errors out, I want the job to fail. is there a way to raiseerror with this type of job?
Using Raiseerror('error",16,1) at the end of my query. In SSMS, the query fails and I get "Error" but when I run this job with same query, the step doesn't fail (I have on succ/fail set up as expected).
You can set alert on the job when it fails so that you would be notified when job fails and then you can see job history why it failed. Does this help
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
I am not sure what you mean. Suppose I write an invalid query
DECLARE @test smallint
SET @test = CASE when 1+1 = 2 THEN 0 else 1 end
IF (@test = 0)
Raiseerror ('Uhh",16,1)
That's my query. The above IF statement will result in 0 which will raise an error.
The error is raised when I run this in SSMS. However, when I use this as a query within SQLCMD, the job completes successfully. I want the job to fail. I have Go to the next step on success and quit the job on failure. I am expecting a failure to happen
due to raiseerror. How do I achieve this? Right now it is not failing.

Similar Messages

Will dynamic Excel commands in a C# Edit Script run ok as a SSISDB Package and a SQL Server Agent Job?

I've seen some conflicting things in terms of dynamic Excel commands running in a SSISDB Package and a scheduled SQL Server Agent Job...things like that it's not supported...that it won't work...etc...
It's a pretty simple script...to open up a .xlsx file and save it as a .xls file. I am trying to be proactive here and the reason I did it this way is because I could not source the .xlsx file and then I couldn't use OLE DB sourcing because I think the .xlsx
file wants you to use Microsoft.ACE.OLEDB.12.0 and that entails installing the 64-bit Microsoft Access Database Engine and I cannot do that because our network version of Microsoft Office 2010 is 32-bit and in order to install the 64-bit Microsoft Access Database
Engine 2010 it's prompting me to uninstall Microsoft Office 2010 and that is not possible.
Ugh!
So I'm hoping that I can promote and deploy this current SSIS Package to Production and create a SQL Server Agent Job that will successfully run this and its dynamic Excel commands.
Do you know of any hurdles with this? Any anomalies...struggles...
Thanks for your review and am hopeful for a reply.
Here's the C# Script...which works perfectly client side...
string StrFileName = (Dts.Variables["User::FileName"].Value.ToString());
StrFileName = Path.GetFileNameWithoutExtension(StrFileName);
string StringSourceFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xlsx";
string StringDestinationFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xls";
// This initiates the Excel Application
Microsoft.Office.Interop.Excel.Application excelApplication = new Microsoft.Office.Interop.Excel.Application();
// This Opens the Source .xlsx File from Emdeon ePaySmart
Workbook workbook = excelApplication.Workbooks.Open(StringSourceFile, XlUpdateLinks.xlUpdateLinksNever, true, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Save the Source .xlsx Emdeon ePaySmart File as a .xls File...note xlFileFormat.xlExcel5
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Close the Source
workbook.Close(false, Type.Missing, Type.Missing);
// This shuts down the Excel Application
excelApplication.Quit();

This should work if you use a proxy to run this package in the Agent; see:
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

SQL Server Agent - Job History not being recorded (SQL Server 2005)

I have been trying to get to the bottom of an issue with SQL Server Agent not recording any job history. I am using SQL Server 2005 on a single Windows Server 2008 machine (i.e. no other domain controllers/active directory servers).
The SQL Server Agent service is configured to 'Log On As' NT user account 'sqlagent'. The jobs themselves are executed successfully (all 'Transact-SQL' type steps actually use the 'sa' account) however the there is no actual job history to be found for any
of the jobs -- in the SQL Activity monitor, the 'Last Run Outcome' is always 'Unknown' and the 'Last Run' date is always 'Never' for all jobs; in the SQL Job History Viewer there are no entries for any instances of a job being executed.
The 'sqlagent' NT user account ia a member of the 'Administrators' NT group; the 'Administrators' group appears under Security > Logins on the database server. I have another server that also uses the same setup with a 'sqlagent' NT user account, on that
database server the 'sqlagent' user account appears under Security > Logins and the SQL job history works correctly. I have attempted to add the 'sqlagent' to the Logins on the affected server using the SQL Server Surface Area configuration but this operation
returns an error, detailed below.
Additionally, I have attempted to use the built-in NT system account 'NETWORKSEVICES' to run the SQL Agent Service but this also results in exceptions in the error log and no job history being recorded. The entries in the error logs are very similar to those
from the 'sqlagent' NT user account but instead the user is referred to as 'NT AUTHORITY\ANONYMOUS LOGON' in the error logs, again these are detailed below.
Many thanks in advance for anyone's time and help with this issue!
Arthur
The following errors are raised in SQL Server Agent > Error Logs each time a job is executed:
Date 11/11/2012 18:30:01
Log SQL Agent (Current - 11/11/2012 18:30:00)
Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
Date 11/11/2012 18:30:01
Log SQL Agent (Current - 11/11/2012 18:30:00)
Message
[382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
If the SQLAgent service is configured to use the NT system account 'NETWORKSERVICE' then the following errors are returned instead:
Date 29/10/2012 18:30:15
Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
Message
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [SQLSTATE 28000]
Date 29/10/2012 18:30:15
Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
Message
[382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
I have tried granting the 'sqlagent' NT user account with SysAdmin Server Role privaledges using the SQL Server User Provisioning tool in SQL Server Surface Area Configuration, but this always throws the following, similar error:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Error: 18452)
===================================
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18452&LinkId=20476
Server Name: 127.0.0.1,1344
Error Number: 18452
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at sqlprov.SysAdminServerRole.ProvisionInstance(Instance instance, String userName)
at sqlprov.ProvisionTask.Provision(Instance instance, String userName)
at sqlprov.MainForm.ProvisionTasks()

Hi Rama,
Thanks for your reply. I have run the query you specified and can see only one entry with "NTLM" in the auth_scheme column, all of the rest have "SQL". It figures that the entry with "NTLM" is relating to the one NT user account that can successfully log
in to the service (as mentioned in my reply to Nag above, this is the NT user account that installed the service on the machine). I have also executed the same query on the other machine that I mentioned in my original post and this contains two "NTLM" entries,
I'd assume that these relate to the NT user that installed the software and the correctly working "sqlagent" NT user account that is correctly logging the job history on that machine.
I think the problem is very much to do with granting access to new NT user accounts, as per the KB article that you have quoted above. In this case, it is not relating to scenarios 1 or 2 as these relate to SQL Server logins and this issue is about a Windows
Authentication login. As I mentioned to Nag above, I am unable to grant any NT user accounts with access to the service however the NT accounts are all defined locally on the same machine as the SQL server is installed (i.e. there is no domain controller,
active directory controller, etc) so I don't understand how the Windows login cannot be verified.
Any further advice on the issue would be greatly appreciated, please let me know if there is any more information I can provide to help diagnose the problem.
Many thanks!
Arthur

What is the best way to read, process, and write an Excel File Server side...SQL Server Agent Job

So I was using dynamic Excel commands to open and save as using...
Microsoft.Office.Interop.Excel.Application
and
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
which worked all fine and dandy client side. Then when I attempted to create a SQL Server Agent Job, this failed as a result of SQL Server side not being able to execute dynamic Excel commands.
So do I need to therefore try and do this function via Microsoft.ACE.OLEDB.12.0 commands? And where can I find the commands and syntax to open and save as? I have to Open a .xlsx file, save it as a .xls file, and then open this newly created .xls file and
then save it as a .csv file.
Thanks for your review and am hopeful for a reply.
ITBobbyP85

I think you might be over complicating things.
You can use SSIS with Excel Source/Destination connections to read in, or output to an excel sheet/file.

VBScript Runs Correctly From Command Prompt, But Not From SQL Server Agent Job

I'm trying to run this script on my local machine to do some post-batch cleanup and it doesn't run correctly from the scheduled job (or when I invoke the job).
Here's the script in question:
Option Explicit
Const filePath = "C:\Documents and Settings\jmunn\My Documents\Visual Studio 2008\Logs\"
Const holdDays = 6
main
Sub Main()
ClearArchive
End Sub
Sub ClearArchive()
Dim fso 'As Scripting.FileSystemObject
Dim fld 'As Scripting.Folder
Dim f 'As Scripting.File
Dim delLogName, delLogOut, delCtr
Set fso = CreateObject("Scripting.FileSystemObject")
Set fld = fso.GetFolder(filePath)
delLogName = filePath & "Nightly Backup - Backup Logs Deleted" & ".txt"
Set delLogOut = fso.CreateTextFile(delLogName, True)
delLogOut.WriteLine(delLogName)
delLogOut.WriteLine("")
delLogOut.WriteLine("-- The following log files were deleted on " & DateValue(Now()) & " at " & TimeValue(Now()))
delLogOut.WriteLine("")
delCtr = 0
For Each f In fld.Files
If Left(f.Name, 48) = "Nightly Backup - SQL Server Databases_Subplan_1_" And Right(LCase(f.Name), 4) = ".txt" Then
If DateDiff("d", f.DateCreated, Date()) > holdDays Then
delLogOut.WriteLine(f.Name)
fso.DeleteFile f, True
delCtr = delCtr + 1
End If
End If
Next
If delCtr = 0 Then
delLogOut.WriteLine("No log files were deleted this run...")
End If
Set fld = Nothing
Set fso = Nothing
delLogOut.Close
End Sub
If I put the script in its own file and run it from the command prompt, it runs just fine. If the script runs from the SQL Server Agent job, the for-loop will delete the files correctly, but the filenames
do not get written to the deletion log file and the counter does not get incremented, so according to the job log, nothing was deleted. Why does the script run differently from each invocation? It can't be a permission thing, the service that logs in has full
access to the directory and the files do get deleted. Any ideas out there?
Between this and other outstanding issues, I'm quickly losing faith in SQL Server. >=o(
Thanks in advance for your thoughts!
John
Version Info:
Microsoft SQL Server Management Studio      10.0.2531.0
Microsoft Analysis Services Client Tools      10.0.1600.22
Microsoft Data Access Components (MDAC)      3.85.1132
Microsoft MSXML      2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer      8.0.6001.18702
Microsoft .NET Framework      2.0.50727.3603
Operating System      5.1.2600
"A bus station is where a bus stops. A train station is where a train stops. On my desk I have a workstation..."

Hi
jrmunn
i am trying to execute VB script to refresh my excel files.. using Vbscript file through SQL Agent job step.
i have copied VBscript in a file with the extension RefreshExcel.vbs kept in C:\RefreshExcel.vbs
Below is the script used inside the file (RefreshExcel.vbs)
//---Script code-----------------------------------------------------------------
Dim objXL, objWB
Dim FileLocation, FileName
On Error Resume Next
'lgnConn = 1
FileLocation = "F:\Reports\Reports"
Set objXL = CreateObject("Excel.Application")
objXL.DisplayAlerts = False
FileName = "ReportFile1.xlsx"
'MsgBox (FileLocation & "/" & FileName)
Set objWB = objXL.Workbooks.Open(FileLocation & "/" & FileName)
objWB.EnableConnections
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.Save
objWB.Close
Set objWS = Nothing
Set objWB = Nothing
objXL.Quit
Set objXL = Nothing
'MsgBox ("Refresh Completed")
---------------------------------------------------------------------------------------------------//Script complete
Now when i am trying to call this script file in SQL agent job step (as you mentioned )
as Type -cmdExec(OperatingSystem)
cscript "C:\RefreshExcel.vbs"
Issue: job step executed succesfully ,,but without performing any refresh on the excel. So i am not understandig what is going wrong. the same script file work when i am calling it through a batch file (window scheuler task). But it doesnt support
to run the file "when user is not logged in"
that is why i want to refresh my excel file through sql agent ,which can be scheduled to any time and cab be run as SQL agent credentials.
Can you please help me on this ...i have tried all the option but nothing working .. found hope by seeing your solution.
Thanks in advance.
Please help me. :-(

Management Studio Fails when added Integration Services step to SQL Server Agent Job

Hi,
I have two new servers I've setup with Windows Server 2012, SQL Server 2012 SP1, Visual Studio 2012 SP4. I've previously been on SQL 2008 and VS 2008 so this is new to me.
I am finding SSMS is throwing an exception on both machines when i do the following:
1. Go to SQL Server Agent | Jobs
2. Create a new Job.
3. Select Steps and click New Step
4. Change the job type to SQL Server Integration Services Package.
Following error occurs:
TITLE: Microsoft SQL Server Management Studio
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
ADDITIONAL INFORMATION:
The C++ module failed to load.
(DTEParseMgd)
Index was outside the bounds of the array. (DTEParseMgd)
I also find if I take an existing job with SSIS package steps and attempt to edit those steps the same message appears. This issue happens on both my servers as they have been configured almost identically. This doesn't occur when selecting any other job
type.
I've also tried installing cumulative update 8 in a hope that this may fix it but with no success.
As my entire environment is based around SQL Agents running SSIS i'm a little bit concerned, especially since I have some tight deadlines getting these servers running.
I have found nothing relating to this issue. Any help greatly appreciated.
Simon
Below is the detailed error message:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
   at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
   at System.Windows.Forms.ComboBox.set_SelectedItem(Object value)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeStepCombo()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeData()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.OnInitialization()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SelectCurrentNode()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.InitializeUI(ViewSwitcherTreeView treeView, ISqlControlCollection viewsHolder, Panel rightPane)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm.InitializeForm(XmlDocument doc, IServiceProvider provider, ISqlControlCollection control)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm..ctor(ISqlControlCollection control, IServiceProvider provider)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.editJobStep_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
   at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
   at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
   at _getFiberPtrId()

Hi,
I hadn't installed CU3 however as a test i tried installing CU4 and this didn't help. Since my first emails i have more issues that have brought a complete hault to the upgrade project.
If i double click on a package to run it manually I basically get the same issue. This means i have no way of running any packages except throught VS.
I've also found that regardless of the order of the software installs it still fails. It's related to SP1 of SQL and SP4 of VS.
I'm on Server 2012. When install in the following order SQL 2012, SQL SP1, VS2012, BIDS, VS SP4 i have no problem until VS SP4 is installed. If i install VS SP4 then BIDS it also fails at the last step. If i install all the VS and BIDS software first, then
SQL then SQL SP1 it fails at the SQL SP1 step.
This means i could actually install everything and either ignore the SQL SP1 or the VS SP4 and i'd be fine however this is not really a solution as i will never be able to patch the software and once live this is very dangerous.
I am still surprised there is no obvious solution to this. I'm only installing MS software on a fresh box and only installing 5 pieces of software (including the SPs). I would have though if this was an issue others would have come across it too.
Has anyone else installed all these components and got them working on the same OS. I believe early on in my testing i installed these in Windows Server 2008 and didn't have the issue.
Regards.
Simon.

How to stop SQL Server Agent Job if Stored Procedure returns value 0

I have SQL Server 2012 SSIS.
I have 2 SSIS packages.
I have created SQL Server Agent Job for running packages.
I have created steps. If first step have run succesfully next step is run.
I have need to add new logic.
I have validation stored procedure, which validate DB table values and returns 1 or 0.
I would like to create logic where first of all this SP is runned. Return value of SP determines if steps are run or not.
I was thinking to use Execute SQL Task for running SP.
If value 1 is returned, then run rest of Tasks is run.
If value 0 is returned, what should I do so that Job is stopped? I need assistance!
I want current step to stop never moved to next step.
Is there any SSIS tasks, which can stop the Job?
Or should I make Step for running validation SP?
How to do so that if value 0 is returned stop Job.
Kenny_I

Please refer the below link:
http://technet.microsoft.com/en-us/library/aa260308(v=sql.80).aspx
Please read Remarks carefully!!!
Remarks
If a job is currently executing a step of type CmdExec, the process being run (for example, MyProgram.exe) is forced to end prematurely. Premature ending can result in unpredictable behavior such as files in use by the process being held open. Consequently,
sp_stop_job should be used only in extreme circumstances if the job contains steps of type CmdExec.
Permissions
Execute permissions default to the public role in the
msdb database. A user who can execute this procedure and is a member of the
sysadmin fixed role can stop any job. A user who is not a member of the
sysadmin role can use sp_stop_job to stop only the jobs he/she owns.
When sp_stop_job is invoked by a user who is a member of the
sysadmin fixed server role, sp_stop_job will be executed under the security context in which the SQL Server service is running. When the user is not a member of the
sysadmin group, sp_stop_job will impersonate the SQL Server Agent proxy account, which is specified using
xp_sqlagent_proxy_account. If the proxy account is not available,
sp_stop_job will fail. This is only true for Microsoft® Windows® NT 4.0 and Windows 2000. On Windows 9.x, there is no impersonation and
sp_stop_job is always executed under the security context of the Windows 9.x user who started SQL Server.

One sql server agent job suspend

One sql server agent job--run full backup of one database is suspended from activity monitor.
How to find why it is suspended and troubleshoot?

"Suspended" is a common status for a thread. It indicates the thread is waiting on an external resource, which backups often are
Check few things:
1. Database size, how much backup is completed from below command and location where backup files are being placed
select session_id,command, percent_complete
from sys.dm_exec_requests
If that on network than might be due to slow netword backup take some time.
2. Check job history, expected
completion time of backup job and also if any change in the I/O and CPU time for the SPID
3.Check wait type of suspended spid, SQL server and event viewer logs. If any I/O issue on the server. Like disk responding slowly that might be a cause of delay.
Please click the Mark as answer button and vote as helpful if this reply solves your problem

How to run Exe file through Sql server agent job

Hello All
i have 2 servers
1.Application Server
2.Database server
Application server has a .exe file so i wanted to run this exe file through SQL server agent job from database server.
What is the process for run this Exe file
Can you plz suggest me step by step process
Kamal

While i'm trying to implement this below method
Step1 : Right Click SQL Server Agent. Select New -> Job. This will open a wizard to schedule a new
job.
Step2 : Select Steps from options given on the left side of wizard. This is the main place to set your
exe\program as a running step. Give some name to this step, Select Operating System (cmdexec) for the Type and give the full path of exe in Text box for Command.
ex:\\10.11.00.98(your application serverIP)\ch.exe
Thanks vanchan-Please
mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I got this below error
Message
Executed as user:NJROSJ345\SYSTEM. The process could not be created for step1 of job
(Reason:Access is Denied)The step failed.
But i have sys admin rights on the both the servers
Kamal

Can't launch executable from SQL Server Agent Job

I'm trying to launch an .exe from SQL Server Agent Job and basically nothing happens. I created a job, with 1 step, type is Operating System (CmdExec), run as sql agent service account, and in the command box I typed "start notepad" (no quotes). The job owner is set to administrator. I manually start the job, it processes successfully yet notepad does not launch. I've tried with other .exe's and result is the same. Any advice? Thanks!

I tried several things and not just with notepad, I tried a couple other small executables. I've tried:
c:\notepad --(I copied it to c:\ thinking it maybe it's not finding the file.)
c:\notepad.exe
notepad.exe
start notepad
start notepad.exe
and also launching it from a batch file.
If I use just notepad the job hangs saying it's executing and I have to stop it. If I use start notepad it comes back as executed but actually nothing happens, ie, notepad does not launch. I've tried different security settings within SQL Server (ie assigning all available default roles to the login at the same time and individually one at a time) with identical results. SQL Server is loging in with local administrator priviledges and so is SQL Server Agent. My settings are the default installation settings (for Windows Server 2003 and SQL Server 2005) except that I read the BOL page "Configuring SQL Server Agent" which indicates the permissions needed for the following:
Adjust memory quotas for a process
Act as part of the operating system
Bypass traverse checking
Log on as a batch job
Log on as a service
Replace a process level token
And they have been set. Still the same. BTW, I get the same result when trying to launch the file using xp_cmdshell with all the variations, and the proxy account for xp_cmdshell has been set to a login with administrator priviledges....
I think it's some security setting in Windows Server, if only because I think I've tried all the settings within SQL Server...
BTW, also, nothing is setup for Proxies under the SQL Server Agent node, but I don't think I should need to if I'm using the administrator level login...

While i am trying to start the sql server agent job getting the error

Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.

Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.
I searched net for this type of error and found that Latest SP can fix this issue.See below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/12181324-bc51-41a5-a8a5-608bfe2725e9/could-not-load-type-smoagentjobbasecollection?forum=sqlsmoanddmo
Can you also refer to this link
http://www.sqldbadiaries.com/2010/12/20/could-not-load-file-or-assembly-error-while-using-tdp-makes-a-come-back/
Also please see this connect also
http://connect.microsoft.com/SQLServer/feedback/details/280907/sql-agent-job-actions-fail-from-job-activity-monitor
hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SQL Server Agent Jobs error for Slowly changing dimension

Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram

Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram

SSIS Package Fails when Scheduled as a SQL Server Agent Job

I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
Gary

Hi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen

SQL Server ('12) Job - T/SQL Type

Similar Messages

Maybe you are looking for