SQL types over PLSQL types while using Oracle Applications adapter in BPEL

Use SQL types over PL/SQL types while using Oracle Applications adapter
in BPEL/ ESB
This document will be focusing on Oracle Applications adapter. However Database adapter is much like OA adapter (even OA adapter uses DB Adapter), so the readers who are interested to explore DB adapters, can relate things with this document and go further as well.
Some Guidelines for writing PL/SQL APIs for OA Adapter
As we know when we create a partner link from the OA adapter wizard it sometimes writes some wrapper script supportive to the OA Adapter WSDL which contains below
* Object type for PL/SQL RECORD
* Nested table of the given type for PL/SQL TABLE. For example, the nested table of NUMBER.
* INTEGER substituted for PL/SQL BOOLEAN
* Wrapper Script for converting above three set of data types . (PLSQL to SQL and SQL to PLSQL conversion functions)
In runtime this wrapper script for converting PL/SQL to SQL and SQL to PL/SQL is an extra overhead.
So the first advice would be to avoid the use of the below as parameters of PLSQL API being called by OA Adapter.
* PL/SQL RECORD
* PL/SQL TABLE. For example, the nested table of NUMBER.
* PL/SQL BOOLEAN
In other way we can say we should try to use only SQL data types in arguments if we are planning to call any PL/SQL API from the OA Adapter.
If the requirement is to use a table or record uses the Object type. In place of BOOLEAN better to use VARCHAR or INTEGER what ever fulfills your requirement. Following this guideline we can reduce a huge number of Line of codes to be run each time the adapter being called.
Generally, Oracle E-Biz standard APIs use PL/SQL record types and table types so when there is a requirement to call these API’s from OA Adapter (this is a common requirement in development), and if we directly browse the API in OA Adapter Configuration Wizard and create the partner link, again a huge number of code is written by the wizard in the wrapper script (a number of extra mapping of fields which are not being used in the interface).
In this case better would be to create an Object type with only the required fields which are being used in that call and use them as parameters for the PLSQL API.

Find the complete document
http://www.4shared.com/file/167171882/29525116/Use_SQL_types_over_PLSQL_types.html

Similar Messages

Unable to create Target for siebel 8.1.1 using Oracle Application Adapter

Hi,
I am unable to connect to siebel application using Oracle Application Adpater for weblogic server.Details are as follows
OS - Linux x86
Weblogic - 10.3.3
SOA - 11.1.1.3
Siebel - 8.1.1
When tried to create target following error is thrown
"Error getting targer[Siebel] - Invalid or incomplete string .(SBL- JCA - 00301)"
Can any body help me to resolve this issue.
Regards
Srinivas Pusa

Hi,
There is definitely a table called HSP_LOCK in the planning applications repository, are you sure you are looking in the correct place.
Anyway there is also a utility (HspUnlockApp) in the \planning\bin directory that should unlock the app and will save you having to mess around with any tables, more details :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch04s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Error invoking Oracle Application Adapter part of SOA Suite 11g

We are using Oracle application adapter from BPEL process manager ( SOA Suite 11g) to call PLSQL:OE_ORDER_PUB:PROCESS_ORDER (EBS R12).
The call returns error : "<ns0:X_MSG_DATA
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">FND
FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_PVT N PROCEDURE_NAME Lines N
ERROR_TEXT ORA-06502: PL/SQL: numeric or value error: NULL index table key
value </ns0:X_MSG_DATA>"
The same order gets created from PLSQL but fails while trying from BPEL through Oracle APPS adapter. The dbg file at the EBS end is given below:
Session Id:5695950
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID22020
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
In OE_Contracts_util.check_license
performing check first time, lx_status: I
l_sales_contracts_enabled: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Querying the table for the AR details ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
Raj3
Raj4
before getting payment count
Exiting OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
ENTER OE_HEADER_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DBE
Parameter value fetched from table.
PARAMETER VALUE: E
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SECURITY.ENTITY
Entering OR_HEADER_UTIL.Pre_Write_Process
No prepayments for the order
Entering OE_HEADER_UTIL.Get_Order_Number
Entering OE_HEADER_UTIL.Get_Order_Number
Ordertype is :1087
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
before calling get_seq_info
Category Code1087
Set of Books2021
after calling get_seq_info
fndseqresult0
fndseqtype1017
p_old_header_rec.order_number:
p_old_header_rec.transaction_phase_code:
Exiting OR_HEADER_UTIL.Get_Order_Number
Exiting OR_HEADER_UTIL.Pre_Write_Process
WRITE TO DB
Entering OE_HEADER_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
P_HEADER_ID=22020
P_HEADER_REC.HEADER_ID=22020
OD GLOBAL HEADER_ID= 22020
NEW GLOBAL HEADER_ID= 22020
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
returned index is: 1
Exiting OE_HEADER_UTIL.INSERT_ROW
Entering OE_HEADER_UTIL.Post_Write_Process
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering Procedure Process_Request_Pvt
Request type DFLT_HSCREDIT_FOR_SREP
Entering OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTERING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER_SCREDITS
ENTER OE_HEADER_SCREDIT_SECURITY.ATTRIBUTES
Entering OE_VALIDATE_Header_Scredits.Attributes
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_Header_Scredits.Attributes
Entering OE_VALIDATE_Header_Scredits.Entity
Entering OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Duplicate_salescredit
Exiting OE_VALIDATE_Header_Scredits.Entity
ENTER OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for AUDIT_TRAIL_ENABLE_FLAG
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: E
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
ENTER OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , COLUMN:
EXIT OE_PC_CONSTRAINTS_ADMIN_PVT.IS_OP_CONSTRAINED , RESULT:0
EXIT OE_HEADER_SCREDIT_SECURITY.ENTITY
ENTERING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
ENTERING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
UI FLAG IS FALSE
CODE_RELEASE_LEVEL=120004
P_HDR_SCR_ID=64168
ENTERING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
EXITING OE_ORDER_UTIL.RETURN_GLB_ENT_INDEX
INDEX=641680001
L_RETURN_STATUS =S
L_RESULT =F
OLD SCR_ID 64168
NEW SCR_ID64168
EXITING OE_ORDER_UTIL.UPDATE_GLOBAL_PICTURE
RETURNED INDEX IS: 641680001
EXITING OE_HEADER_SCREDIT_UTIL.INSERT_ROW
EXITING OE_ORDER_PVT.HEADER_SCREDITS
ENTER SET RECURSION MODE
ENTITY CODE-4
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
EXITING OE_HEADER_SCREDIT_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
Exiting OE_DELAYED_REQUESTS_UTIL.DFLT_HSCREDIT_PRIMARY_SREP
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-11
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
leaving process_requenst_for_reqtype
Before calling eval_post_write_header in HEADER Post Write
ENTERING EVAL_POST_WRITE_HEADER
M_HOLD_ENTITY_CODE/M_HOLD_ENTITY_ID:C/13489
RETRIEVING NEW HOLD SOURCE RECORD
HOLD SOURCE RECORD NOT FOUND , EXITING
EXITING EVAL_POST_WRITE_HEADER
After calling eval_post_write_header in HEADER Post Write
Before calling OE_SCHEDULE_UTIL
ENTERING INSERT_INTO_MTL_SALES_ORDERS
CALLING INVS CREATE_SALESORDER
ORDER TYPE: Cochin Order
SOURCE CODE: ORDER ENTRY
ORDER NUMBER : 1017
L_MSG_COUNT
RETURN STATUS S
EXITING INSERT_INTO_MTL_SALES_ORDERS
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_HEADER_UTIL.Post_Write_Process
EXITING OE_ORDER_PVT.HEADER
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER PROCESSING HEADER_ID = 22020
AFTER HEADER_ADJS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
AFTER HEADER_PRICE_ATTS PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
Entering Procedure Process_Request_Pvt
Request type CHECK_HSC_QUOTA_TOTAL
Entering OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
Entering OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_VALIDATE_Header_Scredits.Validate_HSC_QUOTA_TOTAL
Exiting OE_DELAYED_REQUESTS_UTIL.VALIDATE_HSC_QUOTA_TOTAL
leaving Process_Request_Pvt
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Enter OE_Delayed_Requests_Pvt.Process_Request_for_Entity
ENTER SET RECURSION MODE
ENTITY CODE-9
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
BEFORE LINES PROCESSING
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
Entering OE_ORDER_PVT.LINES 1: 15-OCT-09 18:31:47
---------LOOPING FOR NTH TIME N= 1
OPERATION = CREATE SO SETTING OLD TO NULL
Entering OE_LINE_UTIL.CONVERT_MISS_TO_NULL
outside margin convert miss to null
inside margin convert miss to null
Exiting OE_LINE_UTIL.CONVERT_MISS_TO_NULL
AT LINE LEVEL HEADER_ID22020
Entering OE_HEADER_UTIL.LOCK_ROW
Entering OE_HEADER_UTIL.QUERY_ROW
Before caching OE_HEADER_UTIL.QUERY_ROW
Exiting OE_HEADER_UTIL.QUERY_ROW
selected for update, now compare
STANDARD LINE
L_MODE IS MODELS_AND_STANDARD
0
STARTING LINE LOOP. HEADER_ID = 22020
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
VALUE FROM DB83
Parameter value fetched from table.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 9.990000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E+125
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
querying item from mtl_system_items
querying based on ship_from_org
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
CHECK ATTRIBUTES SECURITY
Enter OE_LINE_Security.Attributes
ATTRIBUTE VALIDATION
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Enter procedure OE_validate_line.Attributes
Header has got created in the same call
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
before selecting line_type info : G_MISS_CHAR
after selecting line_type info : G_MISS_CHAR
tax_flag :
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
Checking for Ship Dates....
Checking for Arival Dates....
item_relationship_type :
preferred_grade:
Exiting procedure OE_validate_line.Attributes
AFTER ATTRIBUTE VALIDATION
DEFAULT MISSING
ENTER OE_DEFAULT_LINE.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
IN DEFAULTING: FUNCTION GET_ITEM_TYPE
THE INV ITEM IS5429
line_category_code = ORDER
retrobill_request_id =
item_type_code =
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
CALLING GET_SMC
DEFAULTING SMC FLAG
GET SMC: TOP MODEL LINE ID :
CALLING GET_ATO
IN GET_ATO_LINE , ITEM_TYPE_CODE :STANDARD
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
GET_ATO_LINE: NY
RETURN ATO_LINE_ID AS NULL
ENTERING MODEL_OPTION_DEFAULTING
LINE_ID TO DEFAULT:
IB Owner:
IB Install:
IB Current:
Entering OE_CONFIG_TSO_PVT.Is_Part_of_Container_Model..: 15-OCT-09 18:31:47
Line Id :
Top Model Line id:
ATO Line id:
operation :
inv item : 5429
Inventory Item id:5429
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
BOM Item Type:4
Replenish to Order:N
Config Model Type:
Top Container Model?:N
Part of Container Model?:N
Exiting OE_CONFIG_TSO_PVT.Is_Part_Of_Container_Model..: 15-OCT-09 18:31:47
RETURNING FOR ITEM TYPE MODEL AND STANDARD
TOLERANCE BELOW :
TOLERANCE BELOW :
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
Before Defaulting P_Qty and P_Qty_Uom Values:
Pricing Qty: 20
Pricing UOM:
Ordered Qty: 20
Ordered UOM: EA
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
SHIP FROM OR SHIP METHOD IS NULL/MISSING
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
CALLING GET SHIPPABLE_FLAG
1 , ATO_LINE_ID:
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
SHIPPABLE FLAG: Y
SETTING RE_SOURCE_FLAG TO N
EXIT OE_DEFAULT_LINE.ATTRIBUTES
APPLY ATTRIBUTE CHANGES
Entering OE_LINE_UTIL.APPLY_ATTRIBUTE_CHANGES
Entering OE_ORDER_CACHE.LOAD_ORDER_HEADER
Exiting OE_ORDER_CACHE.LOAD_ORDER_HEADER
Entering OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.LOAD_LINE_TYPE
p_key is not null
Exiting OE_ORDER_CACHE.LOAD_LINE_TYPE
ENTER RETURN_LINE
EXIT , THIS IS A REGULAR LINE
Entering OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.LOAD_CUST_TRX_TYPE
Exiting OE_ORDER_CACHE.GET_TAX_CALCULATION_FLAG
Entering OE_ORDER_CACHE.Enforce_List_price
Exiting OE_ORDER_CACHE.Enforce_List_price
old calculate price flag G_MISS_CHAR
new calculate price flagY
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
OE_GLOBALS.G_PRICING_RECURSION:N
Entering OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
New Item, dont have to do anything
Exiting OE_LINE_UTIL.UPDATE_ADJUSTMENT_FLAGS
Freeze method is :BOOKING
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Ordered Qty has changed
New Ordered Qty : 20
Old Ordered Qty :
Freeze method is :BOOKING
B2315926_2:
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
Entering OE_ORDER_CACHE.Load_Item
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
p_key1 is5429
prev item: 5429
l_key2 (Master organizion_id) is83
p_key2 (ship_from_org_id) is88
Exiting OE_ORDER_CACHE.LOAD_ITEM
Dual_uom_control is FALSE
FTE IS NOT INSTALLED!
FTE IS NOT INSTALLED!
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for ENABLE_FULFILLMENT_ACCEPTANCE
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value fetched from table.
PARAMETER VALUE:
CSH --OUT of l_copy_service_field condition
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-5
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Entering OE_HEADER_UTIL.GET_IDS
LEAVING OE_MSG_PUB.ADD
Exiting OE_HEADER_UTIL.GET_IDS
Entering OE_HEADER_UTIL.GET_IDS
Exiting OE_HEADER_UTIL.GET_IDS
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PUB.PROCESS_ORDER
LEAVING OE_MSG_PUB.INITIALIZE
ENTER PROCESS_ORDER_AG
BEFORE HEADER PROCESSING
HEADER_ID
OPERATIONCREATE
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -1
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
ENTERING OE_ORDER_PVT.HEADER
OE_ORDER_PVT.HEADER AFTER INIT CONTROL REC
OPERATION = CREATE SO SET OLD TO NULL
Entering OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
Exiting OE_HEADER_UTIL.CONVERT_MISS_TO_NULL
ENTER OE_HEADER_SECURITY.ATTRIBUTES
VALIDATE ATTRIBUTES
Entering OE_VALIDATE_HEADER.ATTRIBUTES
Entering OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Exiting OE_ORDER_CACHE.LOAD_INVOICE_TO_ORG
Entering OE_ORDER_CACHE.LOAD_ORDER_TYPE
Exiting OE_ORDER_CACHE.LOAD_ORDER_TYPE
Entering OE_ORDER_CACHE.LOAD_Payment_Term
Exiting OE_ORDER_CACHE.LOAD_Payment_Term
Entering OE_ORDER_CACHE.LOAD_PRICE_LIST
Exiting OE_ORDER_CACHE.LOAD_PRICE_LIST
Entering OE_ORDER_CACHE.LOAD_Salesrep_rec
Exiting OE_ORDER_CACHE.LOAD_Salesrep
Exiting OE_VALIDATE_HEADER.ATTRIBUTES
DEFAULT MISSING
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for INSTALLMENT_OPTIONS
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE:
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
SET CODE
AFTER SET CODE
Enter get_freight_carrier()
Entering OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for SET_OF_BOOKS_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
ENTERING OE_SYS_PARAMETERS_PVT.GET_AR_SYS_PARAMS ...
Getting the AR details from the cache ..
Exiting OE_ORDER_CACHE.LOAD_SET_OF_BOOKS
AFTER DEFAULT MISSING
APPLY ATTRIBUTE CHANGES
Entering OE_HEADER_UTIL.APPLY_ATTRIBUTE_CHANGES
Raj1
Raj2
LEAVING OE_MSG_PUB.ADD
ENTER SET RECURSION MODE
ENTITY CODE-2
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST2
ENTERING DELETE_ATTRIBUTE_CHANGES -1
PO: EXITING PROCESS ORDER WITH UNEXPECTED ERROR
ENTER SET RECURSION MODE
ENTITY CODE-1
ENTRY-EXIT MODE -0
RECURSION MODE AT ENTRY -N
RECURSION MODE WITHOUT EXP AT ENTRY -N
RECURSION MODE AT EXIT -N
RECURSION MODE WITHOUT EXP AT EXIT -N
DELETE REQUEST12
ENTERING DELETE_ATTRIBUTE_CHANGES -1
LEAVING OE_MSG_PUB.COUNT_AND_GET 1
Entering OE_HEADER_UTIL.GET_VALUES
In OE_Contracts_util.check_license
cache already has value, OE_CONTRACTS_UTIL.G_BSA_CNTR_LICENSE: N
Exiting OE_HEADER_UTIL.GET_VALUES
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
ENTERING OE_SYS_PARAMETERS.VALUE
Going to get the value for MASTER_ORGANIZATION_ID
ENTERING OE_SYS_PARAMETERS_PVT.VALUE
Parameter value exists.
PARAMETER VALUE: 83
Request help.
Thank you
Vijosh
Edited by: user8690315 on Oct 20, 2009 12:19 AM

Hi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric.

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Not able to integrate SOA Suite with EBS using Oracle APPS Adapter

Hi,
We need to listen to outbound business events of Oracle EBS using BES via Oracle APPS Adapter.
We have created a composite containing Oracle Application Adapter and BPEL Process.
In Apps adapter when configured Outbound Business events "oracle.apps.bom.component.modified" using Dequeue Operation,a corresponding subscriber is created in WF_BPEL_Q for respective event selected.
In Oracle EBS
for "oracle.apps.bom.component.modified" status is enabled and in subscription WF_BPEL_QAGENT is there.
When we are changing any BOM component in Oracle EBS Designer and saving it, a record is being created in "WF_BPEL_QTAB".
BPEL Process( Oracle Apps Adapter Partner Link---> Recieve Actvity ) instances are not being created when any BOM component is being changed.
Oracle Apps Adapter is not able to dequeue the data from WF_BPEL_QTAB.
There is not any error/exception in oracle soa suite server logs for Oracle APPS adapter.
SOA Diagnostics Logs are :
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.bpel.engine] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] CubeServiceEngine=> initing default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea/BPELProcess1
[2012-07-04T08:55:51.304+05:30] [AdminServer] [NOTIFICATION] [] [oracle.integration.platform.blocks.deploy] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Publishing deploy event for default/Testr!4.0*soa_f1fe3bbc-1269-437c-a75f-1239da743fea
[2012-07-04T08:55:51.382+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Loading bom_cm_apps.jca ..
[2012-07-04T08:55:51.390+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing JCAEndpointActivation::prepareActivation for {AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}
[2012-07-04T08:55:51.391+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Locating JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> JCABinding=> Instantiating inbound part of JCA Binding Component instance: SCA_AS11R1
[2012-07-04T08:55:51.397+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:[[
endpoint='bom_cm'
WSDL location='oramds:/deployed-composites/default/Testr_rev4.0/bom_cm.wsdl'
portType='DEQUEUE_ptt'
operation='DEQUEUE'
*activation properties={AppsEventSchema=ANY_SCHEMA, MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.bom.component.modified', Consumer=ORA_8cpkad9l88sj0c9n8kq42ghm85, QueueName=WF_BPEL_Q, DatabaseSchema=APPS}*
[2012-07-04T08:55:51.398+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::initiateInboundJcaEndpoint - Creating endpoint (0) for bom_cm
[2012-07-04T08:55:51.407+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::prepareActivation - Done preparing JCAEndpointActivation for Service 'bom_cm'
[2012-07-04T08:55:51.409+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :load Successfully loaded bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Initializing bom_cm_apps.jca
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm JCAEndpointActivation::performActivation - Performing JCA Endpoint Activation, Endpoint Id='bom_cm'
[2012-07-04T08:55:51.410+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> bom_cm Performing endpoint activation (1) for bom_cm
[2012-07-04T08:55:51.411+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE
[2012-07-04T08:55:51.416+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr Creating new instance of Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.417+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - starting Resource Adapter oracle.tip.adapter.apps.AppsResourceAdapter
[2012-07-04T08:55:51.471+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Starting...AQResourceAdapter
[2012-07-04T08:55:51.474+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Creating Endpoint...
*[2012-07-04T08:55:51.482+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] Oracle Applications Adapter Activating Endpoint...*
*[2012-07-04T08:55:53.782+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> Testr JCA Binding Component instance: SCA_AS11R1 - successfully completed endpointActivation for portType=DEQUEUE_ptt, operation=DEQUEUE*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,0] [APP: soa-infra] JCABinding=> [Testr.bom_cm/4.0] :init Successfully initialized bom_cm_apps.jca*
*[2012-07-04T08:55:53.783+05:30] [AdminServer] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c8ccf1] [userId: weblogic] [ecid: 1ae79e0a6c47b292:-ec3eb:1384ffb303d:-8000-0000000000000312,1:30342] [APP: soa-infra] Dequeue Agent activated....*
Regards,
Abhinav Gupta
Edited by: Abhinav on Jul 5, 2012 9:56 AM

We would like to capture a few business events in oracle BOM and PO that are of interest to us. In order to do this,
we deploy oracle SOA composite with BEPL in the Oracle Fusion Middleware Control. The oracle SOA composite is configured for a particular outbound business event. It should listens on a specific queue WF_BPEL_Q or WF_BPEL_QTAB and de-queues the messages from that Oracle Queue or Oracle AQ Table. In jDeveloper 11g we created a SOA project with oracle applications adapter partner link and a receive.
Specifically we are trying to capture the business outbound event oracle.apps.bom.component.modified just to get the event data in this receive.
Partner link configuration: We added the database connection to the oracle EBS instance. Tested it and we
succeded. Chose ANY_SCHEMA in partner link configuration.
We ensured that the JNDI Name here( eis/Apps/Apps ) match the JNDI name provided in the weblogic-->Deployments--
OracleAppsAdapter -->Configuration --> Outbound Connection Pools. For this outbound resource pool, Connection factory interface was javax.resource.cci.ConnectionFactory. Property name xADataSourceName was mapped to JNDI name of the configured JDBC datasource in the weblogic. When we created the connection pool. We tested and it worked fine. This data source had the connection pool configured to the oracle applications schema with APPS user.
After adding the partner link with the above configuration, we added a receive. We deployed this configuration to the middleware. We went to the oracle EBS modified a BOM component and we expected to having running BPEL instances against the deloyed composite. However, the problem is we are not having any running instance for the composite.
We found that there are entries in the view AQ$WF_BPEL_QTAB with an ENQ_TIME and ENQ_TIMESTAMP but with no DEQ_TIME or DEQ_TIMESTAMP. The ENQ_TIMESTAMP corresponds to the time we modified BOM in oracle BOM forms/Designer
The data is being written in WF_BPEL_QTAB for the BOM changes but not being dequeued by oracle applications adapter/composites deployed in soa server.
Please help me it quite urgent.
Is there anything we are missing on EBS side to be activited. for the events to be dequeued
Any Help is appreciated.
Abhinav

Oracle Applications Adapter - working with EBS R12 (inbound/outbound)

Hi,
Need to integrate Siebel CRM 8.1.1.5, Oracle EBS 12.0.4, and few other third party systems.
Planning to use Fusion middleware to integrate, and also use Oracle Applications Adapter.
Query -
We would like to know how EBS can work with Oracle Applications Adapter, best practices regarding this.
We've inbound, and outbound from EBS, for multiple modules.
Thanks,
Meera

You already got an answer by "X A H E E R" in your other thread, so why posting duplicate threads? -- Re: Oracle Jdeveloper Integration with EBS R12.1.3
You have also posted the same question in "JDeveloper and ADF" forum! -- Re: Integrate Jdeveloper with Oracle E-Bussiness Suite for reporting

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

How to set file permission using Oracle FTP Adapter

Hi,
I am using Oracle SOA Suite 11.1.1.4. I am trying to put a file using Oracle FTP adapter on unix box. The file that gets written to target system has file permission as RW/R/R. But this is a legacy system, and for them to consume this file - they expect the file permission to be RW/RW/R.
They have set the .profile with the required permissions for the ftp user account that we are using. But still when my BPEL process writes a file to unix box through ftp adapter, the file permission is RW/R/R.
Is there any way to control file permissions while writing files using ftp adapter? Any help would be highly appreciated.

907597 wrote:
But these setting needs to be done on unix server. Yes, that's the way to go... There's no config for that on FtpAdapter as far as I know...
This setting will enable the same configurations for all other ftp accounts on the server, which doesnt sound correct. Any other way of doing this? Or can this be done only for one ftp account?You have to check if your ftp server is capable of having different umask for different ftp users... I believe most do not...
http://h30499.www3.hp.com/t5/System-Administration/Setting-FTP-umask-per-user/td-p/2590101#.UMZ0TeEe7ng
Cheers,
Vlad

How to create a deployable ejb(.jar file) when we use Oracle application sever?

Hi,
In case if we use Weblogic we give following command on console to create a deployable ejb, while weblogic.jar is in classpath.
java weblogic.ejbc temp.jar StudentBean.jar
1)What are the classes or jar files we have to set in classpath,
2)What console based command(like what I mentioned above for weblogic) can we use,
so that we can create a deployable jar file in case if we are using Oracle application server.
thanks,
Milind

You can discover the origins of a loaded class programatically. You want to print:
TheClass.class.getProtectionDomain().getCodeSource().getLocation().toString();

Clone Oracle Applications 11i using Oracle Application Manager

Hi All,
I am working on the following Metalink documents:
*[Note: 398619.1 - Clone Oracle Applications 11i using Oracle Application Manager (OAM Clone)|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=398619.1]*
I am bit confused, if I am doing Cloning with OAM and providing all the information about the target system how does it work?
Is it that, cloning with OAM will make the required templates and I will have to just take the backup of my database and application and have to restore it on target machine and cloning is done!
Please suggest,
Anchorage

Is it that, cloning with OAM will make the required templates and I will have to just take the backup of my database and application and have to restore it on target machine and cloning is done!This is not enough. You still need to complete the following steps on the target node:
Task 5: Configure the Target System
Task 6: Initiate Data Purge
Task 7: Review Checklist

Integration with PeopleSoft Applications Using Oracle SOA Suite 11g BPEL

Hi,
I'm integrating BPEL with Peoplesoft FSCM 9.0 Application on tools 8.49 using Oracle SOA Suite 11g. The BPEL invokes the web service method generated from Peoplesoft Component Interface in a synchronuos manner.
I have deployed the BPEL in Oracle SOA Suite 11g using Jdeveloper successfully but I have problem in configuring the BPEL node in Peoplesoft side using Oracle SOA Suite 11g(FMW) . I had done the integration of BPEL with Peoplesoft FSCM 9.0 on tools 8.49 using Oracle SOA Suite 10g earlier successfully by configuring BPEL node properties as follows:
BPEL CONSOLE : http://Host Name:8888/BPELConsole (System with Oracle SOA Suite 10g server for deployment)
BPEL DOMAIN : default
Using this BPEL node configuration, I was able to ping the BPEL console of Oracle SOA Suite 10g from peoplesoft and hence complete the integration successfully.
Now in order to acomplish Business rules and other functionality, the BPEL application has been developed in Oracle SOA Suite 11g using Jdeveloper 11g. This time I'm not able to configure the BPEL node in Peoplesoft for this integration as I'm assuming there is no separate BPEL console in Oracle SOA Suite 11g. All the BPEL deployments are administered in console (11g console used for deployment of BEPL)
http://Host Name:7001/em (System with Oracle SOA Suite 11g server - Fusion Middleware).
So when I Configured the BPEL node property in Peoplesoft as :
BPEL CONSOLE : http://Host Name:7001/em (System with Oracle SOA Suite 11g server for deployment)
BPEL DOMAIN : default
I'm not able to ping the Peoplesoft BPEL node to the Oracle SOA Suite 11g. Hence I'm not able to proceed with my integration.
When I searched the OTN discussion forum on BPEL console for Oracle SOA Suite 11g, all threads point that there is no separate BPEL console unlike Oracle SOA Suite 10g. Also most of the articles for Integration with Peoplesoft Application using SOA 11g do not state any specific configuration setting for property of Peoplesoft BPEL node in order to integrate with BPEL 11g. The examples published in OTN still point towards screen shots of integration using SOA Suite 10g.
So I'm not able to proceed in this regard.
Any help in this regard is highly appreciated.
Thanks in Advance,
Girish
Edited by: user11214154 on Nov 23, 2009 8:12 PM
typo error

Hi,
I found this document from the Oracle Open World 2009 (maybe you have found it too) :
"Integration with PeopleSoft applications using oracle soa suite 11g BPEL" --> [http://www.oracle.com/technology/tech/fmw4apps/peoplesoft/pdf/oow2009-bpel-psft.pdf]
And this could be a little more simple, but have a good step-by-step tutorial.
[http://www.oracle.com/technology/obe/fusion_middleware/fusion/soa/BPEL_PS848/OBE_PSFT_BPEL_848.htm]
I think you must read this docs by now, but never come amiss.
Hope this can help you,
By the way, if you can help me with this I'll appreciate it a lot.
Unable to access the following endpoint(s)

Using Oracle Apps Adapter for apps_applcon user

Hi,
We are trying to use oracle apps adapter for our BPEL flows using FM11g (Jdev11gR1). We came to know that it will work for only apps user.
We have apps_applcon user. How can we use that?
Is there any way we can tell oracle apps adapter to user apps_applcon user?
Any help would be greatly appreciated.
Thanks in advance.
Thanks & Regards,
Rama Krishna. P

We also have same requirement. We have BPEL connection using custom oracle user, xx_b2b and when we use APPS adapter, I can not see and use any business event.
If anybody across same requirement, please share your experience.
Appreciate help on this.
Thanks,
Sonartori

How to increment GL Period using Oracle Application concurrent program scheduler

Hi All,
In R12, I came to know that we can increment GL Period also using Oracle Application Concurrent Program scheduler.
We have a requirement to schedule 'Account Analysis Report' for different legal entities. We would need to increment GL Periof for each department.
In 11i, we can not increment GL Period.
Is there a way, to increment GL Period to schedule 'Account Analysis Report'
Please advise.
Appreciate your time and help.
Oracle Application Version: R12.1.2
thanks in advance,
Ganesh

Hi,
could you please help me?
thanks.

Workspace Issue Using Oracle Application Server

Dear All,
I've configured my Workspace using Oracle Application Server and now I can login to my workspace through this url http://<servername>:7777/workspace/.
But somehow, at my workspace home, I cannot find the folder or Explore inside, which is to see my Financial Reporting.
I'm login using admin and the privileged is already for administrator.
Is there anyone ever face this problem..??
Thanks.
Regards,
V13N

1. Correct the following path
extension_dir = "D:/php/ext"
(if your php is installed in D:/php, the above path is correct.
2. Find the line ;extension=php_oci8.dll
delete comment sign (;) and it will be :
extension=php_oci8.dll

Workspace Congifuration Using Oracle Application Server

Hi All,
Is there some of you ever try to configure the Hyperion Workspace 9.3.1 using Oracle Application Server 10.1.3.1.0..??
I've tried, but it seem like failed. I cannot access the workspace at all.
I did some configuration in this part :
- Workspace - Administration - Server Properties
- configure the portlet.xml at <>\Workspace\applications\Workspace\workspace\WEB-INF\
- change the config.bat at D:\Hyperion\BIPlus\bin
Any suggestion for this problem..??
Thanks.
Regards,
V13N

1. Correct the following path
extension_dir = "D:/php/ext"
(if your php is installed in D:/php, the above path is correct.
2. Find the line ;extension=php_oci8.dll
delete comment sign (;) and it will be :
extension=php_oci8.dll

SQL types over PLSQL types while using Oracle Applications adapter in BPEL

Similar Messages

Maybe you are looking for