Issue with Upload wizard in APEX 4.2

Hi,
We have APEX 4.2. We have a table with 70 columns. So to load data to that table we are using upload data wizard. Due to 50 columns limitation in APEX upload wizard, we have divided the upload file in two parts , file 1 with first 40 columns and file 2 with 30 columns and both of them have same primary keys included.
When we load the data to the table through file 1 , data is loaded successfully but when we try to load file 2 , wizard shows data was updated but the data is not reflected in the table. What could be the reason ? Please advice.
Regards,
Andy

Hi Pat,
So currently we are using the following approach
1. Split the file into two files (file 1 and file 2) with primary key included in both the files.
2. We have two temp tables where these files will be uploaded resp, and it will also capture the username in the tables.
3. When the 2nd file is done uploading ,we match the # of rows in both the tables by that user if it matches we run a sql to insert/update data in the actual table.
4. If the record count doesn't match (means if file 1 and file 2 are not in sync) we delete the data from the temp tables just for that user and then user can reload it.
5. Once the insert/update is done and when the user tries to load the file again , we delete old data from the temp tables just for that user.
So every time user loads data ,it will maintain data only for that load.
So this way multiple users are able to upload files.
Also currently we finished development of alternate method to load entire file at once.In this approach we are not using upload utility, we have option where user can upload the file (1st page of upload utility) and then procedure is kicked of to get the file from wwwv_flow_files (APEX table) from a BLOB column.
Data is parsed using a procedure and then inserted/updated into the original table.
I hope this helps. Kindly let me know if you need more details.
Thanks and Regards,
Andy

Similar Messages

Security Issues with uploading files into APEX - How is anti-virus handled?

Hi APEXers!
We have been using APEX 3 for some time and are now migrating to APEX 4. We have a request for a new application that will require uploading spreadsheets. From other developers, I know it can be done in a few ways. The only thing we have done before is limitied - storing them in BLOBs.
With the Websheets in APEX 4, users could load them directly into the database.
But the anti-virus issue has always been unclear. For the apps that we are allowing to upload to BLOBs, they are small user, internal apps so we hope that our enterprise desktop software will stop a bad file before it gets uploaded.
We have gotten some questions about allowing outside-our-network people to upload spreadsheets or maybe even the public. So far, our security people have just said no - but I wondered what everyone else is doing?
Are there any White Papers or articles on this? My general impression is that anti-virus software has to be installed at the server level to deal with this.
If anyone can provide some guidance, I would appreciate it as I have to figure out what to tell the development team requesting to do this.

Do you have to take excel format? CSV would be a lot safer.
You might take inspiration from this:
http://stackoverflow.com/questions/3363767/how-do-you-virus-scan-a-file-being-uploaded-to-your-java-webapp-as-it-streams

Issues with patch wizard utility

We downloaded the infobundle manually due to issues with metalink credentials, When we go to run a patch recommendaiton report (with the second filter in the list) it is still giving the error in the log:
"WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link."
Why would it fail if you have already downladed the bundle manually.
Also it shows further down the error log:
"Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing"
Edited by: user599292 on May 7, 2013 2:37 AM

;) ApPsMasTi ;) wrote:
user599292 wrote:
All that link essentially says is download the infobundle file - then run the report. yes we've done both and it still doesnt work.
How can you tell if its in a directory that "patch wizard" can access? who is the owner of the staging directory
please post the the path of staging directory and the owner directory and infobundle.zip
"Zip file needs to be copied to a system which can access the Patch Wizard staging directory. If the staging directory is on local disk, it must be copied to the system where you run Patch Wizard. If the staging directory is on shared (network) disk, it can be copied to any system with access to the shared disk"
"Make sure the Patch Wizard can read from and write to the staging directory. " - how can you test this?create a file by application user on the stage directory
;) APpPSMAsTi ;)
Sharing is Caringthe server side of the application isnt really a strong point of mine, the staging directory is set up to be backup/patches/apps
I am not to sure what you mean by "owner", or the application user.
here is the error log if of any use:
"Start of the concurrent Program .. [################]
.........PARAMETERS ..................
Parameter name :CRITERIAID::Parameter value : Recommended Patches
Parameter name :ImportPatchInfo::Parameter value : Y
Parameter name :useproducts::Parameter value : Y
Validating Staging directory '/backup/patches/apps'
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Calling InfoBundle Upload Program for Patchlist.... [##############]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Starting Upload Process...
Program Execution Start time: [#################]
Stage Dir is /backup/patches/apps
Infobundle Path /backup/patches/apps/InfoBundleR12.zip
Downloading InfoBundle starts: [##############]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: MetaLink Connection setup not found. Please manually download Infobundle zip file to staging directory.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link.
Downloading InfoBundle ends: [##########]
Checking for Infobundle in Staging Directory ...
Warning: InfoBundle doesn't exists in /backup/patches/apps
Trying to Recommend using previously uploaded Infobundle ...
**Warning: Request Completion**
Warning: Request Completion
**Warning: Request Completion**
Program Execution End time: [###############]
End of InfoBundle Upload Program ...... [##################]
Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
36
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is ####
+---------------------------------------------------------------------------+"
Edited by: user599292 on May 7, 2013 4:33 AM
Edited by: user599292 on May 7, 2013 4:35 AM

Issue with Upload of PDF

Hello,
I have converted an eFolio I received from my hotel into a PDF - and I can upload the PDF no problem and assign/attach to my expense report. However, when I am editing the expense report and try to "view" the PDF - the system does not apepar to recognize it and asks me to "save" the PDF (and it gives it a funny number also).
In the end - I took a photo of my printed hotel receipt to make a jpg file and submitted from my mobile device - but we do need to resolve the issue with the pdf.
The system seems to have no problem with the PDF it has of my itinerary. Also, when I open the PDF from my desktop - adobe acrobat opens no problem - so the PDF seems to be fine.
Any assistance would be appreciated as having to print my eFolio so I can take a photo of it is a waste of time and resources.
Thanks,
Steve Monk,

For a list of supported file types, please refer to the Help Center document "Claiming Expenses" > Main Tasks > Attaching Receipts.

Authorization issue with upload functionality

Hi,
I have issue with authorization with upload functionality.
we have country as authorization relavant field. if we are giving some country authorization to user it is giving authorization error at upload functionality.
But if we give all country authorization than it is working fine.
Could you guide me how to avoid this situation. We can not give all country authorization to all the users.
Thanks,
Naman Shah

Hi Naman,
For SAP BPS
Here while defining a variable you can set the user authorization and can determine which all records can be seen by the user.
For eg. Create a variable for country with replacement type User-specific values. Here you can assign values to a particular user id.
Please check for more details:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/548bafbc0f357ee10000000a11466f/frameset.htm
For SAP IP
Please Check: User Authorization in SAP IP
Regards, Rishi
Edited by: Rishikesh Sinha on May 6, 2009 8:01 AM

N82: issue with sett. wizard

Hi All,
I'm using a black N82 with the latest FW (V20.0.062) and whenever I try to open the Sett. wizard the phone is freezing (only the wallpaper is displayed). Only a restart (by removing the battery) recovers the phone. I tried also a reset to the factory settings but the problem remains...
Anyone knows a solution to this problem?

Thanks again for your prompt response.
I've never installed additional applications on my phone.
The following 'items' have gone 'into' the phone since purchase:
1. Mp3 songs.
2. Contacts via the sim directory.
3. a Powerpoint presentation via data transfer mode (nearly a month ago, but my issues with the phone surfaced a week ago....so no problem with the ppt i guess)
4. camera pics, MS outlook calender, to-do and Text messages routinely syncd between my phone and laptop.
5. Bluetooth transfer out of my phone to another phone for a transfer of pics taken.
Again many weeks ago not followed by adverse effects...
Thanks, it'll take me a while to understand SYNCML. Ill read and try to understand soon.
But then wont PC suite take care of contacts backup n restore,etc?
If so, where can i find the contacts stored in my computer and in what format?
For instance, the photos and text msgs - synced - are stored in Lifeblog folder under my documents folder and can be easily accessed via the LifeBlo application both on the phone and the computer/laptop.
PS: I also managed to update the software today, with the help of Nokia Software updater app on my laptop.
Keeping this all in mind:
I reckon, the m-card and perhaps phone memory are affected. Maybe the camera application as well.
If this is proved, i think, then i m-card format and hard reset is the way forward.
Thanks again.

Mime Type issue with .docx Files in Apex 4.0

We are having issues with windows 2007 .docx documents that are when they are viewed on windows 2007 machines with ie8. If I look in the storage table the mime type is not set correctly. It is being set as application/octet-stream. When we download the file one windows 7/IE8 either the browser thinks it is a zip file or it does not recognize it.
If I go into the back end and update the table with the correct mime type application/vnd.openxmlformats-officedocument.wordprocessingml.document it works fine.
We have tried to update mime types on the apache server but this does not help.
Apex seems to be deciding what mime type to populate the table with.
It seems like I need to update apex somehow to recognize that a .docx extension should be stored as type mime type application/vnd.openxmlformats-officedocument.wordprocessingml.document.
Does anyone know how I would do this?
We are running Apex 4 on 10g IAS with mod/plsql
are application is setup very similar to what is describe in this document by David Peak
http://www.oracle.com/technetwork/issue-archive/2009/09-jan/o19browser-087025.html
Edited by: user7660930 on Apr 18, 2011 7:40 AM

I thought about trying to do something similar to the code above but would prefer that apex would work properly.
I created a page with the sql region and added this code
owa_util.print_CGI_ENV
when I run it it shows the following environment variables. It look like the WebDB environment HTTP_ACCEPT value needs to be updated. Does any one know how to update this information on a 10gIAS server and were it is stored? I have some documenation on WebDB but none of it seems to point to the correct location of the files and there are no admin pages
PLSQL_GATEWAY = WebDb
GATEWAY_IVERSION = 2
SERVER_SOFTWARE = Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server
GATEWAY_INTERFACE = CGI/1.1
SERVER_PORT = 4445
SERVER_NAME = admsunxapp04.ad.jocoks.com
REQUEST_METHOD = GET
QUERY_STRING = p=301:1:3167922978599440:::::
PATH_INFO = /f
SCRIPT_NAME = /pls/apex/sand
REMOTE_ADDR = 172.16.14.100
SERVER_PROTOCOL = HTTP/1.1
REQUEST_PROTOCOL = HTTPS
REMOTE_USER = APEX_PUBLIC_USER
HTTP_USER_AGENT = Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; Tablet PC 2.0)
HTTP_HOST = admsunxapp04.ad.jocoks.com:4445
HTTP_ACCEPT = image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
HTTP_ACCEPT_ENCODING = gzip, deflate
HTTP_ACCEPT_LANGUAGE = en-US
HTTP_ORACLE_ECID = 1303315270:172.16.2.9:3032:0:2526,0
WEB_AUTHENT_PREFIX =
DAD_NAME = apex/sand
DOC_ACCESS_PATH = docs
DOCUMENT_TABLE = wwv_flow_file_objects$
PATH_ALIAS =
REQUEST_CHARSET = AL32UTF8
REQUEST_IANA_CHARSET = UTF-8
SCRIPT_PREFIX = /pls
HTTP_COOKIE = ORA_WWV_R1=%23ALL; ORA_WWV_R2=%23ALL; ORA_WWV_R3=%23ALL; ORA_WWV_ATTRIBUTE_PAGE=4651%2C%23ALL; ORA_WWV_REMEMBER_UN=ADMIN:apex_app; ORA_WWV_USER=8A32E6579024A4F4; oracle.uix=0^^GMT-5:00; DEVL=WaSkGBNfJ6-Vgpw-6HXpHvM8:S

Issue with upload of time events through SAPCDT45

Dear Consultants,
I am facing an issue while uploading the clocking data for locked entries.
When the entries are uploaded from CC1TEV to TEVEN table using program SAPCDT45, "Changed By" and "Changed On" fields
are coming blank in PA30 IT2011
PFA the screenshot describing the current situation for such a record updated via SAPCDT45.There you can see that the change information is not getting updated. whereas in normal cases where the data is uploaded directly to TEVEN table, this data is coming properly.
Kindly help.
Regards,
Udit Singhal

Hi Udit,
There are three fields in CC1TEV which must be filled if you wish to update UNAME and AEDTM fields in IT2011.
ERDAT - Date of Entry in SAP
ERTIM - Time of Entry in SAP
USRUP - User who uploads the data
In real time, the flat file will come through an interface from time recording system. It won't have data for the above fields. Hence, the program RPTEUP10 should be modified to update these fields.
When the program SAPCDT45 runs, it will read these values to update UNAME and AEDTM fields.
I have already implemented this for a couple of clients and I can assure you that it works.
Also, RPTEUP10 doesn't work in sequential file mode which will be needed for picking up file from SAP Application Server. Hence, you will need to customize the program.
Please refer my blog where I have explained in detail why we need to customize program RPTEUP10.
I hope this information is helpful and resolves your query.
Thanks and regards,
Vivek Barnwal

DW CS5 -- Issues with uploading files to server

Hi everyone -- I recently took over control of a website that hasn't been updated in years. I am in charge of redesigning the site, but need to keep what we have up-to-date until the new site is ready to roll out. I received the FTP info for the server and got site files into local folders so I can make changes. I've made changes to one file (index.html) and am trying to put that file back onto the server; but in the file transfer process, the dependent files do not get uploaded (I get a message saying "'fileName' - same - not transferred"). The one file that I have changed, and Dreamweaver says has been uploaded, is not updating on the web. I checked the file on both my local and remote view and both reflect the changes I have made -- just not the actual site on the web.
I'm sure that's a little confusing, so I'll try to summarize (with bulletts!):
I have correct FTP info to server
I downloaded site files from server to local folders
I edited index page, and put the file to the server
Dreamweaver indicates that the file has been successfully uploaded
Local view shows edits I have made
Remote view shows edits I have made
Other dependent files have not been uploaded ("'fileName' - same - not transferred" error message)
Actual website does not reflect changes made to index page
What am I doing wrong????
Thanks in advance for any help you can provide!

Filezilla is a free, open source FTP client. It's a standard desktop application. An FTP client connects to a server using the File Transfer Protocol and allows you to transfer files up to the server (upload) or download files from the server (download).
Why use a separate FTP client rather then the FTP functionality built-in to Dreamweaver? Because, in my experience, it works better the Dreamweaver's sometimes flakey FTP functionality and it's easier to troubleshoot FTP issues.
In Firefox, to clear the cache, go to Tools -> Advanced -> Click Network Tab -> Click "Clear Now" button. Hit F5 to refresh the page and see what changes (if caching was the issue). If nothing changes then for some reason your files are not being uploaded properly to the server. In that case I'd check to make sure you're loading your files to the correct directory on the server (usually a folder called "httdocs" or "www" - check with your hosting company to amke sure).
Hope this helps.

Issue with uploading XML file from application server into internal table

i Need to fetch the XML file from the application server and place into internal table and i am getting error message while using the functional module   SMUM_XML_PARSE and the error message is "line   1 col   1-unexpected symbol; expected '<', '</', entity reference, character data, CDATA section, processing instruction or comment" and could you please let me know how to resolve this issue?
    TYPES: BEGIN OF T_XML,
             raw(2000) TYPE C,
           END OF T_XML.
DATA:GW_XML_TAB TYPE T_XML.
DATA: GI_XML_TAB TYPE TABLE OF T_XML INITIAL SIZE 0.
DATA:GI_STR TYPE STRING.
data: GV_XML_STRING TYPE XSTRING.
DATA: GI_XML_DATA TYPE TABLE OF SMUM_XMLTB INITIAL SIZE 0.
data:GI_RETURN TYPE STANDARD TABLE OF BAPIRET2.
    OPEN DATASET LV_FILE1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF SY-SUBRC NE 0.
      MESSAGE 'File does not exist' TYPE 'E'.
    ELSE.
      DO.
* Transfer the contents from the file to the work area of the internal table
        READ DATASET LV_FILE1 INTO GW_XML_TAB.
        IF SY-SUBRC EQ 0.
          CONDENSE GW_XML_TAB.
*       Append the contents of the work area to the internal table
          APPEND GW_XML_TAB TO GI_XML_TAB.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
* Close the file after reading the data
    CLOSE DATASET LV_FILE1.
    IF NOT GI_XML_TAB IS INITIAL.
      CONCATENATE LINES OF GI_XML_TAB INTO GI_STR SEPARATED BY SPACE.
    ENDIF.
* The function module is used to convert string to xstring
    CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
      EXPORTING
        TEXT   = GI_STR
      IMPORTING
        BUFFER = GV_XML_STRING
      EXCEPTIONS
        FAILED = 1
        OTHERS = 2.
    IF SY-SUBRC <> 0.
      MESSAGE 'Error in the XML file' TYPE 'E'.
    ENDIF.
ENDIF.
IF GV_SUBRC = 0.
* Convert XML to internal table
    CALL FUNCTION 'SMUM_XML_PARSE'
      EXPORTING
        XML_INPUT = GV_XML_STRING
      TABLES
        XML_TABLE = GI_XML_DATA
        RETURN    = GI_RETURN.
ENDIF.
READ TABLE GI_RETURN TRANSPORTING NO FIELDS WITH KEY TYPE = 'E'.
IF SY-SUBRC EQ 0.
    MESSAGE 'Error converting the input XML file' TYPE 'E'.
ELSE.
    DELETE GI_XML_DATA WHERE TYPE <> 'V'.
    REFRESH GI_RETURN.
ENDIF.

Could you please tel me why the first 8 lines were removed, till <Soap:Body and also added the line <?xml version="1.0" encoding="UTF-8"?> in the beggining .
Becuase there will be lot of XML files will be coming from the Vendor daily and that should be uploaded in the application server and should update in the SAP tables based on the data in the XML file.
what information i need to give to vendor that do not add the first 8 lines in the XML file and add the line in the beggining <?xml version="1.0" encoding="UTF-8"?>   ??????
Is there any other way we can do with out removing the lines?

Issue with double quotes in APEX 3.1

Hi,
Recently we have upgraded our APEX environment (both production and development) from HTMLDB 2.0 to APEX 3.1.
Users reported that when they cut/paste data from word document into forms, double and single quotes in the data are displaying as weird symbols like "¿".
Surprisingly we have this issue in our production environment only not in development environment. I am guessing there must be setting which is causing this issue.
Please help me to resolve the issue and let me know if you want more details.
Thanks,
Lakshmi

It's most likely this is caused by non-standard Microsoft character encoding in combination with default "auto correct" behaviour in their products that users may not even be aware is operating. "Smart Quotes" are the culprit in this case.
As it is highly unlikely that your users will be able to stop using these products, the best options are: turn off the offending features in MS software; educate users about the source of the problem and get them to replace the errant characters with the relevant ASCII or Unicode character or "decimal numeric character reference" when transferring to DB/web (worthwhile bearing some context in mind here: ASCII apostrophes and quotes are probably best for values stored in traditional database columns as they may be used in a number of different applications); try to write some kind of translator in your database/application that fixes the incorrect characters.
That this is occurring in one environment but not the other may indicate that there's a character set difference somewhere in the stack, but the human element may be coming into play as well: developers encounter this problem frequently and often turn off "smart quotes" as a result!

Issue with path reference in apex.min.css file using Theme 25

Hi all.
I upgraded recently to Apex 4.2.1.00.08 and my existing applications had been working fine. I then thought I'd changed the theme to Theme 25 as it was a new one available to me. This was fine and the application works well however I wanted to test a change to the css so I copied the apex.min.css file and renamed it as apex.min_copy.css. I made my small change, which was just a change to the background colour of the table in apexir.WORKSHEET. I then uploaded this through the shared components and referenced it in my header using
#WORKSPACE_IMAGES#apex.min_copy.cssI also commented out the referenced to #APEX_CSS# in the header so it would use my uploaded copy and not be overridden.
When I then ran the application again, it prompted me for the xdb username and password. I tracked this down to lines in the css file where the relative path to an image in the file was like ../ws/image_name
For example:
background-image : url(../ws/report_bg.gif);I took these lines out, uploaded again and it was fine and my change was visible, meaning that the #WORKSPACE_IMAGES#apex.min_copy.css was being read correctly. I can also browse the location of these files on the xdb database using a browser connected a system and I can see the files where i expect them to be.What I cannot understand is how other references to images in this css file such as
background : url(../apex/builder/dev-bar.png) 0 0 repeat-x transparent;
background-image : url(../htmldb/builder/builder_find_bg.png);do not cause an issue but the one mentioned earlier(/ws) does
I hope someone has an idea .
Thanks,
Colm Dickson

Mark,
Modifying the default files is dangerous and ill advised. You could always just add a style sheet (inline or linked) to your application that overrides that one setting while you wait on the permanent fix.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Is anyone else having issues with uploading imovie app videos to youtube?

hello everyone one. im scared as heck for posting in here because im honestly afraid all the smart people in here will eat my eyes for ju-ju bees, however here it goes, and thank you to anyone brave enough to help. I've just had the iphone 4s for over a week. as of today, i can not upload any of the imovie app movies to youtube, which was a huge selling feature for me, so i could post video testimonials on the run and not be so invisable on the weekends as a musician. "ive been invisable on social media on weekends as long as ive even known about facebook, and I know its been hurting me."
my first two videos, uploaded without a hitch to facebook and you tube. of course a larger one had to wait until i got home to wifi bc it was too big. anyhow, this morning, my new one made it up to facebook, but a you tube upload has failed 5 times already, and this is upsetting.. only being a musician, taking this step to having a data plan and iphone was a huge risk, but i planned on maxing out what i could from the phone to make it even easier to support my family..
any ideas? please keep in mind im not a teckie, and cant even synch it up to my 5 year old laptop yet... ill be taking an hour trip to the apple store soon to do that.....

Hey there Jezza717,
Thank you for using Apple Support Communities!
If the iTunes window is not loading properly, I would try closing all the apps that are running:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close http://support.apple.com/kb/ht5137
Then restart the iPhone:iOS: Turning off and on (restarting) and resettinghttp://support.apple.com/kb/ht1430 If that does not resolve the issue, try the troubleshooting steps outlined in this article:Can't connect to the iTunes Storehttp://support.apple.com/kb/TS1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General >Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General> Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check theuser guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Cheers,
Sterling

Webutil - issue with uploading text files with client_get_file_name

Hi,
I'm using webutil client_get_file_name to upload files from the client machine to the server.
It works fine for xls,pdf,doc files etc. but not for txt files it seems.
It doesn't display any error at all either.
Has anyone seen this type of issue before?
Kind regards,
Tom
Windows XP
Forms v10.1.2.0.2

Hi Sarah et al,
The code that I'm using to upload any file type format is:
vfilename := client_get_file_name('c:\',file_filter => 'All files (*.*)');
it works for doc/pdf/xls/rtf/csv etc.
but not for text files i.e. .txt
Also, could someone tell me how to open a .msg (Outlook message) file
as it gives the output:
'Cannot read item' upon the opening of the Outlook application.
I'm using the following to try and open it:
CLIENT_HOST( 'cmd /C start '||p_filename);
Your help would be appreciated.
Kind regards,
Tom

Issue with configuration wizard

Hello,
I am trying to build a sandbox just like our production which has 1 Admin, 2 WFE's and 1 SQL on all different servers. I have installed SQL, Installed admin but while installing WFE1 I had an issue as the drive letters of Admin and WFE1  so
I had to uninstall and reinstall WFE1 (did not get to WFE2 yet). When I ran the configuration wizard on WFE1 I got the error as below
======================
An exception of type System.InvalidOperationException was thrown. Additional exception information: The current server cannot be joined to this farm because the set of installed products does not match the products installed in the farm.
The license state for the current server doesn't match the farm's license state.
System.InvalidOperationException: The current server cannot be joined to this farm because the set of installed products does not match the products installed in the farm.
The license state for the current server doesn't match the farm's license state.
   at Microsoft.SharePoint.Administration.SPFarm.Join()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
=========================
After some research online I figured GUID's in my configuration DB's and GUID in the registry of WFE1 are different. So I followed the article
http://blogs.msdn.com/b/sowmyancs/archive/2012/08/08/the-license-state-for-the-current-server-doesn-t-match-the-farm-s-license-state-sharepoint-psconfig-error.aspx .
So from the article I ran
Set-SPFarmConfig –InstalledProductsRefresh
on WFE1 but it stops and does not finish what it supposed to do (looks like)
PS C:\Users\spadmintest1>
PS C:\Users\spadmintest1> <object type="Microsoft.SharePoint.Administration.SPIn
stallState, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyTo
ken=71e9bce111xxxxxx"><fld type="System.Collections.Generic.List`1[[System.Guid,
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c5xxxxxx
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77xxxxx" nam
e="m_ProductGuids"><sFld type="Guid">beed1f75-c398-4447-aef1-e66xxxxxe</sFld>
<sFld type="Guid">3fdfbcc8-b3e4-xxxxxxxxxsFld><sFld type="Guid">9
26e4e17-087b-47xxxxxxxxxxx</sFld></fld><fld type="System.Collections.Ha
shtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77xxxxxxx
e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" />
<sFld type="String" name="m_LastUpdatedUser">HCDxxxxxxx\spxxxxxx</sFld><sFld t
ype="String" name="m_LastUpdatedProcess">powershell (7964)</sFld><sFld type="Str
ing" name="m_LastUpdatedMachine">xxxxxxxx-SB</sFld><sFld type="DateTime" nam
e="m_LastUpdatedTime">2014-06-13T15:02:36</sFld></object>
I ran the same command on the Admin server and it doesnt seem to do much below.
PS C:\Users\spadmintest1> Set-SPFarmConfig -InstalledProductsRefresh
PS C:\Users\spadmintest1>
What should I do at this point I can try anything before I uninstall and reinstall everything as it would be very painful.
Any help is appreciated.
Thanks and Regards
@R

Yes I followed
http://blogs.msdn.com/b/sowmyancs/archive/2012/08/08/the-license-state-for-the-current-server-doesn-t-match-the-farm-s-license-state-sharepoint-psconfig-error.aspx
And executed
Set-SPFarmConfig –InstalledProductsRefresh
below is the output. It looks like it is stopping in between.
PS C:\Users\spadmintest1>
PS C:\Users\spadmintest1> <object type="Microsoft.SharePoint.Administration.SPIn
stallState, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyTo
ken=71e9bce111xxxxxx"><fld type="System.Collections.Generic.List`1[[System.Guid,
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c5xxxxxx
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77xxxxx" nam
e="m_ProductGuids"><sFld type="Guid">beed1f75-c398-4447-aef1-e66xxxxxe</sFld>
< sFld type="Guid">3fdfbcc8-b3e4-xxxxxxxxxsFld><sFld type="Guid">9
26e4e17-087b-47xxxxxxxxxxx</sFld></fld><fld type="System.Collections.Ha
shtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77xxxxxxx
e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" />
< sFld type="String" name="m_LastUpdatedUser">HCDxxxxxxx\spxxxxxx</sFld><sFld t
ype="String" name="m_LastUpdatedProcess">powershell (7964)</sFld><sFld type="Str
ing" name="m_LastUpdatedMachine">xxxxxxxx-SB</sFld><sFld type="DateTime" nam
e="m_LastUpdatedTime">2014-06-13T15:02:36</sFld></object>
So I executed the same command on Admin server and below is the output. It looks like its not doing much
PS C:\Users\spadmintest1> Set-SPFarmConfig -InstalledProductsRefresh
PS C:\Users\spadmintest1>
@R

Issue with Upload wizard in APEX 4.2

Similar Messages

Maybe you are looking for