Ssh not connect

hi,
I disabled all services inetd.conf, and after boot of the machine, I do not obtain to nter in machine way ssh.
asks for the password but I do not have access to prompt. what it happens?
thanks,
Claudemir.

Also, please tell us with which account you're trying to log in.
'Cause, if you're trying to login as root through SSH it may have been restricted on a number of locations.

Similar Messages

SSH Not Connecting - Times Out

Hi everyone. I'm back on Arch after a few year hiatus.
I'm trying to SSH into my ARM based Arch linux install.
SSHing from the local network works fine. No problems.
When I try to SSH from outside the network, it doesn't connect and times out.
I've created port.conf under /etc/systemd/system/sshd.socket.d/ which reads
[Socket]
# Disable default port
ListenStream=
# Set new port
ListenStream=2222
I have systemd.socket service running as confirmed by systemctl
I have port forwarded port 2222 TCP\UDP on my modem to the computer's IP on the network.
Running
sudo tcpdump -lnn -i eth0 port 2222
reads a lot of information. Specifically, I've tracked down the IP address that I'm trying to connect from and it reads:
21:53:37.234872 IP 172.56.16.239.25065 > 192.168.1.195.2222: Flags [S], seq 1661893998, win 65535, options [mss 1400,nop,wscale 4,nop,nop,TS val 25806051 ecr 0,sackOK,eol], length 0
Would anybody have an idea what the problem could be here?

leberyo wrote:
It's giving:
23:22:41.322847 IP 192.168.1.195.2876 > 172.56.16.239.30117: Flags [S.], seq 2567835032, ack 1441387547, win 28960, options [mss 1460,sackOK,TS val 10693 ecr 27470940,nop,wscale 7], length 0
ok, that is the SYN-ACK, next must be the ACK from source 172.56.16.239
if your your outside IP-address has always 172.56.16.239, you can use
tcpdump -i eth0 host 172.56.16.239
to have the full traffic for this IP-address
The curious thing is that it responds from a different IP; 192.168.1.195. Is that normal? The server is actually on 192.168.1.193. That's the address I'm using to ssh;
ssh -p **** *@192.168.1.193
To avoid confusion, I just changed the ssh port to 2876 which is why it's responding with that port instead of the original 2222 that I put in when I started this thread.
No that is NOT normal, there must be an address translation somewhere; maybe the routing device between your client (172.56.16.239) and your server; this could be the problem; that the address translation is not statefull; intended to mean your client gets answers (SYN-ACK) with server ip 192.168.1.195 as source, which it just drops. Then you would see in the server-tcpdump, only repeated SYN->SYN-ACKs
Could you also tcpdump on your client side ?
EDIT: Is there a reason for using sshd.socket and not sshd.service ? I've no experiences with this socket ... - maybe I'm wrong with my suggestions
Last edited by midixinga (2014-08-19 11:08:04)

Terminal SSH not connecting?

Forgive me if this isn't the best place for this question, but it's mostly Greek to me. I've been able to log into my remote server using the "ssh [email protected]" command from Terminal. Within moments I get the "password" prompt and all is well.
Recently, something is choking and I have no clue where to start looking. I type the ssh command and nothing happens for a minute or two, and then there's the message "Connection closed by nn.nnn.nnn.nnn" (the IP address). Blammo.
The verbose log follows. Any clues? Thanks to all in advance.
==========
Last login: Fri Feb 22 21:31:00 on ttyp1
Welcome to Darwin!
[MyComputer:~] shortname% ssh [email protected] -v
OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to domain.com [nn.nnn.nnn.nnn] port 22.
debug1: Connection established.
debug1: identity file /Users/shortname/.ssh/identity type -1
debug1: identity file /Users/shortname/.ssh/id_rsa type -1
debug1: identity file /Users/shortname/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.5p1 FreeBSD-20030924
debug1: match: OpenSSH_3.5p1 FreeBSD-20030924 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.5
debug1: Miscellaneous failure
No credentials cache found
debug1: Miscellaneous failure
No credentials cache found
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host 'domain.com' is known and matches the DSA host key.
debug1: Found key in /Users/shortname/.ssh/known_hosts:2
debug1: sshdssverify: signature correct
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug1: SSH2MSG_SERVICEACCEPT received
Connection closed by nn.nnn.nnn.nnn
[MyComputer:~] shortname%

Tried that, it asked me to establish the authenticity of the host, I said yes, it added the domain to the list of known hosts - and then nothing again. Got the "connection closed by the host" message after a minute or two.
I tried something different, and sent "ssh [email protected]" (where 'othername' is a site owned by a friend) and it promptly asked for the password (which I don't know so I logged off Terminal). Is it possible the hangup is at my host? I can access all the features of my site normally - I just can't log in via ssh via either root or ftp.

Can not connect to a remote SSH server with my mac

Ok have tried 4 different applications, fetch , captain ftp, terminal, etc.
I am trying and connect to a friends ssh server to upload some file logs. I have the correct login/password, have tried both protocol 1 and 2. Port 22 is correct. I keep getting the error message
User logging error - captain ftp
SFTP connection to ..... could not be opened becasue the connection to the SFTP server could not be established or was lost - Fetch
sshexchangeidentification: Connection closed by remote host - Ternminal
We have tested it using Telnet and other programs on a PC and all is well.
When i try and connect he receives the message
Refused connect from cpe-"ip address"(ip address)
policy: HostKey/etc/ssh/sshhost_rsakey
Do i have a setting somewhere i am missing.

1st, is the server behind a home router? Has port 22 been "Port Forwarded" from the internet side to the server's side of the router?
2nd, from a Terminal session use the command:
ssh -v -v -v [email protected]
The -v -v -v triplets will give you a wealth of ssh connection information. If you read through this carefully you may find the root cause of your problems (assuming the 1st step above doesn't yield results).
Another thing to consider, is that ssh will not make a connection to an account that it does not consider to be reasonably secure. This means that the home directory of the account and specific key subdirectories must have proper ownership and permissions, or ssh will not connect. The specific ownership and permissions needed and the files and directories checked are spelled out in the ssh man page
man ssh

Solaris 9 remote login (ssh) drops connection

Hello All,
I wonder if you can help me...
Let me give you some set-up details before I ask you the question.
I have Ultra-60 at home with Solaris 9 and recommended patch cluster installed. The machine is connected to a Linksys WAG54G ADSL router/modem through RJ45 ethernet cable. The router also has windows XP machine connected through RJ45 ethernet cable. I also have another windows XP machine that connects to the router over wireless connection.
I have opened up required ports on the router/port forwarding so that I can access the services remotely. I was first using default ports for http and ssh, but have now changed them to different ports - to be a bit more secure.
I have created a domain name through dyndns.org.
I have ssh running on the solaris 9 machine and has all the remote commands (rlogin, rsh, telnet) commented out in the /etc/inetd.conf and hence are not running on the machine.
I have a UK ADSL servise provider called Pipex.
Now lets get to the problem:
The whole purpose of the above set-up is that I want to access sun machine from work. The whole set-up works perfectly well - for a little while and then something strange happens. At work, when I connect to the sun machine, everything works fine and when I leave the session idle for 15-20 minutes (could be less time), the connection drops and then I can not connect to the machine for good couple of hours. When I say connection drops, I do not mean that system displays a logout message or something - There is no response from the server - pressing of return key does not do anything and eventually I get a message on windows pop up that connection is disconnected. If I try to retry, the client tries for a while and then says that connection timed out. Same thing happens if I use the IP address � I use the right IP address as someone at home checks the router to confirms the correct IP address. This eliminates problem with domain name.
I have tried everything and can not work out what is causing this problem - the machine has all the 9_recommended patches. To narrow the problem down, I set up apache server on the sun machine. Today, when the connection dropped, I tried to connecting to the apache server and it failed - 'page can not be displayed' message on the internet explorer. However, after couple of minutes, I managed to get to the website but still can not get login prompt through ssh client.
What does that mean? Does it mean that server is playing up, or is it the sshd or is there any time out option in solaris 9... the strange thing is that I can access the web page - though it was not accessible at start when connection to ssh dropped out.
Could it be the router? The linksys do not come with a rule based firewall... so there is nothing that states that disconnects after some inactivity. The port forwarding is working as I do get to login to the server and to the web server. It can not be changing the default port numbers as the problem was there when there were standard ports being used.
It is not the link at my office as my friend, in a different company gets the same problem on my machine � connects to it and after some in-activity, the connection drops and then he can not login for a long time.
It can not be the ADSL link as people at home can use the internet without any problem and they can access the sun machine locally.
It can not be the windows machines connected to the router as problem is there when windows machines are switched off � don�t know if windows would cause this, but just wanted to eliminate anything that I could think of.
One strange think that I did see yesterday was that, when I managed to login the last command showed that I was logged in throughout the time � the time when I could not logged in . The error message in the /var/adm/messages stated something like socket error and connection reset by peer or something � can not give you exact message right now as I can not login to the machine. The time on the message was couple of couple of minutes before I managed to login again and that time was the same as the time showed in last command is my logout time.
Does anyone know what is causing all this problem? Any pointers or help will be appreciated. If there is any place else that you think I can get the answer, please kindly let me know.

Thanks...
A few new developments....
- I opened 2 sessions to the server, left one with no activity and in the other session, I ran iostat 1... The session with no activity got dropped and iostat one carried on... When the session dropped, I managed to login straight away... so no delay of couple of hours. May be because iostat was still running?
- I now have an ftp server running on windows and I can access it even when connection drops out... right now I have no access to sun... but ftp server is running fine.
- I enable remote router access and I can access that as well...
- I enabled telnet and I can not access the sun with telnet either.
So, its either solaris 9 or the router.
Tomorrow, I will connect an another sun machine and then see if connection to both is dropped or just one. If it is to both then it must be router as the way ssh, telnet work is different to the way ftp work - as someone told me this today... so if other sun machine is not accessable then its not sol9 but router. The other machine has Sol 2.5.1 running.
Some one said that it could be that router is running out of translation table entries - but with so few connections? Or it could be that when there is no activity, router thinks that connection should be dropped - there is no open in the router setup which states that... Or Solaris has some timeout feature?
More later.
Kind Regards
Ahmerin

Applications think I'm not connected to internet, yet I am

I'm going crazy here. I have been using Mac OSX for a few years with no problems. Yesterday, after using the httpmail plugin for 2 years to read my hotmail in Mail app, it stopped working. Today, while I am connected to the internet via an ethernet connection and able to read the web and ssh without any problems, I cannot use either Speed Download or Software Update. Both apps think that I am not connected to the internet. Can anybody tell me how I can be online, yet some applications think that I am not?
Thanks, Tricia
Powerbook G4 800Mhz Mac OS X (10.3.9)

Turned out I had a web proxy box ticked in the Network/Proxies settings. Not sure how this happened, but unticking it solved all problems.

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Server Admin not connecting to Leopard Server when accessing via VPN

Hi everyone,
Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

Hi,
When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
Thanks,
Vinayak

Hi Ram,
we checked with network team and port 22 is open and they are able to ping to the target system.
we checked the seeburger logs and we see EOF received from remote site error:
Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
#at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source)
Thanks,
Vinayak.

"You are not connected to the internet" message

Until this morning, Safari worked pretty much ok. Now, when I launch it, I get the "you are not connected to the internet" page. Firefox and email work fine and network diagnostics verifies a proper connection. I can't even get to "software update."

I have the same problem; if I leave the computer on long enough (usually asleep overnight), when I wake it up, Safari will present the "You are not connected to the Internet" message for any page, and Mail will display the exclamation-point-in-a-triangle for all accounts that says it's offline. Yes, Software Update also complains of a "network problem."
Meanwhile, Firefox or SSH sessions via Terminal will work fine, and both network diagnostics and System Preferences claim that the machine is, indeed, connected just fine with an IP lease and everything. This is over a wired Ethernet connection, and, yes, I've tried swapping the cable between the Mac Pro's two jacks.
I'm a long-time Mac user. I've fixed disk permissions; I've flushed Safari's cache; I've done everything described here. Rebooting always fixes the problem -- but it then recurs when the machine has sat or slept for long enough.
Since Safari and Mail are both affected, while Firefox and shell connections are not, it seems fairly clear it must be a bug in some part of the OS relating to both those Internet products. It doesn't cripple the machine, but it's definitely inconvenient, which is not what I expect from Apple products.

Switcher found "You are not connected to the Internet" message confusing

While demonstrating to my brother - a long-time Windows user - that an iMac solved all the problems with Windows XP that he is constantly complaining about to me, he saw Safari's "You are not connected to the Internet" message when the web server for the page didn't respond very quickly. (There wasn't any network problem, or anything wrong with Safari. MacOS or the iMac.) Clicking the 'Reload current page' button brought the web page up. He was angry, saying that the iMac was clearly connected to the Internet as he'd seen me plug in the network cable! He's using this as one of his reasons that "PCs are superior to Macs"!
While I think this is probably a bit of "I don't want to admit that I've been wrong" coming from him (his Windows system has been riddled with malware several times, despite him having kept up to date with Windows updates, using the Windows firewall, a broadband router with firewall, and having tried several anti-virus suites!), I must admit that he has a (limited!) point.
Couldn't the developers cause Safari to display the message "The web page you have requested is not immediately available, still trying - please wait." instead and then, if the web page cannot be displayed after (say) three minutes, and some kind of autromatic diagnostics show that the system still has a network connection, the message "That web page is apparently not available." Only if behind-the-scenes diagnostics show that the Mac has lost its network connection should one ever see the "You are not connected to the Internet" message, in my opinion.
MacBook 1 etc Mac OS X (10.4.8)

I have the same problem; if I leave the computer on long enough (usually asleep overnight), when I wake it up, Safari will present the "You are not connected to the Internet" message for any page, and Mail will display the exclamation-point-in-a-triangle for all accounts that says it's offline. Yes, Software Update also complains of a "network problem."
Meanwhile, Firefox or SSH sessions via Terminal will work fine, and both network diagnostics and System Preferences claim that the machine is, indeed, connected just fine with an IP lease and everything. This is over a wired Ethernet connection, and, yes, I've tried swapping the cable between the Mac Pro's two jacks.
I'm a long-time Mac user. I've fixed disk permissions; I've flushed Safari's cache; I've done everything described here. Rebooting always fixes the problem -- but it then recurs when the machine has sat or slept for long enough.
Since Safari and Mail are both affected, while Firefox and shell connections are not, it seems fairly clear it must be a bug in some part of the OS relating to both those Internet products. It doesn't cripple the machine, but it's definitely inconvenient, which is not what I expect from Apple products.

Transactions report "Could not connect to daemon"

Currently evaluationg ZLM 66, and am running into a problem with
transactions. All appropriate modules are installed on client, and rcd is
running correctly (as far as I can tell). Client activated to my ZLM server
just fine, so I know communication from the client to the server is okay.
After my first couple of test transactions to this client failed with the
error "could not connect to daemon", I thought maybe there were some
firewall issues. Completely disabled firewall on the client, and same
results. The ZLM server can ping, ssh, etc to the client, so I know general
network connectivity is good.
ZLM indicates it communicated with the client in between some of my failed
transactions, which makes again makes me think it's not a network
connectivity issue.
Has anyone else seen this problem?

Most likely the rcd deamon on the client server is not running.
I had a simmilar issue- basically I had to restart rcd about seven times
while updating one of my boxes.
/etc/init.d/rcd start solved (well, sort of) my problem. Not very
helpfull unless you are manually updating and constantly whatching the
action.
> Currently evaluationg ZLM 66, and am running into a problem with
> transactions. All appropriate modules are installed on client, and rcd
is
> running correctly (as far as I can tell). Client activated to my ZLM
server
> just fine, so I know communication from the client to the server is
okay.
>
> After my first couple of test transactions to this client failed with the
> error "could not connect to daemon", I thought maybe there were some
> firewall issues. Completely disabled firewall on the client, and same
> results. The ZLM server can ping, ssh, etc to the client, so I know
general
> network connectivity is good.
>
> ZLM indicates it communicated with the client in between some of my
failed
> transactions, which makes again makes me think it's not a network
> connectivity issue.
>
> Has anyone else seen this problem?
>
>

Drop DB control, error: Could not connect to SYS, ORA-12541

Hi All,
I am new to Oracle. I am struggling to solve this problem for 2 days, but still couldn't get it done. I post my problem here and wish every guru in this forum to offer some help. Any suggestions are greatly appreciated.
I have Oracle 10.2.0.3.0 installed on GNU/Linux. There are several instances there. The database, listener, sql/plus all work fine. Yesterday, I installed 10g database control on server. The information showed that dbconsole created successfuly. However, I use the produced url (http:// xxx(hostname):1158/em)in my local machine (Win XP) to connect the databse, and the webpage opened. The information showed that EM couldn't be connected to database, and the status of Listener is unavailable, the inforamtion for agent connect.. is: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I googled lots of posts both in this forum and internet and tried to make some changes, but the things get worse. It still didn't work. Even i failed to drop the DB control with the command of emca -config dbcontrol db -repos recreate. the error log information in cfgtoollogs/emca is:
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=svv.X.XXX.net)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ORCL3))): ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I understand it's the problem related to listener, but i have no idea how to verify it. I put the tns.ora and listener.ora here.
tnsnames.ora:
xxxxx
ORCL3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.149.210)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL3)
listener.ora
LISTENER =
(ADDRESS_LIST=
     (ADDRESS=(PROTOCOL=tcp)(HOST=10.3.149.210)(PORT=1521)))
SID_LIST_LISTENER=
(SID_DESC=
(GLOBAL_DBNAME=ORCL2)
(SID_NAME=ORCL2)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
(SID_DESC=
(GLOBAL_DBNAME=ORCL3)
(SID_NAME=ORCL3)
(ORACLE_HOME=/opt/app/oracle/product/10.2)
The above is the problem description, any suggestion and help are greatly appreciated.
Thanks,
Kind regards,
Ian

I use the "emca -config dbcontrol db" to config the DB control, but failed. The following is the log information:
This forum doesn't support attch the file. I paste the log file here.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to GMT
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://svv-node2-pub.swlab.net:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Stopped.
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface isInView
CONFIG: IN_VIEW marker not instantiated in /opt/app/oracle/product/10.2/sysman/config/emca.properties
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/opt/app/oracle/product/10.2/jlib/emca.jar:/opt/app/oracle/product/10.2/jlib/srvm.jar:/opt/app/oracle/product/10.2/jlib/srvmasm.jar:/opt/app/oracle/product/10.2/jlib/emConfigInstall.jar:/opt/app/oracle/product/10.2/jlib/ldapjclnt10.jar:/opt/app/oracle/product/10.2/jlib/ldap.jar:/opt/app/oracle/product/10.2/jlib/share.jar:/opt/app/oracle/product/10.2/jlib/srvmhas.jar:/opt/app/oracle/product/10.2/jlib/netcfg.jar:/opt/app/oracle/product/10.2/lib/xmlparserv2.jar:/opt/app/oracle/product/10.2/assistants/jlib/assistantsCommon.jar:/opt/app/oracle/product/10.2/sysman/jlib/emCORE.jar:/opt/app/oracle/product/10.2/oui/jlib/OraInstaller.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereq.jar:/opt/app/oracle/product/10.2/inventory/prereqs/oui/OraPrereqChecks.jar:/opt/app/oracle/product/10.2/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, EMDROOT=/opt/app/oracle/product/10.2, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=svv-node2-pub.swlab.net, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib:null, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, NLS_LANG=AMERICAN_AMERICA.AL32UTF8, ORACLE_BASE=/opt/app/oracle, ORACLE_HOME=/opt/app/oracle/product/10.2, ORACLE_SID=ORCL3, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/opt/app/oracle/product/10.2/bin, PERL5LIB=/opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin:, PWD=/opt/app/oracle/product/10.2/bin, QTDIR=/usr/lib/qt-3.3, SHELL=/bin/bash, SHLIB_PATH=/opt/app/oracle/product/10.2/lib32:/opt/app/oracle/product/10.2/lib:/opt/app/oracle/product/10.2/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, SSH_CLIENT=::ffff:10.3.22.61 4146 22, SSH_CONNECTION=::ffff:10.3.22.61 4146 ::ffff:10.3.149.210 22, SSH_TTY=/dev/pts/4, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/opt/app/oracle/product/10.2/jdk/jre/bin/java]
Feb 12, 2009 4:39:18 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/db/sgastop.pl stop ORCL3 svv-node2-pub.swlab.net 1521 /opt/app/oracle/product/10.2 completed successfully
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: nmccollector process does not exist
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.DBControlUtil stopNmccollector
CONFIG: Successfully stopped nmc-collector process
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
     at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:538)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:217)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: ORCL3, oracleHome: /opt/app/oracle/product/10.2, and user: SYS
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking mgmt view user account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: view user sql: declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of -1
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Connecting to database ORCL3 in home /opt/app/oracle/product/10.2 with user "SYS" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Couldn't execute statement: ORA-06550: line 1, column 144:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 144:
PL/SQL: Statement ignored
ORA-06550: line 1, column 470:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 470:
PL/SQL: Statement ignored
ORA-06550: line 1, column 527:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 527:
PL/SQL: Statement ignored (DBD ERROR: error possibly near <*> indicator at char 143 in 'declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := :p1; <*>sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;') at /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl line 108, <STDIN> line 2.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Error executing /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil /opt/app/oracle/product/10.2/perl/lib:/opt/app/oracle/product/10.2/perl/lib/site_perl:/opt/app/oracle/product/10.2/sysman/admin/scripts:/opt/app/oracle/product/10.2/bin: /opt/app/oracle/product/10.2/perl/bin/perl /opt/app/oracle/product/10.2/sysman/admin/scripts/emca/emcaDbUtil.pl /opt/app/oracle/product/10.2 ORCL3 SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Failed to unlock mgmt_view account
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/app/oracle/product/10.2/cfgtoollogs/emca/ORCL3/emca_2009-02-12_04-38-34-PM.log for more details.
Feb 12, 2009 4:39:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:253)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:133)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Edited by: Ian123 on Feb 12, 2009 2:08 PM

Lauch_msg() socket is not connected

I installed Lion Server in my Macmini early 2009 and after a while of use when I boot the system it stays stuck at the gray boot screen.
If I boot verbose the system last message is lauch_msg() socket is not connected and it remains at it.
That's the second time this happens. At first time I reinstalled the system using the recover partition and it worked till I rebooted it.
Is there a solution to this problem ? Is it a known problem of Lion Server ? I would like to found a different solution than reinstall the system again.
Regards,
Anderson

I am having the same issue on a 2009 Unibody MacBook. Attempts to boot 10.7 Lion Server hang after
net.inet6.ip6.fw.enable: 1 -> 0
BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory
launch_msg(): Socket is not connected
DNSServiceRegister("afpovertcp"): -65563
DNSServiceRegister("afpovertcp"): -65563
DNSServiceRegister("odproxy"): -65563
DNSServiceRegister("odproxy"): -65563
DNSServiceRegister("rfb"): -65563
DNSServiceRegister("rfb"): -65563
DNSServiceRegister("smb"): -65563
DNSServiceRegister("smb"): -65563
DNSServiceRegister("ssh"): -65563
DNSServiceRegister("sftp-ssh"): -65563
DNSServiceRegister("ssh"): -65563
DNSServiceRegister("sftp-ssh"): -65563
launch_msg(): Socket is not connected
This is the second time I've reinstalled. These are normal App Store clean installs on newly formatted hard drives with no additional software or drivers running.
I have another partition that has 10.7 Lion without Server on the same hard drive in the same computer and it without problems. I appreciate any feedback.

HT3964 socket is not connected

My Macbook pro would not boot,
the Launch Msg says (Socket is not Connected).
Pls anyone, do help out with steps to get it back on track.
thanks...

Wild guess. Is there an ssh-agent running under the username you are logging into?
I know that in Leopard when you interactively login, you get an ssh-agent created and most likely a socket is used to communicate with it.
So I'm wondering launchd (which I think starts up the sshd) is having problems creating an ssh-agent for the login session.
Again, this is a wild guess.

Ssh not connect

Similar Messages

Maybe you are looking for