SSO2 Error = ERROR: PSE not found in database

Hello Gurus,
Need your help.
In SS02 in the directory below SAPSSO2000.pse is incorrect. This should point to /usr/sap/MQW/DVEBMGS04/sec/SAPSYS.pse and I am not sure how to correct it. Do I need to maintain a profile to do this.
Certificate List
The Certificate List Is Used To Verify the Digital Signature for the Logon Ticket
/usr/sap/MQW/DVEBMGS04/sec/SAPSSO2000.pse
As a remedy, i have created a soft link so it will still point to SAPSYS.pse but I am still having an error below.
Application server PSE:
ID:           CN=MPW
Namespace:
Profiles:     /usr/sap/MQW/DVEBMGS04/sec/SAPSSO2000.pse
OK: file available, length:      4.033
ERROR: PSE not found in database
Can anyone advise me what to do please? Thanks in advance!
Rachelle

Hi,
Is environment variable SECUDIR set ?
Thanks
Sunny

Similar Messages

Error "kdc: Server not found in database" on attempted connections using Network User Credentials

I am rebuilding my system after a recent debacle with Time Machine, which resulted in a complete wiping of my Open Directory contents. At this point, users can log into various computers on the network, when the hosts have been reconnected to the newly formed Open Directory and the trust certificate has been authorized. However, when users attempt to connect to any file share, the Network User Account credentials fail to gain access.
I am running Mac OS X 10.9.4 on all systems. Two mac-mini's are running OS X Server 3.1.2. One of these servers (mavericks1.pediatricheartcenter.org) is the Open Directory. While testing the system, I am using the console on "Mavericks1," so the following discussion involves communication between the two server hosts only.
From Mavericks1, I open the console and attempt to connect to my file server, named fileserver.pediatricheartcenter.org. I clear the console just prior to sending a "registered user" request to "FileServer" to gain access. Careful examination of the console records shows the following:
1. The Network User is authorized with a message "ENC-TS pre-authentication succeeded".
2. Mavericks1 lists a console message that reads "kdc: Server not found in database: krbtgt/[email protected]:no such entry found in hdb"
3. Mavericks1 lists a console message that reads "kdc: Server not found in database: cifs/[email protected]: no such entry found in hdb"
4. The process registers what appears to be a final failure before trying again with "kdc: Failed building TGS-REP to 127.0.0.1:64390"
FileStorage.local does not exist in the DNS, nor does it exist on FileStorage.pediatricheartcenter.org. That (local) host name was removed when the domain host name for filestorage.pediatricheartcenter.org was created.
1. Why does the kerberos process reference a host name that does not exist?
2. What might be causing the failed authentication exchange?
3. What can be done to remedy the issue?

I spent some time on the phone with Apple Support on Friday. Thank you to Linc Davis for providing some insights into the issues.
As a result of the conversation with Apple Support we learned the following, which I will report here for those who might find this page again:
First, OpenDirectories are extremely fragile. Once you have turned on your OpenDirectory, do not do any of the following:
Do NOT change the host name.
Do NOT change the IP address.
If you are going to attempt either of these things, you should make a clone of your drive (not just a TimeMachine backup, a fully bootable clone, just in case).
Performing these activities (particularly the changing of the host name) will "break" your open directory, and the only way to rebuild the open directory is first to fully destroy the original. Several services are also destroyed when OpenDirectory is broken, the most notable is Profile Manager.
DESTROYING OPEN DIRECTORY
To fully destroy OpenDirectory, it is more complex than simply turning off the OpenDirectory and turning it back on again. Perform the following steps:
Install WorkGroup Manager (it is depricated, but Apple still has a version available for use with OS X Mavericks to handle functions that the Server App does not perform like exporting users and groups).
Sign into WorkGroup Manager as the directory administrator (user name defaults to "diradmin" the password is defined on OpenDirectory creation).
Export the Users, Groups, Computers and Computer Groups to the Desktop or another safe location.
Close WorkGroup Manager
Turn off the OpenDirectory in Server App.
Delete the Server App from the Applications folder and put it in the Trash. (This will disable any active services that are marking various files as being currently in use. Don't worry, we will restore it from the Trash when we are done).
In the terminal, run the following command: sudo slapconfig -destroyldapserver
Make a backup of all website files (just in case)
Navigate to the folder /Library/Server and delete the ProfileManager folder. (If you willing to do so, delete the whole Server folder).
After deleting various folders in the /Library/Server directory, restore the Server.app from the Trash.
Run the Server App.
Set the computer's network connection and host name.
Create a new OpenDirectory.
Use WorkGroup Manager to import any exported files from Step 3.
If you deleted the entire Server directory, use the website backup to retrieve the files that comprise your web site(s) and use the Server App to link the file directories to the Web site's domain name(s).
Personal Note: These instructions got me farther than any other tips I had received previously. After following these instructions, I was able to rebuild my Open Directory. During the process of copying files from the old user home folders into the new user home folders, the computer froze and when it rebooted, all the users and groups I had created during the day had disappeared. Rather than trouble-shooting it again, I decided to do a fresh installation.
A NOTE ON HOME FOLDERS
PER APPLE SUPPORT: Do NOT use the default /Users directory for Network users. Apple Support wanted me to rebuild the home directory, but they noted I was not able to do this, because I had used /Users. This folder ("/Users") is a critical component of the OS X system, and will cause additional problems if the folder is destroyed and rebuilt. The directory id and permissions must remain unchanged from the original installation.
For this reason, Server administrators (like yourself) should use File Sharing in the Server App to create a new anchor point for home directories. Create a shared folder. Ensure that it is shared over the protocols that you will be using (AFP, SMB, WebDav), and then after selecting these values, check the box that allows the folder to be used as a home directory at the bottom of this list. This box will be greyed out if the system is not already bound to an OpenDirectory. If you have activated OpenDirectory on the same machine, the machine will operate as if bound to itself, and this field will be active. If the FileShare server is NOT an OpenDirectory master or replica, then bind the machine to an OpenDirectory via the "System Preferences > Users & Groups > Login Options".
If the local area network has FileShares that are enabled for home directory use, the folders will appear in the User Profile editor under the Home Folder list (See image)
In the screenshot above, I have selected a shared directory named "HomeFolders". By using specially defined home folder directory, the server administrator has the option of deleting and modifying the home folder if necessary. Creating a home folder directory in a location other than "/Users" is the recommended best practice by Apple Support.
If you are inserting files into the home folders, you will need to change the owner and the group to the new owners names. I copied files from the old user directories into the new user directories so that the users would have access to their old files. When my OpenDirectory crashed, and all the users were recreated, they were recreated with different system level user id's. The system therefore maintains a memory that the file was owned by the original owner, even though the system administrator has put it in the new user profile's folder. To fix this, do the following:
1. Prior to making the copy, run "ls -al" from the terminal on the new home directory root. You are looking for the default folder owner and default folder group. On my system it was the user name and a group named "staff".
2. When making the copy, do not replace the user folder. Copy the files into the file folder, not over it.
3. After you have moved files into the user's folders, you can use "sudo chown -R [owner]:[group] [homeFolderPath]/*" and "sudo chmod -R 700 [homeFolderPath]/*" (replace the [owner] and [group] portions of these commands with the owners and groups identified by the command in step 1, and replace [homeFolderPath] with a path to the user directory created for the specific user.
For example:
For the user johnnybgood, we might see the following:
1. We run "ls -al" on the newly created home folder and find that the folder /Volumes/HomeFolders/johnnybgood is owned by johnnybgood and the group "staff".
2. We copy or move files from the old locations using commands similar to the following:
       sudo mv /OldFolderLocation/johnnybgood/Documents/* /Volumes/HomeFolders/johnnybgood/Documents
       sudo mv /OldFolderLocation/johnnybgood/Desktop/* /Volumes/HomeFolders/johnnybgood/Desktop
       sudo mv /OldFolderLocation/johnnybgood/Music/* /Volumes/HomeFolders/johnnybgood/Music
       ....etc....
       (notice how we are not just moving the old johnnybgood folder to the new location.)
3. Next, we change the ownership and file permissions:
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Documents
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Documents
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
4. Let the user log in and use the system normally.

I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Brrestore give error termination message not found

Dear all
i have try to restore offline backup to test system bcaz while database upgrade it got crashed it shows error ora-01157 and ora-01110 i have the backup of system
while i am trying to restore the backup it throws error terminated message not found d:\oracle\SID\sapbackup\beojggvh.afd log file incomplete
i used following command
brrestore -b beojggvh.afd -m full -c
i copied backSID.log and beojggvh.afd file from offline backup folder to target system /oracle/sid/sapbackup suggest i went wrong
i am on windows
Regards

Hi,
Share the complete error log file and make sure data file using for restore should be a successful one complete offline backup.In addition share alert_<SID>.log file also.
Regards,
Gaurav

Multisim user error user.ewfg not found

Hello ! I have a problem with Multisim 8: i've installed it as administrator and when i try to launch it as a user (the user name is student) i get this error: student.ewfg not found default.ewfg nor found! i have enabled Full control options and it still doesn't work. It would be great if anyone can help me. Thank you

If you logged on the machine with an ‘admin” account Multisim
starts but when logged on with a "user" account, it does not, then
this have to be a permission issue. You need to give everyone full access
to the following folders:
1. Multisim user
2. Database
Double check mscomp_s.prd inside the database folder, the permission you set on
the Database folder does not inherent to this file.
Tien P.
National Instruments

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi. The program is built so a file dialog will pop up and ask for the destination of the file. Eventhough there is a file in the specified directory, an error is returned. Running open file+.vi by itself returns no error with the same file designation. Any clues?

noviceak,
Welcome to the NI Discussion Forums.
I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi). I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file? Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder. You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly. While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
I hope this helps and again, welcome to the community.
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support/
Message Edited by Simon H on 01-18-2007 08:01 PM
Message Edited by Simon H on 01-18-2007 08:03 PM
Attachments:
LV4 File Dialog.png ‏3 KB

11gR2 Install Error, Listener is not up or database service is not registered with it

Hi all,
I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
Here's teh contents of my listener.ora file:
# listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\Damien
Here's the contents of my tsnames.ora:
# tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Here is the last fe lines of my emConfig.log:
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
My Listner status output is here:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                18-JAN-2014 09:27:34
Uptime                    0 days 0 hr. 47 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
Many thanks for any assistance that you give. I'm learning so be gentle...
Damien

SOLVED!
OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
What I did to solve the name resolution problem
1. Opened the
Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
the 'unknown' means that the DB didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
Thanks for all your help Baris, and Ed Steven website.
I know more now than when I started so I'm happy.
Thanks.

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

Hi All,
we are trying to preview the PDF output in the XML Publisher Desktop Application.
We are able to LOAD the data successfully.
But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
We are using the XMLP Desktop application on the Client Machine.(Citrix)
Can anybody help us in this regard?
Thanks,
Sachin.

Hi.
You are posting in the wrong forum.
Please post to the BI Publisher Forum:
BI Publisher

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Error ,Field catalog not found while doing billing with DP90

Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babu

hi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

When ever I reboot my device, I get an error message that says, "runtime error info.plist not found". What is this, how does it effect my ipod and how do I correct this error?

I have an ipod touch 64gb. Lately, I discovered an error message on the lockscreen that says "Runtime Error Info.plist not found". What is this, will it effect my ipod, how does it effect my ipod and how do I correct the error? (I see the error message when I power up my ipod and when I reboot).

Follow this article:
How to restart the Apple Mobile Device Service (AMDS) on Windows

SSO2 Error = ERROR: PSE not found in database

Similar Messages

Maybe you are looking for