SSRS Expression Advise for the Reporting display!!!!!!`

Hi Friends,
I am trying to use below expression but i am not getting
=IIF(Contact.First(Fields!Code.Value)=(Parameters!ConsultantCode.Value),
ConsultantReference.First(Fields!Name_Status.Value,"NONE") My requirement is if my select contact parameter = @Contact_Parameter then display ===Datafiled Status Colum otherwise null . thanks in advance.

Hi,
You can try below ;
=IIF(Fields!Code.Value=Parameters!ConsultantCode.Value,Fields!Name_Status.Value,"NONE")
unable to understand what is ;
Contact.First and ConsultantReference.First
If you really what to use this words then you can try below ;
=IIF(Contact.First(Fields!Code.Value)=Parameters!ConsultantCode.Value,ConsultantReference.First(Fields!Name_Status.Value),"NONE")
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Similar Messages

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Display the total number of rows for the report in OBIEE 11g

Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacne

Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Documentaion for the report in the ALV display

Hi
I am using the function module 'REUSE_ALV_LIST_DISPLAY
' to display the list. I want some options which can display the documentation of the report after ALV displays the list.
Now i am using the documentation (se38) for the report which we can see pressing a button 'i' on the selection screen.
Ramesh

Hi Ramesh,
i use it like this:
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = PROGNAME
I_CALLBACK_PF_STATUS_SET = 'MAIN'
            I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
            IS_VARIANT               = VARIANT
            IS_LAYOUT                = LAYOUT
            IT_FIELDCAT              = FIELDCAT
            IT_SORT                  = SORT
            IT_FILTER                = FILTER
            I_SAVE                   = 'A'
            IT_EVENTS                = EVENTS
            IT_EVENT_EXIT            = EVENT_EXIT
            IS_PRINT                 = PRINT
            I_TABNAME_HEADER         = 'HEADER'
            I_TABNAME_ITEM           = 'BESTAND'
            IS_KEYINFO               = KEYINFO
       TABLES
            T_OUTTAB_HEADER          = HEADER
            T_OUTTAB_ITEM            = BESTAND
       EXCEPTIONS
            PROGRAM_ERROR            = 1
            OTHERS                   = 2.
And this:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
aktueller Satz beider Tabellen lesen, da hierarchisch
READ TABLE HEADER INDEX RS_SELFIELD-TABINDEX.
READ TABLE BESTAND INDEX RS_SELFIELD-TABINDEX.
IF R_UCOMM EQ '&IC1' AND RS_SELFIELD-TABNAME = 'HEADER'.
    IF RS_SELFIELD-FIELDNAME = 'QMNUM'.
      PERFORM IW53    USING HEADER-QMNUM.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'AUFNR' AND HEADER-AUFNR <> SPACE.
      PERFORM CS_AUFTRAG USING HEADER-AUFNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'EQUNR'.
      PERFORM PM_HIER USING HEADER-EQUNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'MATNR'.
      PERFORM MM03 USING HEADER-MATNR.
    ENDIF.
    IF RS_SELFIELD-FIELDNAME = 'SERIALNR'.
      PERFORM IQ03 USING HEADER-MATNR HEADER-SERIALNR.
    ENDIF.
ELSEIF R_UCOMM = '&IC1' AND RS_SELFIELD-TABNAME = 'BESTAND'.
    IF RS_SELFIELD-FIELDNAME = 'OTGRP'.
      PERFORM EXCEL_OBJEKT.
    ENDIF.
ELSEIF R_UCOMM = 'REFR'.
Ausgabe neu einlesen
    RS_SELFIELD-REFRESH = 'X'.
    PERFORM DATEN_EINLESEN.
Programmdokumentation.
ELSEIF R_UCOMM = 'DOKU'.
CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'
EXPORTING
DOKCLASS = 'RE'
DOKNAME = PROGNAME
SHORT_TEXT = 'X'
EXCEPTIONS
CLASS_UNKNOWN = 1
OBJECT_NOT_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I010 WITH 'Keine Dokumentation vorhanden!'.
ENDIF.
ELSEIF R_UCOMM = 'GRAPH'.
    PERFORM GRAPHIK.
ELSE.
    MESSAGE I010 WITH 'Bitte markieren sie eine gültige Tabellenzeile!'.
ENDIF.
ENDFORM.
And it works in the Output-List correct.
Regards, Dieter

Report definition for the report not specified

Hello
I have written the code attached but getting the error "report definition for the report not specified"
string v_report_name = Charts.ReportPermutation.ToString() + Charts.charttype + ".rdlc";
string v_report_server = "http://MANOJ-PC/reportserver";
string v_report_path = @"D:/Anshutech New/AnshutechPlusProjectCosting/AnshuProjMgmtSystem/AnshuProjMgmtSystem/";
this.reportViewer1.LocalReport.ReportEmbeddedResource = "AnshuDataSet." + v_report_name;
this.reportViewer1.ServerReport.ReportServerUrl = new System.Uri(v_report_server);
this.reportViewer1.ServerReport.ReportPath = v_report_path + v_report_name;
this.reportViewer1.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Local;
this.reportViewer1.RefreshReport();
Please help
regards
Manoj Gokhale

Hi kalpesh ,
According to your description, you want to display a report which hasn’t been deployed to report server in ASP.NET MVC app, right?
If so, you can add a ReportViewer control in ASP.NET MVC and utilize ADO.NET to provide the data to display the report. For more information, please refer to this article:
ASP.NET MVC - Handling SSRS reports with ReportViewer – Part I.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

The report displays more than 3000 pages with same content.

Respected Sir
I have a report with form letter layout.
The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
please anyone give a solution to this problem

I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
Why this problem occurs. How can we solve it.
Bye

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

Authorization for the report

Hi
I have made one report, I needed to check the authorization for the report, how to do it.
Eg. One employee is executing the report, he only needed to select his transaction
If somebody from one sales organisation, they only needed to take the data belongs to the sales office.
SELECT-OPTIONS: p_vkorg FOR tvkot-vkorg.
SELECT-OPTIONS: p_pernr FOR pa0001-pernr
for example two selection parameter is displaying. if my employee no is 100, while trying to enter execute the report for 200 employee no. no data should show. like that vkorg filed also should work.
Please let me know how it possible.
Regards
Sebastian John

Hi,
You can change the code below
*---Authorization for Company code entered by the users.
*---This code will restrict users to see data for company
*---codes which they are not authorized to.
*---Select all the company codes based upon selection entered by the
*---user
SELECT bukrs
   FROM t001
   INTO TABLE li_bukrs
WHERE bukrs IN z_bukrs.
IF sy-subrc EQ 0.
*---Clear Screen variable for Company code
   CLEAR z_bukrs.
   REFRESH z_bukrs.
*---Filter and prepare Select options for Company code table to be
*---passed to query. Table will only have values of company codes he is
*---authorized to for display.
   LOOP AT li_bukrs INTO lwa_bukrs.
     AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
                       ID 'BUKRS' FIELD lwa_bukrs
                       ID 'ACTVT' FIELD '03'.
     IF sy-subrc = 0.
       z_bukrs-sign = 'I'.
       z_bukrs-option = 'EQ'.
       z_bukrs-low = lwa_bukrs.
       z_bukrs-high = space.
       APPEND z_bukrs.
     ELSE.
       lv_flag = 'X'.
     ENDIF.
   ENDLOOP.
*---Give warning message to the user in case he is not authorized to see
*---data for all the company codes that he has entered.
   IF lv_flag = 'X'.
     MESSAGE ID 'ZFNG' TYPE 'W' NUMBER '015'.
   ENDIF.
ENDIF.
This code does an authorization check at company code level and removes all the company codes that user has entered but is not authorized to look for. After that we pass the filtered list of company codes for which user is authorized to in the select query and fetch the results. You can first select all the records from database for PERNR and VKORG. Then filter them and prepare new list of VKORG and PERNR after performing authorization check and pass it further to select queries in your program.
KR Jaideep,

The default value as "None" for the report filter which is Value List type?

Hello,
I want to know is it possible to make the default value as "None" for the report filter which is Value List data type?
For example:The Project Classification Value List value type which have many value like "Supplier Rationalization" "Category Sourcing" "Contract Regegotiation" etc, and the value "Supplier Rationalization" is in the frist positon in the value list. When i use "Project Classification " as a report filter, the value "Supplier Rationalization" displayed as default value. And in the value list box in report filter of Project Classification , there is a value "None" which should be added automatically by system. So i manually filled the default value with "None" in Filter Prompt screen, but it does not work. After i display the report ,the Project Classification filter still use the ""Supplier Rationalization" as the default value.
My current ESO version is 5.1. I tried other ESO version like 5.15, if i manaully give a default value "None" in Filter Prompt screen for filter Project Classification, then the default value is "None". It works well.
Does anybody know if it's possible to do the same thing in ESO 5.1?
Thanks & Regards,
David
Edited by: David Gao on Aug 11, 2010 4:06 AM

Hi David -
This is possible, but the technique is not too obvious...
To make "None" be the default choice for a query definition filter parameter of type value list type, you need to set the default value of the filter parameter to the following:
<internal id of value list type>:616:NULL
For example, I believe you will see that the internal id of the Project Classification value list type is 51, so the default value of the filter parameter would be:
51:616:NULL
I hope this helps.
Regards,
Rob

Report S_ALR_87013105 : no authorization for the report/ table 7KU6_001

Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
Vijay

Hi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar

Problem in Getting Count answer for the report in OBIEE 11g..

Hi friends,
I created a report in OBIEE 11g, but i'm not getting the correct answer as i expected...I'm getting answer in presentation services but the answer is wrong..
I'll explain to you with an example report: Suppose in the report "NATIONALITY COUNT IN DEPARTMENT WISE" manner
i dragged the Nationality column from per_all_people_f which is dim table and i dragged the column that i applied aggregation rule "count" for the column "nation count" from per_all_assignments_f which is fact table......If i viewed answers means i'm getting correct answer
(i.e.) nation count per Nationality..........
NATIONALITY<---------------------->NATION COUNT
AUSTRALIA 40
INDIA 20
AFRICA 10
USA 5
The above is the answer I'm getting with out including the department column from hr_all_organization_units...........
But since according to the report i need count in department wise manner, so for that along with nationality and nation count column i dragged department column from hr_all_organization_units which is dim table and also i hide that column as i dont want to view the department column in answers..........
If i clicked answers, means then I'm not getting the nation count for the nationality......... I'm getting the answer 0 for each and every nationality, if i included the hided department column
NATIONALITY<----------------->NATION COUNT
AFRICA 0
AUSTRALIA 0
INDIA 0
USA 0
I'm getting answers like the above if i include the department dimension column which is in hided manner.........................
What is wrong with it........Whether i made any logical mistake for the report.....If so guide me friends..........
Cheers,
Harry...........

Hi,
you said about writing query in DB.......whether U meant of trying checking the query in toad..or something else..........
Since im giving only one join from dim to fact in the physical diagram........
But more than one join exist between those dim and fact, but im giving only one join mainly the primary key column of the dimension table to the fact table....Whether i need to give all the joins that exist(even if it has 2 or 3 joins between those fact and dim) tables....
If i give count distinct means it is giving count for every nation as 1....like i mentioned below
NATIONALITY<----------------------------------------------------->NATION COUNT
INDIA---------------------------------------------------------------------1
AUS------------------------------------------------------------------------1
CAN------------------------------------------------------------------------1
Since you said to check about depts of the particular column....i couldn't able to understand about "depts" that you meant????
Whether i made any logical mistake...........
thanks,
Harry...
Edited by: HariPrasad on Oct 10, 2010 9:55 PM

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

SSRS Expression Advise for the Reporting display!!!!!!`

Similar Messages

Maybe you are looking for