SSRS: Problem with security when we try to sse a report

Hi,
I've two server which have SQL server 2008 R2 and Sharepoint 2010 on win server 2008 R2. We configured SSRS 2010 in integrated mode in sharepoint ( ohh we dont use SSL ).
The First is ok for authentification when i look in the log of SSRS and that work perfectly.
My log for this server looks like :
05/15/2014 19:36:08 - 10.15.154.73 33315 First:8080 GET /ReportServer 401 623 0 1.1 First:8080 - - -
05/15/2014 19:36:08 - 10.15.154.73 33315 First:8080 GET /ReportServer 401 701 0 1.1 First:8080 - - -
05/15/2014 19:36:41 AMM\jsmith 10.15.154.73 33315 First:8080 GET /ReportServer 200 857 33172 1.1 First:8080 - - -
But the Second ( we use the same configuration that the First ) doesn't work . When we look in his log, we saw that no credential passed
05/15/2014 19:07:57 - 10.15.154.73 33315 Second:8080 GET /ReportServer/ 401 702 0 1.1 Second:8080- - -
05/15/2014 19:07:57 - 10.15.154.73 33315 Second:8080 GET /ReportServer/ 401 854 16 1.1 Second:8080- - -
05/15/2014 19:35:09 - ::1 33315 Second:8080 POST /ReportServer/ReportService2010.asmx 401 479 16 1.1 Second:8080- - -
The account that run all ( same for configuration SSRS) is farm admin. We configure this account to use in Shapreoint administration for SSRS and Reporting service Configuration Manager. ( same configuration for the First and Second server ).
Ok, just to eliminate the physical problem, we use WireShark and Telerik on the Second server to see what happens when we try to see a report. And supprise, we see that the credential are passed to server ( we confirmed with a lot of packet ).
So, ours problem is that the Second server received the credential ( side hardware ) but he seems to have a problem with the configuration of the application ( sharepoint, SSRS or other ) .
* Just remember we apply the same configuration on the First and the Second server
Can you help me ?
John

Hi John,
According to your description, my understanding is that you cannot view SSRS report on the second server.
Was there any error when viewing the SSRS report on the second server?
Did you set the same report in the two servers?
Please check if the user has permission to view the SSRS report in the second server.
http://msdn.microsoft.com/en-us/library/bb283182(v=sql.105).aspx
To narrow the issue scope, check if the report which cannot be viewed in the second server can be viewed in the first server and test the other reports in the second server.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Problem with iPad when I try to select a photo from gallery using browseForImage

Hi, this is my first post, and I hope you can help me with this problem...Im using cameraUI.launch for open the camera app and take a picture without problems, this works fine, but when I try to open gallery from iPad using browseForImage this open a little window to select a folder rigth? but when I try to select any folder this cancel all operation and I cant upload any picture from my gallery..please help,,,Im working with FB 4.7 , apache 4.14 and adobe Air 16.0.0.272, on Android devices and iPhones I dont have this problem just on iPad.
this is the source code:
protected function btnGallery_clickHandler(event:MouseEvent):void {
if( CameraRoll.supportsBrowseForImage )
        if(Capabilities.manufacturer.indexOf("Android") >= 0)
          loader = new Loader();
          loader.contentLoaderInfo.addEventListener( Event.COMPLETE, this.contentLoadedHandler );
        cameraRoll = new CameraRoll();
        cameraRoll.addEventListener( MediaEvent.SELECT, imageSelected );
        cameraRoll.addEventListener( Event.CANCEL, browseCanceled ); /*This is activated whenever I try to select a folder to select an image on the iPad*/
        cameraRoll.addEventListener( ErrorEvent.ERROR, mediaError );
        cameraRoll.browseForImage();

I have te same unfortunate problem. Only happens in iPad. cameraRoll.browseForImage() opens a new window but wherever I touch (on folders, or anywhere on the window or out of the window) it dispatches a Cancel event and closes window.
I tried to dispatch flash.events.Event.DEACTIVATE, from nativeStage and from cameraRoll, before and after calling cameraRoll.browseForImage() , but still it was behaving same as above.
I tried setting displayState as:
Starling.current.nativeStage.displayState = StageDisplayState.NORMAL;
But no help neither.
It doesn't show any error, I don't have any other solutions to come up with. I feel that somehow I need to invoke application to deactivate, to let my touches focus on CameraRoll window, but I don't know how to do this actually (I tried to dispatch DEACTIVATE event from various sources but I dont believe it is an effective way of doing it).
I use AIR 16.0 with Starling, test on iOS 8.1.

Can anyone help me with a problem with Safai when I try to go to certain web sites?

When I try to go to some various web sites. a window appears saying "Safari is no longer is responding because of a script on the web page". It will ask me if I want to stop or continue and if I select "Continue", pretty soon it allows me to enter some info but just a word or letter at a time and then the box appears once again. This is very frustrating. Does anyone have any idea what is going on? It is happening more and more. Do I need to do something with my Safari application? My Safari application is a 5.0.6 . This happens for instance when I try to go to Safeway to view their ads or the GE comppany to view appliances and several other sites. Does anyone have any suggestions as to why this is happening?

Hi, I think it's mostly our outdated Javascript for 10.5.8 & below, but...
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Contact lost with server when i try to close a report

Hi
i have a strange issue with Discoverer plus (Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18))
when i run a report and try to close it, by doing file--close--exit
i'm getting an error "contact lost with server".
any thoughts on this pecuiliar error.
thanks.

Hi,
i'm getting an error "contact lost with server"The problem might exists when your server lost the connection so it would say you to again login.Are you using VPN to connect to your client machine for accessing discoverer plus if so it happens with VPN.
Another thing is in discoverer plus if you leave it inactive for longer time without actually working on it and just opened it and minimized the window,then as it is in inactive state the server contact would be lost.
Best Wishes,
Kranthi.

Problem with Query when I try to do more than one group

Hi Sap Experts,
Hopefully somebody can suggest a way to make my query work a bit better. I have built a stock warehouse query which prompt for item groupcode
see below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T0.[ItmsGrpNam] >= (N'[%0]' ) ) AND (T0.[ItmsGrpNam] <= (N'[%1]' ) ) AND (T2.[OnHand] > (0 ) ) ORDER BY T2.[WhsCode]
At the moment this is working fine when I select to and from a group with the same ItemCode- however I now would like to to add 2/3 itemgroupcodes to the same query.
So at the moment if I run this - it promts for the Item Group Code - I enter the to/from itemcode - the query gives me a breakdown of the item group , warehouse location for that item and if there is stock on hand for each location
However I would like to be able to select 3 distinct Item groups but don't see to be able to when I adjust the query - can you add multiple parameter to add the 3 distinct itemgroup codes
If any one could suggest a way to alter the query to allow to choose 3/4 distinct groups either using the [%1] selections or simply built into the query that would be great
thanking you in advance for any suggestions you may have
Paul

Hi Gordan,
I have been playing with the query and the conclusion i have come to is this - this way works selecting one itemgroupcode
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' ))
This query works by it self and selects the Item Group Code that I need to see.
However I can't seem to get it to work If I try to add a further group code? see code below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' )) AND (T1.[ItmsGrpCod] = (N'135' ))
It just seems to fail even though I know there is data for both groups - Have i missed something in the code?
I would like to be able to add 3 further group codes to the query as it will be for a report showing stock on hand once a month in the various locations
Any suggestion as to who to tweak the addtional groups
thanks
Paul

A small problem with painter when i try to use color selector

in paint brush there is this color selector that things that takes drops a dropper i think it's called if i choose it and use it on some part of the pictuer i get this color on paint 1 but i can't use it to change color 2 why is that and what can i do about this?
thanks in advance.

in paint brush there is this color selector that things that takes drops a dropper i think it's called if i choose it and use it on some part of the pictuer i get this color on paint 1 but i can't use it to change color 2 why is that and what can i do about this?
thanks in advance.
Hi
1. Select the Color Picker (Eye Dropper).
2. Click Color 1.
3. Select a color from the Pallette.
4. Select Color 2.
5. Select the second color from the Pallette.
6. Select a Brush from the Brushes drop down.
7. When you use the left Mouse Button, you will get Color 1.
8. When you use the Right Mouse Button, you will get Color 2.
While you are painting, you can select the Color Picker at any time to change either color 1 or 2.
Windows 7 features - Paint - Microsoft Windows
Getting started with Paint
Using Paint
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

The problem is that when I try to update my NI-DAQ drivers from 6.5.1 to version 6.7

I have a Win95 based system running Labview5.1 which utilizes the PCI-6025E board with the BNC-2090. The existing version of NI-DAQ drivers is 6.5.1. The problem is that when I try to update my NI-DAQ drivers to version 6.7 I receive the following errors:
1.The new software goes thru all the installation steps upto the point where it displays the message that it needs to restart to complete the installation.
2. The system then reboots and displays the message," Completed Updating Window Files"
3. Then I receive an error:
'Rgdaqhce' performed an illegal operation and will shut down.
4. The window closes and brings me back my normal Desktop display. The NI setup window appears and displays" Installing: Please Wait".
5. Then it goes thru the NI-DAQ setup normally, choosing the PCI-6025E and the BNC 2090 doc options.
6. WHen it gets to the point of selecting Documenatation PAth, Error: NI-DAQ SETup
Cannot find installation information for :322153.
At this point I just choose OK.
Then it proceeds where it request the Development path, LAbview 5.1 and then it proceeds to copy all the files and then states "Installation Complete" and are ready to configure MEasurement & Automation Sys.
7. The Measurement & Automation window appears:
DATA NEIGHBORHOOD
DEVICES & INTERFACES
SCALES.. WHen I click on any one of the above I get the following message:
" The configuration file has been updated from a previous system. If you save changes to this file it will be permanently upgraded to the current version." At this point I choose "OK"
8. Then it states.."you must reboot for the changes to take effect. Would you like to reboot? YEs or No!". where the Data Neighborhood folder never opened..
9. If you choose YES, the system reboots. If I open Measurement & Automation and click on Data Neighborhood again, I get the same above message as in #8 above. If I choose No at anytime to reboot, I get the following Error:
" Explorer- Illegal operation and it will shut down"
Then Measurement & Automation shuts down and brings me back to my windows desktop.
SO no matter what happens I can never get into Data Neighborhood, it keeps going into this cycle.
So I removed NI-Daq version 6.7 and re-installed version 6.5.1.
What recommendations may you suggest in upgrading from NI-Daq 6.5.1 to 6.7 on this system? I would like to take advantage of NI-DAQ 6.7 new feature where LAbview for Windows Data Acquisition Library LLBs now contain function calls to a dynamic link library called LVDAQ.DLL, where the benefit of changing the VIs to call DLL functions instead of code interface nodes, CINs, where thet VI load time is dramatically improved.
Any help with this matter would be greatly appreciated.
In the meanwhile I am searching your support page here to see if there are any similiar situation..I have not come across any as of yet.
Thanks for your help and sorry for such a long email.

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

Good morning
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3125
Hope this helps
Cheres

Problems with encoding when creating link in mail

A user inputs some text in a field at a webpage.
From this I build a mail that has a link that looks like this:
http://www.domain.com/a/controller/action/?name=[INPUT VALUE]
My problem is that when I try to get the value in the receiving action, using params.name, it does not so good. The real problem is about odd characters like our swedish �,�,� for example.
What I have tried to do when building the link is to use URLEncoder.encode([INPUT VALUE], 'UTF-8') and then using URLDecoder.decode(params.name, 'UTF-8') but it does not work at all. Is there any other way I should attack this problem?

def name = "Mattias Sands�ter";
def email = params.email;
name = URLEncoder.encode(name, 'UTF-8');
println(name)
def message = http://domain.com/a/b/download/?name=" + name
MailSender.sendMail(email, "Subject", message);{code}
{code}def download = {
println(params.name)
println("download after decode" + URLDecoder.decode(params.name, 'UTF-8')){code}
The first println looks fine, it says Mattias+Sands%C3%A4er
The second println looks horrible, Mattias Sands��ter
The third looks the same.
Then I send this to my gsp(jsp) page and wants to put this in a standard textfield, but it of course looks like Mattias Sands��ter there too.
This is on a linux-server, on my local computer, everything works as expected.
Whatever it its, something happens to the name-variable when it is clicked on in the e-mail. It looks good in the e-mail, get pasted in the address-field in the browser correctly, but when retreiving the variable with params.name it is screwed
Edited by: sandsater on Jul 8, 2008 8:44 AM

There is a problem with your mailboxes. Try clicking Quit-

"There is a problem with your mailboxes." "Try clicking Quit and then opening Mail again. If this message reappears, click Quit and Rebuild index. The next time you open Mail, it will import your messages."
This error has become more frequent every day as I use Mail. Luckily, I found through another thread in this Help Discussion Forum that the Avast Security App for Mac has a hard time with large mailboxes in the Mail.app:
http://discussions.apple.com/thread.jspa?messageID=9477497&#9477497
The solution appears to be as simple as un-checking "Mail Support" in the Avast "Preferences…" and the issue will be resolved.

Answered!

HT1338 Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Now I checked the materials that I got from AT&T Yahoo and
port 25 is used as the outgoing mail port, 110 for incoming.
This is for the POP type account provided by AT&T, not necessarily for an email account and SMTP server not provided by AT&T.
Sounds like AT&T blocks using an SMTP server that is outside of their network or not provided by AT&T on Port 25.
Try the following first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work, we will go to plan B.

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the fol

I don't know what I downloaded that caused the problem, but now when I try to make a new folder on the desktop of my new Windows 7 computer, I have only the following choices: Shortcut, Bitmap Image, Contact, Microsoft Word Document, Journal Document, Microsoft Powerpoint Presentation, Text Document, Microsoft Excel Worksheet, and Briefcase. No new folder choice. Anyone have any ideas how I can correct the problem?

This support forum is for Firefox related issues. The volunteers on this forum can only help with Firefox issues.
Please consider contacting another support service like [http://www.ask.com/answers/browse?o=0&l=dir&qsrc=321 Ask.com].
Sorry.

SSRS: Problem with security when we try to sse a report

Similar Messages

Maybe you are looking for