SSRS Variance expression problem. Create a Variance expression. Compare current month with same month from previous year.

Hello,
I am using VS2010 shell. I have a matrix report where I have a row group by Year. Then I have a column group by Month.
When I run the report, I get 2013 data on top of 2014 data. Now I need to create a variance by year for each month.
So in the example below, I need to create an expression that will pull the variance for Oct 01... subtracting 2013 from 2014 for the months. So I need to Subtract 8,222 - 4290. I have no clue.
Here is what my rdl looks like.
Thank you for your help.

Hi Adrian,
If I understand correctly, you want to calculate the difference order between 2013 and 2014 for every month. And there are only two years in the FISCAL_YEAR field.
If in this scenario, we can simply use the following expression to achieve your requirement:
=first(Fields!ORDER.Value)-last(Fields!ORDER.Value)
The following screenshot is for your reference:
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

Problem creating a regular expression

Hi Everyone
I am trying to create a regular expression for validating a password string for the following given rule -
It must contain atleast any two of following 4 classes of characters -
1. lowercase letters.. a - z
2. uppercase letters.. A - Z
3. digits.. 0 - 9
4. Special characters.. !@#$%^&*()/?><
I m having a hard time creating such regular expression. I will really appreciate if someone can help me with this.

[http://google.com/search?q=regular+expression+password+validation+site:forums.sun.com]

Yesterday, as today's deadline for filing tax returns approached, I was paralyzed by the inability to create new IRS PDF forms and to retrieve archived ones from a year ago. My computer went crazy. 24 hours later, I am still paralyzed. Can you help?

My computer went crazy yesterday on two occasions involving PDF documents. One dealt with attachments to an email from a bona fide corporation. The other dealt with IRS PDF forms & schedules needed for today's submission.
As both dealt with PDF and had nothing else in common, I suspected my PC had a virus. When I asked a local store technician, he agreed. I turned to Norton, which protects my PC from viruses, and after a few hours of really thorough searching, the computer was found to have no viruses.
Before describing what I call "crazy" computer behavior, you need to know that I have long had IE8 as my default browser but a few weeks ago switched to Mozilla Firefox because IE8 had beome incompatible with some websites from which I get information.
When I received the email from AT&T email service and clicked the first of four icons representing attachments, there was figuratively an explosion on my monitor: a series of new tabs, each called New Tab, burst onto the monitor--but no text or picture. The new tabs appeared faster than I coul kill them. I finally decided just to shut down the computer, hoping they would not reappear when I restarted. I was wrong. After 2 repeats, I decided to forget about the attachments and asked the sender to send them to me by regular mail.
That was no solution for my IRS PDFs. I wanted to complete filling in the various forms and schedules that I had begun months ago so that I could mail them today to the IRS (without having to copy them all in ink). When I tried to open the first one, BOOM. The same thing happened: the blizzard of New Tabs atop blank pages; my IRS form or schedule did not show up. Did the same shutdown/restart routine with the same results.
When I looked at the list of current forms that had to be completed, I noticed something very strange: the icons that began the listing of the documents' names were replaced one by one by Mozilla icons. When I moused over them, they said Firefox HTML. Why?
Starting the day today, I had the same experience. What's more, when I started to retrieve 2012 IRS PDFs from a year ago, the same New Tab tabs appeared and had to be killed, and Mozilla icons replaced whatever icon was there before.
Assuming that the problem arose with Adobe Reader's reading of the PDFs, I contacted Adobe but got no helpful phone number because PDFs are a free service and was directed to use this Forum to get help.
What do I have to do to (a) read and use PDFs in the normal way and (b) remove the Mozilla icon from those that have appeared on icon documents. If Mozilla is the source of the problem, shall I go back to IE8? (In my 80s, I want eventually to replace my old computer but for the time being I must continue using it. It will not take an IE9. Anther possible default browser would be Google Chrome, but I have unfavorable impressions of it because of its intrusiveness, loading my PC with stuff I do not need.
Can you help?

The problem is absolutely not Reader. The problem is that FireFox has stepped in front of Reader and handles all the PDF stuff - wrongly in your case. FireFox is DESIGNED to take over PDF files. But it is not capable of doing IRS forms!
To start with go back to IE for these forms. When you save them to disk DO NOT DOUBLE CLICK ON THEM until this is fixed. Just open the in the normal way - start Adobe Reader and use Open from the File menu.

Problems creating a Network -- Base Station works fine with Win XP and 7

I just bought the Airport Express and am using it now as a base station and can connect from both my XP and Win 7 based PCs -- can access the internet from anywhere in my home -- wonder of wonders.
I tried setting up a Network but had to go back to the factory settings each time. I basically can leave it at that (no printing from wireless) but that is not a big issue.
What else will I miss by not being able to create a network?
What am I doing wrong?

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problems Creating a Java Class using a webservice with certificate

hi,
i'm developing a java class that call's a webservice that needs a certificate, i'm not used to work with java, last time was 10 years ago, so i'm having some troubles because of the certificate.
I already add the certificate using java control panel > Security > Certificates. When testing i get the following error: IOException (java.io.IOException: subject key, Unknown key spec)
I think I need to define the certificate in my class, but i'm having a lots of trouble with the samples that i found over the internet, nothing works and i'm running out of time.
This is my Class
create or replace and compile java source named "FishInfoAt" as
import java.net.*;
import java.io.*;
import java.security.*;
public class FishInfoAt
     public FishInfoAt()
     public static String send(String urlfishinfoat, String mensagem, String mensagem1, String mensagem2, String mensagem3)
          // Init
          String response = "";
          String msgtotal = mensagem+mensagem1+mensagem2+mensagem3;
          String a = "";
          HttpURLConnection conn = null;
          try{
               URL url = new URL(urlfishinfoat);
               conn = (HttpURLConnection) url.openConnection();
               conn.setRequestMethod("POST");
               conn.setRequestProperty("Content-type", "text/xml; charset=utf-8");
               conn.setRequestProperty("SOAPAction", "https://servicos.portaldasfinancas.gov.pt:401/sgdtws/documentosTransporte/");
               conn.setRequestProperty("Content-Length","" + msgtotal.length());
               conn.setDoOutput(true);
               conn.setDoInput(true);
               conn.connect();
               OutputStream out = conn.getOutputStream();
               out.write(msgtotal.getBytes());
               out.flush();
               InputStream in = conn.getInputStream();
               int value;
               while( (value = in.read()) != -1)
                    response+=(char)value;
          catch(Exception e)
response = ("*** ERROR - IOException (" + e.getMessage() + a + ")");
return response;
/

Hi Deepak,
Could you please let us know upto which line your code is going safe. Try printing the value in the structure before you send that to the method GetUGEntity().
I am not too sure that would be a problem. But I have faced a problem like this, wherein I tried to access a structure for which I have not allocated memory and hence got exception because of that.
Since your JNI code seems to be error free, I got doubt on your C part. Sorry.
Dhamo.

Problem create DataGrid on the new browser tab with

Hello.I work Flex 3 Web application .I have a problem with about create new browser tab.So that I want to create DataGrid(with data) on the new browser tab.

Use JavaScript to do this pointing to your DataGrid application and pass some parameters.

Creating Keyboard shortcut for two different actions with same menu name..

Am using soundforge pro .. I have to process nearly 1000 audio files, and want to create shortcuts for "Smooth"
The problem is there are two Menu names named "Smooth"
Fade In > Smooth
Fade Out > Smooth
I want to assign different shortcuts for each one.. Is it possible ?
Any help is appreciated

Hi,
I would use IP Address range boundaries instead which I normally do anyway instead for the AD site.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to create java classes when multiple xsd files with same root element

Hi,
I got below error
12/08/09 16:26:38 BST: [ERROR] Error while parsing schema(s).Location []. 'resultClass' is already defined
12/08/09 16:26:38 BST: [ERROR] Error while parsing schema(s).Location []. (related to above error) the first definition appears here
12/08/09 16:26:38 BST: Build errors for viafrance; org.apache.maven.lifecycle.LifecycleExecutionException: Internal error in the plugin manager executing goal 'org.jvnet.jaxb2.maven2:maven-jaxb2-plugin:0.7.1:generate': Mojo execution failed.
I tried genarate java classes from multiple xsd files, but getting above error, here in .xsd file i have the <xe: element="resultClass"> in all .xsd files.
So I removed all .xsd files accept one, now genarated java classes correctly. but i want to genarte the java classes with diffrent names with out changing .xsd
Can you please tell me any one how to resolve this one......
regards
prasad.nadendla

Gregory:
If you want to upload several Java classes in one script the solution is .sql file, for example:
set define ?
create or replace and compile java source named "my.Sleep" as
package my;
import java.lang.Thread;
public class Sleep {
public static void main(String []args) throws java.lang.InterruptedException {
if (args != null && args.length>0) {
int s = Integer.parseInt(args[0]);
Thread.sleep(s*1000);
} else
Thread.sleep(1000);
create or replace and compile java source named "my.App" as
package my;
public class App {
public static void main(String []args) throws java.lang.InterruptedException {
System.out.println(args[0]);
exit
Then the .sql file can be parsed using the SQLPlus, JDeveloper or SQLDeveloper tools.
HTH, Marcelo.

T61p back from depot after 1 month with same problems, phone support no help

I ordered this on Feb 8. My CC was billed March 5th which is around when I physically got it. I basically troubleshooted it until the end of the month before calling to get it sent for repairs. Got the box for the depot on April 3 and sent it the same day. Got the laptop back just on Monday May 12. Now it still doesn't work, and I'm wondering what the heck to do.
Problems with the T61p:
1. Cardbus non functional; The pci/cardbus bridge is detected fine and drivers not a problem. The system doesn't detect any card inserted in the T61p. I have a $100 firewire 800 card I've used without problems in many laptops (I can test in one right now), but this T61p doesn't see it at all. This is not a driver issue for any particular card, but the fact that windows doesn't detect any new hardware when a card is inserted.
Sent to the depot at the beginning of April and I got it back this Monday. They replaced the mainboard and pcmcia slot (as it says on the slip included). Still having the exact same problem.
2. Completely unstable with a 1394b expresscard; Since I cannot get the cardbus slot to work, my only option is an expresscard. I am using a studio quality sound interface, Fireface 800 from RME. This is a great piece of hardware that works flawlessly on my 5 year old AMD box. However, on the T61p if I playback audio through it, connected via a SIIG firewire 800 expresscard (high quality, and one of the _only_ 1394b expresscards out there) the system completely locks up in a matter of minutes.
The main reason for this laptop purchase was for music production with the RME Fireface. It is 100% the T61p causing the problem, not power management issues, driver issues, the SIIG card, or physical connections, etc. You can see my thread at RME from March when I was trying to figure this out:
http://rme-audio.de/forum/viewtopic.php?pid=11332
I haven't had a full month of use of this thing. I would very much just like a return at this point. I don't want to wait another month for a depot repair, seeing as the last one didn't resolve anything. If I could get a fully working model of this T61p that would be great, but I see this 14.1" SXGA+ isn't even offered anymore.
Talking to support is horrible. Last I talked to someone who was technically clueless, saying he would do research and call me back. I call back the next day and there isn't even a record of me talking to anyone...
Anyone have any advice? I'm coming to the forums because I'm just stuck here with a laptop I can't use, and don't know what to do with...
EDIT/update:
I managed to get this number finally (1-866-968-4465) and talked to someone who seemed to actually care. So I've gotten somewhere, I guess the forum post doesn't help much. I'll update the result anyway...
Message Edited by trancer on 05-16-2008 01:46 PM

Mine is the siig NN-EC2812-S1 2-port FireWire 800 ExpressCard/54 and the carbus card is a StarTech.com CB1394B3
Where do you read about chipset compatability probs with siig cards? What would be a better card?
Edit:
I could get one of these within a day or so:
belkin F5U514 $98 CAN
startech EC1394B2 $119 CAN
sonnet FW800-E34 $98 CAN
Know which would be better to try?
Message Edited by trancer on 05-16-2008 03:06 PM
Message Edited by trancer on 05-16-2008 03:07 PM
Message Edited by trancer on 05-16-2008 03:10 PM

How to create a Debit Memo Request in backend with same behavior to DP91

There is a special requirement for creating a DMR in backend. Is there any BAPI or function can create a DMR? Please kindly help me. Thanks a lot!

Hi
Refer the link below
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMSD/CAGTFADMSD.pdf.">BUS2096</a>

Problem creating deployment weblogic 5.1

I have weblogic 5.1 running on Win2K. I can start it up without
problems when the deployment part is commented out.
The jdbc connection seems to be working with a Oracle 8.1.7
running on the same Win2K box.
When I try to deploy some EJBs I get this error on startup:
<error>
Thu Nov 07 12:59:31 CST 2002:<E> <EJB> Could not deploy:
'C:\apps\web\weblogic\mycluster\lib\ErfpLibrary.jar': file is not a
valid jar file, or does not contain a valid bean
</error>
here's the full error output:
Any ideas on what's missing here?
<full_output>
Thu Nov 07 12:59:31 CST 2002:<E> <EJB> Could not deploy:
'C:\apps\web\weblogic\m
ycluster\lib\ErfpLibrary.jar': file is not a valid jar file, or does
not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening
JAR file C:
\apps\web\weblogic\mycluster\lib\ErfpLibrary.jar; nested exception is:
weblogic.ejb.deployment.JarLoadException - with nested
exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\we
b\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib
\ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\web
\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib\
ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterface
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
at weblogic.boot.ServerSecureClassLoader.secureDefineClass(ServerSecureC
lassLoader.java:143)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:495)
at weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java:339)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:183)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:157)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
at weblogic.boot.ServerSecureClassLoader.secureDefineClass(ServerSecureC
lassLoader.java:143)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:495)
at weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java:339)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:183)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:157)
at weblogic.ejb.deployment.dd.DeploymentUnit.loadClass(DeploymentUnit.ja
va:101)
at weblogic.ejb.deployment.dd.DeploymentUnit.initializeMethodInfos(Deplo
ymentUnit.java:424)
at weblogic.ejb.internal.EJBJarLoader.initializeMethodInfos(EJBJarLoader
.java:129)
at weblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java
:392)
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:21
1)
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:18
2)
at weblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:16
4)
at weblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java
:172)
at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:1
22)
at weblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:1
12)
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:311)
at weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:
653)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:247)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1386)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:879)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:140)
at weblogic.Server.main(Server.java:97)
at weblogic.Server.main(Server.java:58)
--------------- nested within: ------------------
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\we
b\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib
\ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e]
at weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
at weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:
653)
at weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:247)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1386)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:879)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:140)
at weblogic.Server.main(Server.java:97)
at weblogic.Server.main(Server.java:58)
Thu Nov 07 12:59:32 CST 2002:<I> <EJB> 0 EJB jar files loaded,
containing 0 EJBs
</full_output>

Generally we get this error when we did not packaged properly, like if use
tool win zip for packaging the bean.
1. when you are building EJB jar, please make sure that you have created a
directory "META-INF" with upper case letters
2. Make sure that you have deployment descriptors in 'META-INF".
3. Use Command line console, java command to package the bean like
"jar -cv0f".
ignore this mail, if you already done this way.
Can you try packaging your
"Sharkie" <[email protected]> wrote in message
news:[email protected]...
I have weblogic 5.1 running on Win2K. I can start it up without
problems when the deployment part is commented out.
The jdbc connection seems to be working with a Oracle 8.1.7
running on the same Win2K box.
When I try to deploy some EJBs I get this error on startup:
<error>
Thu Nov 07 12:59:31 CST 2002:<E> <EJB> Could not deploy:
'C:\apps\web\weblogic\mycluster\lib\ErfpLibrary.jar': file is not a
valid jar file, or does not contain a valid bean
</error>
here's the full error output:
Any ideas on what's missing here?
<full_output>
Thu Nov 07 12:59:31 CST 2002:<E> <EJB> Could not deploy:
'C:\apps\web\weblogic\m
ycluster\lib\ErfpLibrary.jar': file is not a valid jar file, or does
not
contain a valid bean
weblogic.ejb.common.DeploymentException: DeploymentException opening
JAR file C:
\apps\web\weblogic\mycluster\lib\ErfpLibrary.jar; nested exception is:
weblogic.ejb.deployment.JarLoadException - with nested
exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\we
b\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib
\ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e]
weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\web
\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib\
ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterface
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
atweblogic.boot.ServerSecureClassLoader.secureDefineClass(ServerSecureC
lassLoader.java:143)
atweblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:495)
atweblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java:339)
atweblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:183)
atweblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:157)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
atweblogic.boot.ServerSecureClassLoader.secureDefineClass(ServerSecureC
lassLoader.java:143)
atweblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:495)
atweblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java:339)
atweblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:183)
atweblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:157)
atweblogic.ejb.deployment.dd.DeploymentUnit.loadClass(DeploymentUnit.ja
va:101)
atweblogic.ejb.deployment.dd.DeploymentUnit.initializeMethodInfos(Deplo
ymentUnit.java:424)
atweblogic.ejb.internal.EJBJarLoader.initializeMethodInfos(EJBJarLoader
.java:129)
atweblogic.ejb.internal.EJBJarDeployment.setupJar(EJBJarDeployment.java
:392)
atweblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:21
1)
atweblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:18
2)
atweblogic.ejb.internal.EJBJarDeployment.setup(EJBJarDeployment.java:16
4)
atweblogic.ejb.internal.EJBDeploymentImpl.<init>(EJBDeploymentImpl.java
:172)
atweblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:1
22)
atweblogic.ejb.internal.EJBJarDeployment.<init>(EJBJarDeployment.java:1
12)
atweblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:311)
atweblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:
653)
atweblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:247)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1386)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:879)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:140)
at weblogic.Server.main(Server.java:97)
at weblogic.Server.main(Server.java:58)
--------------- nested within: ------------------
weblogic.ejb.deployment.JarLoadException - with nested exception:
[weblogic.ejb.common.DeploymentException: Problem creating deployment
C:\apps\we
b\weblogic\mycluster\lib\ErfpLibrary.jar from
C:\apps\web\weblogic\mycluster\lib
\ErfpLibrary.jar; nested exception is:
java.lang.NoClassDefFoundError:
com/ebreviate/erfp/utils/ClusterInterfac
e]
atweblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
atweblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:
653)
atweblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:247)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1386)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:879)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:140)
at weblogic.Server.main(Server.java:97)
at weblogic.Server.main(Server.java:58)
Thu Nov 07 12:59:32 CST 2002:<I> <EJB> 0 EJB jar files loaded,
containing 0 EJBs
</full_output>

Can I create a custom XMP panel but using the exact same fields from standard XMP panels?

Hi,
I am new to XMP and not very technical, so please excuse me if this sounds like a stupid question!
I have managed to create my own custom panels for Photoshop using the Generic Panel method with my own custom fields and they work fine. However what I need to do now is create a custom panel that uses the exact same fields from some of the standard panels. The reason being is that I have 4 fields that need to be integrated into another non-adobe system (Extensis Portfolio) that recognizes standard XMP fields, but at present these 4 fields are spread across different standard panels and it would be much easier for the user in Photoshop if they were all together on one panel.
An example field is the "Additional Model Info" field that currently resides on the standard IPTC Extension panel. If I fill in a value in this field on a JPEG then open the the image in Extensis Portfolio, then the field is also filled in in a field called IPTC - Model Info, displaying a key of Iptc4xmpExt:AddlModelInfo.
Is there a way I can take this standard field and use it on a custom panel, so that it can still be filled in in Photoshop and the value viewed in Extensis Portfolio? Sure I can create a custom panel and create a field called "Additional Model Info" but I can't figure out how to connect it to the corresponding field in Portfolio. I tried changing the xmp_property name="Iptc4xmpExt:AddlModelInfo" but this just broke the panel.
Is what I am trying to do possible and if so how and can it be done using the Generic Panel method?
Many thanks!

I am trying to do the same thing but with only the IPTC Keywords field. Searching everywhere but no luck.
Thanks!

SSRS Variance expression problem. Create a Variance expression. Compare current month with same month from previous year.

Similar Messages

Maybe you are looking for