Standard IDOC for WORK CENTER Master

Hi,
Please suggest the standard IDOC for work center master.
I have tried PWKC.Got  DUMP when executed.
Tried on SAP-Market place for help.Suggested not to use PWLC.
Please suggest alternative.

Will you please explain in a bit detail if LOIWCS01 or LOIWCS02 are transaction (as i tried to execute) or programs or please explain how to use these.(I executed from command prompt and SE38 but didnt helped)

Similar Messages

  • Standard Idoc for Work order?

    Hi,
    Can you please let me know what is the Standard Idoc for Work order?
    Thanks
    POINTS WILL BE AWARDED

    Hello,
      Standard IDOC type for Work Order is LOIPRO01.
    Thanks,
    Venu

  • ALE/iDoc for Work Center data transfer

    Hello, community.
    I am working on several interfaces for the PP and PM modules using iDocs/ALE.
    One of the requirements is that only created and modified data must be distributed from R/3.
    For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
    The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
    Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
    Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

    Hi Danilo,
    Do you know what the process codes are for
    LOIWCS and LOIROU ?
    Appreciate your help.
    Thanks,
    Gopi.

  • Send Work Center Master data through IDOC

    Hello All
    Kindly provide me the standard IDOC type for work center master and the transaction to send work center master data using ALE and IDOC.
    Regards
    Avishek

    Hi,
    try IDocs LOIWCS01 or LOIWCS02 via PFAL or PWKC.
    Regards,
    Kai

  • Standard IDOC to transfer Work center master

    Hi all,
    Please tell me the tcode of Standard IDOC to transfer Work center master from one system to another.
    Thanks.

    Hello,
    There will be no standard Idoc like this we have an std idoc type.
    if so u want search goto tcode we02 .
    Thank u,
    Jay..............................

  • WORK CENTER  master data n corresponding Bapi

    Hi........Gurus,
    Guys Please provide me hep for creating WORK CENTER master data using Bapi
    if u r providing exact Bapi name for creating  WORK CENTER master data or please provide step by step documentation or program logic
    that would be heplful to me
    Feel free to ask me if my Q is not clear
    Thanks in Advance
    Ravindra

    hi,
    Customized Work Center List
    The standard SAP Work Center List - CR05 includes the flag for
    deletion work center. This customized work center list allows
    you to include or exclude those work center that have been flag
    for deletion.  Those with a 'X' in the list are flag for deletion.
    REPORT ZPPWORKCENTER
           LINE-SIZE 120 NO STANDARD PAGE HEADING LINE-COUNT 058(001).
    TABLES: CRHD,  "Work Center Header
            CRTX,  "Text for the Work Center or Production Resource/Tool
            CRCO.  "Assignment of Work Center to Cost Center
    SELECT-OPTIONS: S_WERKS FOR CRHD-WERKS    DEFAULT 'XX',
                    S_LVORM FOR CRHD-LVORM.
    SELECT * FROM CRHD WHERE LVORM IN S_LVORM
                         AND WERKS IN S_WERKS.
       CLEAR CRCO.
       SELECT SINGLE * FROM CRCO WHERE OBJTY = 'A'
                                   AND OBJID = CRHD-OBJID
                                   AND ENDDA => SY-DATUM.
       CLEAR CRTX.
       SELECT SINGLE * FROM CRTX WHERE OBJTY = 'A'
                                   AND OBJID = CRHD-OBJID
                                   AND SPRAS = 'E'.
       WRITE: / CRHD-LVORM,
                CRHD-WERKS UNDER 'Plnt',
                CRHD-ARBPL UNDER 'Work Center',
                CRCO-KOSTL UNDER 'Cost Center',
                CRTX-KTEXT UNDER 'Description'.
    ENDSELECT.
    TOP-OF-PAGE.
        WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
                 SY-PAGNO.
        SKIP.
        WRITE:/3 'Plnt',
               8 'Work Center',
              20 'Cost Center',
              33 'Description'.
    *-- End of Program
    try these bapis...
    BAPI_BUSPROCESSND_CREATEMULTI
    BAPI_WORKCENTER_GETDETAIL
    BAPI_STANDARDMATERIAL_CREATE
    THANKS
    KARTHIK

  • User Exit or DB-Table for Work Center (CR01)

    Hi!
    I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
    So, does anybody know an user exit or BADI for work center?
    Also possible:
    The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
    Thanks,
    Konrad

    > You can check the BADI definition from transaction SE18,
    > 'LTRM_WORK_CNTR_DTRM', this might be helpful,
    How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
    > Work center details are avilable in CRHD table, you can
    > look for CR* from SE11 transaction,
    I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
    Thanks,
    Konrad

  • What is the standard IDOC for substation management??

    hi friends..
    could you please tell me standard idoc for substation management ?
    and also tell me standard BAPI for substation management??
    please help me..
    thanks and regards
    regards
    ram

    Hi michal..
    thank you very much for your quick response.
    i got source xml file like this
    <?xml version="1.0" encoding="utf-8" ?>
    - <MonthlyEnergies xmlns="http://aaaaa.org/MonthlyEnergy.xsd">
      <Values Power_Produced="22" Reduction_Power_Consumed="1203.92" Ancillary_Power_Consumed="1056.08" UOM="KWH" Date="2006-09-30T00:00:00" />
      </MonthlyEnergies>
    i am trying  to convert this into SAP .
    for this i need IDOC .
    Power_Produced  = RK40C_KBXXN-STAGR (RK40C_KBXXN is structure)
    Reduction_Power_Consumed = RK40C_KBXXN-STAGR
    Ancillary_Power_Consumed = RK40C_KBXXN-STAGR
    UOM=RK40C_KBXXN-MEINB
    date = BUDAT
    guide me..
    thanks and regards
    ram

  • Tables for routing (for work center)

    hi friends,
    I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
    i try to get result by using link with PLPO and PLKO.
    in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
    kindly can anybody tell me how to work center.
    thanks & regards
    Bhupinder Singh Kaler

    Hi Bhupi kaler,
    try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
    Best regards,
    raam

  • Change log for work center data

    Hi,
    I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
    When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
      I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
      Can anyone tell me as to why this is happening.
    What I think is that some changes to the configuration are required in order to log the changes in the database.
    Kindly help.
    Regards
    Varun

    Hi Wolfgang,
    Thanks for the information.
    However i have another question.
    The change table will have data only when it is activated in the configuration menu.
    However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
    See if you can help me on that.
    Regards
    Varun

  • Table for work center..........

    Hi
    Is there any table for work center which shows available capacity v/s utilized capacity......Please revert with your valuable comments
    Rgds

    Hi,
    Check Table RC65L.
    Regards
    Kannan

  • Standard Idoc for Goods Issue from MIGO and standard BADI to do the MIGO-GI

    Hi Gurus
    What is the standard IDoc for Goods Issue from MIGIO and standard BADI that takes care of Goods Issue from MIGO?
    Thanks

    BADI :
    MB_MIGO_ITEM_BADI
    MB_MIGO_BADI
    Idocs:
    /ISDFPS/GOODSMVT_SAPCREATE01
    /CWM/MBGMCR01

  • Standard Idoc for Purchase order?

    Hi,
    Can you please let me know what is the Standard Idoc for Purchase order?
    POINTS WILL BE AWARDED

    Hi Guest
    You can use it, if all your required field are in that Idoc basic type.
    http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
    http://abapprogramming.blogspot.com/2007/11/abap-idocs-basic-tools.html
    Award points for helpful answers

  • Standard Idoc for Purchase Order Receipt?

    Hi Experts,
    Is there a standard idoc for Purchase Order Receipt?
    Please let me know.
    Thanks,
    Rakesh.

    here we go:
    Goods Receipt MIGO IDOC

  • How to find the standard Idoc for Transfer Order (LT03)

    hi
    How to find the standard Idoc for Transfer Order (LT03)
    How to create the Idoc on LT03
    plz help me out
    Thank u
    Ram

    Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
    Please reward points

Maybe you are looking for