Start ds6 at boot in red hat?
I cannot find this info in manual. How do I set up the ds to start up upon system boot in red hat? When I installed ds6 on rhel 4 I did not choose startup at boot option. I recall that being an option although I may be wrong.
The ds instance is started by root but then run by another user on the system. In other words, the ds as its own runtime user that is not root.
I do have a file /etc/init.d/dsee_directory and this is set to run on boot but its not working. Maybe I need to edit this file and/or set ds path variable for system.
issue the following as root: dsadm autostart /path/to/your/instance
Similar Messages
-
Order of installing Windows XP, Solaris & Red Hat Linux...
Hi all,
If I were to install Windows XP, Red Hat Linux & Solaris in intel dual core machine, in which order do I proceed to install. First Windows XP, then Solaris & Linux, I believe. Am I right. If not, please correct me.
Thanks,
...Although posted under different title and content, your most recent thread
Windows and Solaris not booting on a Windows, Solaris and Linux Machine.
is actually the duplicate of this thread.
The right order of install is Windows XP, RHEL, Solaris. Because, if the Linux is the last installed OS, the Linux version of GRUB will be installed on the MBR (Master Boot Record), and you will not be able to boot Solaris. Why? Because the Linux GRUB doesn't currently recognize Solaris VTOC (Volume Table Of Contents) and UFS (Universal Disk Format File System) formats. Only the Solaris version of GRUB works as common loader for Solaris and Linux. Since you installed Linux as the last OS (as per your duplicated thread), you can try to chainload from the Linux GRUB by modifying the grub.conf on Linux, eg:
# cat /boot/grub/grub.conf
default=2
timeout=15
color white/blue black/cyan
title Windows XP
rootnoverify (hd0,0)
chainloader +1
title Solaris 5.10
root (hd0,1)
makeactive
chainloader +1
boot
title Red Hat Enterprise Linux AS (2.6.9-78.0.1.el5)
root (hd0,2)
kernel /vmlinuz-2.6.9-78.0.1.el5 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-78.0.1.el5.imgwhere
(hd0) is the first (bootable) BIOS physical disk, and GRUB boot loader is installed on its MBR
(hd0,0) is the first primary partition of the first BIOS disk - Windows XP
(hd0,1) is the second primary partition of the first BIOS disk - Solaris 5.10
(hd0,2) is the third primary partition of the first BIOS disk - RHEL-4
Modify this according to your real disk partition map if it's necessary.
If this doesn't work (at least it should work for Windows and Linux), then I suggest reinstalling all three OSs from the ground up. A year ago I successfully installed Windows Server 2003, RHEL-4.5 and Solaris 10 on single 250 GB physical disk. You can follow my procedure. Before that, boot the system with the first RHEL-4 installation CD, type "linux rescue" and press Enter. When linux console appears, delete all partitions using fdisk. Or, alternatively, type
dd if=/dev/zero of=/dev/sda bs=1024 count=2048This will erase your Master Boot Record and MBR Partition Table inside it, even much more filling out 2 MB continuous disk area with zeros. Restart the system, insert Windows installation media and start the procedure:
1. install Windows XP as the first OS. If it doesn't matter, create only one 25 GB C: drive on the entire primary partition rather than 10 GB C: and 15 GB D: drives, unless you are not sure Solaris had overwritten the D: drive on the extended partition
2. install RHEL-4 as the second OS. At this point you will be able to access Windows and RHEL-4 from GRUB. Boot RHEL-4 and navigate to /boot/grub/grub.conf. As you might need this information later, copy or make a note of the Linux entry on paper. The entry is something like this:
title Red Hat Enterprise Linux AS (2.6.9-78.0.1.el5)
root (hd0,1)
kernel /vmlinuz-2.6.9-78.0.1.el5 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.9-78.0.1.el5.img3. install Solaris 10 (SunOS 5.10) as the third OS. That way the Solaris version of GRUB will overwrite Linux GRUB in MBR and will be installed as the common loader for all three OSs. At this point your system might be set to boot all three operating systems. If not, you will be able to access the Solaris and Windows only. In that case boot Solaris, navigate to /boot/grub/menu.lst and add the Linux entry you copied from Linux grub.conf in the step 2. The next time you restart the system, you should be able to boot all three operating systems using Solaris version of GRUB.
NJ -
TD340 Red Hat Linux 6.4 during start up give Kernel Panic
I am a newbie and please forgive my newness
I recently bought a TD340 with 32GB Ram, OB SAS RAID 300.
While using the ThinkServer EasyStart up to configure the installation of Red Hat Linux 6.4. I am able to finish the installation successfull, however, after the installation is completed and and Linux 6.4 boots up, in the middle of the start up a I get the following message:
Kernel Panic - not syncing - attempted to kill
Pid: 1 comm: init not tainted 2.6.39-400.17.1
Call Trace:
and it nevers boots up sucessfully.
Any help would be appreciated.It clearly mentions its bootstrap issue in Java stack. The bootstrap log files can be found in /usr/sap/<SID>/JC<XX>/work/ folder.
dev_bootstrap* ; log_bootstrap* ; jvm_bootstrap*.
In one of these files, it will be mentioned, synchronization exception...Database initialization failed.
90% of the issue is caused dude to Database not getting initilized or its not connected or userauthorizations missing or driver class secured in the Secure store is incorrect.
Troubleshooting J2EE Engine 6.40/7.0 Bootstrap Issues
SAP Note Number: 997510
Check this note, you will get all the answer!!
And award points if it helped.
-Subbu -
Can't start the runInstaller for Oracle 8.1.7 on Red Hat 7.2 Linux
I can't start the runInstaller for Oracle 8.1.7 under Red Hat Linux 7.2 (enigma).
Please Help Me!I have the same problem as you had,but my one is that after typing ./runInstaller it will terminate, when you run ps -ef | grep oracle , there are still some backend process running over there.
Does any one has experience to install Oracle8i on Linux? Pleae give us help.
Jeff -
Red hat 6.0 & ows 3.0x & wrb listener doesn't start
is there a patch for upgrading the oracle application 3.x to work
on red hat 6.0? I got the patchset for the 8.0.5 db and it
now works correctly but when I try to start the web server
i get:
OWS-08820: Unable to start WRB process
`/home/oracle/ows/3.0/bin/mnaddrsrv'.
I see there has been recent discussion about OAS 4.0.7 and a
patch but nothing about 3.x
nullbear (guest) wrote:
: oas3.0 can not run on rh6 ,owsctl can not start wrb and adm
Downgrade your procps rpm package to 1.2.9
Don't forget to create a sym link for /var/opt/oracle/oratab
to /etc/oratab
Even the PS/SQL cartridge works....
Greetings, Eric.
null -
How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4
I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.
I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out. -
IPlanet 7.0.15 on Red Hat - Problems starting web server
I completed the installation of iPlanet 7.0.15 on Red Hat Linux 5. The Admin server starts fine, however when I attempt to start the web server I get the following error:
Oracle iPlanet Web Server 7.0.15 B04/19/2012 21:52
catastropheinfo: CORE3282: stdout: Error occurred during initialization of VM
info: CORE3282: stdout: Unable to load native library: /opt/Apps/libjava.so: cannot open shared object file: No such file or directory
: CORE4005: Internal error: unable to create JVM
failure: server initialization failed
I am not sure what is causing this error? I selected the default, "Install JDK that is provided with iPlanet" and it is located in directory:
/opt/Apps/Oracle/webserver7/jdk
I am not sure why the native library in /opt/Apps/libjava.so is being referenced.
I have tried several things including installing Java in /usr/bin from a download from Oracle. It appears to work just fine.
I have installed and reinstalled - same problem.
Any ideas?Okay this one turned out to be fairly simple. It was a permissions issue. One of my top level directories (/opt/Apps/Oracle) did not have world execute permissions. Once I changed the directory permissions the web server came up fine. It only took me 5 days to find this and fix it.
-
"Could not start Agent" with SunMC 3.6.1 on Red Hat Enterprise release 4
Hi everyone,
I'm trying to install the Linux agent from the SunMC 3.6.1 installation dvd on a RedHat system (kernel 2.6). The installation seems to go fine, but while seting up the agent I recieve the following eror:
/opt/SUNWsymon/base/sbin/xget: error while loading shared libraries: libxcfg.so.1.0: cannot open shared object file: No such file or directory
/opt/SUNWsymon/base/sbin/xput: error while loading shared libraries: libxcfg.so.1.0: cannot open shared object file: No such file or directory
Naturally, in the end you get the message "Could not start Agent"...
Has anybody experienced this with a RedHat system or any other Linux system?
Best Regards,
EmeraldHi!
I am trying to install SunMC 4.0 agent in a Red Hat Enterprise Linux AS release 4 (whith a SunMC server installed in a Solaris 10 platform).
I had installed the agent in the Red Hat, but the agent did not start.
I got this messages from the agent.log ( the same messages that Emerald)
[00000000 0046 ]info May 14 10:19:25 agent Channel already exists: syslog......................
[00000001 0048 ]info May 14 10:19:25 agent using ip mode for URL addressing....................
[00000002 003b ]info May 14 10:19:25 agent enabling timed jobs.................................
[00000003 004d ]info May 14 10:19:25 agent subagent registry successfully loaded...............
[00000004 005a ]info May 14 10:19:25 agent loading trap actions: subagent-manager-trap-action..
[00000005 0040 ]info May 14 10:19:25 agent startLegacySubagents: <>............................
[00000006 003e ]info May 14 10:19:25 agent activating MIB objects..............................
[00000007 0047 ]info May 14 10:19:25 agent *** shutting down subagents ***.....................
[00000008 005d ]error May 14 10:19:25 agent stopemd: action command script em-daemon.sh not found.
[00000009 007b ]error May 14 10:19:25 agent invalid dictionary entry: internal outBoundTrap in b
ase-agent.x(221) at token '???'............................................................................
[0000000a 0042 ]error May 14 10:19:25 agent *** aborting execution ***..........................
[0000000b 0046 ]info May 14 10:20:29 agent Channel already exists: syslog......................
[0000000c 0048 ]info May 14 10:20:29 agent using ip mode for URL addressing....................
[0000000d 003b ]info May 14 10:20:29 agent enabling timed jobs.................................
[0000000e 004d ]info May 14 10:20:29 agent subagent registry successfully loaded...............
[0000000f 005a ]info May 14 10:20:29 agent loading trap actions: subagent-manager-trap-action..
[00000010 0040 ]info May 14 10:20:29 agent startLegacySubagents: <>............................
[00000011 003e ]info May 14 10:20:29 agent activating MIB objects..............................
[00000012 0047 ]info May 14 10:20:29 agent *** shutting down subagents ***.....................
[00000013 005d ]error May 14 10:20:29 agent stopemd: action command script em-daemon.sh not found
Had anyone resolve this isue?? or had any ideas to resolve it??
Thanks in advance.
maza -
Unable to start oracle app server 10g through opmnctl file Red Hat linux
Hi gurus,
I have a VM (Red Hat Linux based). I am not able to start my application server 10g through opmnctl file (exists in opmn/bin folder).
I open that folder opmn/bin through terminal and write the following command
opmnctl startall
nothing is happening... is there any way to start the server through GUI?
can you please guide me.
Thanksprocess has been started now..Please post the result of$ $ORACLE_HOME/opmn/bin/opmnctl status
after that when I run the it from browser nothing is comming..Don't you get any error ?
for app server admin i wrote http://pcname:port/
This should work. Is port the correct one ? Check out $ORACLE_HOME/install/portlist.ini. Did you try IP address, instead of pcname ? Do you have any active firewall on your linux server ?
for simple form run http://pcname:port/frmservlet/
This one should be http://pcname:port/forms/frmservlet -
StarOffice8 On Red Hat Linux x_86_64 Won't Start
I've just purchased the upgrade to StarOffice8 and installed it on my Red Hat Linux (AMD-64). The installation finished without any errors at all. I checked and all files were installed. However, when I start any of the apps, nothing displays. I can see the processes with 'ps' command but nothing on screen. I've changed the monitor resolution as described in the README, nothing works. All other X-WIndows stuff works fine. I have a pretty standard video card, the Nvidia FX 5200 and Red Hat came with drivers for that adapter. Can anyone help with this?
Hi Mink,
Confirm you have 1.5 GB free in /tmp. If not you can point the installer to another location -- set the variables TEMP, TMP, TEMPDIR to that new directory if you need to.
Regards,
John A. Booth
http://www.metavero.com -
8.1.7 Installer wont start on Linux Red Hat 7.2
When we run runInstaller it says starting installer....but nothing happens. The prompt returns and the installer never comes up.
Has anyone experienced this?http://www.idevelopment.info/data/DBA_tips/DBATIP_54.shtml
Installing Oracle8i on Red Hat Linux 7.1 / 7.2
by Jeff Hunter, Sr. Database Administrator
Overview
The following article is a summary of the steps required to successfully install the Oracle 8i (8.1.7) database on Redhat Linux 7.1 and 7.2.
Downloading / Unpacking the Oracle 8i Installation Files
Download Oracle 8i from Oracle's OTN Site.
(If you do not currently have an account with Oracle OTN, you will need to create one. This is a FREE account!)
http://otn.oracle.com/software/products/oracle8i/htdocs/linuxsoft.html
Unpack the downloaded file:
% tar xvf linux81701.tar
You should now have a directory called "Disk1" containing the Oracle 8i Installation files:
/Disk1
Swap Space Considerations
Installing Oracle 8i requires a minimum of 128MB of memory.
(An inadequate amount of swap during the installation will cause the Oracle Universal Installer to either "hang" or "die")
To check the amount of memory / swap you have allocated, type either:
% free
- OR -
% cat /proc/swaps
- OR -
% cat /proc/meminfo | grep MemTotal
If you have less than 128MB of memory (between your RAM and SWAP), you can add temporary swap space by creating a temporary swap file. This way you do not have to use a raw device or even more drastic, rebuild your system.
As root, make a file that will act as additional swap space, let's say about 300 MB:
% dd if=/dev/zero of=tempswap bs=1k count=300000
Now we should change the file permissions:
% chmod 600 tempswap
Finally we format the "partition" as swap and add it to swap space:
% mke2fs tempswap
% mkswap tempswap
% swapon tempswap
Download and Install Libraries
Before running the Oracle Universal Installer (OUI), you will need to install several RPMS. Failing to install these packages will cause the installer to fail. (In fact, the OUI will not even appear)
You will find these RPMS within your Redhat 7.1 distribution CD set:
compat-glibc-6.2-2.1.3.2.i386.rpm (CD1)
compat-egcs-6.2-1.1.2.14.i386.rpm (CD2)
compat-libs-6.2-3.i386.rpm (CD2)
You can also find these RPMS on Redhat's website:
ftp://ftp.redhat.com/pub/redhat/linux/7.1/en/os/i386/RedHat/RPMS/compat-glibc-6.2-2.1.3.2.i386.rpm
ftp://ftp.redhat.com/pub/redhat/linux/7.1/en/os/i386/RedHat/RPMS/compat-egcs-6.2-1.1.2.14.i386.rpm
ftp://ftp.redhat.com/pub/redhat/linux/7.1/en/os/i386/RedHat/RPMS/compat-libs-6.2-3.i386.rpm
Install the following RPMS as the "root" user account:
% rpm -i compat-glibc-6.2-2.1.3.2.i386.rpm
% rpm -i compat-egcs-6.2-1.1.2.14.i386.rpm
% rpm -i compat-libs-6.2-3.i386.rpm
Install the Java Development Kit (JDK)
In order to use Oracle's HTTP [Apache] Server, you will need to download the appropiate JDK 1.2.2 from Sun.
As per the JDK documentation, install JDK under /usr/local.
Then create a symbolic link to the JDK under /usr/local/java.
Sun's JDK 1.2.2
Download from: http://java.sun.com/products/jdk/1.2/download-linux.html
Install as root:
% cp jdk-1_2_2_009-linux-i386.tar.gz /usr/local
% gunzip jdk-1_2_2_009-linux-i386.tar.gz
% tar xvf jdk-1_2_2_009-linux-i386.tar
% ln -s /usr/local/jdk1.2.2 /usr/local/java
% rm jdk-1_2_2_009-linux-i386.tar
Create Oracle Account and Directories
Create Oracle User Account:
% groupadd -g 115 dba
% useradd -u 173 -c "Oracle Software Owner" -d /u01/app/oracle -g "dba" -m -s /bin/bash oracle
% passwd oracle
Create Oracle Directories:
% mkdir /u01
% mkdir /u01/app
% mkdir /u01/app/oracle
% mkdir /u01/app/oracle/product
% chown -R oracle:dba /u01/app/oracle
% mkdir /u03
% mkdir /u03/app
% mkdir /u03/app/oradata
% mkdir /u03/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u03/app/oradata
% mkdir /u04
% mkdir /u04/app
% mkdir /u04/app/oradata
% mkdir /u04/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u04/app/oradata
% mkdir /u05
% mkdir /u05/app
% mkdir /u05/app/oradata
% mkdir /u05/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u05/app/oradata
% mkdir /u06
% mkdir /u06/app
% mkdir /u06/app/oradata
% mkdir /u06/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u06/app/oradata
% mkdir /u07
% mkdir /u07/app
% mkdir /u07/app/oradata
% mkdir /u07/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u07/app/oradata
% mkdir /u08
% mkdir /u08/app
% mkdir /u08/app/oradata
% mkdir /u08/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u08/app/oradata
% mkdir /u09
% mkdir /u09/app
% mkdir /u09/app/oradata
% mkdir /u09/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u09/app/oradata
% mkdir /u10
% mkdir /u10/app
% mkdir /u10/app/oradata
% mkdir /u10/app/oradata/<ORACLE_SID>
% chown -R oracle:dba /u10/app/oradata
% mkdir /opt/bin
% chown oracle:dba /opt/bin
Oracle Environment Variable Settings:
An example ".bash_profile" is provided in the Configuration Files / Scripts section below.
Ensure to set the environment variable: LD_ASSUME_KERNEL=2.2.5
Also make sure to "source" the following:
source /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
Run the Oracle Installer
As the "oracle" user account:
Set your DISPLAY variable to a valid X Windows display.
% DISPLAY=<Any X-Windows Host>:0.0
% export DISPLAY
NOTE: If you forgot to set the DISPLAY environment variable and you get the following error:
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
you will then need to execute the following command to get "runInstaller" working again:
% rm -rf /tmp/OraInstall
If you don't do this, the Installer will hang without giving any error messages. Also make sure that "runInstaller" has stopped running in the background. If not, kill it.
Change directory to the Oracle installation files you downloaded and extracted. Then run: runInstaller.
% cd /Disk1
% ./runInstaller
During the installation, DO NOT choose to "Create A Database". This how I answered the questions:
Inventory Location: /u01/app/oracle/oraInventory
UNIX Group Name: dba
Full path name of the Oracle Home: /u01/app/oracle/product/8.1.7
Oracle Univeral Installer in: /u01/app/oracle/oui
JDK Home: /usr/local/java
Errors during the Relink Phase of the Install
During the "Relink Phase" of the install, you will get several errors. When any of the relinks do fail during installation just keep pressing "ignore". After running "root.sh", and you are at the point when you are at the "Network Configuration screen", you will need to close the installer as this will also not work due to the earlier relink problem.
After exiting the Installer, you need to apply patch for bug 1467074 (as the "oracle" OS user). Now you should be able to run ORACLE executables. To install the Oracle patch for bug 1467074, run the following in your ORACLE_HOME as the "oracle" user account:
% mv glibc-2.1.3-stubs.tar.gz $ORACLE_HOME
% gunzip glibc-2.1.3-stubs.tar.gz
% tar xvf glibc-2.1.3-stubs.tar
% ./setup_stubs.sh
You will also need to enter LD_ASSUME_KERNEL=2.2.5 in your .profile for the "oracle" user account so that they you can run programs like "dbssist" and "netca". -
Installation of Oracle AS 10g on Red Hat ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
Installation of OracleAS 10g on Red Hat Linux ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
Prime setup 2.0.0.0.294-2-K9 asks for Red Hat CD
Ok since i have this problem with a Cisco Prime
https://supportforums.cisco.com/discussion/12333166/ncs-prime-lost-licenses-after-application-restore
I decided to do a complete re-install.
Since this is a physical appliance i downloaded the PI-APL-2.0.0.0.294-2-K9 image and burnt it on a DL DVD.
Yesterday i was onsite and booted from the DVD the process starts.
Selected the re-install option with Keyboard & Monitor attached then the setup starts and we get the "Welcome to Red Hat Enterprise Linux Server" screen after a few minutes i get a pop up asking me for the Red Hat Linux CD.....
After trying this a few times i canceld it and removed the Prime from the rack todo a re-install at my company.
Here i have the same problem.
I do have an NCS-APL-1.1.1.24-1-K9 image from an earlier crash and this works fine.
But i dont really want to do the upgrade process from 1.1 --> 2.0 again since there is an image available with a clean 2.0.0.94 install.
The appliance type is PRIME-NCS-APL-K9 V02
Anyone have an idea ?Hi Danjan,
****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.
Once the file has beenuploaded, you can select the update and click install.
After installing, it shouldindicate "Pending Restart" = Yes. You will likely need to
go to the cli and do an "ncs stop" and then "ncs start".
Hope it will help
Thanks-
Afroz
[Do rate the useful post] -
I am trying to install OS (Red hat 6.0) in Dell 1950 power-edge III gen, After booting CD i got option to hit F1 to install or let is continue to start the installation process. now screen goes to next step and key board and mouse stop working . it stop me from further step. Please help
SamTry booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/
Maybe you are looking for
-
How to use different images in the Table of Contents?
Hello everyone, I am creating an iBook about Architecture and I would like to have different images for each Chapter in the Table of Contents... But when I add an image it automatically appears on all the other chapters, too. What am i doing wrong?
-
Lenght of imported images is always 1 frame
I'm learning how to use After Effects (CC2014 in this case) and as soon as I started I found this problem. In all the tutorials I've seen, when an imported file (in this case a .png) is put in the composition, its lenght is by default the same as the
-
How do I create an Image of my Solaris 10 (Intel) server?
I'm currently running Solaris 10 (Intel) on a Dell PowerEdge 2650. I'd like to create an Image of the server now that I have all the extra software installed and configured correctly. I used Symantec Ghost for my Window based servers, does anyone hav
-
FF 17 initial crash prior to update with Shockwave Flash 11.5.502.135 which RESOLVED. Then Java 7 U9 began crashing. Bios updated, All Software/Hardware updated as well. Installed U10 from Oracle and still crashing. Got rid of U10 and went back to U9
-
How can I read an email that someone sent me if it is in powerpoint?
How can I read an email that someone sent me if it is in powerpoint?