Start the J2EE SDK in the foreground on Windows

I have upgraded my development AS from Sun ONE 7 to J2EE SDK 8.1. One feature I miss most is: 7 used to live in a "Command Prompt" box where I could watch the log go by and sometimes press Ctrl+Break for a full thread dump.
Apparently 8.1 starts everything as a background process, and Windows lacks the equivalents of "tail -f server.log" and "kill -QUIT <pid>".
Is there a way to start 8.1 in the foreground, so that I can watch the log in real-time and generate a thread dump?

You are right, domain creation requires config/asenv.bat file to be in place.
It is possible that asenv.bat file did not get created properly due to incomplete uninstallation of the previous installation. To start from the scratch, follow the instructions in section 3 of this article:
https://j2ee-sdk.dev.java.net/howtos/J2EE_SDK_Installation_HOWTO.html#p3
(so, either install in a different location or cleanup component registration info).
If installation on the clean system fails again please post any errors.

Similar Messages

How i can start with j2ee sdk?

how i can start with j2ee sdk?

You're in the same boat I'm in. I started by looking at the tutorial! You will get your feet wet with this.
http://java.sun.com/j2ee/tutorial/index.html

HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!

Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

Can NOT start the dispatcher on windows NT

We installed a SAP system on NT.
However whenever we try to start the service DISPATCHER, we get the error: "process terminated unexpectedly".
There is NO other message about this.
Please input your experience. Thanks with points.

there are no services called DISPATCHER.
please provide the exact service name you are trying to start. it should look like SAPPRD_00.
check pathname/executable of this service, this file must exist.
as a last resort, copy this executable path and past it in a Command prompt. you might get more meaningful error messages that will help you fix this.

Starting up j2ee and EJB deployment tool on Windows 98

I will start off this question with an apology if it is too stupid,
basic, or placed in the wrong group. I am relatively new to the world
of Java and even newer to the world of Server-side Java and EJBs.
However, I am plugging away.
I am using my trusty 4 year old system with Windows 98 second edition
to dabble with Server-side Java and EJB applications. I am using
Tomcat 4.0 as my server. When I try and start the j2ee server or the
EJB deployment tool I get the following scrolling messages:
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Syntax error
Syntax error
Syntax error
Out of environment space
Bad command or file name
I have tried to adjust the memory settings in the DOS window with no
success. My question has three parts:
1) Can these applications be run using Windows 98 and if so what are
the exact DOS window memory settings for this?
2) Where exactly can I find the documentation that specifies this?
(please be specific as possible as I have read the readme.txt files
supplied with j2ee)
3) Should this and similar questions be posted in another
group/section?
I truly appreciate anyone's help with this.
Sincerely,
Tim

You're going to have a lot of pain unless you upgrade to Windows 2000 or XP.
In the mean time, set your environment size much larger (google for "Out of
environment space") and use WinOne from http://www.cia.com.au/luke/ ...
that's how I scraped by on Windows 98 for a while.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Tim" <[email protected]> wrote in message
news:[email protected]..
I will start off this question with an apology if it is too stupid,
basic, or placed in the wrong group. I am relatively new to the world
of Java and even newer to the world of Server-side Java and EJBs.
However, I am plugging away.
I am using my trusty 4 year old system with Windows 98 second edition
to dabble with Server-side Java and EJB applications. I am using
Tomcat 4.0 as my server. When I try and start the j2ee server or the
EJB deployment tool I get the following scrolling messages:
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Out of environment space
Syntax error
Syntax error
Syntax error
Out of environment space
Bad command or file name
I have tried to adjust the memory settings in the DOS window with no
success. My question has three parts:
1) Can these applications be run using Windows 98 and if so what are
the exact DOS window memory settings for this?
2) Where exactly can I find the documentation that specifies this?
(please be specific as possible as I have read the readme.txt files
supplied with j2ee)
3) Should this and similar questions be posted in another
group/section?
I truly appreciate anyone's help with this.
Sincerely,
Tim

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

Re: I am unable to start the service

Windows 2008
Oracle 11.2.0.2
Just completed patch install and when I try to start the service in Windows, I get the following error: "Windows could not start the OracleServiceSID service on <Server or host>" with the error 1053: The servcie did not respond to start or control request in timely fashing.
My Solution:
--Check tnsnames and listener
Listener started without the service name (sid)
Check listener's log and listener complaint about wrong sid
--Bounce server
Not still working.
Here is a partial view of the listener log:
Please take note of the Server_name=sid.hrd.webone.com. This service is not what I set as sid, I only made it sid, why is it showing the full string?
<msg time='2012-02-17T18:55:51.111-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='<SERVER>'
host_addr='::1'>
<txt>17-FEB-2012 18:55:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=<Server$>))(SERVICE_NAME=sid.hrd.webone.com )) * (ADDRESS=(PROTOCOL=tcp)(HOST=<IP address>)(PORT=63919)) * establish * sid.hrd.webone.com * 12514
</txt>
</msg>
<msg time='2012-02-17T18:55:51.111-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='<SERVER>'
host_addr='::1'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
Any help will be apprecaited:

868332 wrote:
Windows 2008
Oracle 11.2.0.2
Just completed patch install and when I try to start the service in Windows, I get the following error: "Windows could not start the OracleServiceSID service on <Server or host>" with the error 1053: The servcie did not respond to start or control request in timely fashing.
My Solution:
--Check tnsnames and listener
Listener started without the service name (sid)
Check listener's log and listener complaint about wrong sid
--Bounce server
Not still working.
Here is a partial view of the listener log:
Please take note of the Server_name=sid.hrd.webone.com. This service is not what I set as sid, I only made it sid, why is it showing the full string?
<msg time='2012-02-17T18:55:51.111-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='<SERVER>'
host_addr='::1'>
<txt>17-FEB-2012 18:55:51 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=<Server$>))(SERVICE_NAME=sid.hrd.webone.com )) * (ADDRESS=(PROTOCOL=tcp)(HOST=<IP address>)(PORT=63919)) * establish * sid.hrd.webone.com * 12514
</txt>
</msg>
<msg time='2012-02-17T18:55:51.111-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='<SERVER>'
host_addr='::1'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
Any help will be apprecaited:post content of sqlnet.ora

Using J2EE 1.4 Beta 2 on Windows 98 and Windows Me

I know J2EE isn't supported on Windows 98 and Windows Me, but like many others I've been able to get J2EE 1.3.1 and J2EE 1.4 Beta to work quite well on Windows 98 and Windows Me. However, no such luck when I tried to do the same with J2EE 1.4 Beta 2. Basically, after downloading j2eesdk-1_4-beta2-windows-eval-app.zip, extracting it into C:\j2ee_app_win, and double clicking setup.exe (or setup.dos.exe for that matter), the setup GUI doesn't appear. Has anybody gotten passed this point and gotten it to work?

Basically, J2EE 1.4 Beta 2 setup.exe doesn't work on Windows 98 or Windows Me even with 256 MB of memory. You'll see it appear on the task bar and then disappear right away. The setup task keeps running, so you have to kill it with Ctrl-Alt-Del.
However, J2EE 1.4 Beta 2 does work quite well on Windows XP Home Edition even though it's not supported by Sun. So if you don't have Windows XP Professional or Windows 2000, you can at least try it.
For help installing and getting started with J2EE 1.4 Beta 2 on Windows XP, see http://groups.msn.com/J2EETools.

Starting the J2EE server

Hi:
I am new to J2EE and I followed the instruction on the J2EE Tutorial setting up the J2EE SDK. When I tried to start the J2EE server by typing in "C:\j2ee -verbose", the server can't seem to start... After it gets to "Starting JMS service..." , it jumps back to the command prompt "C:\>"
If I then try to do a "j2ee -stop", I get an error "javax.naming.CommunicationException: Can't find SerialContextProvider" (which, I think, indicates the server never got started)
I am using Windows 2000 and I am pretty sure I have the environment variables set properly. Does anyone know why this is happening? Thanx!
The following is the trace of me doing "j2ee -verbose"
J2EE server listen port: 1050
Naming service started:1050
Binding DataSource, name = jdbc/DB1, url = jdbc:cloudscape:rmi:CloudscapeDB;crea
te=true
Binding DataSource, name = jdbc/EstoreDB, url = jdbc:cloudscape:rmi:CloudscapeDB
;create=true
Binding DataSource, name = jdbc/Cloudscape, url = jdbc:cloudscape:rmi:Cloudscape
DB;create=true
Binding DataSource, name = jdbc/InventoryDB, url = jdbc:cloudscape:rmi:Cloudscap
eDB;create=true
Binding DataSource, name = jdbc/DB2, url = jdbc:cloudscape:rmi:CloudscapeDB;crea
te=true
Binding DataSource, name = jdbc/XACloudscape, url = jdbc/XACloudscape__xa
Binding DataSource, name = jdbc/XACloudscape__xa, dataSource = COM.cloudscape.co
re.RemoteXaDataSource@b301f2
Starting JMS service...
C:\j2sdkee1.3.1\bin>
Eugene

I have read some posts and get the answer
change the pc language to English
and reinstall j2ee
all should be ok!
I get message "J2EE server startup complete" now.
luck!

Resin with the j2ee sdk

i'm using resin as my server. i set the build.properties to c:\resin-x-xx, but the libs are all in jar files. how do i get ant to recognise all the jar files in the lib folder?

what "server"? J2EE SDK also IS a J2EE server (start and stop it via batch scripts). the only third party product is the Cloudscape database engine from IBM if you like to call it a server.

Problem starting the j2ee server

I am trying to run
j2ee -verbose
and I am getting the following error.
I am running it on Windows 2000
and my environment variables are set like this
set JAVA_HOME=C:\jdk1.3.1_04
set J2EE_HOME=C:\j2sdkee1.3.1
set CLASSPATH=%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\locale;.;
set PATH=%J2EE_HOME%\bin;C:\jdk1.3.1_04\bin;
Did anyone encountered the same problem. Any ideas on how to solve it.
J2EE server listen port: 1050
Naming service started:1050
Binding DataSource, name = jdbc/DB2, url = jdbc:cloudscape:rmi:CloudscapeDB;cre
te=true
Binding DataSource, name = jdbc/EstoreDB, url = jdbc:cloudscape:rmi:CloudscapeD
;create=true
Binding DataSource, name = jdbc/DB1, url = jdbc:cloudscape:rmi:CloudscapeDB;cre
te=true
Binding DataSource, name = jdbc/InventoryDB, url = jdbc:cloudscape:rmi:Cloudsca
eDB;create=true
Binding DataSource, name = jdbc/Cloudscape, url = jdbc:cloudscape:rmi:Cloudscap
DB;create=true
Binding DataSource, name = jdbc/XACloudscape, url = jdbc/XACloudscape__xa
Binding DataSource, name = jdbc/XACloudscape__xa, dataSource = COM.cloudscape.c
re.RemoteXaDataSource@7ecd78
Starting JMS service...
Initialization complete - waiting for client requests
Binding: < JMS Destination : jms/Topic , javax.jms.Topic >
Binding: < JMS Destination : jms/Queue , javax.jms.Queue >
Binding: < JMS Cnx Factory : jms/QueueConnectionFactory , Queue , No properties
>
Binding: < JMS Cnx Factory : QueueConnectionFactory , Queue , No properties >
Binding: < JMS Cnx Factory : TopicConnectionFactory , Topic , No properties >
Binding: < JMS Cnx Factory : jms/TopicConnectionFactory , Topic , No properties
>
Starting web service at port: 8000
Starting secure web service at port: 7000
J2EE SDK/1.3.1
LifecycleException: null.open: java.net.BindException: Address in use: JVM_Bin
d
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
ctor.java:1116)
at org.apache.catalina.startup.Embedded.start(Embedded.java:962)
at com.sun.web.server.WebService.start(WebService.java:217)
at com.sun.web.server.WebServer.start(WebServer.java:189)
at com.sun.enterprise.server.J2EEServer.startWebService(J2EEServer.java:
796)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:297)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
java.lang.RuntimeException: null.open
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:346)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
J2EE server reported the following error: null.open
Error executing J2EE server ...

Same problem here. Looked at the following file and made change: http.port=8001.
C:\j2sdkee1.3.1\config\web.properties
J2EE Server now starts. Thanks to sangineni.

SDM Deployment Failed--SDM could not start the J2EE cluster on the DB Host

HI,
I am trying to deploy ESS packges in EP through SDM.But while deploying I am getting this error in SDM at the start itself:-
Error: An error occured while starting a cluster instance.
Oct 14, 2008 5:14:41 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
Please check if there is an appropriate running cluster instances
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage
I am pasting the full LOG File details:-
Oct 14, 2008 6:32:00 PM Info: Starting cluster instance processes.
Oct 14, 2008 6:32:00 PM Error: An error occured while starting a cluster instance.
Oct 14, 2008 6:32:00 PM Error: There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage . The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
Oct 14, 2008 6:32:00 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Oct 14, 2008 6:32:00 PM Error: Aborted: development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0', grouped by software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
SDM could not start the J2EE cluster on the host SBPEPDB1! The online deployment is terminated.
There is no clutser control instance running on host SBPEPDB1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JM_T1223989073901_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 14, 2008 6:32:04 PM Info: Starting to save the repository
Oct 14, 2008 6:32:05 PM Info: Finished saving the repository
Oct 14, 2008 6:32:07 PM Info: Starting: Initial deployment: Selected software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0' will be deployed.
Oct 14, 2008 6:32:07 PM Error: Aborted: software component 'SAPPCUI_GP'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.13.0.20080516101947''/'0':
Failed deployment of SDAs:
development component 'pcui_gp/isr/cfg'/'sap.com'/'MAIN_ERP05VAL_C'/'2515722'/'0' : aborted
Please, look at error logs above for more information!
I have checked the CONFIGTOOl and the properties seem to be OK.
I tried SHUTTING DOWN all APPLICATION servers & Restarting the DEPLOYMENT,but it still Failed
Pls suggest.
Regards,
Abhijeet
I

Hi George,
Thnx for your reply.
I have stopped all Application servers and kept only the CI-DB instances running.Retried deploying the ESS packages but still getting the same error.
Have checked the Visual admin,it is not in SAFE mode,it working normally.
Have alos checked the CLUSTER Manager Property Values in both Visual Admin & Config Tool,they are alright.
About the Cluster Resources,can you pls specify what exactly do you mean by "Cluster Resources are running or not".
I think if the application servers are stopped,then the Cluster resources shudnt come into play right?? Correct me if I am wrong.
Kindly suggest what other steps I shud take.
Regards,
Abhijeet

How coud i do to deploy a app to the website that shiped by j2ee sdk

i want deploy a app to the website that shiped by j2ee sdk.
i found the "conf" folder under the J2EE_HOME.but the website is have nothing with the file "server.xml" in this folder.
how could i do?
thx

The J2EE 1.4 Tutorial describes how to deploy applications:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/index.html

Trying to start the j2ee to be the JMS provider but why error

Anyone knows why I can't start the j2ee ..which I hope to use it as the JMS provider. I am trying to try the e.g. from JMS tutorial....
But it seems that I can't start the j2ee in the first place 'cos error say that I have another instance running...(but I didn't start anything in the first place). How should I solve this?
How could I stop the j2ee server....I tried the command
j2ee -stop but cannot..
Anyone can help?
AG
G:\jmseg\simple>j2ee -verbose
J2EE server listen port: 1050
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:227)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:227)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:355)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
J2EE server reported the following error: Could not initialize j2ee server. Poss
ible cause could be another instance of the server already running.
Error executing J2EE server ...
G:\jmseg\simple>

I got exactly the same message when I tried to start j2ee server... It worked fine the second time round though, So I suggest you try it again.
tim..

Start the J2EE SDK in the foreground on Windows

Similar Messages

Maybe you are looking for