Start with SQL+ on Windows
Hi,
I'm trying to start SQLPlus on my W'xp 32 and have some confusions how to configure it.
In all help linkgs there is ORACLE_HOME var mentioned but I don't have it and even after I created this it still doesn't work.
there is also tnsnames.ora file used for connection which I don't have.
I downloaded:
instantclient-sqlplus-win32-11.2.0.1.0
instantclient-basic-win32-11.2.0.1.0
I also have sql developer pack intalled on my PC: sqldeveloper-2.1.1.64.45, which works fine with my Oracle db.
All those packs just unzipped and don't require any actual installation, just run .exe from that folder, so I'm not sure how to configure all.
Can anybody guide me how to make sql+ working ?
Tx
Trent
ORACLE_HOME is the variable which is set when you installs the ORACLE in your machine.. at client side or at serverside.
You will have the network folder then admin inside that then you will find the tnsnames.ora and lintener.ora and sqlnet.ora etc.
all these files are used if your server in on the another machine...
if you have installed the oracle run time or server side full without error then you will be able to open the
sql*plus
if still problem then come with the error or problem which you are facing...
Good Luck..
Similar Messages
-
Question
when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, PeterSee this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
Question
When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, PeterSee this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
hi,
1-how many data bases can you create with sql express
2-can you also create data bases in sql 2012 through GUI ,so whitout any knowledge of command line?
3-how many GB support has SQL express?
4- I think this edition is free!
thanks
johan
h.david1-I see you are limited to 1GB per instance ,what if you need more ,is there a way to manipulate it?
I hope you are talking about memotry.To be correct SQL server 2012 and onwards Database engine of Express edition can use MORE THAN 1G memory. Its incorrectly written in books online I tried getting this changed but MS pays little attention on petty things.
If you read this support article
"Starting with SQL Server 2012, these memory limits are enforced only for the database cache (buffer pool). The rest of the caches in the SQL Server memory manager can use much more memory than is specified by these edition limits. For example,
a SQL Server 2012 Express edition can use only a maximum size of 1.4 GB for its database cache. Other caches (such as the procedure cache, the metadata cache, and so on) can consume memory up to the size specified by the "max server memory" configuration."
No you cannot manipulate more than what is provided by Microsoft. Plus we have not put limitation its MS which has put it.
2- in which circumstances you need more than 1GB per instance ,can you give me a little example?
You *might be* able to manage things with just more than 1 G but if you run many queries which does select * and many alter index rebuild this will require excessive memory then your queries will become super slow. What could have finished in 20 mins might
end up taking 3-4 hrs or even give you Out of memory condition
3-I see also you have 10 GB per data base can you manipulate 10 GB and make it more when nedeed?
10 G limit is only for data files the log files can grow much greater than 10 G. In express edition you can have database with 9.9 G data file and 30 G log file. If you need more switch to developer edition it costs just 50 $
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
i decided to buy ibm server with 48 gb ram and two xeon cpu E5 - 2620 2.0 ghz.
i wan to make it as RDP Server for 55 user , SQL server with database (database size is 8 gb) and IIS server(in iis i wan to configure one site which is use data base of sql )
it is possibale to all these things will manage on my server (ibm server with 48 gb ram and two xeon cpu E5 - 2620 2.0 ghz. ) ?
if yes then plz tell me how ?
if no then plz give me proper solutions (What is requirement ?).it as RDP Server for 55 user
RDP for 55 users is not possible only 3-4 users at a timre can connect to windows machine that too also depends on license you take. If 55 users connect to windows machine Via RDP you might get OOM at windows OS level with SQL Server running on it
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Not 'Getting started with SQL server' but 'Getting SQL server started'
As a developer, I hate it when I lose valuable time because Windows 'is not working' and thus I can not work.
I don't know what would be the best forum to post this, please let me know if there is a better one.
Today after, a Windows Update and a reboot SQL server won't start anymore.
The error in the event log:
The SQL Server (MSSQLSERVER) service terminated with the following service-specific error:
An attempt was made to access a socket in a way forbidden by its access permissions.
I stopped the firewall, but the problem remains.
As it is apparently not the firewall I have no idea how to resolve this problem, any suggestions welcome.
Thanks :(
And these are the updates that were installed:
Installation Successful: Windows successfully installed the following update: Definition Update for Windows Defender - KB2267602 (Definition 1.193.2423.0)
Installation Started: Windows has started installing the following update: Definition Update for Windows Defender - KB2267602 (Definition 1.193.2423.0)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3033889)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3035527)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3036612)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3039066)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3018133)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3035132)
Installation Successful: Windows successfully installed the following update: Cumulative Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB3032359)
Installation Successful: Windows successfully installed the following update: Security Update for Internet Explorer Flash Player for Windows 8.1 for x64-based Systems (KB3044132)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3024751)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3035017)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3030377)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3035131)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3035553)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3013172)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3027209)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3030947)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3036228)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3029606)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3034348)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3029803)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3032323)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3022796)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3012235)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3034344)
Installation Successful: Windows successfully installed the following update: Security Update for Windows 8.1 for x64-based Systems (KB3046049)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3012702)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3036562)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3025417)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3024755)
Installation Successful: Windows successfully installed the following update: Update for Windows 8.1 for x64-based Systems (KB3000850)Refer the below similar link
https://social.technet.microsoft.com/Forums/windows/en-US/e0cc1b3e-2c63-451a-abc8-8e1e66a23287/an-attempt-was-made-to-access-a-socket-in-a-way-forbidden-by-its-access-permissions?forum=w7itpronetworking
--Prashanth -
Why dbconsole won't start with emctl in Windows 7
SYSTEM information : windows 7 ultimate WITH Oracle DATABASE 11gR2
I'm connected with a windows user that reside in ora_dba and administrator groups
I execute all commands with "run as administrator"
'administrator' is also in ora_dba group
after installing oracle software I executed dbca to create a new database, but after the creation dbconsole won't run!
emctl start dbconsole gives me An instance of Oracle Enterprise Manager 11g Database Control is already runningand the service 'oracleDbConsoleorcl' is not started, when I start it mannually it gives me windows could not start the service in local computer
so now I know that this errors is caused by a running process, it's the 'java.exe : 5520', I kill it and try to start dbconsole again:
emctl start dbconsole it gives meThe OracleDBConsoleorcl service could not be started
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
and of course the result of >NET HELPMSG 3547 is A service specific error occurred: *** :/
so I tried to recreate the repository but after the creation (successful) the result is the same errors when I want start dbconsole :
emca -config dbcontrol db -repos recreateYou have specified the following settings
Database ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Local hostname ................ localhost
Listener ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ orcl
.... no warning or errors ...
Sep 19, 2012 10:11:13 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING: Error starting Database Control.Please execute the following command(s)
1) Set the environment variable ORACLE_UNQNAME to Database unique name
2) d:\app\oracle\database\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole
but ORACLEUNQNAME is already set !_
C:\Windows\system32>set oracle
ORACLE_HOSTNAME=localhost
ORACLE_SID=orcl
ORACLE_UNQNAME=orcl C:\Windows\system32>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://localhost:1158/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 11g Database Control is already running. //_the same error before I recreate the repos_
C:\Windows\system32>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not Running
Please help
Thankscan you check the same after setting ORACLE_HOME and LD_LIBRARY_PATH=%ORACLE_HOME%/lib.
I am not sure how much this is going to help, just try it.
Once done try to start dbconsole -
Hello!!
I've got two computers, and one of them with ora11g. I can connect to it throught EM, and now I'm wondering how could I launch sql sentences to it.
I could access to the windows 2003 console through remote desktop connection, but I don't know If there are any other way to do it.
Thanks.Sounds like you want to access your 11g database on the 1st PC from the 2nd PC?
As Daniel said, you need an Oracle client drivers - these will provide the communication layer and link between the client and server. I suggest you download the Oracle Instant Client driver set and the SQL*Plus add-on for it. Tiny downloads.
Unzip. Add a TNSNAMES.ORA to the directory and set the TNS_HOME environmental variable to it. Run SQL*Plus and connect to the database in order to throw "sql sentences" at it.
It should be that simply if done correctly. -
Firefox start with the previous Windows and Tabs, even the optin I have chosen is the Homepage.
At start up Firefox does not go to my Homepage
Cor-el, thank you for your support. Unfortunately the same thing happens whether I close by using the x or by using exit in the Firefox Tab. I go to Options and make sure that "Show my home page is chosen in the "when Firefox starts" option box. Between the time I close and when I bring Firefox back up that option gets changed to "Show my Windows and Tabs from last time"
-
Getting started with iSQLPlus on Windows 2000 and Oracle9i?
When I type http://localhost/isqlplus
I get an error message: the web page you requested is not
available offline.
I am able to run OEM Console via web:
http://localhost:3339/
So, HTTP Server is running. and Oracle9i is running.
This is fresh install out of the box (9.0.1.1). Any clues on
what additional steps need to be set up? (doc says it should run
as is)Can you see the default HTTP Server page when you enter
http://localhost/ ?
Is your browser set up to ignore your proxy server for
localhost?
Can you get to iSQL*Plus if you use your ip address instead of
using 'localhost'?
Yes, iSQL*Plus is installed and ready to use by default, or it
should be. If none of the above help, you should probably give
Oracle Support a call and they can work through the problem with
you. If you don't have a Support contract, try posting back here
with as much detail as you can give us, ie, version of your o/s,
which install of Oracle9i, brower versions you've tried, etc.
Alison
iSQL*Plus Team -
When I switched from XP to Windows 8.1, I now cannot drag the new mesaages into folders I had set up. I get the blue bar to drag over, but message doesn't move to folder.
are you dragging the messages to folders in Thunderbird or into the file system on win8
-
Phptoshop CC always starts with window open
Dear reader,
Photoshop always starts with opening a window (grey) at start-up or when closed en re-opened. How can I close this window permenently so that i can see my desktop when closing last Photoshop picture (window).
With kind regards.Sounds like your on a mac and want to turn off the Window>Application Frame
-
Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishalHi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008
Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AMVijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan -
Issue with SQL Developer 4.1 Early Adopter 2 - start sql-script by "@"
Hi,
today i realized, that starting a sql-script by writing @scriptname.sql in a sql worksheet and press F9 to start the script, does not work anymore.
With EA2 there is always an error message shown like "unkown command" with some strange characters "�������������������������������" in the script logging window.
The sql-scripts are located in a filesystem folder the os environment variable SQLPATH points to.
In Version 4.0.x this worked perfect! Is this a planned "feature" or just a bug in EA2 fixed in later EA versions?
In addition, when i open such a sqlscript with the file open menu in sqldeveloper the content of the sqlscript is not shown in the script window. There are only some none printable characters "�����" displayed in the sqlworksheet, and not the "select ..." a normal texteditor shows.
Thanks in advance
MatthiasHi,
with encoding set to utf8 it does not work. Don't know why. After setting the encoding to "cp1252" everything works fine again! Thank you very much!
Matthias
Maybe you are looking for
-
How can I make my iPod sync automatically?
When I first got my iPod I chose for it NOT to sync automatically but I should have. I have no idea how to get back to those settings but want to change it so it syncs on it's own. I've read a few topics here and noticed stuff about Summary tabs but
-
Hoe to resolve stale data error?
Hi All, we are creating a simple UI page using OAF. Our UI contains a Textinput box and a Go button. For any value entered in the text box and Go button is clicked the corresponding value should be fetched from the database and displayed. For Example
-
HT1937 Hi it Samantha brooks here I problem with download my apps with my bank card
Hi I having poblem With add my bank card and I had new handset send out and I try get my apps back you guys block my card .2f <Personal Information Edited by Host>
-
We use OS 9.2.x to copy photos off the camera's SD memory card to an iMac. We then in turn backup the folders and files to an external hard drive. The original dates (create date / modified date) of the folders and photo files are preserved, which is
-
How to use two RPD in a single installation
I have developed separate RPD for the Wholesale business and one for Retail business. How can I use these two with one BI installation