Statistical Cost Centre problem

Hello All,
I have created project in PS (WBS structure). In WBS Basic data tab, I am assigning a Cost Centre.( This Cost Centre will be statistical, as the posting will be done against WBS.
However when i am doing posting againts WBS thru FB50, the actual cost gets posted against WBS. But it is not appearing as Statistical cost against the cost centre in report S_ALR_87013611. However when I maintain a Cost Centre during posting in FB50 along with WBS, the cost appears as statistical cost. Is it a standard behaviour ? or is it possible by some settings to see the statistical postings against CC, even if i am not mentioning it in FB50 and just maintaning it in basic data of WBS?
Please let me know.Thanks in advance.
Thanks
Sarang

Hello,
The way it works is opposite of how you want to use. In the WBS element control tab, you can mark a WBS element as statistical, which means that the WBS element is statistical and choose to post the actual costs to a cost center, which you can enter in the master data. When you post FB50 the WBS will be statistical and cost center will be real.
If you do not mark WBS as statistical then the cost center field in the control tab has no meaning. For a non-statistical WBS when you use in FB50 the actual costs go to WBS and the statistical costs go to cost center, if you enter it.
Regards
Sharabh

Similar Messages

  • STATISTICAL COST ELEMENT PROBLEM

    Hi all,
    following is my problem-:
    i has craeted a 'Statistical Internal Order' in which i assigned a responsible 'Cost Center' n simultaneously i created a 'Primary cost element' & a 'Statistical cost element' under category 90.
    when i m posting a document through T. Code FB50 in which i give above mentioned G.Ls (cost element)& enter the above mentioned 'Statistical internal Order', after hitting the enter button the responsible cost center comes in the cost center column only infront of 'primary cost element' not in front of 'statistical cost element.
    my question is why cost center is ot coming infront of statistical cost element n how it will come.
    thanks in advance
    sandeep

    GL Accounts are always assigned to Real Cost elements and not Statistical Cost element.
    Further when you hit a Statistical Internal order, the GL Account/Real primary cost element would require a real cost object, hence it is popping up the Cost center assigned in the Statistical Internal order which is correct.
    Statistical cost element can't have any Cost center (real) assgined
    Edited by: Suraj Ramamurthy on Dec 1, 2008 1:36 PM

  • Problem while creating cost centre

    hi all ,
    I am trying to create cost centre in t.code ks01 but the error message comes
    ''controlling area vi01 does not have a standard hierarchy(please assign one)'. but i
    i try to assign standard hirarchy in t.code okkp  again the error message comes like  'hierarchy name xxx_cost does not exist.' what is the exact problem
    pls clarify it
    chandra

    You please try by giving simple name like VI01 instead of what you have given, i think the field length should be restricting.
    Please try the above and see its working or not
    best regards
    Message was edited by:
            Emani

  • Account assignment category for cost centre and statistical internal order

    When issuing purchase order, we use account assignment category u2018Fu2019 for (PM) order, and u2018Ku2019 for cost centre.  What account assignment category to use, when issuing purchase order, if we want to charge to both cost centre (as mandatory) and statistical internal order (as optional entry field)?
    Do you create custom account assignment category for that purposes? 
    I reviewed Note 305385 but do not think it's relevant to us.

    Hi Stacy
    you can create a custom acct assgn category (AAC) in OME9... COPY the K to Z and make changes in it
    However, I feel the Std AAC K should serve your purpose if you want to have Cost Ctr as mandatory and Order as Optional
    Br, Ajay M

  • Problem with the cost centre budget is being copied to profit centres 1KE0

    Hi Experts
    I am trying to cost centre budget is being copied to profit centres using transaction code 1KE0. The log displays all entries were successful but does not update the table and i did run foreground and backgound.can any one help me.

    sloved

  • Auth Problem: restricting cost centre in ME21/ME21N

    Hi,
      i need to restrict certain cost centres for some users in tcode ME21/ME21N .Currently there is no check in the programme.We have many plants in our system and many roles for different countries with this transaction.i need to activate this check for one country.How can I achieve this???
    Pls help.
    Thanks,
    Chittaranjan

    Hi Chittaranjan,
    If there is no standard authorisation object currently programmed in ME21 (program SAPMM06E) and ME21N (program RM_MEPO_GUI), I can see two options for you.
    Using either a standard authorisation object or a new authorisation object of your own:
    1) Change the standard code (not really recommended) and insert an AUTHORITY-CHECK statement against the chosen authorisation object.
    2) Investigate the possibility of using a standard user exit (see transaction SMOD). It looks like various exit points are available for SAPMM06E but I don't know how suitable they may be. Check in SMOD for exit names beginning with MM06* and engage a functional analyst to help identify a suitable exit.
    Regards,
    Gary

  • Change to settings on Cost centre master record

    what problems may happen if change the lock indicator settings on cost centre -  currently a flag is in the actual revenues - need to post to this with a cost element set up as 11 revenues (in error) -

    hi
    The locking indicators will works as under
    1. If the locking indicator is on then it will not allow to post revernue. But still this can be posted statistically.
    2. If the indicator is removed then you can post actual values.
    You can change these indicators any time and it will not have any negative impact on old transactions.
    This may help
    Regards
    Shantanu

  • BI FI and Cost Centre Reconciliation

    Hi
    I have a requriement to create a GL reconciliation report between Finance and Cost centre data, i have a multi sitting over the relevant cubes and the data is coming through.
    The report is as follows
                     |_FI Total__|___Cost Centre Total__|__Difference_(should = 0)
    GL Account |                  |                                  |                   
    For the cost centre data the report should bring through the data where the cost element = GL account in the row,
    ie GL Account - 60000
    FI Total - GL Account - 60000
    CC Total - Cost Element - 60000
    Difference - FI - CC
    Any ideas on how i can do this or if this is possible?
    Thanks
    Josh

    Hi Harshal
    Yes i was able to create this report, i had to create an infoobject ZFI_GLCE with 0GL_ACCOUNT as a ref. characteristic.
    Then i created a cube and had transformation going from YCOOM_C02 (CO-OM: Costs and Allocations (Delta Extraction)) to the cube where i mapped the Cost Element to ZFI_GLCE and then also had another transformation from YFIGLO02 (General Ledger: Line Items) to the cube mapping the GL Account to ZFI_GLCE.
    Could you further explain the problem you are having with the GL Accounts?
    Josh

  • Third party gratis order and cost centre allocation

    Hi all
    I have a problem with third party sales. When the sales order is gratis, the cost centre allocation is determined by our gratis order reason. This particular cost centre is locked for invoice receipt posting (as it is gratis), and so we cannot complete the 3rd party process.
    Is there any way around this - I can see in the IMG that you can create requirement classes for costing but I cannot see where you assign these requirements to items.
    Also, I am not sure about the implications of removing the lock on invoice receipt postings.
    Any help would be appreciated.
    Thanks
    Jon

    Please chck with FICO  team wether the cost center is loocked for same ?
    Points if helpfull
    Rg Ajit

  • Cost centre and Profit centre in one query - Authorisations not working!

    Hiya,
    I have another problem related to Analysis Authorisations.
    I have created an AA with Cost Centre and Profit centre access restricted to a certain node of a hierarchy (type 1 - this node and below). For example, the User can only run a query at Cost Centres level of Country Belgium - the query works fine. Now, the user wants to drill down by the relevant Profit centres. According to the log, the system checks for Profit centres like * and says the user is not authorised. All this, despite the fact that all Profit centres belong to country Belgium and user has been given access to see these profit centres.
    What do I need to do to enable drilldown by Profit centre? I can't make a "*" access to Profit centre as the user will be able to run other queries at global level, which is not what I can allow.
    Any suggestions?

    Hello,
    I don't know if it is relevant, but I had a similar problem when I had two characteristic each with hierarchy restrictions in one authorization object.
    I "solved" it by separting each characteristic into its own authorization object.
    BR
    Ondrej

  • RE: Cost centre is not updating in FAGLFLEXT table

    Dear experts,
    During posting we give PSG and cost centre but cost centre is not updating in GL total table FAGLFLEXT as its statistical, in order to be able to update CC in the GL total table what we should activate?
    please advice.
    Regards,
    Chandu.

    Hi Chandu.
    Sadly, this is the standard behavior of the system. In FAGLFLEXT only arrive real cost object, not statistical. This is explained in oss
    964686 - Transfer of statistical postings in CO to FI
    If you really nead the Cost Center, you can enhace table FAGL and and create Z field for statistical cost center. This is a common solution.
    Arturo.

  • Cost Centre Plan data not updating FAGLFLEXT

    Dear Experts,
    In our production environment, our cost centre plan is not updating FAGLFLEXT table. Profit centre plan using GP12N is fine.
    We are using the New GL and have FIN-CCA and FIN-PCA scenario activated.
    Integrated planning is ticked in the planning versions for both Controlling and New GL Plan versions.
    Controlling plan version and New GL plan version have the same name.
    In table Controlling table COSP, I can see the plan data on business transaction type RKP1.
    I expect to see it in FAGLFLEXT with RKP1 but I see no plan values at all.
    In fact, in the previous 3 environments, we have not had this problem and cost centre plan and actual has updated FAGLFLEXT. Only in Production...
    Any suggestions? Help if you can! Thanks alot,
    Deb

    Dear Ravi,
    I don't think this is the problem.
    It seems that:
    - the CC plan was created -> it updated CO tables e.g. COSP -> no update to FAGLFLEXT
    - the CC plan was deleted -> it updated CO tables with negative value -> updated FALFLEXT with negative value
    -the CC plan was update again -> it updated CO table -> updated FAGLFLEXT and balance with negative value is zero
    - the CC plan was deleted again -> it updated CO tabe with negative value -> FAGLFLEXT  is in minus value!
    It seems like somewhere between first and second steps, the scenario FIN-CCA was not behaving like it was active!
    Have you come across this before?
    Thanks!
    Debora

  • Creating a Sub Cost Centre

    Hello
    Does anybody know how to create a sub cost centre. As in a cost centre which is part of/under another main cost centre.
    I would be really greatfull if anybody can help.
    Thank you
    Regards
    Bindi

    You could use a statistical Internal Order for lower level analysis of a Cost Centre.
    We use these for our Schools.
    Each School has one Cost Centre eg: E10030
    And then many Internal Orders which represent the departments eg:-
    ECAT10030   Catering
    EENG10030   English Dept
    EMAT10030   Maths Dept
    Some Schools have over 100 Internal Orders.
    Validations ensure an Internal Order is always used with a School Cost Centre.  No posting can take place against the Cost Centre alone.
    Substituions enter the related Cost Centre for an Internal Order when creating a document.
    The Cost Centre is held against the Internal Order in its Master Record.
    Edited by: Amanda Byrne on Jul 26, 2010 1:26 PM

  • KKBC_ORD report - filtering by Cost Centre

    Hi,
    I was trying to filter KKBC_ORD report for Confirmation Transactions to show only a specified cost centre.
    I set up a filter on cost centre column, but when I specify cost centre and confirm this filtering, it shows no data even though this cost centre is used and can be found in KKBC_ORD report when filter is not set.
    Have you had a similar issue? Is it some kind of program bug? Maybe there is an SAP note to fix that?
    Thank you,
    Karol

    Thank you Ajay,
    Unfortunately KKBC_ORD is being used by our Production Line Coordinators to verify data order by order and they are only interested in confirmations executed on specific cost centres. This is why we need to focus on KKBC_ORD.
    Do you know whether this filtering problem is a program error or is it done on a purpose and has some good explanation?
    For me it seems an error and I thought there would be a fix for it as filtering is a standard functionality.
    Thanks,
    Karol

  • Statistical cost element 90

    Hi,
    Can any one please help me to understand the statistical cost element 90. I have created asset reconciliation account as statistical cost element. I come to know this will help to track the budgeting. But i don't have clear idea.
    Can any one help me undertand what is the purpose and how it functions in tracking the budgetsin CO??
    Regards,
    Deva

    Hi Phaneendra,
    Thank you for your reply. Still i having few more queries. I have created the Internal order as statistical order. Budgeting also done. While creating the PO i have given both AUC and Internal order as account ssignement reference. In this case the cost centre will get update throw cost center from Asset master. The Internal order gets statisticlly updated throw direct assignement in the PO.
    In my understanding the budget will be updated throw inernal order assignemet in the PO. If that is the case what is the statistical cost element role here??
    But in the case of project system we have created the real WBS element and not the statistical WBS. while creating the PO we are giving WBS element as the account assignment and its get updated in the budget. While settlement, value from WBS element will be settled to AUC and then from AUC to main asset.
    Can you please help me to understand the statistical cost element functionality here??? If my above understanding is wrong please excuse me.
    Regards,
    Deva

Maybe you are looking for