Status control icon display in table control

Hi,
In the workarea the field of status control icon is showing Red/green/yellow that is ok but when i am modifying the internal table from this work area then text(Red or green something...) is coming insted of status Icon.
So how to modify internal table from this workarea so that i can display icon in my table control's internal table ?Your input is highly appreciated..
Thanx
Prince Raja

DATA : c_green(4) TYPE c VALUE '@08@',
       c_red(4) TYPE c VALUE '@0A@'.
      IF flag = 'X'.
        READ TABLE it_output INTO is_output WITH KEY
                                  bukrs = is_final-bukrs
                                  anln1 = is_final-anln1
                                  anln2 = is_final-anln2
                                  BINARY SEARCH.
        IF sy-subrc = 0.
          is_output-c_icon = c_green.
          is_output-leabg_n = is_final-leabg.
          is_output-message = it_return-message.
* Modify the output internal table with the changed new values
          MODIFY it_output FROM is_output
                           TRANSPORTING c_icon leabg_n message
                           WHERE bukrs = is_output-bukrs
                             AND anln1 = is_output-anln1
                             AND anln2 = is_output-anln2.
        ENDIF.
Regards
Gopi

Similar Messages

Add change Icon in the Table Control tool bar.

Hi Abapers,
I need to add "change" icon in the table control. I added it but when I click on it is not working.
My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
plz give me any reference prg or sample code.
Thanks
Nani.

Hi Nani,
Track the function code of change icon in user command. if it is clicked then put a flag eq X.
check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
try this code:
in PBO:
LOOP AT SCREEN
IF WS_EDIT = 'X'
SCREEN-INPUT = 1
ELSE
SCREEN-INPUT = 0
ENDIF
MODIFY SCREEN
ENDLOOP
Hope it will work fine
Regards
Krishnendu

How to display internal table content to table control

hi experts
 I am very new to dialog programming
 I have the Internal table in a report program containing data that needs to be displayed in table control.
 Can you explain in step by step.
 Thanks in advance.
Regards
Rajaram

Hi Raja
Dialog-driven programs, or any program started using a transaction code, are known as SAP transactions, or just transactions. The term "transaction" is used in several different contexts in the IT world. In OLTP (Online Transaction Processing), where several users are working in one system in dialog mode, the term "transaction" stands for a user request. In conjunction with database updates, it means a change in state in the database.
Programs with type M can only be started using a transaction code, in which an initial screen is defined. Programs with type 1 can be started either using a transaction code, or by entering the program name in one of the transactions SE38 or SA38. Screens call dialog modules in the associated ABAP program from their flow logic. Type M programs serve principally as containers for dialog modules, and are therefore known as module pools. Type 1 programs, or function modules can also switch to dialog mode by calling screens using the CALL SCREEN statement. The program code of the corresponding executable program or function pool must then contain the corresponding dialog modules.
Programs that are partially or wholly dialog-driven cannot be executed in the background. They are therefore sometimes referred to as dialog programs.
Transaction code
The transaction code starts a screen sequence. You create transaction codes in the Repository Browser in the ABAP Workbench or using Transaction SE93. A transaction code is linked to an ABAP program and an initial screen. As well as using a transaction code, you can start a screen sequence from any ABAP program using the CALL SCREEN statement.
Screens
Each dialog in an SAP system is controlled by one or more screens. These screens consist of a screen mask and its flow logic. Since the flow logic influences the program flow, screens are sometimes referred to as "dynamic programs". You create screens using the Screen Painter in the ABAP Workbench. Each screen belongs to an ABAP program.
The screen has a layout that determines the positions of input/output fields and other graphical elements such as checkboxes and radio buttons. The flow logic consists of two parts:
Process Before Output (PBO). This defines the processing that takes place before the screen is displayed.
Process After Input (PAI). This defines the processing that takes place after the user has chosen a function on the screen.
All of the screens that you call within an ABAP program must belong to that program. The screens belonging to a program are numbered. For each screen, the system stores the number of the screen which is normally displayed next. This screen sequence can be either linear or cyclic. From within a screen chain, you can even call another screen chain and, after processing it, return to the original chain. You can also override the statically-defined next screen from within the dialog modules of the ABAP program.
GUI status
Each screen has a GUI status. This controls the menu bars, standard toolbar, and application toolbar, with which the user can choose functions in the application. Like screens, GUI statuses are independent components of an ABAP program. You create them in the ABAP Workbench using the Menu Painter.
ABAP Program
Each screen and GUI status in the R/3 System belongs to one ABAP program. The ABAP program contains the dialog modules that are called by the screen flow logic, and also process the user input from the GUI status. ABAP programs that use screens are also known as dialog programs. In a module pool (type M program); the first processing block to be called is always a dialog module. However, you can also use screens in other ABAP programs, such as executable programs or function modules. The first processing block is then called differently; for example, by the runtime environment or a procedure call. The screen sequence is then started using the CALL SCREEN statement.
Dialog modules are split into PBO modules and PAI modules. Dialog modules called in the PBO event are used to prepare the screen, for example by setting context-specific field contents or by suppressing fields from the display that are not needed. Dialog modules called in the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
Passing Data Between ABAP Programs and Screens
How are fields from ABAP programs displayed on the screen? And how is user input on the screen passed back to the ABAP program? Unlike in list programming, you cannot write field data to the screen using the WRITE statement. Instead, the system transfers the data by comparing the names of screen fields with the names of the ABAP fields in the program. If it finds a pair of matching names, the data is transferred between the screen and the ABAP program. This happens immediately before and immediately after displaying the screen.

Field Attributes
For all screen fields of a dialog screen, field attributes are defined in the Screen Painter. If a field name in the screen corresponds to the name of an ABAP Dictionary field, the system automatically establishes a reference between these two fields. Thus, a large number of field attributes for the screen are automatically copied from the ABAP Dictionary. The field attributes together with data element and domain of the assigned Dictionary field form the basis for the standard functions the screen executes in a dialog (automatic format check for screen fields, automatic value range check, online help, and so on).
Error Dialogs
Another task of the screen processor is to conduct error dialogs. Checking the input data is carried out either automatically using check tables of the ABAP Dictionary or by the ABAP program itself. The screen processor includes the error message into the received screen and returns the screen to the user. The message may be context-sensitive, that is, the system replaces placeholders in the message text with current field contents. In addition, only fields whose contents is related to the error and for which a correction may solve the error can accept input. See also Messages on Screens.

Data Consistency
To keep data consistent within complex applications, ABAP offers techniques for optimizing database updates that operate independent of the underlying database and correspond to the special requests of dialog programming. See also Programming Database Updates.
TRANSACTION CODES
MENU PAINTER : SE 41.
SCREEN PAINTER : SE 51 .
BOTH : SE 80 .
 ONLY EXISTING PROGRAMS CAN BE VIEWED IN SE 41 , SO USE SE 38 .
CONCEPT :
STEPS :
1. GIVE TRANSACTION CODE SE 38 , CREATE A REPORT NAMED
" ZVRPRDIALOGTEST2 " . SAVE , CHECK , ACTIVATE IT .
2. THEN GIVE CODE SE 51. GIVE SAME PROGRAM NAME AS SE38 .
GIVE SCREEN NUMBER , PRESS CREATE .
3. GIVE SHORT DESCRIPTION . THEN CLICK ELEMENT LIST .
4. THE SCREEN COMES , TYPE " OKCODE " .
5. CLICK FLOW LOGIC , THE SCREEN COMES .
6. one screen will come.
7. SAVE . CHECK , ACTIVATE .
8. CLICK LAYOUT . SCREN PAINTER SCREEN COMES .
9. PRESS " F6 " . TYPE TABLE NAME , PRESS ENTER . THE SCREEN COMES .
10 . TO SELECT THE DESIRED FIELDS , CLICK THE " TO SELECT " AREA IN
EACH ROW , PRESS ENTER .
11 . AFTER CLICKING , PRESS ENTER .
12. THE FINAL SELECTION WIL COME
13 . GIVE THE NESSARY BUTTONS IN THE SCREEN PAINTER .
14 . DOUBLE CLICK IN EACH BUTTON GIVE LABLE , FUNCTION CODE .
15 . THE FINAL SCREEN WIL COME
16 . SAVE . CHECK .ACTIVATE. TO CHECK SCREEN PRESS F8.
17 . TO WRITE CODING : PRESS FLOW LOGIG .
18 . THE SCREEN COMES .
19 . DOUBLE CLICK FIRST EVENT ( MODULE STATUS _ 3000 ).
20 . PBO MODULE WINDOW COMES , PRESS TICK MARK .
21 . EDITOR COMES . SAVE .
TYPING PROGRAM IN THE EDITOR
Steps :
THE EDITOR WILL BE AS SHOWN ABOVE , NOW TYPE THE FOLLOWING CODE .
NOTE :
BEFORE TYPING CODE : TAKE COMMENTS FROM , THEN TYPE LIKE :
SET PF_STATUS ' PRSTATUS '
SET TITLEBAR 'PRTITLE' .
*& Module STATUS_3000 OUTPUT
* text
TABLES : ZVTIKFS.
DATA BEGIN OF INT_TAB OCCURS 0.
INCLUDE STRUCTURE ZVTIKFS.
DATA END OF INT_TAB.
DATA OKCODE LIKE SY-UCOMM.
DATA INDEX TYPE I VALUE 1.
* MODULE STATUS_3000 OUTPUT *
MODULE STATUS_3000 OUTPUT.
SET PF-STATUS 'PRSTATUS'. "COMMENTS TOOK
SET TITLEBAR 'PRTITLE1'. " COMMENTS TOOK
SELECT * FROM ZVTIKFS INTO TABLE INT_TAB.
READ TABLE INT_TAB INDEX INDEX.
ZVTIKFS-NAME = INT_TAB-NAME.
ZVTIKFS-ADDRESS = INT_TAB-ADDRESS.
ZVTIKFS-PHONE = INT_TAB-PHONE.
ZVTIKFS-AREA = INT_TAB-AREA.
ENDMODULE. " STATUS_3000 OUTPUT
*& Module USER_COMMAND_3000 INPUT
* text
MODULE USER_COMMAND_3000 INPUT.
CASE OKCODE.
WHEN 'INS'.
INSERT ZVTIKFS.
WHEN 'DEL'.
DELETE ZVTIKFS.
WHEN 'PRE'.
INDEX = INDEX - 1.
IF INDEX < 1.
INDEX = 1.
ENDIF.
WHEN 'NEX'.
INDEX = INDEX + 1.
IF INDEX > SY-DBCNT.
INDEX = SY-DBCNT.
ENDIF.
WHEN 'EXI'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_3000 INPUT
NEXT :
SAVE , CHECK , ACTIVATE .
TO COME TO DESIGN MENU
STEPS :
1 . TRANSACTION CODE : SE 80 . OBJECT NAVIGATOR WINDOW COMES .
NOTE : IF YOUR REOORT DOSENOT COME DO THE FOLLOWING PROCESS
Vey useful link:http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Other links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb2d40358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/10/e7dbde82ba11d295a40000e8353423/content.htm
For Screens
http://help.sap.com/saphelp_47x200/helpdata/en/e4/2adbef449911d1949c0000e8353423/content.htm
Screen elements
http://help.sap.com/saphelp_47x200/helpdata/en/47/e07f5f2b9911d2954f0000e8353423/content.htm
Processing Screens
http://help.sap.com/saphelp_47x200/helpdata/en/47/e07f682b9911d2954f0000e8353423/content.htm
Complex Screen elements
http://help.sap.com/saphelp_47x200/helpdata/en/fd/02da2a61d811d295750000e8353423/content.htm
DIALOG Programming
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html
Reward all helpfull answers
Regards
Pavan

How to display a table control in a report

hi
how to display a table control in a report

create a screen in your report.
Call that screen in your report.
While designing your screen, use Table control creation wizard to create table control on that screen.
http://www.planetsap.com/online_pgm_main_page.htm

How to display a table data on Screen having a Table control

Hi ,
I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this regard.

Hi Gayatri,
After creating table control do the following steps.
1. In the flow logic section write the following code:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
LOOP AT I_LIKP WITH CONTROL LIKP_DATA CURSOR LIKP_DATA-CURRENT_LINE.
MODULE ASSIGN_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.
LOOP AT I_LIKP.
ENDLOOP.
I_LIKP is the internal table which is used to display table data in the table control.
2. In Process Before Output, in the module STATUS_0200 write the following code:
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
In Process After Input, in the module USER_COMMAND_0200 write the following code:
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
In Process Before Output and in the module ASSIGN_DATA which is there inside the loop write the following code:
MOVE-CORRESPONDING I_LIKP TO LIKP.
So, Totally your flow logic code should be like this.
TABLES: LIKP, LIPS.
DATA: BEGIN OF I_LIKP OCCURS 0,
       VBELN LIKE LIKP-VBELN,
       ERNAM LIKE LIKP-ERNAM,
       ERZET LIKE LIKP-ERZET,
       ERDAT LIKE LIKP-ERDAT,
       MARK TYPE C VALUE 'X',
      END OF I_LIKP,
      BEGIN OF I_LIPS OCCURS 0,
       VBELN LIKE LIPS-VBELN,
       POSNR LIKE LIPS-POSNR,
       WERKS LIKE LIPS-WERKS,
       LGORT LIKE LIPS-LGORT,
      END OF I_LIPS,
      FILL TYPE I.
CONTROLS: LIKP_DATA TYPE TABLEVIEW USING SCREEN 200,
          LIPS_DATA TYPE TABLEVIEW USING SCREEN 300.
DATA: COLS LIKE LINE OF LIKP_DATA-COLS.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'LIKP'.
   SELECT VBELN
          ERNAM
          ERZET
          ERDAT
          FROM LIKP
          INTO TABLE I_LIKP
          WHERE VBELN = LIKP-VBELN.
   IF I_LIKP[] IS INITIAL.
     CALL SCREEN 200.
   ENDIF.
WHEN 'EXIT'.
   LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module assign_data OUTPUT
      text
MODULE ASSIGN_DATA OUTPUT.
MOVE-CORRESPONDING I_LIKP TO LIKP.
ENDMODULE.                 " assign_data OUTPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
Save and Activate the program along with the screen in which you have included table control.
Hope this will help you.
Regards
Haritha.

How to control the display of table control

hi,
If I dont find any entry in the internal table to be displayed in table control then I should not display the blank table in the screen.
I tried using if not itab[] is initial in PBO but there(PBO) 'if' is not recognised and it gives syntax error.
Even if I tried to put the code of table control 'loop at itab[] into wa_tab contrl....'this part in a module and there to put the If condition it gives error to put where after wa_tab.
Thanks,
mohan

hi,
As i told i had put the if part in the module but then it is the error with syntax check of table control as shown below
PBO
module pbo_100.
loop at itab into wa with contril Tc cursor tc-lines.
endloop
pai
module pai_100
but here if i create a new module in PBO say module check_table and put the code for table control as
if not itab is initial
loop at itab into wa with contril Tc cursor tc-lines.
endloop
endif.
then here error comed with syntax of loop at itab into wa has to be 'where' condition.
So the problem is i dont want to display the table control in 1st but after some input on the screen then only the table control is to be displayed .
Let me know if this is clear.
thanks,
mohan

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Performance check for status control table

Hi,
When ever we activate any ODS or delete the request ,a message 'Performance Check for Status control Table ' appears.
What does it mean?Please explain what is status control table and how it performs?
Thanks & Regards,
Dinakar.

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Field Status control for fields at Account assignment level .

Hi All ,
I have to take care of enabling / disabling / hiding / making fields mandatory for some of the standard and custom fields for SC and PO depending on the Account assignment value .
I am not sure how to go about this .
I think this has to do something with the field status control .
SPRO -> IMG -> SRM sever -> cross application basic settings -> extension and field control ( personalization ) -> Configure control for fields of substructure .
I think i have to define some dyn class and also methods .
But not sure how to move ahead , how to declare class / methods , which super class to use , how will i get the req parameters for the methods , ...
Will appreciate a lot if somebody can guide me on this .
Regards,
Ambar Patil.

Hi ,
Check in SPRO for SRM -> Extensions and Field Control (Personalization) -> Configure Field Control.
The metadata configuration for enabling disabling actions/fields in SRM can be checked from the tables
This contains the data for all the business objects
Check in SM30 the following views:
/SAPSRM/V_MDA_HD for Header actions
/SAPSRM/V_MDA_IT for Item Actions
/SAPSRM/V_MDF_HD for header fields
/SAPSRM/V_MDF_IT fir IT fields.
You can customize your logic for enabling diabling the actions or fields by maintaining the entries in the corresponding customer views for this data
for e.g.
/SAPSRM/V_MDF_HC for header customer fields
/SAPSRM/V_MDF_IC for item customer fields
You need to maintain field enabled, disabled ,required based on your requirement.
Regards,
Neeraj

CATS-Time Entry Plant/Status/Control Key

Hi All,
We have a situation when we enter time in Cross application time sheets under an Activity type & Network We get the following error message:
May i know why and where could be this error and how I can resolve it.
Check: Plant/Status/Control Key This is the error I get
Steps Done: Went to CAT2>> For a person entered Activity Type and Network & Time>> Hit Enter and I get above error.
Thanks in advance for help
Gopi

CN27 is for collective confirmation. In your earlier post you had mentioned that you are getting the error while using CATS. Check the status of the activity for which the confirmation is being entered. Run transaction CN22, enter the network number and click on the activity icon (green rectangle). Now check the system status of this activity. If it is closed it wont allow you to post any confirmations. Get in touch with your PS consultant if you face any issue in doing whats mentioned above.
Next time when you post a query be sure that you are aware about the details of the issue. This will help in addressing the issue properly.

Does material status control MRP running?

Hi experts
May I just check if material status could conrol the MRP running? LIke we setup some parts as Y0- obsolete. but we found it still could generate Pr or Plan order....
So does material status control the MRP running? Could we let obsolete part not run by MRP?
Thanks
Alice

Hi,
In addition to Mr.Brahmankar mentioned ways, you can exclude material from MRP run by selecting Procurement Type as No Procurement in MRP-2 View in Material Master.
Also you can select X-plant / Plant specific Material status as :
01 Blocked for procment/whse to block materila from MRP run.
Hope this helps.
Revert if any doubt.
Regards,
Tejas

Material Status Control

Hi All
I create a new transaction type in inventory and Check Status Control to enable material status control for this transaction type. but it is not apper on Material Status Control form.also i set the profile option INV: Material Status Support to yes
cooperation will be greatly appreciated
Essam

Hi,
In addition to Mr.Brahmankar mentioned ways, you can exclude material from MRP run by selecting Procurement Type as No Procurement in MRP-2 View in Material Master.
Also you can select X-plant / Plant specific Material status as :
01 Blocked for procment/whse to block materila from MRP run.
Hope this helps.
Revert if any doubt.
Regards,
Tejas

Display an icon in a table column

Hi,
can i display an icon in a table column ? How
do I have to handle that ?
Thank you...
Claus

Hi Claus,
You can use the following as table cell editor:
1. Image -- just displays plain image
2. Caption -- dislays image along with text or image only (or text only).
3. LinkToAction -- same as caption, however provides you a way to have something like "onClick" action.
Regards,
VS

Remove status "control recipe created"

Hi
I have a problem with a process order, this was canceled after confirmation and now i can't change to Tecnically complete because the status "Control Recipe Created" i can't remove. I verify the message status on CO54 and i don't have pending to be sent..
How i can correct this?

Hi,
First send the control recipe to process control system through CO53. then delete the PI sheet as per the procedure mentioned below. Once done you can change the status of process order to TECO..
Control Recipe/PI sheet deletion procedure
Thanks
Kumar

Status control icon display in table control

Similar Messages

Maybe you are looking for