Status is red for request in monitor

Hai all
I am getting status as red for the request in the manage screen of data source after scheduling info package( for the request) but I can see data in psa can any one help
thanks
chaithanya

Hi,
check in Status tab--there will be a short dump..then go to ST22.
and also
Go to SM37 ..check for your JOB name and user
and find your job..it will be cancelled.. double click your job and read the job log (pencil on document).
there will be a some error.SYNTAX Error.
loading from flat file??
Regards,
San!

Similar Messages

QM & Technical Status are RED thouh request is running

Hi,
I have one request which is running even now-- (load to ODS)
in the monitor the request is running but in the manage tab of the data target both traffic lights of technical And QM status were RED!
Before the load was scheduled i had changed the ODS settings to see the QM status automatically and activate the ODS data data automatically.
This is very huge dataload and if there is anything wrong then i need to change it immedietly ! it takes nearly 40 hours to finsih this load--
Should there anything to change or is it OK?
Raj

Hi Raj
In General the moment you made the Qm status to RED it is
automatically stop all the related jobs or process in some
pecular cases you to kill the process via SM 50 . Just conatc t
your BASIS people immdeiately on this and ask themn to kill
the process related to the request.
And do the rest of the process like deltion of the request or
what ever...
Hope it helps you ..!
Cheers
K M R
Assigning points is the only way of saying thanx in SDN***
>
Raj Karan wrote:
> Hi,
>
> I have one request which is running even now-- (load to ODS)
>
> in the monitor the request is running but in the manage tab of the data target both traffic lights of technical And QM status were RED!
>
> Before the load was scheduled i had changed the ODS settings to see the QM status automatically and activate the ODS data data automatically.
>
> This is very huge dataload and if there is anything wrong then i need to change it immedietly ! it takes nearly 40 hours to finsih this load--
>
> Should there anything to change or is it OK?
>
> Raj

Monitor status As Red

Hi,
Why we are making the status as red in monitor before deleting the red request in data target.
Thanks
karuna

Hi,
If the update mode is "Delta" we need to follow this procedure so that the system recognises the next incoming Delta would not be normal delta but "Repeat Delta".
Repeat Delta means it picks up the data of previous delta(the one which has been deleted) as well as any new delta records.
Anup.

Import Items Request remain in Status Pending Normal For a Long Period

Hi,
Import Items Concurrent Requests Remain in Status Pending Normal For a Long Period(30 minutes) Before Running.
It is actually completing within 10 minutes after pending normal for 30 minutes.
This problem is happening only with Import Items concurrent request, Other request are running as soon as they started.
My Application version: 12.1.3
Database Version:11.1.0.7
My Standard Manager details Processes=16 Sleep Time=10 Cache=40
Please correct, If there is need to change Standard Manager configuration...
Plz reply soon.
Regards,
Alig

Alig,
Standard Manager is running this request, Import Item program request after the completion, creating Item categories for this it is taking time, that is the reason another import items request is waiting for the Item categories program to be completed.You need to find out why the "Item Categories" takes that long to complete.
Do you have the statistics up to date?
Enable trace as per these docs to find out why the request takes that long.
How to Set a Trace with Bind and Waits from the Concurrent Request Form [ID 601647.1]
How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
Thanks,
Hussein

Alert for status changed in Service request CRM

Dear All,
We have a requirement where if the status is changed for a service request, an alert should appear in the context area of the interaction center warning the user of this modification.
I have tried to used the Alerts Configuration in the business role of IC_MANAGER to do this, can i do this only with customizing or do i need any development?
Thanks for all your input.
Best Regards,
João Gaifém

Hi,
As no standard event is raised when changing the status, you could do the following.
Create a Z event (in SPRO, Customer Relationship Management->Interaction Center WebClient->Additional Functions-> Intent-Driven Interactions Define Events in Repository).
Then, you could enhance the view in which the status is managed.
If you want the alert to be shown when selecting the status, create an event handler for the attribute (if not existing already).
In this event handler, call the Z event you just created.
The code should look like :
DATA : lr_event TYPE REF TO cl_crm_ic_event,
lr_event_srv TYPE REF TO if_crm_ic_event_srv.
CREATE OBJECT lr_event.
lr_event->set_name( 'ZSTATUS_CHANGED' ). “Name of event created
lr_event_srv = cl_crm_ic_services=>get_event_srv_instance( ).
lr_event_srv->RAISE( lr_event ).
Then, create your own IDI rule, so that when the Z event is raised, an alert should be displayed.
Hope this can help you.
Sylvain

Getting error "The request failed with HTTP status 401: Unauthorized " for _vti_bin/Authentication.asmx

Hi All,
My Web application is FBA application and I am using the lists.asmx services in my custom webpart. To run this lists.asmx service in FBA enabled site we need to use Authentication.asmx service..
I referred this link:
http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/21867e28-75d5-42c8-850b-bfb5c5894eed .
I wrote a code as mentioned in this article but now I am getting error "The request failed with HTTP status 401: Unauthorized " for Authentication.asmx service itself. Can somebody help me why it is not working even everything looks
correct?
Thank you.
Regards,
Rahul Shinde.

Hi Rahul,
Give permissions to the user on the web application.
Central Admin -->Application Management --> Application Security -->Policy for web application --> Select the
web application --> Add User
For more information, refer to
http://microsoftdev.blogspot.com/2009/10/sharepoint-web-services-access-give.html
http://www.codeproject.com/Articles/24244/Access-a-Forms-Based-SharePoint-Site-s-Web-Service
Best Regards.
Kelly Chen
TechNet Community Support

STATUS YELLOW FOR REQUEST

Hai all
I am getting status yellow for request in bi after scheduling info package ( after migeration of data source)
and in short dump of dataware house work bench I am getting following error : CONNE_IMPORT_WRONG_COMP_TYPE
EXCEPTION :CX_SY_IMPORT_MISMATCH_ERROR
AND TEXT OF ERROR AS ( ERROR WHEN ATTEMPTING TO IMPORT OBJECT " HIST2 " )
THANKS
CHAITHANYA

Hi,
Check is there any Start/Individual routines(ABAP) are there? Usally i occurs when exception raise.Try to debug the update rule solve your problem.
Regards,
Saran

XI runtime Cache status showing red in Tcode SXI_CACHE

Hi,
After i installed XI the installation is successfull and everything is working except Cache.
I had checked the RFC destination INTEGRATION_DIRECTORY_HMI and it is working fine .
but the problems are
1>SXI_CACHE XI runtime Cache status is red .when i click on display cache trigger it is giving error mesage"JCO.ERROR JCO.SERVER cannot find function 'SAI_CAC"
2>http://host:50000/CPACache/refresh?mode=full is giving error message "THE RESOURCE REQUEST DOESNOT EXIST"
3>In http://host:50000/CPACache/monitor.jsp
when i refresh i get an error page which says the cache was not initialized to central access
Please can any one help me on this

1.Goto integration builder and goto "Tools" -->Cache notifications.
If you see anything in red try to refresh the cache for that item.
2. Also in SXI_CACHE txn goto menu bar and "START Complete Cache Refresh in Background" and "Delta Cache Refresh".
this should take care of this.
CPA Cache: Have you defined a user for this? there should be xidiruser to do this.
Thanks
Ashish

Snapshot agent showing red mark in replication monitor!!!(Merge replication)

few days before snapshot agent showing red mark in replication monitor without any changes...
synchronizing from publisher to subscribe working fine...
and how to clean up snapshot agent job history...
plz give me a solution...
Thanks in advance.......

error:
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
snapshot agent showing red mark...
Hi Baraiya Kirit,
According to the error message, the issue could be caused by that the agent is busy or the agent cannot log in to one of the computers in the topology.
To troubleshoot this issue, please perform the following steps. For more details, please review this article:
MSSQL_ENG020554.
• If the agent has stopped, please restart it and check if the error still occurs.
• If this error is raised frequently because the agent is busy:
You might need to redesign your application so that the agent spends less time processing.
You can increase the interval at which agent status is checked using the Job Properties dialog box.
• If an agent cannot log in to one of the computers in the topology:
We recommend that the -LoginTimeOut value be set lower than the interval at which the replication agent checkup job runs.
There is also a similar blog for your reference.
http://maginaumova.com/the-replication-agent-has-not-logged-a-progress-message-in-10-minutes/
Thanks,
Lydia Zhang

Showing Red flag in Message Monitor

Hi All,
I am getting red flags in Message Monitor while send from SAP through RFC.
If i click the flag, showing message "Column status could not process - Transaction Execution Terminated Upon Request"
previously its worked properly. In last process we have send at a time 150 message to message listener, in that it has processed 100 messages successful and rest of them show in red flag.
After that even i send single message also, its getting red flag.
And how can we reprocess those messages
Can anyone please let me know how to solve it.
Thanks,
Kind Regards,
Praveen Reddy M
Edited by: praveen2425 on Mar 7, 2012 8:17 AM

Hi ,
I have found that error where it has been terminating.
I have kept condition action block below the sql insert query in my transaction as i am calling from Message process rule.
Under condition action block, i have kept leftside SAP jco and rightside stop action block
If the query successful execute it will trigger SAP jco, if not it will trigger stop transaction(i.e. In stop configure. link, mapped sql query success to TerminationMessage)
The issues is,
if i send 150 messages, its inserting all records in DB but in the transaction it triggering 100 messages to SAP Jco through condition after that its triggering stop action block. I don't no why its happen.
In condition i have kept
confg. object as 1 and radio button with or
Confg link as sql query success with input1 propertie
Any idea regarding this, why its triggering after sometimes even its successful executed.
Thanks,
Kind Regards,
Praveen Reddy M

Managing Request without Monitor Log: APO Request or Terminated Request Gen

Hello Everyone,
Need some help of managing a system created DTP named Request without Monitor Log: APO Request or Terminated Request Generation. This is like a staging DTP provided by SAP to support data loads to DSO or Cube and, it's good if the process goes smoothly.
However when we encountered unnecessary error such as tables space or memory problem, this particular job will get stuck and there's no way to move forward or backwards from this point. There were some answers to delete the request from RSICCONT, but I don't see the direct relations here, or maybe I'm wrong.
My only question - Have anyone any idea on how to work around this.
The last thing I've in hand is to delete the whole thing (requests) and re-do from start (extraction). Not a pleasant thing as this DSO feeds to 2 Cube & 1 DSO and then to another Cube.
Thanking everyone in advance.
Regards,
Azmadi

Hi,
sad to knw you had to delete the whole data and reload. I faced the same issue today and here is what i did,
when you go to the reconstruction tab, you will find 2 ticks present
1st one that tells if request is available in data target and
2nd which gives the transfer structure status.
Now, if the first check is crossed it could mean 2 things....data no longer exists in data target or data was not updated to data target these are 2 different things.
So, in your case it wud have sed data was not updated to the target.
Solution, just reconstruct that request and then in the request tab mark it red and delete again since you dont need it.... then the activation through process chain will not fail.

Request without Monitor Log:

HI Frds,
When i am deleteing a req. from ODS, i am not able delete the Req. I Req. status is in Red and tech. status also in Red. Its showing DTP/Infopackage as "Request without Monitor Log: APO Request or Terminated Request Generation" and not able to see the Moniter(RSMO).
Kindly can one give me some solution to delete these type req. ?
Thanks
Pari

Hi,
Apply the recommendation of the above note:
1138410-->execute the report RSSM_ZOMBIE_REQUEST_DELETE before checking if you do not have entries in the table RSSELDONE or the table RSMONMESS but which may be displayed in the administration of a
data target with the descriptive text "Request without monitor log: APO request or terminated request creation".
I hope it helps.
Best regards,
Fran.

"CREATE_ENQUEUE_FAILED" Import for request NGDK900094 already running.

Hi guys,
While i was trying to import some requests into my quality system, i chose the requests five each and continued with the import. on refreshing the truck sign for these requests do not turn to yellow. Now i want to import all my requests in sequence and when i get to the running requests it gives the error: CREATE_ENQUEUE_FAILED "Import for request NGDK900094 already running". When i refresh the requests wont turn yellow and i need to import again.
Any ideas on how i can resolve this?.
Basisman.
Edited by: Basisman on Mar 23, 2010 10:22 AM

Hi,
Check at OS level if tp and R3trans processes are still active and running ? I guess they are running.
KIll these active processes and make sure no old tp and R3trans remains active. Then click refresh again and wait for the truck to terminate. once they terminate retry the import.
By chance if the running status doesnot terminated, go to import monitor, there you can see the running imports. right click on the running imports one by one and then delete status.
In both the cases make sure no tp and R3trans should remain active from old processes.
Best Regards
Niraj

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Why is there no scaling for high resolution monitors in Adobe Bridge CC?

Why is there no scaling for high resolution monitors in Adobe Bridge CC?
Photoshop CC, Illustrator CC and Indesign CC have 200% scaling for high resolution monitors in their preferences panel but Bridge CC does not, when will this feature be added to Bridge CC Adobe???

qsea wrote:
Why is there no scaling for high resolution monitors in Adobe Bridge CC?
Photoshop CC, Illustrator CC and Indesign CC have 200% scaling…
Inconsistency between or among applications in the artificial "suites" should come as no surprise.
The "suite" concept is a fabrication of Adobe marketing and bean-counting types. The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

Status is red for request in monitor

Similar Messages

Maybe you are looking for