Status Management Issue.

Dear Friends,
I have maintained 2 statuses( IA(Inwork) & RL(Released)) in status Network for a Document Info Reocrd. But when I change the status of Document Info record from Inwork to Released, again system is allowing to change status to Inwork, which I don't want.
My requirement is client should not be allowed for any status change after the status has been set to Released. I have not maintained any "Previous status" field under the status network configuration.( i.e. Control Data->Define Doc types->Select Doc Type->Define Document Status->Attributes--->Prev.1.)
Can anybody give useful suggestion........
with regards,

Resolved.

Similar Messages

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Error-IM258-Object does not exist (Status Management)

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan

l have same problem my code below
help me please .
if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
        TITLEBAR       = 'E-mail'
        TEXT_QUESTION = 'E-mail Göndermek istiyormusunuz ?'
      IMPORTING
        ANSWER         = answer
      EXCEPTIONS
        TEXT_NOT_FOUND = 1
        OTHERS         = 2.
if answer eq 1 and ulke = 'TR'.
lt_mailtxt ='Değerli Müşterimiz,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt =''.
APPEND lt_mailtxt.clear lt_mailtxt.
data: it_packing_list like sopcklsti1 occurs 0 with header line,
       it_receivers like somlreci1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes.
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'sinan.tataroglu@***.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[]
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
elseif ulke ne 'TR' and answer eq 1.
lt_mailtxt ='Dear Customer,'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
APPEND lt_mailtxt.clear lt_mailtxt.
lt_mailtxt = 'Thanks for your complaint.'.
APPEND lt_mailtxt.clear lt_mailtxt.
gd_doc_data-doc_size = it_packing_list-body_num * 255.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = 'Naksan KGM'.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table lt_mailtxt lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
CLEAR it_receivers.
it_receivers-receiver = email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            sender_address             = 'peykan.samli@****.com'
            sender_address_type        = 'INT'
            commit_work                = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = lt_mailtxt[] "it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
IF sy-subrc EQ 0.
COMMIT WORK.
Push mail out from SAP outbox.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.

Error-IM258-This refers to an error in central status management.

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 11:10 AM
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 2:28 PM

Dear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar

Error Message : Object does not exist (status management)

Hi Gurus,
I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
1. Order level,
2. Notification,
3. Task level validations.
In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
Now the issue is :
Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
Is anyone aware of this error message, any suggestions are highly appreciated.
Thanks in advance.
Shrikant
Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

Hi ,
You have posted this question long back that is one and half year back nearly.
You got an error message in IW52 stating Object does not exist ( status management ).
Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

Equipment serial number status management

Hello All,
I have a case:
We have the status management of the equiment serial number for instrument.
Material number: 8000001
Equipment Number: 300026058
Serial Number:Q090909
Each goods movement will update the status and the stock information of the equipment, and the specifically operation can be done at each status.
We had purchased this equiment from a affiliated company,and it had been sent to the consignment storage location, but two weeks ago,our logistic team returned an equiment to the vendor with this serial number Q090909, and the relevant status have been updated accordingly, now the system still show us there is an equiment at the customer side(due to we don't issue the consignment pick up order to get the physical goods from the customer), so we have to finish the consignment pick up order process,but due to the status issue of the serial number, we can't handled the equiment.
And also we can't change the status with the transaction IQ02.
Is there any other way to solve this problem?
Thanks&Regards,
Don

Hi Don,
If you have authorization then follow the steps given below
Go to SE16 --> Table "JEST"
There you have to enter the "Object number"
Generally object number is like "IE0000000000XXXXXXXX"
*XXXXXXXX = Equipment number
If its not taking by the system then run JEST freely and see the pattern of object number and then enter your object number
In my case I have found that the last eight number was Equipmnt number.
Once you enter then on next screen, you will see 5 fields
Client Object number Status Status Inact. Change number
In change mode put "X" in status Inact for every entry except the two givn below
I0184
I0188
Regards,
MT

Power management issue USB 2.0 Root Hub

82801EB USB 2 Enhanced host controller .
USB 2.0 Root Hub
Power management issue.
The check box of the Function (Allow the computer to turn off this device to save power) Remains always unchecked , it does not matter if you check it , in the next check in the properties window it will be unchecked again .
My problem is that my system does not hibernate if I set time more than 15 minutes or so.
The system stays-On for ever, I have check for software issues, but everything looks normal, at my search for power management problems in drivers, I found this issue, with the USB 2 controller.
I have unplug any USB device from it, and the power management status does not change also.
The INTEL driver file is very fresh, 29/4/2004.
Does any one have any ideas, Beta driver or other solution?

Well i think that i found my real problem , even if the above issue is not 100% responsible for my troubles .
The AVAST antivirus was blocking the hibernation , by one function called as ( On acces file check ) .
I did disable it , and my system now hibernates .
The point is that even now , i am not 100% certen that the system will act corectly its and every time .
But at list i did a good step on the corect direction.

Project Server 2010 - Change Status Manager

End Goal: We would like to perform this change via SQL statement - which I believe I have I feel like I am missing something and not sure what it is.
Background: We migrated from a different product to Project Server 2010, while our team members were assisting users to move their projects from the old application to Project 2010 they did not realize their names would appear as status
managers.
The quick solution would be to tell the owners of the projects to change the information themselves (republish or go in themselves and change every line); however we feel this can be cumbersome and too much work due to having hundreds of projects and there
are thousands of fields that need to be modified. I can quickly accomplish what I want with an UPDATE command and be done with it (no user involvement).
What I am running into in my test environment is that I can modify the fields (query below) to the appropriate status manager, but I cannot get the changes to appear in Project Professional - it still shows the old value.
I have used the following command to change the Status Manager to the Project Owner (I'm new to SQL, and we no longer have a DBA - so if my code isnt the greatest...I'll fix it)
USE ProjectServer_ReportingUPDATE MSP_EpmTaskSET TaskStatusManagerUID = MSP_EpmProject.ProjectOwnerResourceUIDFROM MSP_EpmProjectWHERE MSP_EpmTask.ProjectUID = MSP_EpmProject.ProjectUID
This modifies all the values correctly - Project Owners become the Status Manager in SQL
Question: Is there something I am missing or can do OR I am not doing to make this new value show up? Is there a better way to do this from an administrative point of view, with no customer/user interaction?
Your help is greatly appreciated
Thank You
kbwrecker

Merely my personal opinion having been a Project Server 2010 admin in a medium-sized corporation:
I think you are going to seriously do some damage if you go about trying to modify SQL tables behind Project Server's back. There are a LOT of operations that go into a simple "publish" and I doubt that the minor changes you want to make will account for
all of them. Are you confident you're adjusting all of the values necessary? You may have a detrimental impact on in-flight approvals, timesheets, projects, tasks, assignments.. There is just far too much IMO.
Believe me, I know it is not an ideal solution to have the business make their own adjustments. However sometimes it is just what has to be done. My vote is to craft brief instructions and send them out to the PMs. It's easy to do, they can change one row
and then drag the field down like in Excel to edit all the rest; it's a 1-minute operation, max.
Due to the nature of the field, (not being something you can edit via PWA, and even in Project Pro it only allows you to change it to yourself or another current Status Mgr) I think you'll have a hard time scripting this one via macro etc.. However if you
do find a way, seriously keep in mind your scope and don't edit them all at once, it will need to kick off publishes and check-ins for all the affected projects.
Good luck!

Power Mac G5 DP1.8GHz - Bad Logic Board or Power Management Issue?

I have a Power Mac G5 DP1.8GHz/1.5GB/80GB which I bought non-working. It has not yet been disassembled or examined by a certified tech. This is it's issue (which replicates): the computer powers on. It makes a single warning tone, then the LED flashed at least 15 times (too fast to count). Then the posting chord is heard. Hard drive spins up. Then nothing (no video). Won’t boot from any disk. I have changed the RAM and tested the RAM banks with known-to-be-good RAM from another DP1.8GHz G5. The warning tone stopped once or twice after this switch, but then it didn’t chime. I changed the PRAM battery, but not with as new one. However, after installing the used one and then resetting the PMU, it displayed video briefly for the first time. While installed in the other 1.8GHz G5, the hard drive was formatted, given a clean install of OS X 10.4.11, and then moved into this computer where is never mounts. The computer is not accessible through TDM.
Do I have a bad logic board? Bad CPUs? A power managment issue? A RAM issue?

Through my own trial and error troubleshooting, I have found the CPUs to be in good working order and the logic board passes the Apple Service Diagnostic every time. Despite the installation of numerous pairs of modules that worked in another DP1.8GHz, the computer has a RAM issue-it gives the "no good RAM" tone most of the time when it powers up (after a PMU reset it does not). Also the computer boots from disk or into Open Firmware but the disk utility can't see either hard drive so I may have a bad SATA controller.

Color Management issues with Illustrator

Can someone help me figure out the color management issues I'm getting when printing on an Epson 3880 from Illustrator?
The image comes out severely red as evident on the face. I'm not getting the same problem when printing from Photoshop, even though I set same paper profile in printing dialog box.
I attached two printed picture (one from Photoshop CC, and one from Illustrator CC) that I took with my iphone so that you can see the printed result. Even when I try to simulate same thing using illustrator soft proofing process, the soft proof does not show me anything close to how it gets printed out. And I tried all device simulations to see if any would match it. Im using CMYK SWOP v2 for Color space in both programs.

Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou

Event creation with status management

Hello esteemed gurus ... it's your friendly workflow noob again
It seems once people get a sniff that there is a someone who knows a bit about workflow in the company, everyone wants a piece of you!
So... I have been asked to setup a workflow that will trigger when a user changes a user status on an SD contract. I've done some reading and I believe I'm nearly there but need a little help ...
I have setup event creation with transaction BSVZ for object category VBK, specified my status profile, and business object BUS2034 and I'm using the event "CHANGED", within this I have set a status restriction to particular status of my user status profile.
In my workflow definition I have specified the start event "CHANGED" for my business object BUS2034.
The thing is, the workflow starts for every change to the contract, whereas I was expecting it to only start when the particular status I defined in my status management was set in the contract header.
Are there any additional settings I need to make in order to restrict the starting conditions of the this workflow?
Many thanks once again.
Neil

Hi Neil,
There is two options to restrict the workflow.
First one is start condition. You can check the workflow log. If your required field is populated in the Workflow container you can use start condition to restrict the workflow. In the Basic data of workflow template, Start condition is there. You can use the condition editor to set the condition.
If your field is not populated by default, then you can use check function module for this. You need to create one FM, and in transaction swe2, the FM needs to be Configured. The concept is, based on the Sales document number you can get the required field and check the condition inside the FM. If the condition satisfied just leave it. The workflow will be triggered. If the condition is not satisfied raise a Exception. So that the Workflow will not be triggered.
Thanks,
Viji.

CRM ORDER CHANGE AND STATUS MANAGEMENT - workflow

Hi,
We have created a Changed method for bus2000120 which is configured to fire when the Order is saved via Status Management. We have added an entry to BSVW for the object, bus2000120.changed with no restrictions. We have also created a function module that checks to see if the user status is E0005 or E0007 or it deletes the object from the Event table. I see that this works correctly, however, a given SAVE of a transaction is firing 2 bus2000120.changed for the exact same user and system status. (I know that it is firing 2 bus2000120.changed because I ran swels and swel. The event was listed twice. Please remember that the Event table when read directly after the save only lists bus2000120.changed one time.)
There is only 1 entry in the event linkage(swetypv) for bus2000120.changed and it has a condition of the same user status, e0005 or e0007. No real problem here, however, since there were 2 firings it runs the workflow twice.
When you look at the extras-change documents you can see that the Header is changed twice, once for a system status and once for the user status. I am assuming that since there are 2 changes, this is what is doing both firings.
The funny thing is that if I fall into our custom code in debug where we are reading the status and event tables I only see bus2000120.changed.
Any ideas on how I might solve this problem? Do you believe I am correct in assuming that the 2 status changes to the header of the transaction is how both events are being fired? If not, any guidance you might give would be greatly appreciated.

see post stream, solved via sap note 1063138

Status manager field report in pwa 2010

From Ms project or project server I am trying to get a report on status managers on tasks.
is there a way I can get status managers listed on the tasks in a report other than Opening all projects individually?

I got a Sample template which looks almost same called Projects and assignments
we can add status manager field there. Below is the query
SELECT MSP_EpmProject_UserView.ProjectUID as [ProjectUID], MSP_EpmProject_UserView.ProjectName as [ProjectName],
MSP_EpmProject_UserView.ProjectAuthorName as [ProjectAuthorName], MSP_EpmProject_UserView.ProjectOwnerResourceUID as [ProjectOwnerResourceUID],
MSP_EpmProject_UserView.ProjectStartDate as [ProjectStartDate], MSP_EpmProject_UserView.ProjectFinishDate as [ProjectFinishDate],
MSP_EpmProject_UserView.ProjectStatusDate as [ProjectStatusDate], MSP_EpmProject_UserView.ProjectManagerName as [ProjectManagerName], MSP_EpmProject_UserView.ProjectType
as [ProjectType], MSP_EpmProject_UserView.ProjectWorkspaceInternalHRef as [ProjectWorkspaceInternalHRef], MSP_EpmProject_UserView.ProjectWbsIsStale
as [ProjectWbsIsStale], MSP_EpmProject_UserView.ProjectEarnedValueIsStale as [ProjectEarnedValueIsStale], MSP_EpmProject_UserView.ProjectRollupsAreStale
as [ProjectRollupsAreStale], MSP_EpmProject_UserView.ProjectHierarchyNotSynchronized as [ProjectHierarchyNotSynchronized], MSP_EpmProject_UserView.ProjectCalculationsAreStale
as [ProjectCalculationsAreStale], MSP_EpmProject_UserView.ProjectGhostTaskAreStale as [ProjectGhostTaskAreStale], MSP_EpmProject_UserView.ProjectCurrency
as [ProjectCurrency], MSP_EpmProject_UserView.ResourcePlanUtilizationType as [ResourcePlanUtilizationType], MSP_EpmProject_UserView.ResourcePlanUtilizationDate
as [ResourcePlanUtilizationDate], MSP_EpmProject_UserView.ProjectCreatedRevisionCounter as [ProjectCreatedRevisionCounter], MSP_EpmProject_UserView.ProjectModifiedRevisionCounter
as [ProjectModifiedRevisionCounter], MSP_EpmProject_UserView.ProjectCreatedDate as [ProjectCreatedDate], MSP_EpmProject_UserView.ProjectModifiedDate
as [ProjectModifiedDate], MSP_EpmProject_UserView.ProjectCalendarDuration as [ProjectCalendarDuration], MSP_EpmProject_UserView.ParentProjectUID as
[ParentProjectUID], MSP_EpmProject_UserView.ProjectFixedCost as [ProjectFixedCost], MSP_EpmProject_UserView.ProjectCost as [ProjectCost],
MSP_EpmProject_UserView.ProjectOvertimeCost as [ProjectOvertimeCost], MSP_EpmProject_UserView.ProjectActualCost as [ProjectActualCost],
MSP_EpmProject_UserView.ProjectActualOvertimeCost as [ProjectActualOvertimeCost], MSP_EpmProject_UserView.ProjectWork as [ProjectWork],
MSP_EpmProject_UserView.ProjectOvertimeWork as [ProjectOvertimeWork], MSP_EpmProject_UserView.ProjectActualWork as [ProjectActualWork], MSP_EpmProject_UserView.ProjectActualOvertimeWork
as [ProjectActualOvertimeWork], MSP_EpmProject_UserView.ProjectDurationVariance as [ProjectDurationVariance], MSP_EpmProject_UserView.ProjectStartVariance
as [ProjectStartVariance], MSP_EpmProject_UserView.ProjectFinishVariance as [ProjectFinishVariance], MSP_EpmProject_UserView.ProjectDuration as [ProjectDuration],
MSP_EpmProject_UserView.ProjectActualDuration as [ProjectActualDuration], MSP_EpmProject_UserView.ProjectActualStartDate as [ProjectActualStartDate],
MSP_EpmProject_UserView.ProjectActualFinishDate as [ProjectActualFinishDate], MSP_EpmProject_UserView.ProjectPercentCompleted as [ProjectPercentCompleted],
MSP_EpmProject_UserView.ProjectPercentWorkCompleted as [ProjectPercentWorkCompleted], MSP_EpmProject_UserView.ProjectACWP as [ProjectACWP],
MSP_EpmProject_UserView.ProjectBCWP as [ProjectBCWP], MSP_EpmProject_UserView.ProjectBCWS as [ProjectBCWS],
MSP_EpmProject_UserView.ProjectSPI as [ProjectSPI], MSP_EpmProject_UserView.ProjectTCPI as [ProjectTCPI], MSP_EpmProject_UserView.ProjectVAC
as [ProjectVAC], MSP_EpmProject_UserView.ProjectEAC as [ProjectEAC], MSP_EpmProject_UserView.ProjectCostVariance as [ProjectCostVariance],
MSP_EpmProject_UserView.ProjectCV as [ProjectCV], MSP_EpmProject_UserView.ProjectCPI as [ProjectCPI], MSP_EpmProject_UserView.ProjectEarlyFinish
as [ProjectEarlyFinish], MSP_EpmProject_UserView.ProjectEarlyStart as [ProjectEarlyStart], MSP_EpmProject_UserView.ProjectLateFinish as [ProjectLateFinish],
MSP_EpmProject_UserView.ProjectLateStart as [ProjectLateStart], MSP_EpmProject_UserView.ProjectSV as [ProjectSV],
MSP_EpmProject_UserView.ProjectWorkVariance as [ProjectWorkVariance], MSP_EpmProject_UserView.ProjectBudgetCost as [ProjectBudgetCost],
MSP_EpmProject_UserView.ProjectBudgetWork as [ProjectBudgetWork], MSP_EpmProject_UserView.ProjectResourcePlanWork as [ProjectResourcePlanWork], MSP_EpmProject_UserView.ProjectRegularCost
as [ProjectRegularCost], MSP_EpmProject_UserView.ProjectRemainingCost as [ProjectRemainingCost], MSP_EpmProject_UserView.ProjectRemainingOvertimeCost
as [ProjectRemainingOvertimeCost], MSP_EpmProject_UserView.ProjectActualRegularCost as [ProjectActualRegularCost], MSP_EpmProject_UserView.ProjectRemainingRegularCost
as [ProjectRemainingRegularCost], MSP_EpmProject_UserView.ProjectRegularWork as [ProjectRegularWork], MSP_EpmProject_UserView.ProjectRemainingWork
as [ProjectRemainingWork], MSP_EpmProject_UserView.ProjectRemainingOvertimeWork as [ProjectRemainingOvertimeWork], MSP_EpmProject_UserView.ProjectActualRegularWork
as [ProjectActualRegularWork], MSP_EpmProject_UserView.ProjectRemainingRegularWork as [ProjectRemainingRegularWork], MSP_EpmProject_UserView.ProjectRemainingDuration
as [ProjectRemainingDuration], MSP_EpmProject_UserView.ProjectCVP as [ProjectCVP], MSP_EpmProject_UserView.ProjectSVP as [ProjectSVP],
MSP_EpmProject_UserView.ProjectOwnerName as [ProjectOwnerName], MSP_EpmProject_UserView.ProjectCount as [ProjectCount],
MSP_EpmProject_UserView.ProjectBaseline0Cost as [ProjectBaseline0Cost], MSP_EpmProject_UserView.ProjectBaseline0FixedCost as [ProjectBaseline0FixedCost],
MSP_EpmProject_UserView.ProjectBaseline0Work as [ProjectBaseline0Work], MSP_EpmProject_UserView.ProjectBaseline0BudgetCost as [ProjectBaseline0BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline0BudgetWork as [ProjectBaseline0BudgetWork], MSP_EpmProject_UserView.ProjectBaseline0StartDate as [ProjectBaseline0StartDate],
MSP_EpmProject_UserView.ProjectBaseline0FinishDate as [ProjectBaseline0FinishDate], MSP_EpmProject_UserView.ProjectBaseline0Duration as [ProjectBaseline0Duration],
MSP_EpmProject_UserView.ProjectBaseline1Cost as [ProjectBaseline1Cost], MSP_EpmProject_UserView.ProjectBaseline1FixedCost as [ProjectBaseline1FixedCost],
MSP_EpmProject_UserView.ProjectBaseline1Work as [ProjectBaseline1Work], MSP_EpmProject_UserView.ProjectBaseline1BudgetCost as [ProjectBaseline1BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline1BudgetWork as [ProjectBaseline1BudgetWork], MSP_EpmProject_UserView.ProjectBaseline1StartDate as [ProjectBaseline1StartDate],
MSP_EpmProject_UserView.ProjectBaseline1FinishDate as [ProjectBaseline1FinishDate], MSP_EpmProject_UserView.ProjectBaseline1Duration as [ProjectBaseline1Duration],
MSP_EpmProject_UserView.ProjectBaseline2Cost as [ProjectBaseline2Cost], MSP_EpmProject_UserView.ProjectBaseline2FixedCost as [ProjectBaseline2FixedCost],
MSP_EpmProject_UserView.ProjectBaseline2Work as [ProjectBaseline2Work], MSP_EpmProject_UserView.ProjectBaseline2BudgetCost as [ProjectBaseline2BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline2BudgetWork as [ProjectBaseline2BudgetWork], MSP_EpmProject_UserView.ProjectBaseline2StartDate as [ProjectBaseline2StartDate],
MSP_EpmProject_UserView.ProjectBaseline2FinishDate as [ProjectBaseline2FinishDate], MSP_EpmProject_UserView.ProjectBaseline2Duration as [ProjectBaseline2Duration],
MSP_EpmProject_UserView.ProjectBaseline3Cost as [ProjectBaseline3Cost], MSP_EpmProject_UserView.ProjectBaseline3FixedCost as [ProjectBaseline3FixedCost],
MSP_EpmProject_UserView.ProjectBaseline3Work as [ProjectBaseline3Work], MSP_EpmProject_UserView.ProjectBaseline3BudgetCost as [ProjectBaseline3BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline3BudgetWork as [ProjectBaseline3BudgetWork], MSP_EpmProject_UserView.ProjectBaseline3StartDate as [ProjectBaseline3StartDate],
MSP_EpmProject_UserView.ProjectBaseline3FinishDate as [ProjectBaseline3FinishDate], MSP_EpmProject_UserView.ProjectBaseline3Duration as [ProjectBaseline3Duration],
MSP_EpmProject_UserView.ProjectBaseline4Cost as [ProjectBaseline4Cost], MSP_EpmProject_UserView.ProjectBaseline4FixedCost as [ProjectBaseline4FixedCost],
MSP_EpmProject_UserView.ProjectBaseline4Work as [ProjectBaseline4Work], MSP_EpmProject_UserView.ProjectBaseline4BudgetCost as [ProjectBaseline4BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline4BudgetWork as [ProjectBaseline4BudgetWork], MSP_EpmProject_UserView.ProjectBaseline4StartDate as [ProjectBaseline4StartDate],
MSP_EpmProject_UserView.ProjectBaseline4FinishDate as [ProjectBaseline4FinishDate], MSP_EpmProject_UserView.ProjectBaseline4Duration as [ProjectBaseline4Duration],
MSP_EpmProject_UserView.ProjectBaseline5Cost as [ProjectBaseline5Cost], MSP_EpmProject_UserView.ProjectBaseline5FixedCost as [ProjectBaseline5FixedCost],
MSP_EpmProject_UserView.ProjectBaseline5Work as [ProjectBaseline5Work], MSP_EpmProject_UserView.ProjectBaseline5BudgetCost as [ProjectBaseline5BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline5BudgetWork as [ProjectBaseline5BudgetWork], MSP_EpmProject_UserView.ProjectBaseline5StartDate as [ProjectBaseline5StartDate],
MSP_EpmProject_UserView.ProjectBaseline5FinishDate as [ProjectBaseline5FinishDate], MSP_EpmProject_UserView.ProjectBaseline5Duration as [ProjectBaseline5Duration],
MSP_EpmProject_UserView.ProjectBaseline6Cost as [ProjectBaseline6Cost], MSP_EpmProject_UserView.ProjectBaseline6FixedCost as [ProjectBaseline6FixedCost],
MSP_EpmProject_UserView.ProjectBaseline6Work as [ProjectBaseline6Work], MSP_EpmProject_UserView.ProjectBaseline6BudgetCost as [ProjectBaseline6BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline6BudgetWork as [ProjectBaseline6BudgetWork], MSP_EpmProject_UserView.ProjectBaseline6StartDate as [ProjectBaseline6StartDate],
MSP_EpmProject_UserView.ProjectBaseline6FinishDate as [ProjectBaseline6FinishDate], MSP_EpmProject_UserView.ProjectBaseline6Duration as [ProjectBaseline6Duration],
MSP_EpmProject_UserView.ProjectBaseline7Cost as [ProjectBaseline7Cost], MSP_EpmProject_UserView.ProjectBaseline7FixedCost as [ProjectBaseline7FixedCost],
MSP_EpmProject_UserView.ProjectBaseline7Work as [ProjectBaseline7Work], MSP_EpmProject_UserView.ProjectBaseline7BudgetCost as [ProjectBaseline7BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline7BudgetWork as [ProjectBaseline7BudgetWork], MSP_EpmProject_UserView.ProjectBaseline7StartDate as [ProjectBaseline7StartDate],
MSP_EpmProject_UserView.ProjectBaseline7FinishDate as [ProjectBaseline7FinishDate], MSP_EpmProject_UserView.ProjectBaseline7Duration as [ProjectBaseline7Duration],
MSP_EpmProject_UserView.ProjectBaseline8Cost as [ProjectBaseline8Cost], MSP_EpmProject_UserView.ProjectBaseline8FixedCost as [ProjectBaseline8FixedCost],
MSP_EpmProject_UserView.ProjectBaseline8Work as [ProjectBaseline8Work], MSP_EpmProject_UserView.ProjectBaseline8BudgetCost as [ProjectBaseline8BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline8BudgetWork as [ProjectBaseline8BudgetWork], MSP_EpmProject_UserView.ProjectBaseline8StartDate as [ProjectBaseline8StartDate],
MSP_EpmProject_UserView.ProjectBaseline8FinishDate as [ProjectBaseline8FinishDate], MSP_EpmProject_UserView.ProjectBaseline8Duration as [ProjectBaseline8Duration],
MSP_EpmProject_UserView.ProjectBaseline9Cost as [ProjectBaseline9Cost], MSP_EpmProject_UserView.ProjectBaseline9FixedCost as [ProjectBaseline9FixedCost],
MSP_EpmProject_UserView.ProjectBaseline9Work as [ProjectBaseline9Work], MSP_EpmProject_UserView.ProjectBaseline9BudgetCost as [ProjectBaseline9BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline9BudgetWork as [ProjectBaseline9BudgetWork], MSP_EpmProject_UserView.ProjectBaseline9StartDate as [ProjectBaseline9StartDate],
MSP_EpmProject_UserView.ProjectBaseline9FinishDate as [ProjectBaseline9FinishDate], MSP_EpmProject_UserView.ProjectBaseline9Duration as [ProjectBaseline9Duration],
MSP_EpmProject_UserView.ProjectBaseline10Cost as [ProjectBaseline10Cost], MSP_EpmProject_UserView.ProjectBaseline10FixedCost as [ProjectBaseline10FixedCost],
MSP_EpmProject_UserView.ProjectBaseline10Work as [ProjectBaseline10Work], MSP_EpmProject_UserView.ProjectBaseline10BudgetCost as [ProjectBaseline10BudgetCost],
MSP_EpmProject_UserView.ProjectBaseline10BudgetWork as [ProjectBaseline10BudgetWork], MSP_EpmProject_UserView.ProjectBaseline10StartDate as [ProjectBaseline10StartDate],
MSP_EpmProject_UserView.ProjectBaseline10FinishDate as [ProjectBaseline10FinishDate], MSP_EpmProject_UserView.ProjectBaseline10Duration as [ProjectBaseline10Duration],
MSP_EpmTask_UserView.TaskUID as [TaskUID], MSP_EpmTask_UserView.TaskParentUID as [TaskParentUID],
MSP_EpmTask_UserView.FixedCostAssignmentUID as [FixedCostAssignmentUID], MSP_EpmTask_UserView.TaskName as [TaskName], MSP_EpmTask_UserView.TaskIndex
as [TaskIndex], MSP_EpmTask_UserView.TaskIsOverallocated as [TaskIsOverallocated], MSP_EpmTask_UserView.TaskIsProjectSummary as [TaskIsProjectSummary],
MSP_EpmTask_UserView.TaskOutlineLevel as [TaskOutlineLevel], MSP_EpmTask_UserView.TaskOutlineNumber as [TaskOutlineNumber],
MSP_EpmTask_UserView.TaskIsMilestone as [TaskIsMilestone], MSP_EpmTask_UserView.TaskIsCritical as [TaskIsCritical], MSP_EpmTask_UserView.TaskIsSummary
as [TaskIsSummary], MSP_EpmTask_UserView.TaskFixedCost as [TaskFixedCost], MSP_EpmTask_UserView.TaskActualFixedCost as [TaskActualFixedCost],
MSP_EpmTask_UserView.TaskCost as [TaskCost], MSP_EpmTask_UserView.TaskOvertimeCost as [TaskOvertimeCost],
MSP_EpmTask_UserView.TaskActualCost as [TaskActualCost], MSP_EpmTask_UserView.TaskActualOvertimeCost as [TaskActualOvertimeCost], MSP_EpmTask_UserView.TaskWork
as [TaskWork], MSP_EpmTask_UserView.TaskOvertimeWork as [TaskOvertimeWork], MSP_EpmTask_UserView.TaskActualWork as [TaskActualWork],
MSP_EpmTask_UserView.TaskActualOvertimeWork as [TaskActualOvertimeWork], MSP_EpmTask_UserView.TaskDurationVariance as [TaskDurationVariance],
MSP_EpmTask_UserView.TaskStartVariance as [TaskStartVariance], MSP_EpmTask_UserView.TaskFinishVariance as [TaskFinishVariance],
MSP_EpmTask_UserView.TaskTotalSlack as [TaskTotalSlack], MSP_EpmTask_UserView.TaskFreeSlack as [TaskFreeSlack], MSP_EpmTask_UserView.TaskDuration
as [TaskDuration], MSP_EpmTask_UserView.TaskDurationString as [TaskDurationString], MSP_EpmTask_UserView.TaskActualDuration as [TaskActualDuration],
MSP_EpmTask_UserView.TaskStartDate as [TaskStartDate], MSP_EpmTask_UserView.TaskStartDateString as [TaskStartDateString],
MSP_EpmTask_UserView.TaskFinishDate as [TaskFinishDate], MSP_EpmTask_UserView.TaskFinishDateString as [TaskFinishDateString],
MSP_EpmTask_UserView.TaskDeliverableStartDate as [TaskDeliverableStartDate], MSP_EpmTask_UserView.TaskDeliverableFinishDate as [TaskDeliverableFinishDate],
MSP_EpmTask_UserView.TaskActualStartDate as [TaskActualStartDate], MSP_EpmTask_UserView.TaskActualFinishDate as [TaskActualFinishDate], MSP_EpmTask_UserView.TaskPercentCompleted
as [TaskPercentCompleted], MSP_EpmTask_UserView.TaskPercentWorkCompleted as [TaskPercentWorkCompleted], MSP_EpmTask_UserView.TaskPhysicalPercentCompleted
as [TaskPhysicalPercentCompleted], MSP_EpmTask_UserView.TaskACWP as [TaskACWP], MSP_EpmTask_UserView.TaskBCWP as [TaskBCWP],
MSP_EpmTask_UserView.TaskBCWS as [TaskBCWS], MSP_EpmTask_UserView.TaskLevelingDelay as [TaskLevelingDelay], MSP_EpmTask_UserView.TaskPriority
as [TaskPriority], MSP_EpmTask_UserView.TaskSPI as [TaskSPI], MSP_EpmTask_UserView.TaskTCPI as [TaskTCPI],
MSP_EpmTask_UserView.TaskVAC as [TaskVAC], MSP_EpmTask_UserView.TaskDeadline as [TaskDeadline], MSP_EpmTask_UserView.TaskDurationIsEstimated
as [TaskDurationIsEstimated], MSP_EpmTask_UserView.TaskEAC as [TaskEAC], MSP_EpmTask_UserView.TaskIsEffortDriven as [TaskIsEffortDriven],
MSP_EpmTask_UserView.TaskIsExternal as [TaskIsExternal], MSP_EpmTask_UserView.TaskIsRecurring as [TaskIsRecurring],
MSP_EpmTask_UserView.TaskCostVariance as [TaskCostVariance], MSP_EpmTask_UserView.TaskCV as [TaskCV], MSP_EpmTask_UserView.TaskCPI as [TaskCPI],
MSP_EpmTask_UserView.TaskEarlyFinish as [TaskEarlyFinish], MSP_EpmTask_UserView.TaskEarlyStart as [TaskEarlyStart],
MSP_EpmTask_UserView.TaskLateFinish as [TaskLateFinish], MSP_EpmTask_UserView.TaskLateStart as [TaskLateStart], MSP_EpmTask_UserView.TaskSV
as [TaskSV], MSP_EpmTask_UserView.TaskWorkVariance as [TaskWorkVariance], MSP_EpmTask_UserView.TaskIgnoresResourceCalendar as [TaskIgnoresResourceCalendar],
MSP_EpmTask_UserView.TaskClientUniqueId as [TaskClientUniqueId], MSP_EpmTask_UserView.TaskIsMarked as [TaskIsMarked],
MSP_EpmTask_UserView.TaskIsActive as [TaskIsActive], MSP_EpmTask_UserView.TaskIsManuallyScheduled as [TaskIsManuallyScheduled],
MSP_EpmTask_UserView.TaskWBS as [TaskWBS], MSP_EpmTask_UserView.TaskCreatedRevisionCounter as [TaskCreatedRevisionCounter], MSP_EpmTask_UserView.TaskModifiedRevisionCounter
as [TaskModifiedRevisionCounter], MSP_EpmTask_UserView.TaskCreatedDate as [TaskCreatedDate], MSP_EpmTask_UserView.TaskModifiedDate as [TaskModifiedDate],
MSP_EpmTask_UserView.TaskBudgetCost as [TaskBudgetCost], MSP_EpmTask_UserView.TaskBudgetWork as [TaskBudgetWork],
MSP_EpmTask_UserView.TaskResourcePlanWork as [TaskResourcePlanWork], MSP_EpmTask_UserView.TaskHyperLinkFriendlyName as [TaskHyperLinkFriendlyName],
MSP_EpmTask_UserView.TaskHyperLinkAddress as [TaskHyperLinkAddress], MSP_EpmTask_UserView.TaskHyperLinkSubAddress as [TaskHyperLinkSubAddress],
MSP_EpmTask_UserView.TaskRegularCost as [TaskRegularCost], MSP_EpmTask_UserView.TaskRemainingCost as [TaskRemainingCost], MSP_EpmTask_UserView.TaskRemainingOvertimeCost
as [TaskRemainingOvertimeCost], MSP_EpmTask_UserView.TaskActualRegularCost as [TaskActualRegularCost], MSP_EpmTask_UserView.TaskRemainingRegularCost
as [TaskRemainingRegularCost], MSP_EpmTask_UserView.TaskRegularWork as [TaskRegularWork], MSP_EpmTask_UserView.TaskRemainingWork as [TaskRemainingWork],
MSP_EpmTask_UserView.TaskRemainingOvertimeWork as [TaskRemainingOvertimeWork], MSP_EpmTask_UserView.TaskActualRegularWork as [TaskActualRegularWork],
MSP_EpmTask_UserView.TaskRemainingRegularWork as [TaskRemainingRegularWork], MSP_EpmTask_UserView.TaskRemainingDuration as [TaskRemainingDuration],
MSP_EpmTask_UserView.TaskCVP as [TaskCVP], MSP_EpmTask_UserView.TaskSVP as [TaskSVP], MSP_EpmTask_UserView.TaskCount
as [TaskCount], MSP_EpmTask_UserView.TaskBaseline0Cost as [TaskBaseline0Cost], MSP_EpmTask_UserView.TaskBaseline0FixedCost as [TaskBaseline0FixedCost],
MSP_EpmTask_UserView.TaskBaseline0Work as [TaskBaseline0Work], MSP_EpmTask_UserView.TaskBaseline0BudgetCost as [TaskBaseline0BudgetCost],
MSP_EpmTask_UserView.TaskBaseline0BudgetWork as [TaskBaseline0BudgetWork], MSP_EpmTask_UserView.TaskBaseline0StartDate as [TaskBaseline0StartDate],
MSP_EpmTask_UserView.TaskBaseline0StartDateString as [TaskBaseline0StartDateString], MSP_EpmTask_UserView.TaskBaseline0FinishDate as [TaskBaseline0FinishDate],
MSP_EpmTask_UserView.TaskBaseline0FinishDateString as [TaskBaseline0FinishDateString], MSP_EpmTask_UserView.TaskBaseline0DeliverableStartDate as [TaskBaseline0DeliverableStartDate],
MSP_EpmTask_UserView.TaskBaseline0DeliverableFinishDate as [TaskBaseline0DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline0Duration as [TaskBaseline0Duration],
MSP_EpmTask_UserView.TaskBaseline0DurationString as [TaskBaseline0DurationString], MSP_EpmTask_UserView.TaskBaseline1Cost as [TaskBaseline1Cost],
MSP_EpmTask_UserView.TaskBaseline1FixedCost as [TaskBaseline1FixedCost], MSP_EpmTask_UserView.TaskBaseline1Work as [TaskBaseline1Work],
MSP_EpmTask_UserView.TaskBaseline1BudgetCost as [TaskBaseline1BudgetCost], MSP_EpmTask_UserView.TaskBaseline1BudgetWork as [TaskBaseline1BudgetWork],
MSP_EpmTask_UserView.TaskBaseline1StartDate as [TaskBaseline1StartDate], MSP_EpmTask_UserView.TaskBaseline1StartDateString as [TaskBaseline1StartDateString],
MSP_EpmTask_UserView.TaskBaseline1FinishDate as [TaskBaseline1FinishDate], MSP_EpmTask_UserView.TaskBaseline1FinishDateString as [TaskBaseline1FinishDateString],
MSP_EpmTask_UserView.TaskBaseline1DeliverableStartDate as [TaskBaseline1DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline1DeliverableFinishDate
as [TaskBaseline1DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline1Duration as [TaskBaseline1Duration], MSP_EpmTask_UserView.TaskBaseline1DurationString
as [TaskBaseline1DurationString], MSP_EpmTask_UserView.TaskBaseline2Cost as [TaskBaseline2Cost], MSP_EpmTask_UserView.TaskBaseline2FixedCost as [TaskBaseline2FixedCost],
MSP_EpmTask_UserView.TaskBaseline2Work as [TaskBaseline2Work], MSP_EpmTask_UserView.TaskBaseline2BudgetCost as [TaskBaseline2BudgetCost],
MSP_EpmTask_UserView.TaskBaseline2BudgetWork as [TaskBaseline2BudgetWork], MSP_EpmTask_UserView.TaskBaseline2StartDate as [TaskBaseline2StartDate],
MSP_EpmTask_UserView.TaskBaseline2StartDateString as [TaskBaseline2StartDateString], MSP_EpmTask_UserView.TaskBaseline2FinishDate as [TaskBaseline2FinishDate],
MSP_EpmTask_UserView.TaskBaseline2FinishDateString as [TaskBaseline2FinishDateString], MSP_EpmTask_UserView.TaskBaseline2DeliverableStartDate as [TaskBaseline2DeliverableStartDate],
MSP_EpmTask_UserView.TaskBaseline2DeliverableFinishDate as [TaskBaseline2DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline2Duration as [TaskBaseline2Duration],
MSP_EpmTask_UserView.TaskBaseline2DurationString as [TaskBaseline2DurationString], MSP_EpmTask_UserView.TaskBaseline3Cost as [TaskBaseline3Cost],
MSP_EpmTask_UserView.TaskBaseline3FixedCost as [TaskBaseline3FixedCost], MSP_EpmTask_UserView.TaskBaseline3Work as [TaskBaseline3Work],
MSP_EpmTask_UserView.TaskBaseline3BudgetCost as [TaskBaseline3BudgetCost], MSP_EpmTask_UserView.TaskBaseline3BudgetWork as [TaskBaseline3BudgetWork],
MSP_EpmTask_UserView.TaskBaseline3StartDate as [TaskBaseline3StartDate], MSP_EpmTask_UserView.TaskBaseline3StartDateString as [TaskBaseline3StartDateString],
MSP_EpmTask_UserView.TaskBaseline3FinishDate as [TaskBaseline3FinishDate], MSP_EpmTask_UserView.TaskBaseline3FinishDateString as [TaskBaseline3FinishDateString],
MSP_EpmTask_UserView.TaskBaseline3DeliverableStartDate as [TaskBaseline3DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline3DeliverableFinishDate
as [TaskBaseline3DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline3Duration as [TaskBaseline3Duration], MSP_EpmTask_UserView.TaskBaseline3DurationString
as [TaskBaseline3DurationString], MSP_EpmTask_UserView.TaskBaseline4Cost as [TaskBaseline4Cost], MSP_EpmTask_UserView.TaskBaseline4FixedCost as [TaskBaseline4FixedCost],
MSP_EpmTask_UserView.TaskBaseline4Work as [TaskBaseline4Work], MSP_EpmTask_UserView.TaskBaseline4BudgetCost as [TaskBaseline4BudgetCost],
MSP_EpmTask_UserView.TaskBaseline4BudgetWork as [TaskBaseline4BudgetWork], MSP_EpmTask_UserView.TaskBaseline4StartDate as [TaskBaseline4StartDate],
MSP_EpmTask_UserView.TaskBaseline4StartDateString as [TaskBaseline4StartDateString], MSP_EpmTask_UserView.TaskBaseline4FinishDate as [TaskBaseline4FinishDate],
MSP_EpmTask_UserView.TaskBaseline4FinishDateString as [TaskBaseline4FinishDateString], MSP_EpmTask_UserView.TaskBaseline4DeliverableStartDate as [TaskBaseline4DeliverableStartDate],
MSP_EpmTask_UserView.TaskBaseline4DeliverableFinishDate as [TaskBaseline4DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline4Duration as [TaskBaseline4Duration],
MSP_EpmTask_UserView.TaskBaseline4DurationString as [TaskBaseline4DurationString], MSP_EpmTask_UserView.TaskBaseline5Cost as [TaskBaseline5Cost],
MSP_EpmTask_UserView.TaskBaseline5FixedCost as [TaskBaseline5FixedCost], MSP_EpmTask_UserView.TaskBaseline5Work as [TaskBaseline5Work],
MSP_EpmTask_UserView.TaskBaseline5BudgetCost as [TaskBaseline5BudgetCost], MSP_EpmTask_UserView.TaskBaseline5BudgetWork as [TaskBaseline5BudgetWork],
MSP_EpmTask_UserView.TaskBaseline5StartDate as [TaskBaseline5StartDate], MSP_EpmTask_UserView.TaskBaseline5StartDateString as [TaskBaseline5StartDateString],
MSP_EpmTask_UserView.TaskBaseline5FinishDate as [TaskBaseline5FinishDate], MSP_EpmTask_UserView.TaskBaseline5FinishDateString as [TaskBaseline5FinishDateString],
MSP_EpmTask_UserView.TaskBaseline5DeliverableStartDate as [TaskBaseline5DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline5DeliverableFinishDate
as [TaskBaseline5DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline5Duration as [TaskBaseline5Duration], MSP_EpmTask_UserView.TaskBaseline5DurationString
as [TaskBaseline5DurationString], MSP_EpmTask_UserView.TaskBaseline6Cost as [TaskBaseline6Cost], MSP_EpmTask_UserView.TaskBaseline6FixedCost as [TaskBaseline6FixedCost],
MSP_EpmTask_UserView.TaskBaseline6Work as [TaskBaseline6Work], MSP_EpmTask_UserView.TaskBaseline6BudgetCost as [TaskBaseline6BudgetCost],
MSP_EpmTask_UserView.TaskBaseline6BudgetWork as [TaskBaseline6BudgetWork], MSP_EpmTask_UserView.TaskBaseline6StartDate as [TaskBaseline6StartDate],
MSP_EpmTask_UserView.TaskBaseline6StartDateString as [TaskBaseline6StartDateString], MSP_EpmTask_UserView.TaskBaseline6FinishDate as [TaskBaseline6FinishDate],
MSP_EpmTask_UserView.TaskBaseline6FinishDateString as [TaskBaseline6FinishDateString], MSP_EpmTask_UserView.TaskBaseline6DeliverableStartDate as [TaskBaseline6DeliverableStartDate],
MSP_EpmTask_UserView.TaskBaseline6DeliverableFinishDate as [TaskBaseline6DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline6Duration as [TaskBaseline6Duration],
MSP_EpmTask_UserView.TaskBaseline6DurationString as [TaskBaseline6DurationString], MSP_EpmTask_UserView.TaskBaseline7Cost as [TaskBaseline7Cost],
MSP_EpmTask_UserView.TaskBaseline7FixedCost as [TaskBaseline7FixedCost], MSP_EpmTask_UserView.TaskBaseline7Work as [TaskBaseline7Work],
MSP_EpmTask_UserView.TaskBaseline7BudgetCost as [TaskBaseline7BudgetCost], MSP_EpmTask_UserView.TaskBaseline7BudgetWork as [TaskBaseline7BudgetWork],
MSP_EpmTask_UserView.TaskBaseline7StartDate as [TaskBaseline7StartDate], MSP_EpmTask_UserView.TaskBaseline7StartDateString as [TaskBaseline7StartDateString],
MSP_EpmTask_UserView.TaskBaseline7FinishDate as [TaskBaseline7FinishDate], MSP_EpmTask_UserView.TaskBaseline7FinishDateString as [TaskBaseline7FinishDateString],
MSP_EpmTask_UserView.TaskBaseline7DeliverableStartDate as [TaskBaseline7DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline7DeliverableFinishDate
as [TaskBaseline7DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline7Duration as [TaskBaseline7Duration], MSP_EpmTask_UserView.TaskBaseline7DurationString
as [TaskBaseline7DurationString], MSP_EpmTask_UserView.TaskBaseline8Cost as [TaskBaseline8Cost], MSP_EpmTask_UserView.TaskBaseline8FixedCost as [TaskBaseline8FixedCost],
MSP_EpmTask_UserView.TaskBaseline8Work as [TaskBaseline8Work], MSP_EpmTask_UserView.TaskBaseline8BudgetCost as [TaskBaseline8BudgetCost],
MSP_EpmTask_UserView.TaskBaseline8BudgetWork as [TaskBaseline8BudgetWork], MSP_EpmTask_UserView.TaskBaseline8StartDate as [TaskBaseline8StartDate],
MSP_EpmTask_UserView.TaskBaseline8StartDateString as [TaskBaseline8StartDateString], MSP_EpmTask_UserView.TaskBaseline8FinishDate as [TaskBaseline8FinishDate],
MSP_EpmTask_UserView.TaskBaseline8FinishDateString as [TaskBaseline8FinishDateString], MSP_EpmTask_UserView.TaskBaseline8DeliverableStartDate as [TaskBaseline8DeliverableStartDate],
MSP_EpmTask_UserView.TaskBaseline8DeliverableFinishDate as [TaskBaseline8DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline8Duration as [TaskBaseline8Duration],
MSP_EpmTask_UserView.TaskBaseline8DurationString as [TaskBaseline8DurationString], MSP_EpmTask_UserView.TaskBaseline9Cost as [TaskBaseline9Cost],
MSP_EpmTask_UserView.TaskBaseline9FixedCost as [TaskBaseline9FixedCost], MSP_EpmTask_UserView.TaskBaseline9Work as [TaskBaseline9Work],
MSP_EpmTask_UserView.TaskBaseline9BudgetCost as [TaskBaseline9BudgetCost], MSP_EpmTask_UserView.TaskBaseline9BudgetWork as [TaskBaseline9BudgetWork],
MSP_EpmTask_UserView.TaskBaseline9StartDate as [TaskBaseline9StartDate], MSP_EpmTask_UserView.TaskBaseline9StartDateString as [TaskBaseline9StartDateString],
MSP_EpmTask_UserView.TaskBaseline9FinishDate as [TaskBaseline9FinishDate], MSP_EpmTask_UserView.TaskBaseline9FinishDateString as [TaskBaseline9FinishDateString],
MSP_EpmTask_UserView.TaskBaseline9DeliverableStartDate as [TaskBaseline9DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline9DeliverableFinishDate
as [TaskBaseline9DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline9Duration as [TaskBaseline9Duration], MSP_EpmTask_UserView.TaskBaseline9DurationString
as [TaskBaseline9DurationString], MSP_EpmTask_UserView.TaskBaseline10Cost as [TaskBaseline10Cost], MSP_EpmTask_UserView.TaskBaseline10FixedCost as
[TaskBaseline10FixedCost], MSP_EpmTask_UserView.TaskBaseline10Work as [TaskBaseline10Work], MSP_EpmTask_UserView.TaskBaseline10BudgetCost as [TaskBaseline10BudgetCost],
MSP_EpmTask_UserView.TaskBaseline10BudgetWork as [TaskBaseline10BudgetWork], MSP_EpmTask_UserView.TaskBaseline10StartDate as [TaskBaseline10StartDate],
MSP_EpmTask_UserView.TaskBaseline10StartDateString as [TaskBaseline10StartDateString], MSP_EpmTask_UserView.TaskBaseline10FinishDate as [TaskBaseline10FinishDate],
MSP_EpmTask_UserView.TaskBaseline10FinishDateString as [TaskBaseline10FinishDateString], MSP_EpmTask_UserView.TaskBaseline10DeliverableStartDate as
[TaskBaseline10DeliverableStartDate], MSP_EpmTask_UserView.TaskBaseline10DeliverableFinishDate as [TaskBaseline10DeliverableFinishDate], MSP_EpmTask_UserView.TaskBaseline10Duration
as [TaskBaseline10Duration], MSP_EpmTask_UserView.TaskBaseline10DurationString as [TaskBaseline10DurationString], MSP_EpmTask_UserView.[Health] as
[Health], MSP_EpmResource_UserView.ResourceName as [ResourceName], MSP_EpmResource_UserView.ResourceType as [ResourceType],
MSP_EpmResource_UserView.ResourceIsTeam as [ResourceIsTeam], MSP_EpmResource_UserView.[Resource Departments] as [Resource Departments],
MSP_EpmResource_UserView.[RBS] as [RBS], MSP_EpmResource_UserView.ResourceCostCenter as [ResourceCostCenter], MSP_EpmAssignment_UserView.AssignmentCost
as [AssignmentCost], MSP_EpmAssignment_UserView.AssignmentWork as [AssignmentWork], MSP_EpmAssignment_UserView.AssignmentActualWork as [AssignmentActualWork],
MSP_EpmAssignment_UserView.AssignmentPercentWorkCompleted as [AssignmentPercentWorkCompleted], MSP_EpmAssignment_UserView.AssignmentStartDate as [AssignmentStartDate],
MSP_EpmAssignment_UserView.AssignmentFinishDate as [AssignmentFinishDate], MSP_EpmAssignment_UserView.AssignmentActualStartDate as [AssignmentActualStartDate],
MSP_EpmAssignment_UserView.AssignmentActualFinishDate as [AssignmentActualFinishDate], MSP_EpmAssignment_UserView.AssignmentType as [AssignmentType],
MSP_EpmAssignment_UserView.AssignmentResourceType as [AssignmentResourceType], MSP_EpmAssignment_UserView.AssignmentIsOverallocated as [AssignmentIsOverallocated],
MSP_EpmAssignment_UserView.AssignmentModifiedDate as [AssignmentModifiedDate], MSP_EpmAssignment_UserView.AssignmentResourcePlanWork as [AssignmentResourcePlanWork],
MSP_EpmAssignment_UserView.AssignmentRemainingCost as [AssignmentRemainingCost], MSP_EpmAssignment_UserView.AssignmentRemainingWork as [AssignmentRemainingWork]
FROM dbo.MSP_EpmProject_UserView INNER JOIN dbo.MSP_EpmTask_UserView ON
MSP_EpmProject_UserView.ProjectUID = MSP_EpmTask_UserView.ProjectUID LEFT OUTER JOIN dbo.MSP_EpmAssignment_UserView ON
MSP_EpmTask_UserView.TaskUID = MSP_EpmAssignment_UserView.TaskUID AND MSP_EpmTask_UserView.ProjectUID = MSP_EpmAssignment_UserView.ProjectUID
LEFT OUTER JOIN dbo.MSP_EpmResource_UserView ON MSP_EpmAssignment_UserView.ResourceUID = MSP_EpmResource_UserView.ResourceUID
ORDER BY MSP_EpmProject_UserView.ProjectName, MSP_EpmTask_UserView.TaskIndex,
MSP_EpmTask_UserView.TaskName

Change Documents in HU status management

I've been trying to activate change documents on HU status management (object type HUM). The user status profile that I set up works fine (except of course for the logging of the user status changes). Now, I suppose there must be a pretty standard (and maybe even straight-forward) way to activate the change documents for this object, but I simply don't see it. For this object, I get no entries in the JSTO/JEST tables, but in the HUSTOBJ/HUSSTAT. I however can not get to the point that the flag in field HUSTOBJ-CHGKZ is activated via standard customizing.
On the pop-up screen when selecting the HU status info, there's a check-box foreseen (however greyed-out) for the change documents, so, I guess the functionality is fully supported.
Can anyone guide me in the right direction?

Dear Patrick,
in the SAP-standard it is only possible to check the change documents
for the HU (in transaction HUMO, in the menu: Goto -> Chnge docs), but
there are no change documents for the status changes.
The reason the field is greyed out is that this functionality has not
been developed. It is a missing functionality. It would be only possible
via a modification to activate change documents for status changes of
the HU.
Regards,
Ely

Trigerring workflow through status management

Hi Abappers,
        I am new to workflow, can any body tell me how to trigger a workflow using.
      1. Change Management Document
      2. Status Management.
Regards,
Narendiran Rathinavelu.

Dear Narendiran
Got it..No need to create your own Object.There is a object called "ZBUS2012" for purchase order (Go to SWO1 you will find it in Object reposatory browser)Take its "Realeased" Event as your triggering event and u r done.
And if you still wanna use your own object then use method "create_event*" to fire your own event and take that event as your triggering event in workflow
Hope this will help
Also sent one good ppt for basic workflow design..refer it..
Reward points please
Regards
Message was edited by: Tushar Mundlik

Status Management Issue.

Similar Messages

Maybe you are looking for