Status Sniffer for Skype

Hello.
I'm looking for something that will obtain/generate/interpret a log of Skype statuses.
In an old post (from 4 years ago) I found reference to something that is close to what I want:
http://community.skype.com/t5/The-Skype-Lounge/Tra​ck-History-of-Skype-Status-Changes-Changelog/m-p/7​...
There was no reply to this post, and it refers to a Russian site bigbrotherlog.com, but that site seems to have disappeared. The name of the software translates to "Status Sniffer for Skype".
Can anybody point me in the direction of something like this? Or in the direction of where/how this information is stored on a user's PC? Please note that it's a record of status information I'm after, NOT conversation histories.
In addition to normal" Skype, a solution for "Skype for Business" would be of interest, too.
Cheers.

Don't know what to tell you, it's working great for us on both 2k and xp. You might want to get in touch with wildpackets support. We had no trouble with either of the above at anytime. We've had it about 6 months. We've been successful on a Dell Latitude, and 600e, T23 and T30 IBM's. Normal LEAP and wireless connectivity work after the wildpackets drivers are installed too so we're way happy replacing the way overpriced NA sniffer and support.

Similar Messages

  • How to disable the status icon in Skype 4 for Andr...

    Dear Skypers,
    How to disable the status icon in Skype 4 for Android phones?
    The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
    Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
    Device: Google Nexus 4
    Android: 4.3 JWR66Y
    Skype: 4.4.0.31835
    Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
    Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
    Kind regards,
    /chrone
    everytime i get ahead, i feel more dead.
    Solved!
    Go to Solution.
    Attachments:
    how to get rid of skype icon on android status bar.png ‏46 KB

    Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also. 
    Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed. 
    Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
    Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

  • Vote For Skype Changes You Want

    Want to Vote For Skype Changes? Make Suggestions?
    I know many of us Skype users see things that are needed. Things that were taken away we want back. Plus I have heard some very good new ideas.
    Hopeful Skype Is Listenting...
    I am hopeful. Why? Because we are starting to see a few small GOOD changes on Skype, after breaking a few important things. (did you know we can now remove messages f users in our group Skype rooms with Skype version 7.0?. HOW ABOUT EDIT? and how about Cloud Rooms?) 
    Vote Here 
    I made a Survey here where you can vote.
    and suggest new ideas for things you want Skype to change. 
    Here is the purpose of this Topic. Please contribute in these ways:
     Make Suggestions both here and in the Survey
    Vote for all the ideas in the survey
    Lets talk here about changes and their benefits and your reasons.
    Be hopeful, positive and polite please or we will ask admin to remove your comments here.
    Get my Skype Tips or Find New Skype Friends and Skype Chat Rooms at my Skype Directory or join my membership site all about Skype http://SeeYouOnSkype.com

    Excellent reply SeanEllis Thank you.
    Yes after I had the ideas, wrote a survey and created the Skype Room group, I discovered the Forum thread about Skype Ideas and had the same thought. they are already doing this. So, I guess the benefit of mine is to raise awareness of this Skype Idea Community Board.
    In my Skype Room guidelines, there is a link to the Survey which has links to all the Skype Ideas Boards for all the Skype clients, (Win7,8 iOS, Mac)... well Mac didnt have one, but I linked to the Mac blog & community.
    I completely agree and love the explanation of the process to elevate the most Kudo'd  (voted for/ popular) idea requests for implimentation. Very Impressive. People don't relaize that Skype/MS is listening... as you said ... to the clear focused voice of the most voted for and commented on Ideas for Skype changes.  So Pleae dont dilute the votes for the same request! I will repeat the good info  I found and link to it again.... 
    You can submit your improvement ideas to Skype for Windows desktop quickly and easily here.  Learn how
    Idea submission tips:
    Only one idea per submission
    Pick a descriptive title
    Very encouraging, I say!  My Skype Groups are all invited to read this, search for your ideas first,  submit yours only if someone else has not yet. Than vote for the ones you want with the  Kudo button below.  Do leave comments on teh ideass you want Skype to make happen. 
    Thanks everyone!
    Julie
    PS Status of Your Idea
    This is what shows me that Skype/MS is listening (from the last link above, in case you want to read the whole thing):
    What do the votes/kudos mean?
    Just as you can give kudos in the community boards and blogs, you can vote for ideas you like on the Idea Board. Ideas with high vote totals are more likely to be recognized and accepted by the teams at Skype who develop our products and services. You can also leave comments on ideas, but remember to be kind! (my underline)
    What do the different idea statuses mean?
    We strive to review submitted ideas on a biweekly/monthly cycle. Each idea will go through a life cycle that will be assigned statuses at each milestone. The statuses are explained here:
    Status of Your Idea:
    New Idea - Sparkly new idea, submitted by you (my tweak - or someone else), and ready to be vetted by the community.
    Comments Requested - Items set as Comments Requested will be open to the community for feedback and votes.
    Under consideration- Idea has been forwarded to appropriate business team who is determining feasibility.
    More information needed- More information is needed before our Product Management team can take this forward, please review the comments left by the team.
    Duplicate - Ideas in this status have already been submitted in some form or another. We will link these items over to the other idea so you can review the status or track the progress there.
    Already exists - This is available in the product. 
    Future possibility - Idea is a good one but not something we can include in a near-term product or software release.
    Accepted - Idea has been accepted and has been taken forward for implementation, check back soon for updates.
    Not right now - We like the idea but just not for right now, we will revisit it in the future.
    Implemented - You asked for it, we did it!
    For the full article read this. 
    Get my Skype Tips or Find New Skype Friends and Skype Chat Rooms at my Skype Directory or join my membership site all about Skype http://SeeYouOnSkype.com

  • Status Change for Purchase order in Process Purchase order

    Hi All,
    We have implemented SRM 4.0 with Extended Classic scenario.
    SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
    To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
    I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
    Presently even though all line items marked delete still shows PO as "Ordered" status.
    Kindly let me know if i can acheive with anyway.
    Thank you
    Ritesh

    Hi Masa,
    Thank you for your response. I have few doubts about the configuration which you have suggested.
    - Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
    My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
    If so then do i have to create status profile to include all the Standard Status message in it as well?
    - Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on  ITS level. Is my understanding right?
    - I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
    Kindly let me know.
    Thank you once again.
    Regards
    Ritesh

  • How to block the status mail for an inbound Idoc to a specific user

    Hi,
    I have to stop sending the error status mail to a specific user depenidng on Partner Type. This will trigger when an inbound Idoc contains status error(message type INVOIC &ORDRSP).This user needs other mails which are getting triggered with the same Idoc for the same partner. Basically, the requirement is to block only the status mail for that user. The statndard task for this is TS70008125 and it uses the agent determination rule 30000001 (Idoc Administrator).in WE46, this task is assigned to process code EDIR. I have copied the task to a custom task and changed the agent determination rule. I would like to know how will I configure this task so that this custom task will trigger for the status error, without altering other workflows for the same message type & the partner type. Or is there any other way to block the mail?
    Thanks,
    Santosh

    Hi,
    I have done the required coding to exclude the specific agent from the rule,copied the task and its ready. My question is how do I map this custom task to a particular partner type, for the message type INVOIC in WE20? (The message type used for the inbound Idoc is INVOIC). I checked the Partner profile in WE20. Most of the process code is using function module as the processing type.
    Thanks,
    Santosh

  • Getting status row for item '' activity id '' does not exist

    Hi,
    Need your help.
    Create a custom workflow SAMPRREQ. Its having following processes.
    1. Start Process
    2. Respond Notification.
    3. Function to update Table with the responded value.
    4. End process.
    After lauching the workflow, Notification send to the performer. Open the notification. When approver click the any of the result value (approve, reject, onhold) system giving followign message.
    3101: Status row for item 'SAMPRREQ/20130206161924', activity ID '242956' does not exist.
    I have seen some threads in the forums and bounce the database , purge the item type completly. But, still getting the error.
    Regards/Prasanth

    Sosa,
    When i run the wfstat nothing wrong in the info. unable to find the issue.
    But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
    In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
    When i comment these two dml ( update to header status & insert into events ) there is no error.
    Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
    Regards/Prasanth

  • A Suggestion for Skype to consider regarding the T...

    Hello, I have a suggestion for Skype. When I look at my "Purchase History" in my Skype account it no longer shows the time my order was placed. Not having this information makes it difficult managing my subscription.
    I would like to see Skype include the time a transaction was made in the "Purchase History" . 
    Thanks.

    Elitist is not the right word... But your expected to do you part too.
    I honestly think the "The Arch Way" wiki lays it out pretty damn well.
    https://wiki.archlinux.org/index.php/The_Arch_Way
    Read that, if it sounds good you will likely enjoy arch. If it sounds bad, yeah arch may be bad for you.
    Truth is the wiki is fantastic, and dedicated people have spent an amazing amount of time putting it together... So for ALMOST EVERYTHING there is detailed step by step information that basically will fix your problem. You just need to read it, understand it and possibly even research on your own the parts you don't understand.
    When people just come to the forum and ask to be told directly instead, yeah we may seem elitist expecting they know enough to figure it out on their own... But that is only because the community already wrote out a really really detailed explanation for them, but they just wanted someone else to do the work/troubleshooting for them. Its a bit weird to ask stranger to care more about your problems then you do
    But, detailed and specific questions are met with wonderful and fantastic help. This is the most stable and functional distro/operating system I have ever run (in part because after "building" it its pretty easy to fix.)
    This ISN'T a newbie distro in that its not for people who just want a working computer for minimal effort... That doesn't mean its hard mean or bad, but it does mean its targeted towards serious users who want to be able to build and fix their own system. A certain standard is expected (and I really like that), its not hard to meet it.... But if you don't want anything expected of you you may not want arch. Reading a paying attention can make it more or less an easy and fruitful experience for even novice users however.

  • Network Connectivity Status Indicator for IPv6 works wrong in Windows 7 and Windows 8

    Hi Folks,
    I am working on testing Network Connectivity Status Indicator for IPv6 in Windows 7 and 8.
    Waht is "Network Connectivity Status Indicator(NCSI)" you can refer to https://technet.microsoft.com/en-us/library/ee126135%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    I found that even if Network Connectivity Status Indicator detect IPv6 connection to http://ipv6.msftncsi.com/ncsi.txt failed.
    Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4.
    It will cause IPv6 fallback to IPv4 problem, that's 21 secs and 7 secs delay for fallback in Windows 7 and 8.
    Does anyone suffer the same problem?
    Or someone know how this works?
    Thanks!

    Hi Roger_Wang0214,
    "Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4."
    By default Windows prefers IPv6 over IPv4,we can manually configure the IPv4 prefer over IPv6 if it has result in any troubles.
    Here is a link for reference :
    Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012)
    https://support.microsoft.com/en-us/kb/2533454
    "The "Prefer IPv4 over IPv6" Fix it solution will configure your computer to prefer IPv4, instead of IPv6. By default, Windows prefers IPv6 over IPv4. If you are having problems using IPv6 to connect to some websites, this may resolve the
    problem."
    For a Windows 7 machine ,we can try the following fixit tool to configure IPv4 prefer over IPv6 .For a Windows 8.1 machine ,we can configure it referring to the manual part .
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
    If the DisabledComponents entry is unavailable, we can create it (DWORD (32-bit) Value).Then set a value with "0x20"to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
    Here is a link for reference :
    How to disable IPv6 or its components in Windows
    https://support.microsoft.com/en-us/kb/929852
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Camera is not working for Skype in Mac OS Maverics

    Hi,
    I have MacBook Pro (Mid 2012).  I have updated it to MAC OS Maverics.
    Since then camera is not working for Skype (Version 6.8.0.351)- only at the start it works for few seconds and then it freezes.
    It was working fine with Mac OS Lion.
    Please suggest some wayout from this.

    Shirsendu wrote: ... not working for Skype (Version 6.8.0.351....
    Install Skype Update: Skype_6.9.0.517
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Logical drive 1 status = Ready for recovery ml350 g5

    Hi,
    I have a problem with a HP Proliant ML350 G5, 2 weeks ago the server did shutdown unexpectedly i looked in the ACU and saw that the controller had a battery problem. I replaced the battery but the server keeps once or twice a day shutting down. I made a report from the ACU but i don't know what this all means.
    Here is a part of the report, i hope someone can lead me to the right solution,
    Thanks in advance.
    Array Diagnostic Utility Version 7.85.16.0
    Array Diagnostic Utility Inspection Report Version 7.85.16.0
    Date/Time:          Friday, June 27, 2014 3:43:11PM
    Computer Model:     HP Server
    SLOT SUMMARY:
       Slot Num  Slot Type  Array Controllers and Host Adapters Detected
       SLOT 0    PCI        Smart Array E200i Controller
    SLOT 0 Smart Array E200i Controller ERROR REPORT:
       Logical drive 1 status = Ready for recovery
    SUBSYSTEM INFORMATION:
       Chassis Serial Num:              GB87494LT1
       This Controller
          Array Serial Number:          QT79MU6382    
          Cache Serial Number:          P9A3A0B9SV00ST
       Other Controller
          Array Serial Number:          Not Available
          Cache Serial Number:          Not Available
    CONTROLLER IDENTIFICATION:
       Configured Logical Drives: 1
       Configuration Signature:   0xa00004c9
       Controller Firmware Rev:   1.66
       Controller ROM Revision:   1.66
       Controller Hardware Rev:   0x00
       Boot Block Version:        1.66
       Board ID:                  0x3211103c
       Cable or Config Error:     0x00 (No)
       Invalid Host RAM Address:  No
       CPU Revision:              0x00
       CPU to PCI ASIC Rev:       0x00
       Cache Controller ASIC Rev: 0x00
       PCI to Host ASIC Rev:      0x00
       Marketing Revision:        0x41 (Rev A)
       Expand Disable Code:       0x01
       Protocol Chip Count:       1
       Enclosure Count:           3
       Max SCSI IDs per Bus:      0
       Big Drive Map:             0x000c 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
       Big Ext Drive Map:         0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
       Big Non-Disk Drive Map:    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
       Fibre Chip Count:          0
       Recovery ROM Inactive     
       Image Revision:               
       Recovery ROM Active Image 
       Flags Status:              0x10
       Battery PIC Rev:           0x20
       NCQ:                       Not Supported
    LOGICAL DRIVE IDENTIFICATION:
       Logical Drive 1:
          Sector Size:              512
          Sectors Available:        143305920
          Fault Tolerance Mode:     Mirroring
          Logical Param Table:      cyl=17562 heads=255 sec/track=32 xlate sig=0x0
          BIOS Disabled:            No
          Logical Drive Ident:      0x       0
          Logical Drive Label:      A00004C9QT79MU6382     678E
    LOGICAL DRIVE CONFIGURATION:
       Logical Drive 1:
          Configuration Signature:  0xa00004c9
          Mapping Scheme:           Multiple Block
          Physical Drives:          2 (number not valid after drive movement)
             This Logical Drive:    2 (excluding spare drives)
          Fault Tolerance Mode:     Mirroring
          Logical Param Table:      cyl=17562 heads=255 sec/track=32 xlate sig=0x0
          Distribution Factor:      256
          Operating System:         64768
          Controller Order:         0
          Additional Information:   0
          Offset to Data:           0
          Int 13h Support Enabled:  Yes
          Sectors on Volume:        143305920
          Sectors per Drive:        143305920
          Big Drive Assignment Map: 0x000c 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
          Big Spare Assignment Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
          Array Accelerator is enabled for this logical drive.
    LOGICAL DRIVE STATUS:
       Logical Drive 1:
          Drive Status:           Ready for recovery
          Blocks to Rebuild:      0
          Blocks Re-mapped:      
          Spare Status Flags:     0x00
          Spare to Replaced Map:  See Big Spare to Replace Map:
          Media Was Exchanged:    No
          Cache Failure:          No
          Expand Failure:         0x00
          Unit Flags:             0x00
          Big Remap Count:        All Counts Zero
          Big Drive Failure Map:     0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
          Big Replacement Drive Map: 0x0004 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
          Big Active Spare Map:      0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
          Big Spare to Replace Map:  No spares have replaced any drives
          Big Spare Marked OK Map:   0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    MONITOR AND PERFORMANCE DATA:
       Port 1I, Box 1, Bay 2
          Factory:     Serial #, Firmware Rev, and Mfg/Model #:
             33 4e 50 32 34 36 59 30 30 30 30 30 39 38 31 36      3NP246Y000009816
             51 35 58 4e 48 50 44 37 00 00 00 00 48 50 20 20      Q5XNHPD7....HP 
             20 20 20 20 44 47 30 37 32 41 42 41 42 33 20 20          DG072ABAB3 
             20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00          ............
             00 00 00 00                                          ....
          Since Power: Serial #, Firmware Rev, and Mfg/Model #:
             33 4e 50 32 34 36 59 30 30 30 30 30 39 38 31 36      3NP246Y000009816
             51 35 58 4e 48 50 44 37 00 00 00 00 48 50 20 20      Q5XNHPD7....HP 
             20 20 20 20 44 47 30 37 32 41 42 41 42 33 20 20          DG072ABAB3 
             20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00          ............
             00 00 00 00                                          ....
          Serial Number Control:     0x0054
          Firmware Revision Control: 0x0248
          Mfg/Model Number Control:  0x0268
                     Factory          Since Power      Threshold        Control
          Serv. Time 00341415         000001d4         00000000         2104
          Read Blks  0000001788c34d46 00000000000002b1                  0108
          Hrd Read   00000485         00000000         00000000         2104
          Rtry Read  00000000         00000000         00000000         2104
          ECC Read   000000000000000d 0000000000000000 0000000000000000 2108
          Write Blks 00000006c04e371c 0000000000ffcf08                  0108
          Hrd Write  00000000         00000000         00000000         2104
          Rtry Write 00000006         00000000         00000000         2104
          Seeks      0000000000000000 0000000000000000                  0808
          Seek Errs  0000000000000000 0000000000000000 0000000000000000 0808
          Spin Cyls  00000000         00000000         00000000         2104
          Spin Time  0000             0000             0000             2202
          Test 1     0000             0000             0000             0802
          Test 2     0000             0000             0000             0802
          Test 3     0000             0000             0000             0802
          Test 4     0000             0000             0000             0802
          Spare Blks ffffffff         ffffffff                          0a04
          Re-mapped  0000009b         00000000         00000000         2504
          DRQ Tmots  0000             0000             0000             0802
          Timeouts   0000             0000             0000             2102
          Rebuilds   0002             0000             0000             2102
          Spn Retrs  ffff             ffff             0000             2902
          Fl Rd Recv 0000             0000             0000             2102
          Fl Wt Recv 0000             0000             0000             2102
          Format Err 0000             0000             0000             2102
          POST Err   0000             0000             0000             0802
          Drv Nt Ry  00000000         00000000         00000000         2104
          Reallc Abt 00000000         00000000         00000000         0804
          IRQ Gltchs 00000000         00000000         00000000         0804
          Bus Flts   00000054         00000001         00000000         2104
          Hot Plgs   00000000         00000000         00000000         2104
          Tk Rwt Err ffff             ffff             0000             2902
          Rmp Wt Err 0000             0000             0000             2102
          Bg Fw Rev  0000000000000000 0000000000000000                  0848
          Med Flrs   0000             0000             0000             2102
          Hrdw Errs  0007             0000             0000             2102
          Abt Cmd Fl 0000             0000             0000             2102
          Spn Up Fl  0000             0000             0000             2102
          Bd Tgt Cnt 0000             0000             0000             2102
          Pred Fails 00000000         00000000         00000000         2104
          DRIVE ERROR LOG:
             Error Log Header:
                Parameter Length    = 0x14
                Entry Size          = 0x0040
                Current Entry       = 0x1c
                Total Errors Logged = 0x0000021c
             Error Log Data:
    SCSI  CAM   Sense  Sense
    Stat  Stat  Key    Code    Qual   Block(Vl)       Time       Op   Info
    02    04    06     29      02     00000000(0)     002f200b   00   0000
    02    04    06     29      02     00000000(0)     002f477e   00   0000
    02    04    06     29      02     00000000(0)     0030a78b   00   0000
    02    04    06     29      02     00000000(0)     00311fd3   00   0000
    02    04    06     29      02     00000000(0)     00316ebf   00   0000
    00    0a    00     00      00     00000000(0)     00317117   00   0000
    02    04    06     29      02     00000000(0)     0032043a   00   0000
    02    04    06     29      02     00000000(0)     00329e1f   00   0000
    02    04    06     29      02     00000000(0)     0032c9aa   00   0000
    02    04    06     29      02     00000000(0)     0033b5c4   00   0000
    00    0a    00     00      00     00000000(0)     0033e304   00   0000
    00    0a    00     00      00     00000000(0)     0033e430   00   0000
    00    22    00     00      00     3f000000(0)     0033e509   5a   0000
    00    0a    00     00      00     00000000(0)     0033eec2   00   0000
    00    0a    00     00      00     00000000(0)     0033f285   00   0000
    00    0a    00     00      00     00000000(0)     0033f4f2   00   0000
    00    0a    00     00      00     00000000(0)     0033f6d2   00   0000
    00    0a    00     00      00     00000000(0)     0033fe90   00   0000
    00    0a    00     00      00     00000000(0)     0034003c   00   0000
    00    0a    00     00      00     00000000(0)     003402d0   00   0000
       Port 1I, Box 1, Bay 1
          Factory:     Serial #, Firmware Rev, and Mfg/Model #:
             33 4e 50 32 46 41 57 38 30 30 30 30 39 38 33 30      3NP2FAW800009830
             32 39 41 52 00 00 00 00 00 00 00 00 48 50 20 20      29AR........HP 
             20 20 20 20 44 47 30 37 32 41 42 41 42 33 20 20          DG072ABAB3 
             20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00          ............
             00 00 00 00                                          ....
          Since Power: Serial #, Firmware Rev, and Mfg/Model #:
             33 4e 50 32 46 41 57 38 30 30 30 30 39 38 33 30      3NP2FAW800009830
             32 39 41 52 48 50 44 43 00 00 00 00 48 50 20 20      29ARHPDC....HP 
             20 20 20 20 44 47 30 37 32 41 42 41 42 33 20 20          DG072ABAB3 
             20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00          ............
             00 00 00 00                                          ....
          Serial Number Control:     0x0054
          Firmware Revision Control: 0x0248
          Mfg/Model Number Control:  0x0268
                     Factory          Since Power      Threshold        Control
          Serv. Time 00055b43         000001d4         00000000         2104
          Read Blks  000000029c28733f 0000000001e70b56                  0108
          Hrd Read   00000000         00000000         00000000         2104
          Rtry Read  00000000         00000000         00000000         2104
          ECC Read   0000000000000000 0000000000000000 0000000000000000 2108
          Write Blks 00000000c7b62ee8 0000000000ffcf36                  0108
          Hrd Write  00000000         00000000         00000000         2104
          Rtry Write 00000000         00000000         00000000         2104
          Seeks      0000000000000000 0000000000000000                  0808
          Seek Errs  0000000000000000 0000000000000000 0000000000000000 0808
          Spin Cyls  00000000         00000000         00000000         2104
          Spin Time  0000             0000             0000             2202
          Test 1     0000             0000             0000             0802
          Test 2     0000             0000             0000             0802
          Test 3     0000             0000             0000             0802
          Test 4     0000             0000             0000             0802
          Spare Blks ffffffff         ffffffff                          0a04
          Re-mapped  00000000         00000000         00000000         2504
          DRQ Tmots  0000             0000             0000             0802
          Timeouts   0000             0000             0000             2102
          Rebuilds   0001             0000             0000             2102
          Spn Retrs  ffff             ffff             0000             2902
          Fl Rd Recv 0000             0000             0000             2102
          Fl Wt Recv 0000             0000             0000             2102
          Format Err 0000             0000             0000             2102
          POST Err   0000             0000             0000             0802
          Drv Nt Ry  00000000         00000000         00000000         2104
          Reallc Abt 00000000         00000000         00000000         0804
          IRQ Gltchs 00000000         00000000         00000000         0804
          Bus Flts   00000004         00000001         00000000         2104
          Hot Plgs   00000000         00000000         00000000         2104
          Tk Rwt Err ffff             ffff             0000             2902
          Rmp Wt Err 0000             0000             0000             2102
          Bg Fw Rev  0000000000000000 0000000000000000                  0848
          Med Flrs   0000             0000             0000             2102
          Hrdw Errs  0000             0000             0000             2102
          Abt Cmd Fl 0000             0000             0000             2102
          Spn Up Fl  0000             0000             0000             2102
          Bd Tgt Cnt 0000             0000             0000             2102
          Pred Fails 00000000         00000000         00000000         2104
          DRIVE ERROR LOG:
             Error Log Header:
                Parameter Length    = 0x14
                Entry Size          = 0x0040
                Current Entry       = 0x1f
                Total Errors Logged = 0x0000001f
             Error Log Data:
    SCSI  CAM   Sense  Sense
    Stat  Stat  Key    Code    Qual   Block(Vl)       Time       Op   Info
    02    04    06     29      02     00000000(0)     00000000   00   0000
    02    04    06     29      02     00000000(0)     00000001   00   0000
    02    04    06     29      02     00000000(0)     00006731   00   0000
    02    04    06     29      02     00000000(0)     00008ea4   00   0000
    02    04    06     29      02     00000000(0)     0001eeb1   00   0000
    02    04    06     29      02     00000000(0)     000266f9   00   0000
    02    04    06     29      02     00000000(0)     0002b5e5   00   0000
    02    04    06     29      02     00000000(0)     0002b83d   00   0000
    02    04    06     29      02     00000000(0)     00034b60   00   0000
    02    04    06     29      02     00000000(0)     0003e545   00   0000
    02    04    06     29      02     00000000(0)     000410d0   00   0000
    02    04    06     29      02     00000000(0)     0004fcea   00   0000
    02    04    06     29      02     00000000(0)     00052a2a   00   0000
    02    04    06     29      02     00000000(0)     00052b56   00   0000
    00    22    00     00      00     3f000000(0)     00052c2f   5a   0000
    02    04    06     29      02     00000000(0)     000535e8   00   0000
    02    04    06     29      02     00000000(0)     000539ab   00   0000
    02    04    06     29      02     00000000(0)     00053c18   00   0000
    02    04    06     29      02     00000000(0)     00053df8   00   0000
    02    04    06     29      02     00000000(0)     000545b6   00   0000

    Hi QUANT,
    Your Proliant server is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • IDocs sent to XI, processed only some, others in status Scheduled for o/b..

    Hi guys!
    We have a scenario, where Idoc is sent from r/3 into XI, here enters integration process, where the idoc is mapped to soap req, sent sync to web service, ws response is mapped to other idoc type and integration process sends data to r/3.
    The problem is, when more idocs are sent into xi from r/3 in short time. Some idocs are processed correctly, but some remain in status - Scheduled for outbound processing. When the same idoc (same data etc) is sent later, separately, the data (process) is processed succesfully.
    Any ideas, what could be wrong?
    Thanx a lot! Olian

    Hi Olian,
    This problem occurs when XI has not received the response from the webservice and it gets timed out.  You can monitor this in RWB - Message Monitoring.
    Have a look at this weblog
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    Hope this will help you in resolving the issue.
    Regards
    Sreenivas

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Duplicate Payment for Skype Number?

    I subscribed for skype online number on 10/31/2014 . You charged my account on 11/03/2014 in the amount of $30.48. On the 12/31/2014 you charged my account again for $30.00 for the same number again. I called my bank that you are charging me twice for the same number. I disputed the second charged that was made in the amount of $30.00. Can you please explain why you charged me $30.48 0n 11/03/2014.
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    Hi, Colorboy, and welcome to the Community,
    To clarify: the $30.48 charge on October 31st 2014 was for renewal of your Unlimited US & Canada 12 months subscription.  The $30.00 charge on December 31st 2014 was for renewal of your Skype Number for a 12 month term.
    As you reported one of these charges as fraudulent,  you will need to contact Skype customer service to restore access to your account.  Any time a charge is reported as fraudulent and a credit card charge-back is processed, the Skype account will be suspended as an effort to eliminate future fraudulent charges.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Field Status Group for Special G/L Indicators

    Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well.  But when it comes to general posting, they have different screen numbers.  One SAPMF05A 303 and the other one is SAPMF05A 304.  How did this happen?

    Hi Noel,
    As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
    Regards
    andrew

Maybe you are looking for