Statuses of Production Order

Hi,
What is the meaning of different statuses of production order?
Regards,
Prashant

Hi,
Mr. S. Kumar, pl. be carefull before posting in this forum. If you are not knowing anyone / any thread, you don't have right to use such abusing words.
If you are not intrested in giving correct answers to other persons queries in this thread, atleaset do not post this type of answers to other person's threads.
Pl. mind your language next time.
Hope you will.
Regards,
Prashant

Similar Messages

  • Status of production order

    hi all
    i want to display the status of production order (latest) in my report for each production order...can somebody help me with the names of tables and fields
    help please.....points wil b rewarded.
    thanx.

    Hi!
    For checking the status changes, you can use the table: JCDS
    It is linked to the prod.order with its object number.
    The system statuses are in TJ02 and TJ02T tables. User statuse are in TJ30 and TJ30T tables.
    Regards
    Tamá

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • RESA status in production order

    Dear all
    I want RESA status in production order . wht prerequisities is required and how it wil come ?
    plz suggest me

    Hi Surendra,
    When WIP transaction KKAX is run. WIP is calulated on orders which are released and has cost incured. System creates WIP entry for the entire cost incurred when settlement is run. System sets status "RESA" when WIP is run.
    When the WIP is calculated, the system sets the status RESA (Results analysis carried out). The system uses this status to select the orders for which work in process has been calculated.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Production Order Statuses - Open production orders

    Hello Gurus,
    I need to extract all the open production orders whose statuses are not DLV. help me out how I can do this. I dont know from which table I can extract this data.
    I know the tables related are -
    AUFK prd ord master data
    AFKO prd ord header
    AFPO prd ord details
    But I dont see the status field in any of these tables.
    Regards,
    B

    Vijay,
    Can u check if my code is correct.
    TABLES : AUFK, JEST.
    DATA  : BEGIN OF IT OCCURS 0,
            AUFNR LIKE AUFK-AUFNR,
            AUART LIKE AUFK-AUART,
            OBJNR LIKE AUFK-OBJNR,
            STAT  LIKE JEST-STAT,
            LINE  TYPE BSVX-STTXT,
            END OF IT.
    LOOP AT IT.
    SELECT AUFNR OBJNR FROM AUFK INTO IT WHERE AUART = 'PP01'.
    CALL FUNCTION 'STATUS_TEXT_EDIT'
      EXPORTING
       CLIENT                  = SY-MANDT
      FLG_USER_STAT           = ' '
        OBJNR                   = IT-OBJNR
      ONLY_ACTIVE             = 'X'
        SPRAS                   = 'E'
      BYPASS_BUFFER           = ' '
    IMPORTING
      ANW_STAT_EXISTING       =
      E_STSMA                 =
        LINE                    = IT-LINE
      USER_LINE               =
      STONR                   =
    EXCEPTIONS
      OBJECT_NOT_FOUND        = 1
      OTHERS                  = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF IT-LINE = 'DLV'.
    APPEND IT.
    ENDIF.
    ENDSELECT.
    ENDLOOP.
    WRITE /: IT-AUFNR.
    Regards,
    B

  • Dates for setting DLV and TECO status in production orders

    Hi,
    I am trying to understand where SAP is holding information on the date of change of status of Proces (or Production) order to TECO or DLV. I think that this information must be held somewhere as based this date is being used to calculate variance for production orders in KKS2 or KKS1 transaction.
    Thank you,
    Karol

    Hi
    1. In your Production Order - there is a Line in the 1st screen where you would see a series of Status Like REL DLV TECO SETC, etc
    2. you would see a i against the Statuses.. Click it
    3. You would see a tab called STATUS, where in all the Statuses are listed
    4. Click any of the desired status and then choose MENU Extras > Change docs > For Status
    Br, Ajay M

  • User status for production order

    From which table i can get the USER STATUS for a  production order?

    Hi
    Use the TableS:
    JEST  - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
    or from
    TJ02
    TJ02T
    reard if useful
    regards,
    Anji

  • Status of Production Order step

    Hello Experts,
    I have 3 steps in production order and I do confirmation at each step.  Is there any report that shows what steps are completed in a list of production order?
    Thanks in advance.
    Tom

    Hi,
    You can this through T-code COOIS. There you need to select as "confirmation", then you will get the report based on the confirmed operations.
    Regards,
    V. Suresh

  • How to find the status of production order for fully delivered orders

    Hi,
    My question is :
    when an order is confirmed for the end of month(jan) and no Gr is generated in jan then the order will not be included in jan month.
    For this solution given by functional :
    Get fully delivered orders for that period.
    My query's are :
    how to find fully delivered orders, is there any status in Co02 tran?
    Any suggestions for the given query are welcome..with elobration..
    thanks in advance.

    hi,
       The table name for Order status is VBUP and the field name is GBSTA.
    regards,
    Meiy

  • Mark a user status in production order automatically through user exit.

    Hi all,
    I have a requirement....I have a user profile which has got 4 status one of them is MFAR.
    I need to check this status through an exit automatically so that it appears in the status line
    and does not allow for goods receipt at the time of order creation through CO01 .
    I have earlier tried with EXIT_SAPLBSVA_001 but this is only for formatting the text line whether I want to display that status.So it is not working for my case.
    I could not find any exit for checking the checkbox for user status MFAR.
    Thanks and Regards
    Sweta

    Hi Anup,
    Have you used this exit for the purpose I mentioned as this is not just a simple header field it is status.
    How do I mark any user status as active through this exit. Can you give any idea?
    Thanks and Regards
    Sweta

  • PRODUCTION ORDER STATUS AFTER CO11

    HELLO ALL,
    I WANT OT KNOW THE STATUS OF PRODUCTION ORDER AFTER CONFIRMATION.
    If X prodcution order has been confirm on shop floor.
    and submited to QC.
    Next step is quallty inspection,then it will go to  finished goods store, then despatch.
    How can i see that , wheather order is in quailty for inspection , or it has been gone to finished store or from finished store to despatch.
    what will be the system status for this three stages ????
    Regards
    DHIRAJ

    Hi,
    The status of the order after confirmation will be CNF if fully confirmed or PCNF if partially confirmed. Similarly DLV or PDLV also. Whether material goes into QC or not order status will be these mentioned above. That means as soon as order has delivered the goods to the stock then order status does gets affected by the material movement. Whether a stock is lying in the shopfloor inventory or dispatch stores it is not affecrted. Even in MTO after delvery order is not impacted by inventory movements
    Regards
    Vineet

  • Production order print out in CRTD status.

    Dear Expert,
    Please guide me for how to take print out in CRTD status for production order.Has a work around I try to create status profile but still not able to make it.
    I dont want to change the settings in BS22,since its effect globally.Please let me know how to create the status profile for the same to allow system to take print out in CRTD status,since I read the others thread mentioning that it is possible with status profile.
    Regards.
    Swapnil

    Swapnil,
    This is not possible without changing system status in BS22 for business transaction RMDR for status I0001.
    Check below SAP note 157422 - PM/SM: Printing orders in status Created for more details.
    And I do not think this can be done with Status Profile in oder.
    Br
    KK

  • Production order status for wm staging for production

    Hi Friends,
    What should be the status of production order for wm staging of raw for production.
    In production order status Confirmed & delivered will I be able to do staging for the production order.
    Thanks,
    Kiran

    Hi
    Material staging should be allowed following the Release of the Production Order.
    Then, as an example, you could have your first operation in the order (OP10) to Consume Materials. This will then backflush the materials in the PSA (Production Supply Area) that the staged materials were taken to. Ensure that the materials are set for Backflushing in the material master in MRP2.
    If the OP10 is confirmed before materials have been staged then they will not appear in the LP12 staging report.
    It's all about timing
    Regards
    Darren

  • Production order status check

    Hi all,
    In my user-exit i want to check system status of production order and if it is not confirmed (when GR (101) started) exit shall give me error. How could i solve this problem?
    Regards
    Edited by: Evgeny Liznev on Jul 29, 2011 12:51 PM

    Hi,
    One way is to create a user status in BS02 and forbid the Goods Movement to production order when the status in Not confirmed. Attach the status profile to the Order type.
    Once the order is released, the production user can select this status, after confirmed the production user can select another status.
    If the status is not confirmed, warehouse person cannot enter Goods receipt to the order.
    Optionally you can also look into the following User Exit or BADI
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Implement the BADI -BADI - WORKORDER_GOODSMVT
    in that MANUAL_GOODS_RECEIPT,
    Regards,
    Sankaran

  • Production order STATUS TABLE

    gurus,
    in which table we can find status of production order.

    Hi,
    First go to CAUFV table input the production order get the object number
    Input this object number in JEST table and get the system status
    Input the system status in TJ02T table ,u will get the production order status

Maybe you are looking for

  • Error : Output could not be issued

    Dear Expert, I am not able to take print out of one of my invoice. While looking for print preview i am getting error message as below : Output could not be issued Message no. VF 304 Diagnosis An error occurred while output was being issued. It is po

  • Iphoto '11 slideshow does not play music from iTunes

    I cannot get iPhoto Slideshow to play music from iTunes.  I read one suggestion to go to iTunes > File > Library > Organize Library > and select REORGANIZE library.  When I do this it does not allow me to REORGANIZE, I can only CONSOLIDATE.  Any sugg

  • How do I get my Business Listing approved by Apple Maps?

    I am the Online Marketing Manager for a company with 30 locations across Canada. I have been trying to add each of our Stores to Apple Maps, however, I have not been able to get those Business Listings approved because of the phone numbers. Each of o

  • Opening a file through submit button

    Hi All,   I created a adobe form. When click on this submit, material will be created in backend.(R/3). This functionality is working fine. I need to add one more submit button. when clicking this button one htm document should be opened. ( this htm

  • URGENCY!!CMDTUX_CAT:1459

    i have a question, when i tested ud_test , i saw below message and whenever testing not happen, first test successed! , second test fail!, third test fail, next test succed!!! CMDTUX_CAT:1459: ERROR: Can't commit transaction, tpcommit() failed - TPEH