Step down(to save record) using mouse not same as step down using keyboard?
Hey Guys,
I noticed something very funny in our Siebel application, I have written a script on the WriteRecord event of a BC. Apparently the record is written to the DB only when the 'Ctrl + S' or 'Ctrl + Up/Down Arrow key' is used for a step down. When I do a step down suing the mouse (by clicking on the next record) the record does not get saved.
We are using Siebel Sales 7.7. Has anyone else come accross this issue. What I am more interested to know is that if this is a product defect or a mistake in my script. And after using the WriteRecord() in the WriteRecord() event code the record gets correctly saved
Regards,
Ryan
Thanks for your replies guys, The applet is being used in Edit List mode, the script is written on the BC. App version 7.7.2.12 [18393] SIA
Here is the code -
function BusComp_WriteRecord ()
try
this.ActivateField("Verification Flag");
if(this.GetFieldValue("Verification Flag") == "Y" && TheApplication().GetProfileAttr("SET_DATE") == "Y")
var SysDate = Clib.time();
var ObjDate = Date.fromSystem(SysDate);
var Month = ToString(ObjDate.getMonth()+1);
var Day = ToString(ObjDate.getDate());
var Year = ToString(ObjDate.getFullYear());
var Hour = ToString(ObjDate.getHours());
var Minute = ToString(ObjDate.getMinutes());
var Second = ToString(ObjDate.getSeconds());
var now = Month+"/"+Day+"/"+Year+" "+Hour+":"+Minute+":"+Second;
this.ActivateField("Comment");
this.SetFieldValue("Comment", now);
TheApplication().SetProfileAttr("SET_DATE","N");
}//if
catch(e)
throw(e);
finally
//destroy objects
Any clue?
Similar Messages
-
It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme. My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater. Is this doable?
Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage.
Here are the downsides:
WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
Bottom line......Saving a few bucks will be very costly in terms of performance on your network. -
Namespace Problem? Namespace prefix used but not declared.
Hello Guru's,
I am new to XSL templates, while genrating XML publisher report with these template, I am getting below "namespace" error:
If I remove the "set:"/"str:" expressions from the template, it works fine. Is there anything syntactically wrong in the expression? but not getting the results
Getting "Caused by: oracle.xdo.parser.v2.XMLParseException: Namespace prefix 'str' used but not declared." error while using this code
<xsl:call-template name="str:generate-string">
<xsl:with-param name="text" select="'Â '"/>
<xsl:with-param name="count" select="30"/>
</xsl:call-template>
Getting "Caused by: oracle.xdo.parser.v2.XMLParseException: Namespace prefix 'set' used but not declared." error while using this code
<xsl:template name="distinct">
<xsl:param name="nodes" select="/.."/>
<xsl:param name="distinct" select="/.."/>
<xsl:choose>
<xsl:when test="$nodes">
<xsl:call-template name="distinct">
<xsl:with-param name="distinct" select="$distinct | $nodes[1][not(. = $distinct)]"/>
<xsl:with-param name="nodes" select="$nodes[position() > 1]"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="$distinct" mode="set:distinct"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
I would appreciate any help in this regard.
SADeclare them in the namespace :)
<?xml version='1.0' encoding='windows-1252'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template name="distinct">
<xsl:param name="nodes" select="/.."/>
, </xsl:stylesheet> -
on startup I get this on the screen "Mouse not Detected" and my touchpad and keyboard will not work. Any help with this would be grateful
Thanks
SteveHi,
Hope this helps:
http://answers.yahoo.com/question/index?qid=20071226003704AAtR5vL
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
Using iTunes why can you not backup and save your voicemail? Guide me through this step by step if possible. If alternate method MUST be used then provide same. Truly appreciate this.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support - link doesn't state that voicemail is part of the backup
iCloud: iCloud storage and backup overview states that VVM is part of the icloud backup.
You can also contact your cell phone provider - as voicemail is a carrier feature. -
In ver 3.6 there was a prompt at shut down to save tabs. It seems that option is gone in ver 4. How can I fix this?
One of the changes in Firefox 4: '''''by default''''' Firefox 4 does not display the warning message when closing multiple tabs, but it can be turned back on by changing some preferences. ''<u>Note: This was a decision by the developers. On this forum, we are all '''uncompensated volunteers''' here to help other users. The developes/employees of Mozilla/Firefox rarely, if ever visit here.</u>''
#Type '''''about:config''''' in the URL/Location/Address bar and press the Enter key
#Accept the warning message (promise to be careful)
#The preferences page/list will open
#Filter = '''''browser.tabs.warnOnClose'''''
#If its value is set to false, double-click on it (in the lower panel) to toggle its value to true
#Repeat steps 4 and 5 for these following 3 preferences also:
#*'''''browser.warnOnQuit'''''
#*'''''browser.warnOnRestart'''''
#*'''''browser.showQuitWarning'''''
#**Note: last pref is new in Firefox 4b12, may need to add (boolean)
#**Info/Instruction for using '''''about:config''''': http://kb.mozillazine.org/About:config
#See:
#*https://support.mozilla.com/en-US/questions/785169
#*http://forums.mozillazine.org/viewtopic.php?f=23&t=2105039&p=10434467&sid=fd2a35945bb2c633687f7b50d8c53989
#*http://blog.zpao.com/post/3174360617/about-that-quit-dialog -
In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.Nice try! Take a hike.
-
For example on Find-A-Grave when filling in the form to add a memorial there are several blocks that you fill in including location. For some blocks you type in the information and others are pick one of the preset selections. I generally hit the tab key on my keyboard and goes to the next block except when it comes to the preset selection blocks. If I use the tab key to go to the next selection it skips right past the next selection to the selection below that. For example, after I fill in the year I hit the tab key and type u for the United States under the country selection. But in order to get the next block to appear I have to hit tab again (but only when using your browser). Your browser then skips past the state selection to the county selection. Then when I pick the state using the cursor it does it again and drops down to the Bio past the county selection.
When I use Internet Explorer I don't have this problem. I merely hit the tab button on my keyboard and it goes to the next selection rather than as your browser does that is skips to the block below.
Is there some reason you have it set up this way because it is quite annoying to have to go back up each time using the mouse cursor rather than continuing to use the keyboard to fill in everything (typing, tab key or using the arrow keys). To say the least it slows the whole process down a lot. No, it is not my computer. I've had the exact same problem using another computer. No, it is not the find-a-grave website. I just used it as an example. Using your browser forces me to stop using the keyboard to fill in a form and use the mouse and then the keyboard and then the mouse and then the keyboard and then the mouse, etc when it shouldn't be necessary when filling out a form on a website.Are you having the problem with just the one site? Others?
Please post some public linkss.
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there? -
Scroll list down by page wise using mouse
hi experts,
how can we scroll a list page wise rather than line wise using scroll button of mouse .
my requirement is to generate a list consisting of 38 lines per page and each set of 38 lines
should come in a new page that i have done using new-page, but problem is when i scroll
down a list using mouse scroll button next page should be displayed rather than scrolling
line by line . just like using pagedown key of the keyboard,
thanks in advance.I think this is not possible, I don't think controlling the mouse operation is possible
a® -
I have a full Creative Cloud Subscription, but I only use Photoshop and Bridge. I want to change to a less expensive subscription but it is not clear what steps I need to do to make this happen. Do you have a simple step by step guide? Seems that there is lots of help to upgrade but not down grade.
FIRST check with Adobe to find out if you may cancel what you have without a fee
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Then cancel what you have
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
And finally buy a new subscription
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan) -
1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results. -
I have managed to download Firefox - the first two steps apparently successfully but I cannot seem to drag the icon down to the dock. I use a mac mini. Thank you
== This happened ==
Not sure how often
== not sure ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_7; en-us) AppleWebKit/531.9 (KHTML, like Gecko) Version/4.0.3 Safari/531.9Make sure that Firefox gets installed properly.
Open the DMG file and drag to Firefox program to the application folder on your hard drive.
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
See [[Installing Firefox on Mac]]
See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X -
I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.
Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above. -
In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?
Please don't post the same question multiple times!
Maybe you are looking for
-
USB 2.0 on my Emac (angry content)
I forked over $450 for a new Ipod 60Gig Video. $25 for a case..I just get it today..and I find out apple stopped having firewire with their ipods? ***! I talked to a technichian about this and he says quote on quote "Apple no longer offers firewire b
-
Winhelp support in a Java program
Hello, Of the several products we develop, one, a Java program, uses the Java Help help system (logically). The others use a standard Winhelp help system (developed in Robohelp). Our current workflow for developing a help system for the Java program
-
Install Solaris on External Firewire Disk
Hello All, I have a laptop running windows 2000 and I have a External Firewire Hard Disk of 60 GB. Now my question is, " Is it possible to install Solaris 8 on this external Firewire Hard Disk". When I tried installing, It did not find the external F
-
After Effects team call-in hour this afternoon
Michael Coleman, the After Effects product manager, has just invited people to call in and talk with the After Effects team this afternoon. Here's his post. We did this a couple of months ago, and it was quite interesting. So, check out Michael's pos
-
OT: Cron and database export
I am trying to backup via a full export through a cron job. I can run the job from the command line: sh /home/oracle/backup/back_cron. However when I schedule it through cron, it says it cannot find the file. /bin/sh: line 1: sh /home/oracle/backup/b