Where is "Immediately Goto Cleanup on Sequence Failure" stored?

1. When I set "Immediately Goto Cleanup on Sequence Failure" on the Station Options dialog, where is that property stored? I want to have the process model set it and not let operators set it.
2. If I am running the Batch model, and one socket fails, what is a good way to terminate the other socket(s), or make the other socket(s) jump to their own cleanups?
Thanks,
cc

Hello cc,
For your first question, you can use the TestStand API to set the Engine.StationOptions.AlwaysGotoCleanupOnFailure property to True. This has the same affect as setting the Station Options manually.
You second question is more tricky. One way that you can have the other TestSockets go to their clean up is by sharing a FileGlobal. If one TestSocket fails, then it would set this variable to true. Then all of the other TestSockets would check this variable before each step to see if there is an error; if so, then they would branch to clean-up of that sequence. You will most likely want to use the ProcessModelPreStep and ProcessModelPostStepFailure Engine callbacks in your process model. They will fire at the appropriate time in your client sequence file (not in the process model where you defined them). I hope this helps. Have a greay day!
Best Regards,
Software Engineer
Jett R

Similar Messages

Reading Configure- Station Options- Immediately Goto Cleanup on Sequence Failure Checkbox Setting

In TestStand 3.5, how do you programatically read the status of the Configure->Station Options->Immediately Goto Cleanup on Sequence Failure checkbox? How would you programatically set this value?
Solved!
Go to Solution.

Thanks for the reply, but I tried your suggestion and it cannot resolve the reference. When I typed in Engine. it was immediately replaced by RunState.Engine. so I used RunState.Engine.StationOptions.AlwaysGotoCleanupOn Failure. When the step was executed, there was an error stating "Unknown variable or property name RunState.Engine.StationOptions". When I go to the context tab, I see the Engine object, but I cannot expand to see what elements it contains. Any further suggestions? How does one find out what "Engine" contains anyway?

Several executions in parallel : goto cleanup of another sequence

Hi guys,
My test sequence has this architecture : it launches 2 executions in parallel and for them to finish. In these 2 executions are placed several subsequences and test to verify my UUT (see image attached).
My test sequence should follow this behavior : some of my subsequence are crucial to my test, so any step failing inside these sequences (and only these ones) should stop the UUT test. These sequences are set to 'go to cleanup on step failure'. Then my first idea was to add a post-expression to these sequences in order to terminate my 2 executions.
=> It works fine but I'm running into this issue : http://www.ni.com/white-paper/14067/en#224640_by_Category . I need to have the correct status of my test sequence, I can't accept that it returns 'Passed'. 'Terminated' or even better 'Failed' status in mandatory for me (reporting purpose).
So the second idea was to go to the cleanup of my two executions when one of this critical sequences have a fail status... But I can't find a way to set the PostAction to target a step (group) outside of the current step's sequence.
Any idea ?
Attachments:
Architecture.png ‏25 KB

There is a way to detect that the execution was terminated. You can do the following:
1) Specify an object reference variable to store a reference to the execution when creating the sequence call.
2) After the wait step for the execution (i.e. after the execution has stopped), do something like:
Locals.myExecution.AsExecution.GetStates(Locals.runState, Locals.termState)
If the execution was terminated then Locals.termState == 2.
Hope this helps,
-Doug

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

How to terminate on Sequence Failure?

HI,
I would like to terminate the test upon a sequence failure. However ONLY from sequences called by the MainSequence!!
I tried to set in the PostAction --> Terminate on Fail, but it didn't stop?!
Can you recommend a way to accomplish it?
Also, I would like to see a Failure mark (red FAIL) on the failed sequence (if possilbe)
Thanks
Rafi

Rafi,
i tested your request and most of the things are working just as you request them:
- A failing step configured as Post-Action Terminate at Fail will terminate the execution.
- A sequence terminating by this action will get the result "Terminated"
What does not work as you (seem to) desire:
- The execution will never instantly stop, not with termination nor with abort.
- The result "Terminated" is displayed in a dark blue box within the Sequence Editor. There will not be the result Failed for the subsequence.
The execution will never instantly stop because TestStand always waits until possible active modules have finished. If you use the default SequentialModel, this method of temination should instantly initiate the termination procedure. Within this procedure though, all steps in the "Cleanup"-stepgroups are called going up the callstack. This is an important feature which cannot be changed.
Regarding your failure mark: do you use an UI other than the Sequence Editor?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

0x800700002 Tast Sequence Failure

Hi guy's,
I'm having a bit of a problem in trying to image a Dell OptiPlex 7020 machine in SCCM. I have downloaded the SCCM CAB & WinPE drivers from the Dell website, split them off so I am only using 32bit drivers, and I have then imported them into SCCM, adding
the WinPE drivers to our WinPE image and updating the corresponding distribution points.
The image process appears to go fine, and when it gets to the very very end of the TS, it throws up a 0x800700002 Task Sequence Failure error message when trying to access one of the packages. I did an ipconfig at this stage and the machine didn't have
any IP address settings......I checked this again at the start of the image process, and the machine DOES have an IP address assigned at the beginning, and accesses this very same package perfectly fine at the beginning when it has an IP address.
I have re-imported the drivers a number of occasions, but this hasn't made a difference. All access rights appear to be in place, and older model machines we have image perfectly fine without any issues.
I tried posting up the log, but the forum here has complained about not allowing images/links until my account is verified.
Can anyone offer any assistance? I've been testing and trialling for nearly a week trying all sorts without success.
Thanks

Anyone? Any suggestions? :)

Tables where the survey questionnaire and response information gets stored

Dear experts,
Could you please help me with the information on the tables where the survey and survey responses will get stored in the system?
Thanks and regards,
Ranjan

Hi,
These are all talbes in SRM relates to Survey.
ROST_LANG_QSTN        Language Selection for Question
ROST_PCAT_QSTN        Assign Product Category and Questionnaire to Lan
ROST_SEL_PRODCAT    Product Categories for Regis
ROST_WS_QSTN            Web Survey Questionnaire
ROS_BP_PC_SURVEY    Assign Vendor, Product Category, Survey
CRMD_IC_SCRATTR        Script/Survey attributes (Interactive Script Editor)
ROST_WS_QSTN            Web Survey Questionnaire
ROS_BP_PC_SURVEY    Assign Vendor, Product Category, Survey
TUWS_SURVEY              Survey
TUWS_SURVEY_LOG     Survey Log
TUWS_SURVEY_PUB      Survey Publishing
TUWS_TAROBJ               Survey: Recipients
TUWS_TAROBJ_ATTR    Survey: Recipient Attributes
Regards,
yaniVy
reward if helps

Where are stats that are gathered using dbms_stats stored?

where are stats that are gathered using dbms_stats stored?

http://docs.oracle.com/cd/E11882_01/server.112/e16638/stats.htm#PFGRF94765

Where is the background picture for a window stored?

Greetings,
Where is the background picture for a window stored? What is the file called? I am trying to find the image used on a DVD.
Thanks

when you set a picture to be a background of some folder that picture is not moved from its original location. instead a record is made in the .DS_Store file of that folder indicating that this picture is the one to be used for the background. in case of the DVD it is likely sitting in some hidden folder right on the DVD.
run the following terminal command to enable showing hidden files in finder
defaults write com.apple.finder AppleShowAllFiles 1; killall Finder
then look on the dvd and the picture should be there somewhere. if you still can't find it open the .DS_store file of the folder in question using Text Editor. a lot of this file will be unreadable but the picture path will be present in plain text.
when done rerun the above command after changing 1 to 0.

Where can I find the WEP password/number stored on my mac

Where can I find the WEP password/number stored on my mac.?

Assuming you saved it it will be in your Keychain (Applications > Utilities > Keychain Access)
Regards,
Shawn

Where is play count and watched/unwatched data stored?

Where is play count and watched/unwatched data stored?
Is it on file or somewhere else?

I don't know where play count is stored, but, when using list view for songs
Go to menue toolbar item 'View' - on the drop down list that appears choose 'View Options...'
In the window that opens up check the box next to Play Count
now iTunes will keep track of how many times you play each song.
But, if you follow the same menue path while movies are in list view mode, the play count option does not appear to exist for movies, although date last played is an option.
If you don't check the box in view options, I don't think iTunes will keep track of song play count. The only data from past use of any individual item iTunes can show is probably limited to that items' metadata that you can see using the 'get info' option for any selected item.

Where is my signature from Mail/Preview Markup stored?

I just found out about adding my signature to documents in Mail and Preview (way cool!) and was wondering where the digital file of my signature is stored.
I was really impressed by the quality of the signature and now I'd like to use it in other places as well
I'm using a 2013 MB Air with 10.10.1 installed.
Anyone have any guidance?

The usual location for iTunes media is indeed <User's Music>\iTunes\iTunes Media however you can set up iTunes so that you can add in media stored in other locations such as an external drive. Check the setting under Edit > Preferenecs > Advanced for the location of the media folder in case you changed it at some point. You can see the location of any individual file by right clicking on it and clicking Show in Windows Explorer.
tt2

Option ReTest Sequence Failure

Hi All,
I'm quite new in test stand and I need some help on my test program.
I have a local sequence created on my main sequence. I shall call this sequence as "tuning".
This "tuning" sequence actualy tests if the unit is tuned properly.
In most cases the first tuning always fail. So I want to give them the option to retune it and redo the sequence again.
I can do a pass fail count on the looping properties for example "Stop after 1 pass or a maximum of 10 Iterations" in which to my understanding
is the operator can tune it upto 10 ten times before it could be considered a fail unit.
My problem is that sometimes after one tuning test the operator can tell right away that it is a helpless case and it can not be tuned. So i dont want them
to wait until ten times before failing a unit since the sequence cycle time is quite long.
I want to give them an option to fail the unit right away if they think its a failure maybe after trying 4-5 times.
This where my question goes::: how do i approach it?
Advise will be gladly appreciated.
Best Regards,Ray

This is what I have done.. I don't know where I'm getting wrong..
Attachments:
11.seq ‏9 KB

Comenting code - style - how to keep coments where you want them - without using sequences

Silly question maybe about style of commenting.
Basically i like to use sequence boxes to keep comments on my diagram beside the bits of code that they refere to - otherwise when you use diagram cleanup (which i'm afraid i use all the time) they go anywhere. This is good - except that i found especially when doing FPGA programming the sequence boxes reduce the amount of parralelism that can go on - since the 'box' needs to finish before any of the outputs can be used. Is there some other method i should be using instead of sequence boxes to keep text beside elements - without enforcing that a set of elements are fixed in one place?
Solved!
Go to Solution.

I usually use labels of structures (loops, cases, etc) and labels of diagram constants, etc. for comments. In newer versions, we also have wire labels.
(see also)
What is your LabVIEW version? Also the LabVIEW 2011 cleanup does a better job keeping diagram comments together with the related code compared to earlier version.
LabVIEW Champion . Do more with less code and in less time .

Where is "Immediately Goto Cleanup on Sequence Failure" stored?

Similar Messages

Maybe you are looking for