Steps for configuring LDAP in Portal

hi all,
i need step by step configuration for the LDAP Server in portal
so can u please help me in that.
thanks,
sriram.

Hi Sriram,
Following are few documents for configuring LDAP in portal. Have a look.
Check this to Configuring EP UME with LDAP Data Source, in the below link check the left navigation child nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d7b4f47ea91635e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source
Check these
http://wiki.sdn.sap.com/wiki/display/EP/Setting%2bUp%2ban%2bLDAP%2bfor%2bthe%2bPortal
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
I hope these links will help you.
Regards,
Gopal.

Similar Messages

Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

LDAP user groups not visible for configuring a Group Portal

Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2 in which
I've added the Novell LDAP Authentication provider as the authentication provider
and then set "myRealm" as the default realm for the domain. I am able to start
the WLS server instance and login to portalAppTools with the "administrator" account.
We would like to configure a Group Portal. In Portal Administration interfaces,
when I click on Group Administartion, I am unable to see any of my external LDAP
groups. I know that we cannot create/delete users or groups in the external LDAP
repository thru the Admin UI but the documentation says that I should be able
to view the users/groups in the Admin UI. Authentication against the external
LDAP repository works fine. Can anybody suggest the reason why we are unable to
view any of the Users or Groups in our external LDAP repository thru the User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram

Hi Jim,
I've configured a default LDAP V2 Compatibility Realm by modifying the Config.xml
file. I was able to restart Weblogic and see the LDAP Groups and Users thru the
WLS console. In our project we've a unique requirement wherein all Application
Groups and User Accounts would be stored in an LDAP repository and all BEA SERVICE
level accounts and groups are stored in a Database (groups like AdminEligible,
Administrators etc.). We need to be able to look at the groups in both the Database
and LDAP repositories in order to administer and configure a Group Portal. On
the outset it looks like we will not be able to do what we want to with the current
portal framework. Please suggest if there are any alternatives in order to implement
this solution. I am sure there are lot of other Clients who cannot create groups
like Administrators, AdminEligible etc in their LDAP repositories and will be
forced to think of alternatives.
I would appreciate if you can reply back at your earliest convenience.
Thanks
Vikram
Jim Litton <replyto@newsgroup> wrote:
The Weblogic 7.0 Authentication Providers (new JAAS Framework) is not
supported with Portal 7.0. You will need to configure the Compatibility
Security CustomRealm for Novell to try to get Portal working.
see defaultLDAPRealmForNovellDirectoryServices at
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1083149
In addition, remember to test functionality through the Weblogic
Console. If you can see groups and users there okay it is very likely
that Portal will operate.
-- Jim
Vikram wrote:
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2in which
I've added the Novell LDAP Authentication provider as the authenticationprovider
and then set "myRealm" as the default realm for the domain. I am ableto start
the WLS server instance and login to portalAppTools with the "administrator"account.
We would like to configure a Group Portal. In Portal Administrationinterfaces,
when I click on Group Administartion, I am unable to see any of myexternal LDAP
groups. I know that we cannot create/delete users or groups in theexternal LDAP
repository thru the Admin UI but the documentation says that I shouldbe able
to view the users/groups in the Admin UI. Authentication against theexternal
LDAP repository works fine. Can anybody suggest the reason why we areunable to
view any of the Users or Groups in our external LDAP repository thruthe User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram

Configure LDAP to portal

Hi all,
Please could some body give me the overview stpes how the configuration takes place LDAP to Portal?
Sai

Hi Sai,
Follwing is step by step solution to configure LDAP server for EP
1) Ensure that the UM Configuration is set to Database Only or that the current
    UM configuration creates new users in the database.
    a) Navigate the the UM Configuration UI (System Administration -> System
        Configuration -> UM Configuration) and select the Data Sources tab.
    b) Choose Database Only or any Read Only dataSource.
    c) Save.
    d) Restart J2EE Engine.
2) Create a new user ID in the portal and assign it to the Super Administration role. Log off and then log back on to the portal with this ID to ensure you can access the administrative function using the ID from the database. This ensures that you can logon and perform administration tasks even if the portal is unable to connect to an LDAP source.
3) Establish the initial UM configuration.
   a) Navigate the the UM Configuration UI (System Administration -> System
       Configuration -> UM Configuration) and select the Data Sources tab.
   b) Choose the most appropriate DataSource configuration from the delivered list
       (e.g. iPlanet, Novell, MS ADS, etc.)
   c) Complete UM configuration for the first LDAP data source using the User
       Management Configuration Tool.
   d) Restart the J2EE Engine.
   e) Logon to portal server with an LDAP user to test the connection. If there are
       problems, use the database user ID you created in step #2 to logon to the
       portal and resolve connectivity issues.
4) Capture information required for creating a new UM Configuration for Multiple
    LDAP sources.
    a) Log back on to the portal using an administrator ID.
    b) Navigate back to the UM Configuration Tool and select the Data Sources
        tab.
    c) Click Download to download a copy of the appropriate XML file. Save this
        file to your local filesystem for editing.
    d) Navigate to LDAP Server tab and verify connection information to the LDAP
        server. Click Test Connection to ensure credentials are correct. Save the
        configuration before continuing to the next step.
    e) Navigate to Direct Editing tab.
    f) Scroll down to the LDAP Settings section and copy the contents to MS
        WordPad or other text editor (configuration document).
5) Create a new UM configuration file for multiple LDAP data sources.
    a) Open the dataSourceConfiguration_multiLDAP_db.xml file (previously
        downloaded) using a text editor (other than Notepad) and locate the
        <dataSource.../> section for the CORP_LDAP. Copy the entire section
        from <dataSource> to </dataSource> to the clipboard.
    b) For each additional LDAP server, paste the copy into the document after the
        original </dataSource> ending tag for the CORP_LDAP source. Change
        the name of the data source for pasted copy to CORP_LDAP_X or some
        other value. This value becomes a data source identifier for UME and prefixes
        the principal Ids.
    c) For each LDAP data source, locate the <privateSection> within the
        <dataSource> tag and enter the following lines if they are not present:
<i>
<ume.ldap.access.server_name>SERVER_HOSTNAME</ume.ldap.access.server_name> <ume.ldap.access.server_port>SERVER_PORT</ume.ldap.access.server_port> <ume.ldap.access.user>DS_USER_NAME</ume.ldap.access.user> <ume.ldap.access.password>DS_PASSWORD</ume.ldap.access.password> <ume.ldap.access.base_path.user>USER_ROOT_IN_DS</ume.ldap.access.base_path.user> <ume.ldap.access.base_path.grup>GROUP_ROOT_IN_DS</ume.ldap.access.base_path.grup></i>
    d) Update the properties for each datasource with the correct values obtained
        from the Direct Editing tab (now stored in the configuration document). An
        example is shown below: <dataSource id="CORP_LDAP_2"
<i>
className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence" isReadonly="true" isPrimary="true"> ... <privateSection> <ume.ldap.access.server_name>i802895a.phl.sap.corp</ume.ldap.access.server_name> <ume.ldap.access.server_port>389</ume.ldap.access.server_port> <ume.ldap.access.user>cn=Directory Manager</ume.ldap.access.user> <ume.ldap.access.password>ksdf8SDF#%</ume.ldap.access.password> <ume.ldap.access.base_path.user>ou=people,dc=phl,dc=sap,dc=corp</ume.ldap.access.base_path.user> <ume.ldap.access.base_path.grup>ou=groups,dc=phl,dc=sap,dc=corp</ume.ldap.access.base_path.grup> <ume.ldap.access.server_type>SUN</ume.ldap.access.server_type> [more stuff] </privateSection></i>
6) Upload the new UM Configuration file.
    a) Navigate back to Data Source tab and choose Other for the data source.
    b) Click Upload and navigate to the new configuration file -
        dataSourceConfiguration_multiLDAP_db.xml. Upload this to the server.
    c) Click Save to save the new configuration.
    d) Navigate to the Direct Editing tab.
    e) Comment out all of the LDAP settings which begin with ume.ldap.access.*
        such as server name, passwords, etc. that are now manually configured in
        the XML file.
    f) Click Save to save the properties. (You may also wish to make a copy of the
       new settings and save them to a file for recovery purposes). g) Restart the
       J2EE engine.
7) Test the configuration.
PS: Pl award points if post found useful

MSS Customizing Steps for MSS within SAP Portal

Hi HCM-experts!
I would like to integrate MSS functions within SAP Portal.
Where can I find the suitable technical documentation describing the steps with tcode/reports, SPRO steps for:
- Team Calender
- Assigning the user to Organization and to Staff
- Budget
- Projects and Planning functions
Any technical information will be very appreciated!
Holger

Please go to help.sap.com
here is the link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm

Steps for configuration of version management

Dear Experts,
Kindly tell me what is meant by version management and under which situation this will be used and how its impact in MM after configuring this. Kindly let me know the configuration steps for version management.
Regards,
Prasath

You make the settings here for activating the version management:
SPRO --> MM --> Purchasing --> Version management --> Set up version management for PR -->here make the settings and tick on the activate indicator...
Now define the relevent fields which shd go under version change:
SPRO --> MM --> Purchasing --> Version management --> Version relevent fields of PR's
If you wanna set up change displays and its output, then make settings here:
SPRO --> MM --> Purchasing --> Version management --> Set up change displays...
NOTE: You can only release this PR fully if you tick the version completed indicator in the PR document...
Similrly you can activate for Purchase order
spro-mm-purchasing-version management-purchase order

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Steps for configuration of products

Hi ,
can anyone say me the procedure that should be followed for configuring the Products.
bye,
divya

Hi Divya,
What kind of procedure are you talking about?
Downloading the master data for configuration or configuring the product?
If its just configuring the product, when u add a configurable product in CRM order, a configuration tab appears. Go to this tab and choose the characteristic value corresponding to characteristics. Click on Check button to see if configuration is consistent and complete. If yes, save the order.
Regards,
Vivek Gupta

Steps for configuring Outbound Idoc OILSHI01

Hi experts,
    can anybody tell me the steps how to configure an Outbound IDOC.
    It is better if somebody can take Shipment IDOC of IS-Oil - OILSHI01.
    if not anything else will also do.
    Kindly give me steps in detailed. Since i have never done this. Including
    distribution modle (BD64). in which case it generates the Automatic Partner
    profiles.?
<REMOVED BY MODERATOR>
Regards,
Umesh
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:08 PM

Hi Umesh,
Sorry for the late reply. Let me clear your couple of misconceptions first.
Every idoc is an application idoc. That is, if an idoc is not attached to any application, then it doesnt make business sense to generate that idoc.
Secondly, an idoc is outbound or inbound depending upon its communication direction w.r.t. the sender system. If the idoc is going out from lets say R/3 system (where you are creating distribution model), then its an outbound idoc and if its coming inside, then its inbound idoc.
Now the further steps:
Since its a transactional data idoc, we dont generally go for change pointer activation. Kindly read the documentation to get more idea (if you dont have any then send me your mail id, i will send you a very good document). For transaction data, we use output type to trigger an idoc. Following are the steps to trigger an outbound idoc through output type.
However, remember that in this case, you need help of your functional consultant at every point so that you can clearly determine your application definations and configuration.
1. Go to transaction NACE. There you can see all the generic applications listed. Find out the one relavant to your idoc type from the functional person. If you select your relavant aplication, and click on the "Output types", you will see a list of all the output types for each business transaction defined for that application.
2. Again, ask your functional consultant, as to which output type is configured for your business transaction. Select that output type and go to "Processing routines".
3. There you will be able to see different ways in which the idoc can be triggered. Most of the time , we use processing routine "A (Distribution (ALE))". There you will also see the report which will trigger the idoc.
4. All the above mentioned customization is to be done by the functional consultant (or by technical after strictly seeking the permission). Once the output type is set, you go to the business application (IS-oil) which is triggering your idoc.
There, you will see the option of generating delivery (or something similar, again only the person who has worked on the application can tell that). there you can populate the idoc.
Once the idoc is populated by the application, there are couple of ways of triggering the idoc.
     a. trigger the idoc on saving the doucment. this triggers idoc as soon as you save the idoc.
     b. Collect for mass processing. For this you need to run the report RSNASTED after the idocs are populated to trigger them.
     c. Collect for application specific posting. For this , you need to know the transaction, specific to your business data to trigger the idoc and all you need to do is just run that transaction.
Hope you got the points mentioned above. Kindly go through them carefully and then give me your mail id. I will send you one good document which will clear your understanding.
Hope this was helpful.
<REMOVED BY MODERATOR>
Cheers,
Karan
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:09 PM

Steps for configuring shipping cost document

Hi experts
Can anybody Please explain me the steps. Say that shipping cost is based on Route, weight group and carrier. We will be having an condition record for it. So here how do we configure shipping cost document.
awaiting reply
Bhanu

hi,
you have to add a condition for freight in the calcualtion - sheet.
Bring i your condition - records.
While copying form delivery to invoice, you have to set the pricing - roule 'H' calulate new fright costs and in the invoice, there will be a new pricing for the fright-costs ( and the tax ). ( The Condition should have the type fright ).
Hans

Steps for configuring AXIS framework in SOAP adapter

hi,
can anybody tell me step by step procedure on how to configure the AXIS framework in SOAP adapter
Also can anybody suggest me an appropriate scenario where AXIS framework can be used
regards,
loveena

an appropriate scenario where AXIS framework can be used
There could be some cases where standard soap adapter does not support a functionality. Like storing cookies value in http header. At that time SOAP axis framework could be used. U may consider AXIS as a new way of impementation of the existing SOAP protocol.
Regards,
Prateek

Step by Step workflow configuration required for PM Notification

Hi All,
as per our requirement we need to trigger workflow when PM Notification Status will be change (Event will trigger for approval when sombody manually change the workflow status)
Kindly guide me step by step for configuration of that

not answered closing thread

Steps to configure Solution Monitoring for Satellite Syst.

Hi Experts,
I am using my friend's ID for posting my query.
I need to configure Solution monitoring of different Satellite Systems in our Solution Manager server.
Could you please give me the steps for configuring the same.
Please help.
Thanks in advance,
Sandeep.

Sandeep,
You will get good documentation & tutor files from https://websmp206.sap-ag.de/ -> Knowledge Exchange,Solution Manager -> Solution Manager 4.0.
Hope this will help.If not please let me know.
Regards,
Cherry

Steps for configuring LDAP in Portal

Similar Messages

Maybe you are looking for