Steps for configuring AXIS framework in SOAP adapter
hi,
can anybody tell me step by step procedure on how to configure the AXIS framework in SOAP adapter
Also can anybody suggest me an appropriate scenario where AXIS framework can be used
regards,
loveena
an appropriate scenario where AXIS framework can be used
There could be some cases where standard soap adapter does not support a functionality. Like storing cookies value in http header. At that time SOAP axis framework could be used. U may consider AXIS as a new way of impementation of the existing SOAP protocol.
Regards,
Prateek
Similar Messages
-
Axis Framework in SOAP Adapter in PI 7.1
Hi Experts,
I am working on PI 7.1 . I just need to know all that I can about Axis Framework in SOAP Adapter
All inputs are welcome.
Many thanks,
NehaHi !
have a look on these links
Using the Axis Framework in the SOAP Adapter
http://help.sap.com/saphelp_NW04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Have a look at this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f
Thanks !
Abhishek -
Real time scenario for AXIS framework in SOAP adapter
Hello,
Can anybody please suggest some real time scenario where AXIS framework can be used
and what are the advanteges and disadvantages of using AXIS framework
regards,
LoveenaHi !
have a look on these links
Using the Axis Framework in the SOAP Adapter
http://help.sap.com/saphelp_NW04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Have a look at this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f
Thanks !
Abhishek -
AXIS framework in SOAP adapter
Hi,
I am working on PI 7.1. I need to understand about the use of AXIS framework in the SOAP adapter.
Please throw some light on the what exactly is AXIS framework and why is it used while configuring the SOAP adapter.
Also suggest scenarios where AXIS framework is used.
Ihave gone through the SAP help documents and the following link already, but am unable to get the hang of it:
[http://help.sap.com/saphelp_NW04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm]
How Tou2026 Set http-Header Parameters using the Axis Framework
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f]
Kindly HelpHi Yashaswee,
Once you create the SDA archive ( SAP Note 1028961 - How to prepare axisproviderlib.sda for Adapter Framework) you have to deploy it on the J2EE engine of PI.
To check it is correctly deployed or not use the following URL:
http://<systemhost>:<systemport>/XIAxisAdapter/MessageServlet
You will see a screen like this:
An useful case that used the AXIS Framework in the SOAP Adapter to store cookie values is the blog post of Prabhat Sharma:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/08/02/pidoc-integration-between-non-sap-system-and-sfsf-bizx--part-i
Regards.
Rodrigo. -
Some steps for configuring Network are skipped in installation Solaris 10
Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai -
Please help�. I need a steps for configuration
Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
ThanksYou didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array* -
Role for the user used in SOAP adapter
Hi,
What are the roles required to the user used for user authentication in a soap adapter.hi,
if you want to be more specific this is the only role required:
xi_adapter_soap_message (on the adapter engine)
Regards,
Michal Krawczyk -
Need Steps for Configuring BI 7.0 with ECC 6
Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran TelkarHi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy -
How to create SDA file for using AXIS Framework in the SOAP Adapter
Hi experts,
I have the following question:
How I can create the SDA file aii_af_axisprovider.sda for using the AXIS Framework in the SOAP Adpater described in http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm ?
I have downloaded the files axis.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, commons-net-1.0.0-dev.jar and wsdl4j-1.5.1.jar. But how to create the SDA file aii_af_axisprovider.sda? Which tool I have to use for this? It is enough to compress these 5 jar-files in the sda file or need I further files with further information (meta information etc.)?
Thanks and best regards
ChristopherHi Christopher,
Check this discussion if you have not checked already.
Re: NTLM Authentication dosent work with XI ?
Regards,
Ravi -
What is the transport protocol File (Axis) in the SOAP Adapter
Hi,
for a SOAP Receiver Adapter it's possible to choose 'File (Axis)' as transport protocol.
How does it work and is there some documentation about it?
Thanks and regards
PatrickHi,
thanks for your answers.
@Prateek
Yes I tried -> Doesn't say so much
@Vinod
The first thread didn't helped me and I have seen already the second one.
@kummari
The question is how can I use it?
@Gabriel
>The adapter uses transport protocol(File (Axis)) to send SOAP messages as text file
Could you please explain it a little more detailed (maybe with an example)?
My question is about in which scenarios it makes sense to use this transport protocol and how is it used?
Thanks and regards
Patrick -
Steps for configuring LDAP in Portal
hi all,
i need step by step configuration for the LDAP Server in portal
so can u please help me in that.
thanks,
sriram.Hi Sriram,
Following are few documents for configuring LDAP in portal. Have a look.
Check this to Configuring EP UME with LDAP Data Source, in the below link check the left navigation child nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d7b4f47ea91635e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source
Check these
http://wiki.sdn.sap.com/wiki/display/EP/Setting%2bUp%2ban%2bLDAP%2bfor%2bthe%2bPortal
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
I hope these links will help you.
Regards,
Gopal. -
Steps for configuration of version management
Dear Experts,
Kindly tell me what is meant by version management and under which situation this will be used and how its impact in MM after configuring this. Kindly let me know the configuration steps for version management.
Regards,
PrasathYou make the settings here for activating the version management:
SPRO --> MM --> Purchasing --> Version management --> Set up version management for PR -->here make the settings and tick on the activate indicator...
Now define the relevent fields which shd go under version change:
SPRO --> MM --> Purchasing --> Version management --> Version relevent fields of PR's
If you wanna set up change displays and its output, then make settings here:
SPRO --> MM --> Purchasing --> Version management --> Set up change displays...
NOTE: You can only release this PR fully if you tick the version completed indicator in the PR document...
Similrly you can activate for Purchase order
spro-mm-purchasing-version management-purchase order -
Need Document/steps for configuring Samba,apache,tomcat
Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion. -
Steps for configuration of products
Hi ,
can anyone say me the procedure that should be followed for configuring the Products.
bye,
divyaHi Divya,
What kind of procedure are you talking about?
Downloading the master data for configuration or configuring the product?
If its just configuring the product, when u add a configurable product in CRM order, a configuration tab appears. Go to this tab and choose the characteristic value corresponding to characteristics. Click on Check button to see if configuration is consistent and complete. If yes, save the order.
Regards,
Vivek Gupta -
What would be the web servendpoint for a scenario using sender SOAP adapter
Hi,
I have setup a scenario to consume a Service interface in SAP namespace. This is a asynch inbound SI which is not point to point enabled which means the WSDL we get are only the definitions with no endpoints. So I exported it as an external definition which I will then use as sender interface so the scenario looks like this:
Third Party -> SOAP Sender Adapter -> Outbound SI(Imported WSDL) -> XI Box (Mapping etc) -> Inbound SI -> XI Receiver Adapter -> ABAP box
Once all has been setup, for SOAP sender adapter for third party to send data the URL looks like this.
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
But I dont think so this is the endpoint beacuse if I give this in browser I only get an OK status from XI box, what should I give to third party they can use as WSDL endpoint to generate the proxy/stub on their side to send data to SAP.
Regards, ShadabThis is a asynch inbound SI which is not point to point enabled which means the WSDL we get are only the definitions with
no endpoints. So I exported it as an external definition which I will then use as sender interface so the scenario looks like this:
Third Party -> SOAP Sender Adapter -> Outbound SI(Imported WSDL) -> XI Box (Mapping etc) -> Inbound SI -> XI Receiver
Adapter -> ABAP box
Inbound (receiver-end) Service Interface is to be developed from an imported WSDL......not the Outbound (Sender-end) Service Interface.....you actually did the procedure which needs to be done when SOAP is at receiver-end.
If you are clicking the WSDL tab in Service Interface and then taking it as the required WSDL then note that this is not the one.....it is to be generated from ID --> Tools --> Display WSDL (it will be based on the outbound SI)......this will have the end-point which you you mentioned
Now you give this WSDL to the sender application (it will have the end-point) and ask them to develop their coding accordingly.
If you need to view that WSDL in explorer, then you have to publish it somewhere....like in Service Registry (or WSnavigator)
Regards,
Abhishek.
Maybe you are looking for
-
Data reconciliation for Open Orders
Hi, Can any one give me the step by step approach for data reconciliation for open orders in Sales Infocube. I understand that the Open Orders which are dynamic Key figures and the data reconciliation in this case is not straight forward using "
-
Lumia 920: Still trying to figure out what the pro...
Aside from being very upset about Nokia's not allowing updates for the unbranded 920s, I'm still trying to figure out what the problem is with my camera... I had nearly a perfect working phone one and a half week ago. Even though the battery didn't l
-
Wi-Fi access using DLink DIR 615
I just bought my IPad this Saturday. Can't get Wi-Fi access using my DLink DIR 615 router at home. This router supports my brother's laptop w/no problem. My IPad works fine with other hotspots
-
Itunes free music with coke, problems
While i have been trying to download the free tunes of itunes with the codes from coke website. The itune store started black. Now everytime i load up itunes it starts on a black screen and you have to move the mouse around clicking to make it reappe
-
I have created a video that contains audio from the video, music background soundtrack, and my narration voice over. All the sound exports correctly except the narration. There is not sound whatsoever, not muffled or soft, it does not exist at all. I