Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Similar Messages

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

How to skip approving steps for users who are also approvers?

We have a business need to be able to skip the approving steps for the users who are also approvers.
For this following steps were followed :-
1) Open .task file and go into the Assignment tab. Double click on the performer box within the routing slip, this should open the "Edit Participant Type" editor. Expand the "Advanced" section and place a check next to "specify skip rule", then click the edit icon to the right. Now enter an XPath expression that will test whether the current user is equal to the task creator.
2) We used - isUserInRole XPath function in the "Identify Service Functions" dropdown - first param to function is the userID, the 2nd is the role name.
We tried with hardcoded userID as well as by using
ids:isUserInRole(/task:task/task:systemAttributes/task:updatedBy/task:id,'California')
where 'California' is the group name (as one of the forum threads told this function works with groups).
We also tried with swimlane roles(using bpm.getPerformer() function) but it does not work either.
Please let me know if any one has any solution to this problem.

session as DirectorySession = DirectorySession.currentEngineSession
dirHum as Fuego.Fdi.DirHumanParticipant = DirHumanParticipant.fetch(session : session, id : "myUserId")
result = hasRoleAssigned(dirHum, role : "Approver")Give that a try...
HTH,
-Kevin

Steps for configuring LDAP in Portal

hi all,
i need step by step configuration for the LDAP Server in portal
so can u please help me in that.
thanks,
sriram.

Hi Sriram,
Following are few documents for configuring LDAP in portal. Have a look.
Check this to Configuring EP UME with LDAP Data Source, in the below link check the left navigation child nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d7b4f47ea91635e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source
Check these
http://wiki.sdn.sap.com/wiki/display/EP/Setting%2bUp%2ban%2bLDAP%2bfor%2bthe%2bPortal
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
I hope these links will help you.
Regards,
Gopal.

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Steps for configuration of version management

Dear Experts,
Kindly tell me what is meant by version management and under which situation this will be used and how its impact in MM after configuring this. Kindly let me know the configuration steps for version management.
Regards,
Prasath

You make the settings here for activating the version management:
SPRO --> MM --> Purchasing --> Version management --> Set up version management for PR -->here make the settings and tick on the activate indicator...
Now define the relevent fields which shd go under version change:
SPRO --> MM --> Purchasing --> Version management --> Version relevent fields of PR's
If you wanna set up change displays and its output, then make settings here:
SPRO --> MM --> Purchasing --> Version management --> Set up change displays...
NOTE: You can only release this PR fully if you tick the version completed indicator in the PR document...
Similrly you can activate for Purchase order
spro-mm-purchasing-version management-purchase order

Steps for configuration of products

Hi ,
can anyone say me the procedure that should be followed for configuring the Products.
bye,
divya

Hi Divya,
What kind of procedure are you talking about?
Downloading the master data for configuration or configuring the product?
If its just configuring the product, when u add a configurable product in CRM order, a configuration tab appears. Go to this tab and choose the characteristic value corresponding to characteristics. Click on Check button to see if configuration is consistent and complete. If yes, save the order.
Regards,
Vivek Gupta

Steps for configuring Outbound Idoc OILSHI01

Hi experts,
    can anybody tell me the steps how to configure an Outbound IDOC.
    It is better if somebody can take Shipment IDOC of IS-Oil - OILSHI01.
    if not anything else will also do.
    Kindly give me steps in detailed. Since i have never done this. Including
    distribution modle (BD64). in which case it generates the Automatic Partner
    profiles.?
<REMOVED BY MODERATOR>
Regards,
Umesh
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:08 PM

Hi Umesh,
Sorry for the late reply. Let me clear your couple of misconceptions first.
Every idoc is an application idoc. That is, if an idoc is not attached to any application, then it doesnt make business sense to generate that idoc.
Secondly, an idoc is outbound or inbound depending upon its communication direction w.r.t. the sender system. If the idoc is going out from lets say R/3 system (where you are creating distribution model), then its an outbound idoc and if its coming inside, then its inbound idoc.
Now the further steps:
Since its a transactional data idoc, we dont generally go for change pointer activation. Kindly read the documentation to get more idea (if you dont have any then send me your mail id, i will send you a very good document). For transaction data, we use output type to trigger an idoc. Following are the steps to trigger an outbound idoc through output type.
However, remember that in this case, you need help of your functional consultant at every point so that you can clearly determine your application definations and configuration.
1. Go to transaction NACE. There you can see all the generic applications listed. Find out the one relavant to your idoc type from the functional person. If you select your relavant aplication, and click on the "Output types", you will see a list of all the output types for each business transaction defined for that application.
2. Again, ask your functional consultant, as to which output type is configured for your business transaction. Select that output type and go to "Processing routines".
3. There you will be able to see different ways in which the idoc can be triggered. Most of the time , we use processing routine "A (Distribution (ALE))". There you will also see the report which will trigger the idoc.
4. All the above mentioned customization is to be done by the functional consultant (or by technical after strictly seeking the permission). Once the output type is set, you go to the business application (IS-oil) which is triggering your idoc.
There, you will see the option of generating delivery (or something similar, again only the person who has worked on the application can tell that). there you can populate the idoc.
Once the idoc is populated by the application, there are couple of ways of triggering the idoc.
     a. trigger the idoc on saving the doucment. this triggers idoc as soon as you save the idoc.
     b. Collect for mass processing. For this you need to run the report RSNASTED after the idocs are populated to trigger them.
     c. Collect for application specific posting. For this , you need to know the transaction, specific to your business data to trigger the idoc and all you need to do is just run that transaction.
Hope you got the points mentioned above. Kindly go through them carefully and then give me your mail id. I will send you one good document which will clear your understanding.
Hope this was helpful.
<REMOVED BY MODERATOR>
Cheers,
Karan
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:09 PM

Just looking for some advice for a Networking 'noob'

Hey folks,
I manage the post-production workflow for a small agency. We're getting ready to move into a new office space, and we'll be looking to make some upgrades to our video workflow and data management.
At the current time, we have two G5s (PowerPCs) and a new Intel Mac Pro. We may be adding a fourth (or even fifth) workstation. We shoot everything on the DVX (24p DV), but we're also (strongly) considering upgrading to an HD workflow and investing in a few HVX packages so we can have the option of shooting 720p. We will NOT be shooting anything higher than that, (no uncompressed, digibeta, no 1080p, etc.)
Right now, when we need to access media from other computers, we simply use the AppleTalk feature of our internal ethernet and mount the drives remotely. This actually works fairly well, and we usually don't have any issues with latency. But it becomes frustrating at times when we want to search for a particular media file or FCP project file and we can't remember which drive it was stored on. We'd like to have all of our editing workstations be able to access the same media simultaneously in one shared 'Mother Ship.'
I guess my question is: What should we get? Final Cut Server? G-Raid? Xsan?
I'm not really an IT guy, so I can't say I really know the differences between these different options, but any advice you can offer would be most appreciated.
And as for budget, we're prob looking to spend something in the range of $8,000-$10,000 dollars on this new system. (that's NOT including the HVXs, of course.
qp

Ok... here we go, not sure what you are doing except editing DV right now,
but this will work for HDV, DVCPROHD, Uncompressed SD and some ProRes
as long as you have a good Gigabit Router to transfer files. Please consult
a professional if this sounds scary to you.
*Redundant FILE SERVER* for project files, important stuff
1. Install at least 4GB RAM in G5 #1 (max $200)
3. Make sure there are two identical SATA drives in the G5. Install OSX Leopard Server ($499) on 1 drive. Use Carbon Copy Cloner (Free... http://www.bombich.com/software/ccc.html) and clone
the main drive to SATA drive #2 when drive #1 is set up completely. Use drive #2 as backup.
4. Connect CalDigit 2.56TB HDOne External Hard Drive Array (RAID-5) with PCI-X adapter ($2830)
SubTotal: $3600...ish
*Current MacPro* Add unprotected scratch disk for main edit suite
1. Install Sonnet Tempo SATA e4p Serial ATA Host Adapter ($260)
2. Connect Sonnet 2.5TB Fusion D500P eSATA Array System (RAID-0) ($1700)
Subtotal: $2000...ish
*2nd G5* convert to p2 Logging/backup Station
1. Sony BWU-200S Internal 4x Blu-ray Disc Rewritable Drive (599.95)
2. Roxio Toast ($85)
SubTotal: $700
*NEW Intel MacPro* will increase productivity
1. 8 Core 3ghz Intel MacPro ($3600)
Total: Around 9900-10,000
(Buy from PowerMax.com or other out of state vendor to avoid sales tax)
If you want to organize things, then FCS will help. You can install
on G5#2 for 999.00 more. I would focus on hardware first though.

After upgrading to Lion some messages for gmail account are messed

hello
ever since upgrading to Lion (installed GoldMaster first) the new mail app doesn't seem to work properly for some messages, i was hoping someone already experienced this problem too so it would be solved in the realse version, but this didn't seem to happen
i have a number of accounts in mail but the problem occurs only for my gmail (IMAP) account: not all but some messages are not displayed properly. when i choose a message, mail shows all the message contents of some other message from past, though in the list of e-mails it shows sender and subject properly, it shows a wrong message body. the problem affects in some random way, i can't say it shows wrong message bodies for any special addresses or some other logic
this occured only after i upgraded to lion, and i also didn't change any settings for mail, after a clear installation of lion i imported all mail settings from 10.6.8
i attached a screenshot for better understanding of the problem if i couldn't axplain it clearly

same problem here. but not only on gmail. also on other pop and imap accounts (5 accounts of 10): some messages are not displayed properly. when i choose a message, mail shows all the message contents of some other message from past, though in the list of e-mails it shows sender and subject properly, it shows a wrong message body. the problem affects in some random way.
also the sent messages are broken …
man, i got 20.000+ mails and 20% broken …

Steps for configuring AXIS framework in SOAP adapter

hi,
can anybody tell me step by step procedure on how to configure the AXIS framework in SOAP adapter
Also can anybody suggest me an appropriate scenario where AXIS framework can be used
regards,
loveena

an appropriate scenario where AXIS framework can be used
There could be some cases where standard soap adapter does not support a functionality. Like storing cookies value in http header. At that time SOAP axis framework could be used. U may consider AXIS as a new way of impementation of the existing SOAP protocol.
Regards,
Prateek

Steps for configuring shipping cost document

Hi experts
Can anybody Please explain me the steps. Say that shipping cost is based on Route, weight group and carrier. We will be having an condition record for it. So here how do we configure shipping cost document.
awaiting reply
Bhanu

hi,
you have to add a condition for freight in the calcualtion - sheet.
Bring i your condition - records.
While copying form delivery to invoice, you have to set the pricing - roule 'H' calulate new fright costs and in the invoice, there will be a new pricing for the fright-costs ( and the tax ). ( The Condition should have the type fright ).
Hans

Need some steps on configuring Database gatewaye with R12.2

I installed DGateway for SQL server on other oracle home and i have ERP running on other server.
As per doc i need to add tns. Do i need to add this tns to ERP Listerner home ? Or i need other oracle database to run this.

This is probably not the right forum for this kind of question, but you can probably type lsnrctl status and check which parameter file / oracle home it is using. That's the one you will have to modify I suppose.

ALC-LCM-100-011 error for configuring LC to weblogic

When trying to configure LC to managed weblogic application server. I am seeing this error. I tried to change the port from 7001 to 8001(configured for managed server). I tried to put the IP of localhost and tried with 127.0.0.1 and no use. My weblogic is running and I am able to see the page when hit http://localhost:7001/console
Please help me if I missed some thing for configuration.

Hi,
Are you still facing this issue.
In case you do, Could you please check whether the Machine is mapped to the Application Server and further with the managed Server in weblogic.
I had a similar issue some time back, I was able to resolve it by checking the weblogic configuration for the Managed Server running LC.
- Pushkar

Some steps for configuring Network are skipped in installation Solaris 10

Similar Messages

Maybe you are looking for