Stickies no longer save new data
I've got a iMac Intel Core 2 Duo, 4 GB Ram running Snow Leopard 10.6.7. I have used stickies on this for a good two years with no problems. It has resided in the dock all that time. Suddenly, when I add information to a stickie, exit and return - it is not there. If I add a new stickie with new information and come back to it after a power down, it is not there. I've got two "steady state" stickies and that's it. Any ideas on how to restore this program to full functionality? I have looked through the answers presently here, but none were 100% on target. Thanks in advance for any assistance.
Adobe Reader can only save filled forms when this were enabled by Adobe Acrobat.
Similar Messages
-
Cannot any longer save new smart collections
Hi, after reinstalling Photoshop CS6 I cannot any longer save smart collections in Bridge. Always I want to create a smart collection by entering criteria, but when I click on SAVE, it is not saved. After some time of waiting, I always have to cancel, to close the pop-up window that should allow me to save the new smart collection. In my old installation (before I had to install a new hard disk), setting up and saving smart collections never was a problem.
ALL updates of CS6 have been installed. And I am under WINDOWS 7. Version of CS6 is: 13.01 x64
Before, I used a regular hard disk for the system, now I have a SSD, plus several hard disks for data storage.
Can anybody help me with advice what the problem is?
That whould be great. Thanx,
JochenThere is also a Bridge Forum you can search ans ask in Bridge General Discussion
-
Safari no longer saves new Bookmarks (OS X 10.8.3 - Safari 6.03)
I am trying to save bookmarks as I always had done, simply no bookmark gets saved. I reset Safari.
Copy the same line of text to the Clipboard again.
Quit Safari. Disable Safari synchronization in iCloud, if applicable.
Select
Go ▹ Go to Folder
from the Finder menu bar. Paste into the text box that opens (command-V), then press return.
A folder window should open with a file named "Bookmarks.plist" selected. Move the selected file to the Desktop, leaving the folder open.
Relaunch Safari. It will open with the default set of bookmarks. Delete them all. Select
File ▹ Import Bookmarks
from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Arrange the bookmark folders as you wish.
Re-enable synchronization if you disabled it. If Safari now performs normally, you can delete the old bookmarks file. Otherwise, quit Safari again and put back the file you moved, replacing the newer one with the same name. Close the Finder window and post again. -
Stickies no longer will save the notes I write on either an existing sticky nor will it create a new sticky. I love stickies...help please.
Stickies no longer will save the notes I write on either an existing sticky nor will it create a new sticky. I love stickies...help please.
-
I am currently volunteering in Uganda, so data is precious. I can no longer afford unlimited data, I pay by MB/GB. All of a sudden Mail has stopped receiving. I wait until about 60meg, but no new mail. Using Gmail. Connectivity Doctor says connected fine. No probs there. And weirdly, when I want to send an email. I write it, it takes absolutely ages to try to send but as soon as I click disconnect it sends the email. Very odd. I would just love to be able to write all my emails offline and save to drafts/Outbox and then just connect to send and check emails then disconnect again.
I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?
Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
bought a new macbook air because my old computer is formatted. I want to sync my iphone to my new mac, so I can save the data on my iphone without losing data. how can I do?
You need to copy everything form your old computer, or your backup copy of your old computer to your new one.
The iphone is not a storage/backup device. it simply mirrors the selected content of the computer to which it is synced. -
How to save data on a graph and then add new data to it
i am currently plotting data on a graph from a physical system. However when i want to add new data to the plot, the old one is replaced. I am trying to do more than one plot on the same graph, where the incoming data is at different times. I want something like Excel where i can just add a new plot to the graph.Can i save the data or freeze it onto the graph or something so that i can add a new plot and see the two at the same time?
> i am currently plotting data on a graph from a physical system.
> However when i want to add new data to the plot, the old one is
> replaced. I am trying to do more than one plot on the same graph,
> where the incoming data is at different times. I want something like
> Excel where i can just add a new plot to the graph.Can i save the data
> or freeze it onto the graph or something so that i can add a new plot
> and see the two at the same time?
As the other post pointed out, there are two objects in LV for plotting,
graphs and charts. If you wish to have a chart recorder that
accumulates data into one or more plot with time, you probably want a chart.
If you push a button and acquire a trace and want to add that to your
graph, you just need to
combine it with the data you plotted before and
update the graph. It isn't the most efficient, but you can easily read
the value of the graph using a local, add another row or column or
element to your data and send it to the graph.
To directly answer your other question, no, the grah doesn't have a
functional interface for clearing, adding, or deleting plots. Instead,
you do that with the diagram nodes and give the graph the results.
Greg McKaskle -
I have a new iMac running OS 10.9. When I use the Command S shortcut in any of my apps (numbers, text edit etc), it no longer saves the active document it speaks it instead. How can I revert to the save shortcut function?
have you looked in
system preference->Dictiation & speech if it's assigned there?
or system preference->accessibility if it's assigned there? -
How do I save my new data into a new .xls file? i am running my VI in a continious mode
I am using a Data Acquisition Board to get my pressure and displacement signals. Have to measure it continiously. I am able to save the data continiously but not in new XLS file for new experiment. If any of you could hepl me with it
This depends upon how you are writing it to file. If you are using the "Export Waveforms to Spreadsheet File" VI, then you can actually just open this file with Excel and you will see all of the data fine. That's the easiest way to do it. If you are wanting to write to Excel directly, you can use ActiveX calls to do this. If you choose the latter, I would suggest purchasing the Report Generation for Microsoft Office Toolset for LabVIEW. It provides VIs which write your data directly to Excel files.
J.R. Allen -
Do not use iOS 7. Attempting to install iOS 7 will cause your phone to require a factory reset, thus wiping all your data from the device. Save your data, do not attempt to install the new iOS 7.
My phone has been in the Preparaing Iphone for Restore mode for over 2 hrs. I have the following on the itunes page
Iphone Recovery Mode
Itunes is restoring the software on this Iphone.
I have the Itunes icon and the USB cord display on the iphone home screen
So I still have 3 hrs to go??? WOW -
Help! Having Serious Issues and need to save my data!!!
This is probably going to be a long post, and I apologie in advance, but before I give up completely, I need to see if there's anything that I can do to save the data on my computer. Also, I'm writing this from work and don't have access to the system right now, so I'm going to have to rely on my questionable memory to relay the situation.
Since the battery update was installed, I was having intermittent issues with my MBP battery - when I was fully charged, it only showed about 1:45 of time left (down from a usual 3:00 or so). When it would get down to about 50 minutes left, the system would shut off with no warning. I was about to take the system into the Apple Store to get the battery replaced last week, but just to make sure, I followed the instructions to reset the battery and after that was done, it seemed like the battery was fine (showed up as about 3:00 fully charged). But... the system started working very slowly.
As a result, I decided to try to back up the system (I use SuperDuper and backup to an external USB drive). The backup failed mid-stream and my backup file was now useless (that's the last time I use the erase before backing up option). So now I don't have a backup of my data (all of my data is on that laptop).
I tried running Disk Utility, by booting from the installation DVD, to Repair the disk and it stopped with an invalid node error. I tried again, but no joy. A third time, it appears to have completed. However, now when I boot the system, not only is it really slow, but it boots into some unfamiliar linux prompt ("I don't have a name#:", or something like that.
Since I still think that there was a file system problem, I bought a copy of DiskWarrior 4. However, I don't want to wait for the bootable CD, so I tried to install the OS on the external USB drive so I could run it from there. Everytime I tried to install to the USB drive, I got a kernel panic when the IT Tunes install script was loaded. Every time. I tried removing the second (add-on) RAM stick, removing the battery, etc. No joy. Finally on about the 10th attempt, this time on battery power only (no power cable connected), I managed to get the OS to install on the USB drive.
Okay, so now I can boot to the USB drive. I installed Disk Warrior 4 and ran it on the internal hard drive. Kernel Panic. Every time I've run it (error is about unlocking mutex). Even more frustrated now, I tried to backup the disk again (since all my data is on there, I can't afford to lose any of it). No joy. The backup (using SuperDuper or CloneCopyX) fails at various spots. I have some folders on the drive that I tried to copy off (about 7GB) that contain disk images and the like. That copy failed.
So now, I have un-backupable (is that a word) hard drive that I can't repair without kernel panics (although, now as I write this, I didn't try DW without the power cord). And what I need to know is if anyone can think of anything that I haven't tried to save my user data off of the system before I have to take it in to the Apple Store and potentially lose everything that's on it.
My number 1 concern right now is losing the data on the drive.
Can anyone help me at all?
Again, sorry for the long post...
Thanks!
Jim
17" MacBookPro Mac OS X (10.4.9) 2GB RAM, 120GB HD, Glossy ScreenYou may not have the luxury of having another Mac but you must know someone who does. You need to boot your Mac into target disk mode. This is going to be your best bet as far as saving your files. Keep in mind that everytime you mess with this computer you are further endangering your data. Also, once your Mac is booted as a target disk, it may be possible to mount it on a windoze computer just to copy your files to another drive. I used to have one here and if i still did I would try this for you but I "offed" it in favor on running windoze (Parallels) on my MBP. But, one way or another, you need to get next to another computer.
-
Save Input Data to Excel in Siena
Guys,
Quick (and hopefully) easy question regarding Project Siena and Excel:
I have a single screen (Screen1) and an Input Text Field (Input1) and a Gallery (Gallery1):
I am wanting to have a user enter a numeric value into Input1, say 100,000.
Once that value is entered, I would like to save it in Excel, conduct numerous calculations on the Excel value (Input1) and then present the new numbers to the user in Gallery1.
My question: Is there a way to save inputted data into an Excel data source?
Thanks,
ChrisChris,
You can save data in Siena, you just can't write that data to a file such as Excel right now. If I understand you correctly, you should try the following:
Change the OnChange property of Input1 to:
UpdateContext({MyValue: Value(Input1!Text)/2})
Explanation:
This creates and updates a variable called MyValue. The name is unimportant, and you can call it whatever you want, as long as you use the same name when you reference it elsewhere.
It sets the value of MyValue to whatever the user inputs in Input1 divided by 2. The actual math doesn't have to be what I wrote, this is just an easy example.
Create a Label and set its Text to:
MyValue
This will display the value.
To get this to display on another page, you need to pass the context. To do this, create a button, and set its OnSelect property to:
Navigate(Screen2,"",{MyValue: MyValue})
This Navigates to the page called Screen2, and sets MyValue (for Screen2) to MyValue (from Screen1).
This is assuming you only want one number stored, you can also do all of the above using collect(). If you use a collection, you won't have to pass the context between screens. A list of Functional References can be found
HERE:
-Bruton
Just let us know if you also want an example of using this in a collection. -
LabVIEW created .DAT file with saving only new data on existing files
I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data every 1hr and since my test will last for many hours, the further along in the test the longer it would take to save the full file. I know Diadem has the capability to save in such a manner, so I have thought about after I write to Diadem have a small Diadem application save periodically, but I haven't found a way to save the .DAT file, with out any signals coming into the save function. I have attached the example .DAT file creater and saver I am using to figure it out. thanks for your help!
Howdy New Guy -
I am not sure if you are looking to append to a file, or if you would
like to overwrite a file. In either case, you can take a look at
the "Append To File.vi" example for DIAdem.
Either way, you may be experiencing problems because you are only using
the "DIAdem Simple File Write.vi" (found on the DIAdem >> DAT
Files palette). Instead, you can use the "DIAdem File Write.vi"
(located on teh DIAdem >> DAT Files >> DAT Files Advanced
palette). This VI can be set to overwrite or append to file.
I hope this helps in your development!
Andrew W. || Applications Engineer
Maybe you are looking for
-
What is the difference between Mac OS in different languages?
I am thinking about buying a Mac with the new Intel processor. Here in Japan Apple only sells Macs with MacOS X in Japanese. However, my Japanese is far from good enough to use it if it is completely in Japanese. I know that in other Apple Online sto
-
How can I edit a VRO video file in Premiere Pro CC
I have a VRO video file stored on my windows based pc and would like to edit it with Premiere Pro CC. How can I get Premiere Pro CC to recognise this file and allow me to edit it?
-
HT1766 how do you recover your password to restore it
-_______-
-
Is there a way to get my deleted sent messages bac...
I have deleted my sent txt messages and i need to get them back. does anyone know if it is possible to do this??
-
hi, i just tried to generate an idl for my EJB 2.1 using rmic utility but gives me an error using the sdk bundled with the appserver 9.0; Class javax.ejb.EJBObject not found in interface ... Class javax.ejb.EJBObject not found Class javax.ejb.EJBHome