Still have 2 separate lines

Hi,
I have 2 lines for 2 different groups. I did put the summary fields on the footers of both groups. As they are the footers, the 2nd footer now is above the 1st one. Within the 2nd footer, I've clicked that 'Underlay following sections' section option. But now there're still 2 lines when running that. What's the reason of this?
Bst Rgds,
Edward

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

Similar Messages

4 engineers still have unusable phone line

Cutting a really long story short.
Two years I've had a crackling phone line, it disconnects the broadband and it gets worse during damp or raining conditions.
I have had four different engineers all say they did something but it comes back within hours.
I rely on my phone line because I am severely disabled paralysed from the chest down and have an emergency condition which I need to keep in touch with my carers. Currently relying on mobile, but this is unacceptable as signal is getting worse.
Don't like using the disabled card.
Here is what my phoneline sounds like and this is not a bad day. I'm just fed up with it.
https://soundcloud.com/steven-webb-18/phone-line

If you still have problems then repost and mods will help you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

IBM HMC console still have the last line of selectable items either cut off, or overlaying the prior row of displayed items. Prbm extends bck to FF4.

Running Win7 64bit and FF25.0.1

Hold down the '''''<Control>''''' key, then move the mouse wheel back and forth. 
This controls the page size. 
Hold down both '''''<Control + Shift>''''' and move the mouse wheel. 
This controls the text size only. 
Press '''''<Control>''''' 0 (zero) to restore all sizes to normal. 
You can also use''''' Firefox > Menubar > View > Zoom'''''.

Why do my high resolution pdfs have thin white lines all over them?

When I make high res pdfs to send to the printer, they often have thin white lines in them that seem to be very visible when they are displayed in email. This panicks my clients. When the files are opened in Acrobat, they look OK most of the time, but sometimes they still have the white lines. What causes this and how can I make it STOP!!! It is driving me and my clients nuts.
I am using Acrobat 8 Professional on a iMac OSX 10.6.8. My files are pretty standard for print pubs. They usually contain type and images, and the images get the white lines where the text boxes are in the source file. It is maddening.

I forgot to say that I am creating source files in AI CC if that makes a difference, but I have had this problem in the past with previous versions of AI.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

Sales order we have made schedule line category catCN but still reqt coming

Dear Sir,
Sub : For sales order 5000060 line 10 we have made schedule line category as CN but still system is giving requirement against this order (while running MRP T code MD50)
Details:
One user has made one FG material delivery with PGI without putting the picking quantity. He had put zero picking qty. When we click PGI button System does not allow to do PGI without putting the picking qty but how he could do it we do not know. Now there is no goods issue material document instead one confirmation of service document is there in doc flow .we can not open this document. if we click display by selecting this document in document flow system gives error - NO document created for confirm service/cancel transaction
All the delivery fields are gray out. Delivery qty is there in this delivery hence at sale order schedule line tab against the schedule line system is showing delivered qty -2.
Goods movements status is B- partially completed.
Also system is not allowing to reverse the delivery- it is saying-no data available for this selection criteria. Hence we are not able to do delivery against this item. Hence we have created sale order line item 20 & transferred this stock to line item 20 & did subsequent transactions.
Now system giving requirement for line item 10 .We have made schedule line category CN still system is giving requirement against delivery number in T code -MD 50 against sale order line item- there is customer order ,delivery, production order .delivery number never comes in MD50 .it is giving requirement against delivery.
Kindly let us know how to stop the requirement to generate from this sale order line item
Also kindly let us know how user could make this & how this might have happened & how to restrict this in future.
Regards

Dear Sir,
When we create a sale order default sch line category is CN after few days (there is a specific reason) we change it to CP & run MRP
In this case we made the product by doing this but while doing delivery .user did some mistake & did PGI without picking qty in delivery.Now this qty is in delivery but there is no material document that stock has not yet moved .Since there was a problem in the delivery we have trasfered this stock to sale order line item 20.& did further transactions.
Afte this we did schedule line cat from CP to CN
But in MD50 system is giving the requirment against sale order ,delivery
Regards

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

Just to make sure, try a different set of cables. If the problem persists, have the unit replaced by Apple.

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

You might want to download something called an undelete utility. These can find files and recover them even after they appear to have been lost. There are some undelete utility programs that are free. Look at tucows.com
Also, it appears that you have POSSIBLY overwritten the actual files, which you moved manually, with I don't know what, which you moved in PSE's folder location view.
Next, in the future ... NEVER (that's: don't even think about it) move your photos in Windows. NEVER. NEVER. Not ever. Not once. This always (that's ALWAYS, as in 100% of the time) causes problems and usually makes things difficult to fix.
Lastly ... make regular backups! I must say this in the forums about seventy bazillion times a month. Make regular backups! Regular depends on how often you take photographs and edit them. Since my photographic activity usually happens on the weekends, I make backups every Sunday night. You may need a different schedule, depending on your activity level. MAKE REGULAR BACKUPS!

Hi, I have found my older ipod guessing 2nd in line from first generation. Music was on a PC, this tower is long gone but i still have my music on this older device. It opens in itunes but I cannot transfer of drag into my itunes library.

Hi, I have found my older ipod guessing 2nd in line from first generation. Music was Downloaded from BearShare onto a PC, this tower is long gone but i still have my music on this older device. It opens in itunes on my mac laptop but I cannot transfer/send toor of drag into my itunes library. I can only listen to the music from the laptop. If I try to transfer songs to a laptop folder it copies in text. Any suggestions?

The following user tip is worth checking through:
Recover your iTunes library from your iPod or iOS device

How to handle Packing, Frieght etc., additional charges on PO as separate lines - not looking for LCM

Hi,
Following is Business requirement given by client
1.Create Item ( say item code : PACKING CHARGES ) as Purchasable only ( non-stockable )
2.Invoice Match Option in Purchasing Tab of Item is : Receipt Required : No , Inspection Required : No
3.Receipt Close Tolerance is : 100% in Item setup > Purchasing Tab ( Client don't want this line to appear in Receipt Screen )
4.PO Created with two lines one is Inventory Item and second line is PACKING CHARGES
5.As soon as PO is approved Second line got closed for Receiving , First line is the only line visible in Receipt Screen
6.Receipt and Delivery is completed for Inventory item
7.Invoice is entered > Matched > Validated > generate accounting entries is also successfully completed
8.PO is still with Closure Status : Open at header level
9.Inventory Item Closed Status is Closed , PACKING CHARGES line is still with status Ope
Expectation is the PO Closure Status should go to Closed , since we have completed Invoice matching and account generation and there is nothing pending to be done.
Please help.
If you have any Test case document or document explaining similar case with accounting entries, this will be a great help.
Regards
Anil

Hi Anil,
I tried your test case here and below are my inferences.
a) At the time of PO Creation, the packaging item selected will be close for receiving.
b) The Item will be available for matching only if the Invoice Line type is Item, and the controls are defined as 3 Way Match Level with PO match option.
c) Before attempting to match this line, the match level at invoice must be changed to PO.
d) This line will not be created as a freight or packaging line, but it will be an item line type.
These inferences point to the fact that the mapping is not correct. By the book, freight or any other misc charges are finalized only when the item is received and not at PO creation.
Which means that the PO should have the only the item which is being procured and not the charges as separate line items.
At the time of creation of the Invoice, while matching you have an option to check the Freight/ Miscellaneous check box, which gives you a popup to enter the value of the Freight and associated cost type.
By adding this, system adds a new invoice line with the type freight/ misc and puts the additional amount incurred as charges there which is the correct behavior.
Please discuss with the customer and update us based on above facts.
Rgds,
Abhi

I have searched but still have unanswered questions?

First, I would like to comment on what a great resource this forum is. Over the past several weeks, I have learned how to import 8mm tape (using an old Sony Handycam) into Imovie 11, edit, show the full frame, etc. I purchased Idvd on the internet, shared the Imovie project to Idvd and burned dvd's. I have done much reading of old threads but still have a few questions.
There were threads discussing the quality of 8mm vids regarding the interlacing of the lines. Apparently, Imovie dropped every other line. Is this still a concern with Imovie 11?
If dropping of every other line is still an issue, is there a way to prevent or work around?
Now that I have shared the project to Idvd, can I delete the project from Imovie and then save it out of Idvd? My intent would be to save to a separate drive.
Is there a specific method for saving out of Idvd?

After restoring the iPod to factory settings did you restore your data/content from a backup or did you set the iPod up as new?
If you set the iPod up as a new iPod then your issue is most likely hardware related. If you are under warranty you can contact AppleCare or make a Genius Bar appointment to have the iPod replaced or repaired.
If you restored your data/content from a backup then there is still a chance that your issue could be software related because the backup contains bits and pieces of the old software. Try restoring the iPod and setting it up as new.
I hope this helps!

I still have 1 year left on my contract, what are my options to upgrade?

I have an iPhone 5S that I purchased last October. I still have 1 year left to go before I am out of the contract. I really want the new iPhone 6 Plus, mostly because of the bigger screen. What are my options? I read you can trade-in an iPhone 5S and get $300 credit or it will go towards the purchase of a new phone (iPhone 6 Plus) + 2 year contract. Is this possible? If not, what are my options for ditching this phone? Can you ditch the phone itself (and upgrade it) while still keeping the contract you are currently under? Maybe I can turn in my phone for the credit towards the new phone, and still be 1 year into the contract?
Sorry I find all the upgrade info confusing

In short the only option you have is trade in your 5s for the $300 gift card and the buy the 6+ for $749.99 if you're getting the 16GB model, you won't be able to get the discounted pricing for that phone unless you add a line to your account or you're eligible for an upgrade which as you have said you're not.

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

WinXP with two users - can we have two separate iTunes, one for each user?

Question: On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
Details: Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product. My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad. (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.) [By the way, if iTunes will NOT help me do what I want to do, please let me know. But that is not my question.]
I am only one of two users on the PC. My wife is the second user on the PC. She already installed iTunes on the PC for her own use. She is an avid iTunes user. Most of the time, she does not use this PC. She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time. She has also had an iPod for some time, hence her use of iTunes. And now, for the last two weeks, she also has a new iPhone 4S and her own iPad. So her use of iTunes will grow. The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes. Not even for a second.
So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes? If the answer is "yes", please give me a step-by-step and list all details. Is there a YouTube that shows this specifically?
More details: Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago. I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25. (As a result, the following processes/services are now running, which normally don't run when I am the user:
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\iTunes\iTunesHelper.exe
Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
C:\Program Files\iTunes\iTunesHelper.exe )
My wife says her iTunes is NOT set for Family Share. (That sounds correct to me, for now and forever.)
Summary: So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
Thanks !!!

Mr. Wiclee - thanks for the link.
When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever. I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account? Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself? Or will I still need to use Method Three in your link?
The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account. On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad. How can I be sure to accomplish this goal?
In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs. However, so do I in my User even though I have not yet installed any Apple programs on my side. I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
Thanks. Please advise.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario

Still have 2 separate lines

Similar Messages

Maybe you are looking for