Stock account with foreign currency

Hello ,
I have a problem about stock account with foreign currency.
We use standart price and material legder is active.
Our local currency is TRY. We have both TRY , EURO and USD standart price in material master .
I created PO with EUR currency.
When I make GR , system posted standart price to stock account with TRY correctly. But it's again calculated euro price with daily rate and posted new price to stock account.
I have a Euro standart price . Why system is again calculated with daily rate for stock account?
thanks,

solved

Similar Messages

Balance sheet adjustment account for Foreign Currency Valuation

Hi all,
I know that we enter AP /AR balance sheet adjustment account for Open items account when we configure for Foreign currency valuation with Tcode OBA1 and KDF. I wanted to know what account can I enter in that field for other balance sheet account which are not open item managed?
Also, Do we valuate GR/IR accounts in foreign currency valuation?? If yes, what balance sheet adjustment account do we enter for those accounts?
Thank you.

HI,
The valuation of <b>foreign currency balances</b> requires a special key that is assigned the gain and loss accounts for posting any exchange rate differences that occur during valuation. You can freely define this key. You then enter it in the master records of the accounts that you want to valuate. To post the differences that are determined from a group of G/L accounts to the same gain or loss accounts, enter the same key for all these G/L accounts.
Create the Create here with Tcode OBA1 and KDB-Exch. Rate Diff. using Exch. Rate Key
And assign this in the GL account master in the Control Tab.
Thanks
Vijay

Fees account for foreign currencies in payment run F110

Dear all,
I have a problem with a house bank with several bank accounts. At the foreign currency accounts with the same account number, the bank charges are always charged at the foreign currency accounts and not at the Euro account (house currency).
Our desire is that the bank charges are settled in the Euro account.
It seems, that for each record of a foreign currency account to be debited, it requires an own charge account. For foreign currency accounts with different account number to the Euro account is the setting without any problems. In the house bank with foreign currency accounts the fields for the fee accounts were not filled in the payment transfer medium.
How should the setting be, so that bank accounts with different currencies, the fees are cleared only on the Euro account?
We have SAP ECC 6.0 with SAP_APPL 600 Level 12.
If I have missed important information or if my words were indistinct please feel free to ask.
Thanks for any help.
Greetings

Hello Marssel,
sorry, perhaps I described my scenario wrong.
I have only one House Bank with several Account IDs. All but one have the same Bank account number.
For example:
House Bank......................Account ID........................Bank Account No
050.....................................AUSL.................................0444940000
050.....................................CHF....................................0444940000
050.....................................EURO.................................0444940000
050.....................................SCHCK...............................0444940000
050.....................................SGD...................................0444940001
050.....................................USD....................................0444940000
This is the "Bank Account Overview" in transaction FI12.
The house bank country in FI12 is DE for Germany and the ISO Currency Code for the Charges Account is EUR.
The Bank Number and Account Number (0444940000) for the Charges Account are also filled in FI12.
The currencies of Bank GL Account in FS00 are for the foreign currency accounts CHF, SGD and USD. The rest are in house currency EUR.
After starting F110 the bank fees are charged at the foreign currency accounts in CHF and USD. But we want that they are charged over the Euro account in Euro.
Thanks for your help.
Greetings

How to do consolidation using two chart accounts with different currencies

Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
Kesharika

Good Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

GR/IR difference with foreign currency - WBS element

I am working in the MM area and hadling Service entry sheets, GR and Invoice, Finance is complaining and having problem at project(WBS Element) closing time. we are using Project system to control budget. Now finance is not able to close budget code because they are having commitment and giving error. the situation is like below: There is a difference of .01 AED in the Foreign currency amount, finance also claim that system was behaving OK with 4.6C, Now after upgrade to ECC5(4.7) it has started this problem
Goods Receipt:
3,702.73     USD          13,600.00     AED
Invoice Receipt:
3,702.73     USD          13,600.00     AED
Service Entry Sheet:
3,702.73     USD          13,600.01     AED
Please help me to sort out this problem
Mazhar
Message was edited by:
        Mazhar Hussain

Hi
Header exchange rate picked up at time of PO creation with reference to document date in header.
If you fix exchange rate then it will be same for all items in purchase order.
In your case if exchange rate is different then check whether you have done goods receipt in two lots (say 8 items first and then 2 items) with different posting dates. Check accounting documents generated and in that document check translation dates for checking exchange rate in OB08 transaction.
And in invoice what is the currency you are using - if you do not use any special currency (foreign) then PO currency will be picked up. If exchange rate fixed indicator is not there in PO - depending upon system baseline date (posting date) exchange rate will be coming.
Thanks

Error when using automatic clearing (F.13)with foreign currency valuation.

Hello all
below is our problem, please suggest us a solution
We are experiencing a problem when running the automatic clearing in SAP. Somehow, the system seems to clear (with no reason) open items created with the revaluation of foreign currency.
Let's say that we run the valuation of open items in foreign currency for December 31, and we run the program to post the reverse entry as of January 1 of the next year. As a result of this valuation, the system calculates a loss of 10 euros. Therefore, it posts a document with a debit entry of 10 into the Loss account, and a credit of 10 in to account where the valuation was carried out. This document has a posting date of December 31. The batch program also creates the reversing entry, this time a credit entry into the Loss account, and a debit into the original account.
If now, we try to run the automatic clearing (F,13) on December 31 for those accounts, the system will create (automatically) a document on December 31, similar to the reversing entry that the valuation created, clearing at the same time, the first document that the valuation originally created.
The final result then is that the valuation makes a posting, and we end up having two reversing entries. Does it make sense?
In our scenario in the system P70, for MX10, we have a foreign currency valuation run on December 31st, which posted the document numbers:
1) 5100004579/2008, for a total of 0 euros, and 240,483.17 MXN. Credit to account 11081108 Finavigate cash receipt bank collect.CMG MXN.Debit to account 18601000 Losses f.foreign curr.valuation on financial trans
2) In the same batch, the system also books a reversing entry (doc 5100000042/2009) with posting date 01.01.2009 with exactly the same opposite entries as in the previous document.
3) After this, we run the automatic clearing with posting date 31.12.2008, and now, the system creates automatically the document 5000003236/2008, which clear the original document, 5100004579.
The final result, as you can see, it's out of balance, there is an additional document that we need to reverse.
Thanks in advance
sujatha

To my knowledge you get do two things:
1. In F.13 transaction don't include both the GL accounts where the Dr. and Cr. posting from the valuation run have taken place. With this the system won't find the matching entry.
2. If you want to use all the GL accounts in F.13, then check the clearing procedure configuration and make suitable changes.
With the info provided, this is the only thing I can suggest.
Regards,
~Vishal.

Automatic clearing for document posted via FBB1 with foreign currency

Hi SAP Gurus,
Can anyone help to explain on why does the document posted in FBB1 with document currency USD was auto cleared even without satisfying the rule in OB74. But when the document currency is SGD it can be automatically cleared.
Scenarion is as below
OB74 set up:
   Accty type: S
From acct: 12000
To account: 12000
Criterion 1: Business area
Criterion 2: Assignment
G/L account : 12000
Account currency : SGD
Post JV document via FBB1:
     Dr 12000
     Cr 20000
     Document curreny : USD ; amount: 0
     Local currency: SGD ; amount: 200
     Assignment: Test A
     Business area: 'blank'
*When I run F.13 above document was cleared and the clearing doc contains below
       Dr 20000
       Cr 12000
But when I post in FBB1 with same entries as above, only changing the document currency to SGD it will not be cleared via F.13.
Appreciate your explanation on why does above scenario happened.
Thank you in advance.

HI,
while posting the entry through FBB1 then system will not consider the exchange rates as per ob08 and etc.,
you can define the local and foreign currency values as per your wish while posting the FBB1.
I hope above will clear you issue. Thank you.
Reg
Madhu M

Reg. Stock account with sale order (E)

Dear Friends
How to purchase row,semifinished and accessories material against sale order (Acc.assignment cat.E)
If I purchase without account assignment mean materials are posted to it's material type correctly,but when I use E the material account goes to consumption account. How to prevent the material from going to consumption account and should come to under Stock account. Pls help me
Thanks
Rajakumar.K

HI,
First I want to Let you know that it is standard setting that when ever you procure with Blank account assignment category ,it Goes to the Stock account that is defined in the T code OBYC--
in the trsaction key BSX.
But know you are saying that you are using a account assignment category E.
Which says cleary that it has to a Sales order comsuption account.
KNow the question is wheter the you are able to See the Stock in MB52 under Special stock indicator E
or after GRN it is going to the consumption directly.
it happens completly depending on the acount assignment category setting
SPRO--> MM --> Purchaing (OLME) > Account Assignment> Define Acc asign.
in this for the account Assignment E check ..the below
Consumption Posting -- ? ,if it E ..then it is for sales Order.
Account Modificaition--? it would having some Key..
this KEy is the one against which GL the consumption should GO..(here you can change your GL if required)
it is maintained in OBYC-- Trasac - GBB> and in that gainst the key eg --VKA ..the GL is maintained .
and the other thing is Special stock indicatoe -- ? -- if it is E ..then it is allocated to Stock.
Hope so i am clear .on what to be done
Regards
Anjanna

Intercompany Sales with Foreign Currency Differences

We have a scenario using the 2-step intercompany sales process:
1) Create PO
2) Create Delivery and PGI
3) Automatic IDoc Generated for Vendor Invoice
4) Receive PO via MIGO
Selling Company currency is USD. Receiving Company currency is EUR. Due to the lengthy intransit times (3-4 weeks), when the MIGO is posted, the value converted from EUR to USD, is different than the PGI value (SD invoice) in USD. The difference is posted to an exchange rate difference account. However, our business users do not want this exchange rate difference, but wants the value to be constant according to the PGI date.
We cannot switch back to the one-step PGI and GR process because it affects our APO system. In GATP, it would show that the inventory is available in the receiving plant, but it is actually still in transit.
Does anyone have any suggestions or ideas on how to get around this?
Thanks in advance.

Hi,
Can the field Exchange rate fixed in the PO header -> Delivery/Invoice tab be used for your business process?
You can also check OSS Note 518114 - FAQ: Goods movements in foreign currency. This note also contains other notes which may help you.
Regards

Asset account with foreign currecy fluctuations

hi gurus
any body can you please provide the solution to this issue
how will we add foreign currency fluctuation losses to the asset APC value
i)what is the impact of that before dep run
ii)if we added foreign currency losses after dep run what are the implication would involve
thank you

NOrmally the Vendor or the Foreign Currency loan will be revalued and not the Fixed asset. There is no funcltionality to post the currency fluctuation to the asset.
Depreciation run condiders the base method mentioned in the depreciation key. Hence the APC value at the depreciation run will be considered, whether increased or reduced.

Unable to close Goods Receipt PO with foreign currency

hi all,
When we tried to close Goods receipt PO done in June-08 using Euro currency(Data-->Close)
System is throwing error message
"No matching records found 'G/L Accounts' (OACT) (ODBC -2028) [Message 131-183]"
What might be reason for error message ?
As we already did manual JE to reverse Goods receipt PO.
Expecting you all valuable replies.
Jeyakanthan

Hi,
Define the Goods clearing account.
When closing a Goods Receipt PO manually B1 will post to Goods Clearing.
Hope it helps.
Jesper

ITune US Account with foreign CC?

(Sorry, I couldn't find a more appropriate section for my question).
Hi everyone,
I have a US iTunes account. I'm currently working overseas and would like to change my payment credit card to a local one - Saudi Arabia.
If I change my credit card to the Saudi credit card, will that change my account from a US to a Saudi store account?
If yes, what will happen to the apps I've already purchased/downloaded that are exclusive to the US iTunes store?
Thanks a lot for your help,
David

Hi David,
May I ask why you want to use a local CC instead? Well I mean I am in the same situation. I opened my iTS account in England with a UK CC and then moved over to Cameroon for work. I still maintain my UK CC and do my purchases on the iTS normally. I do have a CC issued here in Cameroon but for starters, they have no dedicated iTS. I would advice to simply maintain your US card (you could maintain a card with a relatively small balance as this may be easier to manage) and do your purchases normally as every time you open the iTS, it'll automatically take you to the US store. Plus I do not get charged extra as if this was an overseas transaction.

Creating Employee with Foreign currency

HI HR gurus
Our company code currency is INR and till now employees were paid in INR. Now we got new requirement that is , we have to create some new employees with currency SGD (Singapore dollar) . with this we want to generate all MIS in SGD only .Posting can happen in INR after converting as per exchange rate.
Kindly let me know the possibilities and alternatives.
Thanks in advance
Sneha

Created another company code

Stock card with 2 currencies

Dear Guru,
I'm implementing material ledger. It's a new for me. Please kindly advice stock card report to show 2 currencies.
I see TC: MB5B and S_P00_07000139, it show only local currency. Please advice.
Thank you very much.
Saiyaman

hi,
either create Zreport from table MARA, MBEW and MARM
or
create SQVI query and use same table...
Regards
Priyanka.P

Posting in local currency on foreign currency account/correctionOfValuation

Hi everybody!
I have a problem, and I hope someone will help me.
Is there any way to make posting in local currency on account with foreign currency as the account currency?
The reason why I'm asking this, is that I have to make corrections to currency valuation.
This is the situation: they made foreign currency valuation for last period of previous fiscal year. Instead without reversing, they made it with reversing, on the first day of 1. period in the new fiscal year. After this, they made reversing (fb08) of reversing document created by valuation program. Of course, after all, they have wrong valuation for every next period.
I have to make corrections in 3. period (1. and 2. are closed).
This is my idea: I want to make valuation for date 31.12.2006. with postings in 3. period, without reversing, and than, to make posting of valuated amount, but with opposite sign mark (if the valuation was 1000EUR debit, I'll make 1000EUR credit). I want to have effect of reversing, without running fb08.
Balance for the 3. period will be 0, but every next valuation will be ok (it will valuate difference for 31.12.2006., not difference for document posting date).
If anybody have idea how to make posting on foreign currency account, or the other way to make correction of valuation, I'll be grateful.
Best regards

Create one FI documents with multiple line items as per the following example. In this case you need to enter amount in both local currency and in document currency fields-
If you want to post credit of USD 5.00
Line 1: Local currency Dr. USD 5; Doc currency =x
Line 2: Local currency Cr. USD 10; Doc currency =x
Net impact in local currency is Cr USD 5 and doc currency is nil.

Stock account with foreign currency

Similar Messages

Maybe you are looking for