Asset account with foreign currecy fluctuations

hi gurus
any body can you please provide the solution to this issue
how will we add foreign currency fluctuation losses to the asset APC value
i)what is the impact of that before dep run
ii)if we added foreign currency losses after dep run what are the implication would involve
thank you

NOrmally the Vendor or the Foreign Currency loan will be revalued and not the Fixed asset. There is no funcltionality to post the currency fluctuation to the asset.
Depreciation run condiders the base method mentioned in the depreciation key. Hence the APC value at the depreciation run will be considered, whether increased or reduced.

Similar Messages

  • Stock account with foreign currency

    Hello ,
    I have a problem about stock account with foreign currency.
    We use standart price and material legder is active.
    Our local currency is TRY. We have both TRY , EURO and USD standart price  in material master .
    I created PO with EUR currency.
    When I make GR , system posted standart price to stock account with TRY correctly. But it's again calculated euro price with daily rate and posted new price to stock account.
    I have a Euro standart price . Why system is again calculated with daily rate for stock account?
    thanks,

    solved

  • Asset accounting with parallel ledgers.

    Hi SAP gurus,
    My client has a scenario where assets have different accounting principles, as example, buying an equipment is considered as investment in one perspective and as expense on another.
    To do that we have created two depreciation areas (01 and 10), assigned to 0L - Leading Ledger and Z0 - Non-Leading Ledger. Both depreciation areas share the same GL accounts, as we can separate them by Ledgers.
    All the assets acquisitions are made through PS projects, so we settle to AuC end than to Fixed Asset.
    When we settle the AuC to Fixed Asset, both depreciation areas are getting APC values on both ledgers. How are we now able to "correct" this APC value just on the Leading-Ledger and transport to a cost account, so in that perspective this value is considered as expense?
    Is there any way to do this?
    Thanks in advance.
    Kind regards.
    Cristiano Monteiro

    Thanks for your answer. I didn´t think about that possibility, and it´s a very good idea.
    I will not use that, because I remember that I can make a manual posting via ABSO transaction with a transaction type that is limited to one depreciation area, and than with ASKB make the GL posting.
    Now I´m getting a problem with this. I settle the WBS to fixed asset and the GL document is posted on both ledgers. On asset master data, the value of APC is shown also on both depreciation areas.
    Now my problem is that if I run ASKB transaction it will try to post again the settlement document but only on non-leading ledger, which will duplicate the values.
    How can I solve this?
    Thanks in advance
    Kind regards

  • Asset Accounting with SUB number

    Hi,
    I would like to know how to upload the fixed assets with having sub number.
    Say our client is having a Plant & machinary. Sub grp of any machines say welding machines 10 nos. How should i upload the same thru AS91 so hat i can get sub no wise assets report so that i can see 10 welding machines ina bunch?
    Regards
    Vinayak

    Hi,
    upload of asset main number using as91. Upload of asset sub-number using as94 after the main numer is already created.
    BR Christian

  • ITune US Account with foreign CC?

    (Sorry, I couldn't find a more appropriate section for my question).
    Hi everyone,
    I have a US iTunes account. I'm currently working overseas and would like to change my payment credit card to a local one - Saudi Arabia.
    If I change my credit card to the Saudi credit card, will that change my account from a US to a Saudi store account?
    If yes, what will happen to the apps I've already purchased/downloaded that are exclusive to the US iTunes store?
    Thanks a lot for your help,
    David

    Hi David,
    May I ask why you want to use a local CC instead? Well I mean I am in the same situation. I opened my iTS account in England with a UK CC and then moved over to Cameroon for work. I still maintain my UK CC and do my purchases on the iTS normally. I do have a CC issued here in Cameroon but for starters, they have no dedicated iTS. I would advice to simply maintain your US card (you could maintain a card with a relatively small balance as this may be easier to manage) and do your purchases normally as every time you open the iTS, it'll automatically take you to the US store. Plus I do not get charged extra as if this was an overseas transaction.

  • About asset accounting

    i m working on asset report development ,and i m stuck on one point,any body plz tell me teh relation between asset accounting with internal order ,purchase order and GRR no.

    Hi,
    typical process would be an
    internal order
    purchase order (with IO assignment)
    place order
    receive goods (GRIR)
    create AUC (WIP assets)
    settle IO to AUC (KO88 or KO8G)
    complete AUC purchase
    settle AUC to Asset (AIBU/AIAB)
    post depreciation
    Rgds.

  • Asset report - with asset G/L accounts connected for gross value and amorti

    Hello dear all,
    Is there a way to obtain asset report by asset (and not by asset class) with the G/L accounts connected for gross value (acquisition) and amortization (depreciation) ?
    Thanks
    Edited by: Tarek AYACHI on Jun 1, 2010 10:25 AM

    Look to the report S_ALR_87011990 - Asset History Sheet  for more information about this report look in the wiki part from this forum
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Asset+Reporting
    perhaps you can find with the ransaction ARQ0 - Ad Hoc Reports  you need

  • Asset PO with Multiple account assignment..!!!

    Hi all ,
    i am creating asset PO with multiple account assignment and having pricing condition 5.5% Octroi..
    While doing the MIRO , system should distrubuted octorie amount  to all the assets ( load to asset value )
    But system is not capture the octorie amount in MIRO...
    Any customization required for multiple account assignment in case of Asset PO ..??
    Please help.

    Hi,
    In MIRO, item detail screen, you check for a button which allows apportionment of the value.
    Regards
    Aloysius

  • How to Reconcile Asset accounting data with R/3

    Dear BI Experts,
    We have developed asset accounting reports in BW.
    For user checking need to reconcile with R/3 data.In BW reporting we capturing Asset class,transaction type depreciation are and Net book value start&end year and other values.
    For reconciliation which T CODE is use full ?
    Please provide some information for reconciliation.
    Regards
    Ramu

    Hi,
    You can use "Asset History Sheet" report . i don't really remember the transaction for this.
    If you want to reconcile individual assets, use transaction AS03.
    -RMP

  • Asset Creation with intermediary Asset Holding Account

    Hello Gurus,
    We are on ECC6.0 and SRM 7.0 , business requirement is to procure the asset from the P2P cycle and have an Asset Holding account as an intermediary account. And at Month End post the balance from the intermediary account to the main asset account after review.
    Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same  and than create the asset and than  transfer the posting from Asset holding account  to the Main asset Account.
    Can you please provide inputs how do we address the same.
    Thanks & Regards
    Rutvij

    Hi
    I understand about the AUC after checking various threads on SDN.
    But i am wondering is my requirement addressed
    'Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same and than create the asset and than transfer the posting from Asset holding account to the Main asset Account"
    So if we go with AUC , we need to create a asset number before the procurement process starts.
    At the completion of the AUC once the asset is settled, for the new asset  procurement business will have to create a new AUC asset number.
    Hope I am able to help you in understanding the requirement.
    Any inputs in this regard are helpful
    Thanks & Regards
    Rutvij

  • Material with asset account

    Hi,
    Where is the link between Asset accont and material also PO.
    For 1 material sas differnt 3 asset account, how and where i can link in customizing.
    regards
    satish

    Hi
    While Doing any procurement U will mention A in the account assignement category.
    System will not pick up automatically. U need to enter manually.
    I saw somewhere in sdn, this could be linked thro OMS2, I am not sure.
    Try it out.
    Regards,
    Raman

  • Re - Process asset accounting year end process

    Hi,
    Case- XYZ company is already on K4 fiscal year variant, they want to switch from K4 (calendar year) to V3 (Non- calendar year).  Standard SAP process is to create shortened fiscal year for 3 months. But this is only allowed if no entries posted in new fiscal year. This XYZ company is already in the month of Feb. How can we manage this situation in SAP. Asset accounting is implemented in the system. Planned depreciation has already been calculated for 12 months, how can we rewrite planed depreciation? and depreciation has been posted for one Jan 2011.
    Plan 1- Keep K4 variant as it is and control this with the help of OB52 to restrict posting. This will allow them to run their day to day process with out any errors in fiscal year 2011
    Plan 2 - Maintain K4 as shortened fiscal year and update table T093C to allow system to identify that this 2011 fiscal year is shortened fiscal year. but in both cases question remains what to do with planned depreciation of remaining 9 months?
    Waiting for your feed back.
    Thanks and Regards,
    Sany..

    Hi
    The system will show you the list of Assets which are incomplete.
    I think for the incomplete asset you have not assign the group asset.
    Hence in AS02 transaction enter one by one the incomplete assets and complete the same. then run the AJAB transaction which will allow you to close the asset year.
    if the answer is helpful kindly assign points
    Thanks & Regards
    Mahesh

  • FICO: Asset Accounting : Retirement

    Dear Friends,
    Can someone share the asset disposal posting for the below scenarios.
    1 . Asset disposal end of its life with customer with gain or loss
    2 . Asset disposal mid of its life with customer with gain or loss
    3 . Asset disposal end of its life without customer with gain or loss
    4 . Asset disposal mid of its life without customer with gain or loss
    Thanks,
    Regards,
    Perumal
    help.sap.com

    Hi,
    Welcome you post on the forum.
    However this forum is not a proper one for you. You need to post on the [ERP Financials - Asset Accounting|SAP ERP Financials  - Asset Accounting; forum.
    Please close this one.
    Thanks,
    Gordon

  • Error - Asset Accounting

    Hi All,
    I have an Issue in Asset Accounting.Details are mentioned bellow. Pls help me with your advices to resolve this.
    Fiscal year assigned for our Company Code is Z1 and it starts from April 2007 till March 2008. We have run the depreciation for 8 periods (i.e., from April 2007 to Dec 2007). After posting the depreciation for December 2008, Management has decided to change the fiscal year to April 2007 to Dec 2007. So that we will have the Calendar year as the Fiscal year from 2008 (jan 2008 to Dec 2008). So that i have change the posting periods by shortened the fiscal year.
    As System calculates the depreciation for 12 months and it distributes into 12 periods in that year, postings are done for the first 9 months (Apr 2007 to Dec 2007). And there is balance of 3 months depreciation not posted in the system according to the system initial calculation. So while running the depreciation for 1st Posting Period of 2008 (jan 2008) system has shown error. And so that i have test run the depreciation (AFAB) for the December 2007 with selection of Repeat Run. Results of the test run shows as Amount Posted in Dec 2003 is with correct figures and amount to be posted is with the amount of the 3 months depreciation. So system is expected to post the 3 months Depreciation. Only then we could able to run the depreciation for January 2008.
    But we are not required to post those 3 months depreciation in Dec 2007 as that is the last posting period in 2007 and we have already posted the depreciation for this month.
    Pls help me to provide the solution to change the amounts which are shown in Amount to be posted column if i repeat run for Dec 2007.
    Thanks in advance
    Regards
    Rao

    Check whether you haev made the settings in the following path.
    SPRO-Asset Accounting-Integration with the General Ledger-Valuation-Fiscal Year-Fiscal Year Variants-Specify Other Versions on Company Code Level
    and
    SPRO-Asset Accounting-Integration with the General Ledger-Valuation-Fiscal Year-Fiscal Year Variants-Shortened Fiscal Years-Define Reduction Rules for Shortened Fiscal Years

  • FICO : Asset Accounting - Depreciation Run Issue

    Dear Friends,
    I have an issue in asset accounting.
    Let me explain the actual background of this issue.
    1. I created a new company code(2000) by copying the existing one(1000 along with the closed year 2009
    2. After that when i was trying to post acquisition for an asset i got the below error
    You cannot post to asset in company code 2000 fiscal year 2011
    3. Then i closed the year 2010 and opened 2011, it allowed me to post in the month of june
    4. Now i am trying to run the depreciation for june, its giving the below error.
    According to posting cycle, you should post period 001 next
    5. What could be the reason for this error , is it the correct procedure what i am doing it now?
    Please help if someone has an idea about that
    Thanks ,
    Perumal.

    Hi,
    You can get the solution if you double click the error message.
    Please note that depreciation of current month can only be posted if the depreciation dycles till the previous month is completed. Coming to your case, you have opened the year 2011 and trying to post depreciation for period 6. You need to run the depreciation cycles from period 1 to 5 before trying to post for period 6.
    Regards,
    Kiron Kumar T.

Maybe you are looking for