Stock inconsistency

Hi All,
Previously we have stock at plant and storage location level.
We reversed the stock to acivate the batch management.
For meterial there is no stocki n MMBE at plant and storage location level.
And i checked in MD04 there also stock is 0.
In CO09 stock also 0.
But when i am activating batch management for this material in MM02 in sales:general/plant view im getting error Still stocks are exisist at plant no and storage location no level.
This plant and storage location level is linked to warehouse management.
In warehouse also there is no stock.
How to proceed further?
This is urgetnt ,Thanks in advance.
Please help me.
Please urgent.
null

Hi..
In MMBE Select stock line goto Environment-Material Movements.
Also refer OSS Not-25444 which deals with Inconstencies in Stock quantities.
REWARD POINTS IF U FINDS THIS AS USEFUL....
Regds
MM

Similar Messages

  • Stock inconsistency between MM and QM

    We have QM managed FERT material. So after GR we recieve stock in QI with ref to 04 lot. FERT material is batch managed.
    From one of batch inspection lot business posted stock from QI to blocked (350) with ref to insp lot. Now lot status is SPCO (posting complete).
    After that user changed batch status to restricted and again unrestricted from batch master(MSC2N). Even user posted stock with inventory movement 701 and reversed same with 702. In short user did couple of movements for this batch and finally stock is lying in QI at MB52/MMBE.
    This batch is QM managed and only 1 insp lot exist with SPCO status. I tried to move stock with MB1B - 321 movement, but system doesn't allow because material is QM managed.
    So finally I ran program ZQEVAC20, which saws me qty under "MM-Quantity" column. If I click on pencil button then system giving me information message saying "Deficit of SL Stck.in qual.insp 33,441 KG " but doing nothing.
    Not sure how can I clear stock from QI? Help appreciated.

    Not so sure in this case! The interesting fact to know is how the stock was posted in to QI again?
    The sequence that I understood is,
    Lot created with stock in QI
    Stock moved to Block stock with 350 movement
    Later batch status changed and again revoked. (This may not involve any inventory movement)
    Material movements were executed for stock adjustment 701 and 702 using PIDs.
    If this effect (701/702) was reconciled properly then the stock should be in Block only.
    I suggest to raise it to OSS as you have already tried with note 48815
    Anand

  • How to release Stock blocked against deleted line items from  Sales order.

    We have Scenario as follows.
    Sales order made for  items available in stock.  Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
    What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
    available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
    Overall stock available is same as quantity mentioned in deleted line item.
    In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
                    i.e deleted line item.
    How to release these stock and make available for sales. Any standard process available ? or any other solutions
    Thanks & Regards,

    I got a solution for my question from other forum. for info
    Go to SE38 and enter program SDRQCR21 then execute...
    Enter line item which is blocked for sales order in MD04 and enter plant then check Data
    transfer box and uncheck other boxes... It will pop up information and click yes...
    You will get one report and Stock inconsistency will go off and then check it in MD04....
    regards

  • Not able to clear material from quality stock

    Hi,
    There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still posting not happening fron inspection  stock to unrestricted stock.
    Regards,
    Ravi

    Hi Ravi,
    Please note / clarify following :
    1) If  in material master of QM you have activated  post to inspection (no lot generation with 01 or 04 type insp) then stock will appear in quality, and you should or can only clear it using MB1B 321 movement type.
    2) If already you have activated 01 or 04 or 08 then you will be allowed to post stock through inspection only (QA11).
    3) Check one more important point :
    From old lots somebody might have done result recording and given UD but forgot to do stock posting. you can find such lots with status 'SPRQ'. go to QA32 put particular material, remove range dates and select all insp lots. from the list apply filter to column 'system status' check for ' SPRQ ' in the filter. you will lots where UD given (green radio button)  but stock posting pending.
    Please elaborate if problem if not resolved.
    Best Regards,
    Shekhar

  • Last stock update Date Tab not updating in ICH

    Hi Team
    I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
    There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
    Only this Last stock update tab Date are not updating.
    What is the reason behind this?
    Could you please help me to resolve this?
    Regards
    Virendra Kumar
    09769396038

    Hi Virendra
    It is a bug, please report to SAP and get fix
    which version you are using and what is the patch level?
    1341691 should be helpful check out
    Best Regards
    Vinod

  • Sales order stock not able to use for delivery

    Hi,
    I am facing a issue for special stock of material.
    During cut over activity some documents are created in system. One of them was a sales order and then stock was also uploaded for the sales order.
    In our business special stock was required and hence stock was uploaded using 561E.
    Now in between we had archived these material documents (561E). As an effect in MMBE we are able to see special stock for material but if we click on it no sales order number is displayed. The sales order is still active. At warehouse report that is MB52 sales order number is displayed.
    Now when we are trying to do delivery for this sales order system is giving error message that "sales order stock does not exists" M7 184.
    I am not able to do any type of movement with this stock.
    I tried to correct this stock inconsistency using transaction MB5K and there were no records.
    Please guide me how to get rid of this issue.
    Thanks and Regards,
    Adwait Bachuwar

    You can even archive material documents the day after its creation, there is no defined dependency.
    And your error is certainly not caused by an archived material document.
    I just wonder a bit why a sales order stock is lying for 2 years in your system, this is usually short term stock, goods issued very soon after its production, as it is specially produced for one sales order.
    I am not in a SAP system today as we have a public holiday to double check the values from your screen shots with my system.
    Right now I somehow feel that there is something wrong with the special stock number seen in your MB52 screenshot, there is a space between the / the the first zero
    Also I do not see any batch number and special stock number in MMBE screen
    Can you add a screenshot from your sales order, does it really have this number which is seen in the special stock field?

  • Transfer of Stock from Warehouse to Warehouse

    Hi ,
    I have the following query.
    Warehouse 1 is assigned to Plant 100 and Storage location 10.
    But now the client wants to assign Warehouse 2 to Plant 100 and Storage location 10.
    As per the requirement I changed the assignment. But now I have come to know that there is stock for certain materials in Warehouse 1. Since the assignment is already done, how can I move the stock from Warehouse 1 to Warehouse 2
    Appreciate the help.
    Regards
    Mohan

    "But lets say I assign Warehouse 1 back to Plant 100 and storage location 20"
    I presume by storage location 20 you mean 10
    Yes I believe this will work.
    1) Assign back W/H1 to 100 / 10
    2) Check if there is any stock inconsistency. Whatever stock available in W/H-1 for pl / st locn 100 / 10 should match stock at IM level.
    3) Create new st locn 20 (in your last message it is 30) under pl 100 and assign W/H-1 to 100 / 20
    4) Transfer all stk in W/H-1 from 100 / 10 to 100 / 20. At the end of activity there should be no stk at st locn 10 and no stk in W/H-1 for pl / st locn 100 / 10. All stock in W/H-1 will be for 100 / 20.
    5) Now remove assignment of W/H-1 from 100 / 10 and assign W/H-2 to it.
    6) Transfer all stk from 100 / 20 to 100 / 10 back.
    At the end of activity stock will be in W/H-2 with pl / st locn 100 / 10.
    Reg,
    Sudhir

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • Price of goods mvt will become negative

    Hi exeperts,
    While doing goods receipt MIGO I am getting error that "Price of goods mvt will become negative"  As I analysed the purchase order is account assignment  "K" PO and in material master no value exist with moving average price 0. 
    Please let me know how to solve this issue
    Regards
    Maria

    Hi all ;
    I think that there is a stock inconsistency. Note can be helpful: 1618888 - How to deal with stock inconsistency 
    Also, please check ;
    Tips & Tricks about MM-IM*
    Negative stock analysis ( Material Management – Inventory [MM-IM])
    However ; Go to SE38 , run MBSTOCK and analyse...
    Regards.
    M.Ozgur Unal

  • BADI / USER EXIT for MB01 - after posting GR.

    Hi,
    We have some requirement, where we need to create the Goods Issue using bdc after posting the GR in MB01. can anybody give the user exit / BADI for this.
    i have used BADI - MB_DOCUMENT_BADI : It is triggering while click on the Save button in the MB01, but it is calling before post the GR. the customization part should trigger after the GR post.
    Regards,
    Sree

    Hi Sree,
    Do it the other manner. Store the GR in a Z-table and do the BDC or use the BAPI as suggest Keshav in a periodic job, or call it with a job (OPEN_JOB, CLOSE_JOB,...) in a function module, always with the option IN UPDATE TASK. Think that you have the number of document in this BADI and you must wait some time (1, 2 or 5 seconds) until the database save all data.
    Be careful with this badi (MB_DOCUMENT_BADI), see Note 92550 - Stock inconsistency due to customer enhancement (exit, BAdI) to understand the reasons.
    Regards,
    Eduardo
    Edited by: E_Hinojosa on Feb 2, 2011 2:20 PM

  • Material Quantity difference document line item for HU

    Dear Experts,
    When I try to clear differences in LI21,  i get the error message as above.
    Error Message : 'Material Quantity difference document line item for HU'
    Any idea why this error occurs?
    Regards,
    Shetty

    Hello Shetty,
    It may be due to some stock inconsistency. You may try iin case of  a non HU managed storage location HU to run LX23 and it can fix discrepancy overwrting MM-IM with LE-WM data. But if it is a HU managed then you can run HUDIFF transaction but only to see if there is stock differences not to fix anything, usually SAP Support (Development Support) does that job.
    Have a nice day !!

  • Modify/Change the center cost in purcharse order

    Hi Gurus,
    For this year I have changed the cost center for G/L Account number 600000 (Old cost center: CMERC / new cost center: 1017). Now I have a purchases order that created the year before and these have the cost center old assign.
    When I try doing the goods receipt for purchase order, the system produces the following error: u201CCost Center FDB/CMERC does no exist on 08.01.2010u201D
    Anybody know if you can change the cost center for purchasing order last year, with cost center old, to account pending the goods receipt?
    Thanks for your help.
    Xevi Gràcia.

    Hi,
    Two options:
    Change the PO before to do the PGI.
    If you use MIGO to de the goods inbound, try with the BADI MB_MIGO_BADI (I suggest method LINE_MODIFY, you have GOITEM-KOSTL that you can change). So, set the hardcode (period, relation between old cost center and new cost center, and so on) with ABAP.
    If you use other tcodes (eg: MB01, MB1B and so on), check these notes:
    Note 1284654 - Caution with implementations of the BAdI: MB_DOCUMENT_BADI
    Note 92550 - Stock inconsistency due to customer enhancement (exit, BAdI)
    I hope this helps you
    Regards,
    Eduardo

  • MIGO BADI - Transfer Posting

    Dear forumers,
    I have a requirement as such:-
    Upon a transfer posting in the transaction MIGO, some data fields will need to be updated in RESB and another custom table based on certain conditions. This transfer posting will be for issuing / transferring a part from one location to another.
    As for the data logic, I should be able to work it out. But, I am not sure on how I can find the right BADI for this.
    Would someone have any idea on this at all?
    Please help. Many thanks in advance.

    Hi
    If you use MIGO, you can use the BADI 'MB_MIGO_BADI'. You can use too the BADI 'MB_DOCUMENT_BADI', but in this case be careful (see Note 92550 - Stock inconsistency due to customer enhancement (exit, BAdI) ). This is for custom tables. For RESB data I don't know what you want to do.
    I hope this helps you
    Regards
    Eduardo

  • Creating Assets in MB1B

    Hello All,
    Requirement
    I have to create assets during MB1B with movement type 309. The requirement is for every material entered, one asset should be created and then assigned to equipment record. If in any case error occurs everything should be rolled back.
    So I want to understand which point will be better to reduce the possibility of roll back machanism implementation as that would involve un-assigning asset from equipment master and deleting / retiring the asset.
    Would also like to know if I am thinking on the correct line.
    I have identified BADI MB_DOCUMENT_BADI, which has two methods, MB_DOCUMENT_BEFORE_UPDATE & MB_DOCUMENT_UPDATE. If I put code in first BADI, then for creating assets I will have to call COMMIT and I am not too sure of the outcome as after this BADI the COMMIT WORK is called by SAP Program.
    Please advice.

    Hi,
    Don't use COMMIT in these BADI's as Bharath suggests you.
    See Note 92550 - Stock inconsistency due to customer enhancement (exit, BAdI) to know the reasons (and other things that it suggests us to avoid).
    Other notes that talks about how it can jeopardize your data:
    Note 636442 - Inconsistencies between FI and MM-IM
    Note 968812 - MM/FI Difference for material stocks
    Regards
    Eduardo
    PD: think in that you can populate a customer table (z-table) with this document (with the option IN UPDATE TASK) and after, with a periodic job (for instance, each 15 or 30 minutes) you can create the assets. You can try it with BAPI_FIXEDASSET_CREATE1 or with a BDC report in this periodic job, and if the output is good delete the record or flag it as OK. But split the tasks.
    Edited by: E_Hinojosa on Jun 17, 2011 11:28 AM

  • Physical Inventory IM write off report with values

    Hi All
    I am having difficulty in finding a standard transaction that will detail IM write off with a value/cost.
    I can see tha values in the LI20 trx which is at WM. However, when you write it off at IM (LI21) it only shows material and quantity and not value. I cannot bring the field in using the layout.
    The only way i can currently get the info is to export the data from MB51 (711 and 712 movements) and merge the table in excel with a material cost table and calculate the vaule written off that way.
    I need to know the cost to be written off at IM level before I click on the Write Off button.
    Any ideas?
    Darren

    Not really clear what you want or why you are complaining.
    LI20 is clearing WM differences. Which is a madatory step in the physical inventory cycle. This one will show you the value. and this one is before you post the differences to IM.
    LI21 will not show costs. If you wait with LI21 then you  might get other costs than shown in LI20, however, more critical is the stock inconsistency that you have between WM and IM  until you execute LI21.
    MB51 has the value within, no need to export to Excel and valuated it with a price from another download.

Maybe you are looking for