Stock moved to different Sloc after UD

Hi Friends,
We have a process in which a material, after Good receipt (through MIGO) goes to Storage lcoation 0001 (under quality control). After Usage decision it moves to 0001 unrestricted use. And after that with warehouse activities the same stock is moves to Storage location 0002 Unrestricted use.
By mistake for one material, the stock moved directly to 0002 Quality control after Good Receipt (Instead of going to 0001 Quality Control).
I am new to QM modules, so can anyone tell me what has gone wrong or what should i check to find the cuase ?
Thanks in advance.
Rohit

check storage location in Purchase order or Prod. order of that lot.
or
it must be the the storage location that is entered at the time of gr.
ask purchaser, producion guy or store person to take care of the same

Similar Messages

  • Stock maintaining in different Units

    Hi All
    Stock maintaining in different Units.
    When i do PO & GRPO the item which i purchase is in Kgs (say 100kgs).
    In production  i issue the same item in Liters.
    But in this case i done one process in Item master Data(IMD)->Purchase Data Tab-> Item per purchase Unit i given the conversion factor. At this case this value will directly convert to Liters.
    Eg. PO&GRPO is done an item for 100kgs then in stock is show as 95Liter(i.e, item per purchase unit is multiplied).
    My Issue is:
    After Production is done some how the stock is change say 46Liter is remain. Then i need to identify in Kgs.
    For this case i done small process is this possible to do please help me
    I created one UDF in Item Master Data-> Stock Tab by doing Format Search i Connect the save Query. But this not showing the Correct value.And this has to auto update when the sock is added.
    Please Help me in this. If their is any Query and any other procedure please suggest me how to follow the steps to solve this problem.
    Thanks
    Santhosh.K

    Ok then,
    Select $[$28.7.NUMBER] * (SELECT T0.NumInBuy FROM OITM T0 where T0.ItemCode=$[OITM.ItemCode])
    1. Save the Query in Query Manager.
    2.Open Item Master
    3. Select a Item
    4. Go to Inventory tab
    5. select your UDF
    6. Press ShiftAltF2
    5. Assign the Query
    6. Don,t give auto refresh
    7. Add the FMS window.
    8. Press Shift+F2 or go to Tools>Search function>search
    9. Now it will show the converstion factor.
    10. This is based on Item, u should press Shift+F2 in all warehouse
    11. Update the master.
    regards,
    Thanga Raj.K

  • Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

    I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
    - Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
      this, after normal behavior for more than a year since purchase of the iPod.
    - Different podcasts have been affected at different times, after changes in the state of the iPod.
    - Only podcasts are affected.
    - This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
    - The only change to iTunes, the Mac, or the iPod is that just before this condition began
      I’d begun syncing an iPhone via iTunes.
    I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
    I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
    So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
    By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
    As I said,  this involves only podcasts. All other content on the iPod does appear in iTunes.

    I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
    Need Help!!!

  • BEx Query Columns come back in different Order after drill?

    I have a strange effect when I work with BEx Queries in Xcelsius.
    On default, I open and display the Bex Query "A". Columns are in order like defined in BEx Designer (Column1, Column2, Column3.....)
    I want to do a drill, and so in Xcelsius BEx Connection settings I set the Filter on Field "X" in the XLS and in "Query Usage" I addionally apply the setting "Refresh when Trigger Cell "X" changes".
    Starting the report works fine. But when I do the drill and the Query refreshes, the BEx Query Columns come back in different order?!?
    It looks as if Column 2 and Column 3 are exchanged.
    How can I fix that?
    Thx,
    B. Wegner

    After some testing....
    This issue is independent from the filter value. But it only seems to occure when a second BEx Query connection is defined.
    The BEx Query Data Columns come back in different order after
    - Refresh on Trigger
    - Refresh after XY Seconds
    Any Ideas?
    Edited by: B.Wegner on Nov 16, 2010 3:42 PM

  • System is giving different number after converting to account document

    Hi Team,
    we are not maintain number ranges as year independent ..we are maintain number ranges  in FBN1  year is "9999"
    we have one issue, For example my fiscal year is April to march  before year end closing we have some park documents
    ex number .4455 (document number) after year closing  which is next fiscal year we converted parked document as accounting document 
    but system is giving different number after converting to account document  which is not 4455,
    as per SAP standards and even  we are not maintaining number ranges  year independent SAP should be give the same number
    please give me better solution if you knows any SAP notes belongs to above issue  kindly  let me know
    thanks
    Ranamka

    Hi Suresh,
    thanks a lot your inputs, I will test and come back
    thanks
    Ranamka

  • I can not open different sites after installing itunes. Why?

    I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

    Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • Duplicate qty with Different Price after discount column in Inventory Posit

    Hi,
    I am getting Inventory duplicate qty with Different Price after discount column in Inventory Positing List Reports   When I make A/R credit memo thru DI API.
    With regards,
    Venki .A

    hi
    you can just see the above given data there is a filed total_qty there are two rows showing 0 why it happens i dont understand because i wrote same as for others. all were showng what my input but when the prod_id repeats then it was not taken the total_qty it wll show me 0
    Please Guide
    Thanks And Regards
    Vikas Snghal

  • TS5376 What do you do with those .dll's you moved to the desktop after you re install itunes?

    What do you do with those .dll's you moved to the desktop after you re install itunes?

    If you get iTunes working properly again, it's safe to delete the dll files on the Desktop.

  • Moved house, no broadband after three weeks, despe...

    Moved house, no broadband after three weeks .....Desperate for help!
    Options 
    on 13-08-2012 22h08
    I am posting on behalf of my very elderly (88 years) mother who moved house three weeks ago and has yet to get her BT broadband to work despite at least five calls to the hepline and a visit from the engineer, (it took ten days just to get the phone to work)
     The engineer advised there was a small amount of connection but it needed a boost form the exchange? Which he was unable to do.
    Next call to call centre advised boost was in progress and connection would resume in 1 hour. It didn't.
    Please...What do we do next, my mother although elderly is very dependant on email for communication with family and this is causing great distress, she struggles with the call centre as she a little deaf. Is there a UK based help line as she may get on better with this, as all confidence and patience is now exhausted with usual 0800 number.
    We must have wasted at least five hours on the phone to the call centre and have achieved nothing but frustration.
    Any advice welcome.
    Many thanks.
    Solved!
    Go to Solution.

    Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
    http://bt.custhelp.com/app/contact_email/c/4951
    they normally reply by email or phone directly to you within 3 working days
    They are a UK based BT specialist team who have a good record at getting problems solved
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Project stock belongs to different plant than the plant in project definition

    Dear all,
    I have a case:
    Project belongs to plant A (which is entered in the project definition), but there's a material in project stock which is belongs to plant B (checked in MMBE, the material under this project, but under plant stock B).
    Is this the normal case of SAP standard? As I never seen this case before (always project stock belongs to the same plant as entered in the project definition).
    Awaiting for your answer& clarification.
    Thanks and best regards,
    Andy

    Thanks for your helpful answer.
    I'd like to explain more about this case:
    I found a PO and a good receipt document to the project stock, and the plant in these documents is plant B.
    Then the material appear in MMBE under project stock and plant B.
    But when I check the project in CJ20N, the plant in project definition is plant A.
    As the requirement is to reverse the goods receipt document, but when doing so, system issues a message as "inconsistency data", so I confuse is it because of the different in plant stock in goods receipt document and plant in project.
    That's why I ask is this the standard case if material in project stock belongs to different plant than the plant in project definition.
    Hope you understand clearly my situation.
    Do you have any more suggest in this case?
    Thanks and best regards,
    Nghia

  • Show different content after every 5th web app listing

    I have a web app that list products. I would like to show different content after 5th item from the web app.
    So, it might look something like this.
    <div class="wrapper article-single-wrapper">
    Web app product 1
    Web app product 2
    Web app product 3
    Web app product 4
    Web app product 5
    </div>
    <div class="wrapper sponsored-post-list-wrapper">
    Advert
    </div>
    <div class="wrapper article-single-wrapper">
    Web app product 6
    Web app product 7
    Web app product 8
    Web app product 9
    Web app product 10
    </div>

    You can only do that with javascript, Say you had a hidden contentholder with the add on it. You could use jQuery for example, store the .html() into a variable and then every nth-item (4th) you could .insertAfter()

  • How do you make items on the search result list a different colour after viewing as Explorer does.

    How do you make items on the search result list a different colour after viewing as Internet explorer does?

    Hi and welcome -
    Start with fixing this missing semicolon  (in red)
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
              background-color:#1A1A1A;
              background-repeat: no-repeat;
              background-position: 95% 50%;
    You will find you will get faster, more accurate help from us if you upload your test page and any dependent files to your server and post a link here.  That way we can examine ALL your code

  • Time machine is deleting all my old backups after moving to different iMac

    Hi - I had to move my data to a different machine and so I prepared a different iMac (early 2008). This is what I did:
    I booted into Snow Leopard from my DVD
    erased the HD
    installed SL 10.6
    booted into SL
    ran software update to upgrade to 10.6.8 (to get the App Store)
    installed Mountain Lion 10.8.2
    used Migration Asistant to restore all my data, apps, and settings from my time machine backup
    This all worked fine and at some point time machine asked me whether to inherit the time machine history. I confirmed this and all seemed fine until I noticed that time machine was backing for a long time and a lot of space was being freed on the time machine volume. I found that it was deleting all my old backups. Before I had data going back to 2010 but now I only have backups left from JAN 2012 onwards.
    After some searching I found the excellent Pondini time machine site and performed the actions under B6 ("Reconecting" to your backups):
    exxi:~ michael$ sudo tmutil inheritbackup /Volumes/tm2/Backups.backupdb/exxi
    Password:
    exxi:~ michael$ sudo tmutil associatedisk -a / /Volumes/tm2/Backups.backupdb/exxi/2013-02-03-150320/exxi_hd
    I restarted the backup after applying the command above but it still is deleting old backups. I tried the same comand by associating it with an older backup but still it keeps deleting my backups.
    What can I do to stop it from erasing all my backups?
    Cheers
    Michael

    Just found this info in the Backup dashboard widget:
    Starting manual backup
    Backing up to: /Volumes/tm2/Backups.backupdb
    Inheritance scan required for /, associated with previous UUID: [deleted]
    Event store UUIDs don't match for volume: exxi_hd
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    First backup after disk inheritance for / - complete scan required
    Finished scan
    Found 839161 files (154.88 GB) needing backup
    188.83 GB required (including padding), 145.37 GB available
    Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2012-03-04-160328 containing 2.25 GB; 147.63 GB now available, 188.83 GB required
    Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2013-02-05-181442.inProgress/57E7F008-929C-4 DF8-B062-F034FEE7A606 containing 4 KB; 147.63 GB now available, 188.83 GB required
    Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2013-01-07-112745 containing 130.8 MB; 147.76 GB now available, 188.83 GB required
    Removed 3 expired backups so far, more space is needed - deleting oldest backups to make room
    Deleted backup /Volumes/tm2/Backups.backupdb/exxi/2012-03-11-191620 containing 2.08 GB; 149.86 GB now available, 188.83 GB required
    Removed 4 expired backups so far, more space is needed - deleting oldest backups to make room
    Backup deletion was canceled by user
    Deleted 4 backups containing 4.46 GB total; 149.86 GB now available, 188.83 GB required
    Backup date range was shortened: oldest backup is now Mar 31, 2012
    Backup canceled.

  • MOVED: Computer wont start up after being moved to different location

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=172218.0

    Sounds like it could be an issue with the computer. I would try it on another computer to see if the iPod is recognized.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Remote Site malfunction after moving to different server

    We had to move the remote site from one server to another by backing up the current remote site and restoring it on another server. Since then the users on that remote site are unable to receive notifications. The tickets are coming over just fine. On the central site under the remote sites and agents setting page, when you click on the site name it is still trying to go to the old server but according to the remote site everything is communicating properly. I need to do one of two things:1. Edit the central site so that the link points to the correct location under the remote site setting page2. Delete the remote site on the central server and re-establish the connection from the remote site. I'm not sure what that will do to the data so I was hesitant to do this one.Does anyone know how to accomplish the first option or should I just...
    This topic first appeared in the Spiceworks Community

    Please share what task fails, profile your network speed, and the new environment specs.
    Also depends on SSIS version you can have (in 2012 and above) the operational reports that indicate each tasks speed, otherwise add more logging.
    On the surface, the issue is with the network speed or how busy the new machines are.
    PS: you shared too few details to be of more help
    Arthur
    MyBlog
    Twitter

Maybe you are looking for