STOCK QUNTITY on posting date at a plant level

I need the stock quntity , issue quntity , reciept quntity and averege quantity at plant level for a period of week, and month
Is there any function that can do it or any table that has those detailes or any program?

Hi,
Check S031 table. It is a LIS info structure which store all goods movements in your system. But the key would based be on the variant your system configured to. I mean it will be either by Fiscal period/ Week/ Calendar Month for plant material.
Hope this will give you some clue.
Regards,
Nagaraju Chidurupalli.

Similar Messages

Stock Value on Posting Date

Hi SAPians,
I can get Stock Quantity on Posting Date from report MB5B.
Is there any Report which can give me Stock Value on Posting Date?
I have searched a lot but yet not found it.
Please help in this regard.
regards,
Jignesh

Thanks a lot friends for your answers.
i have execute report and analyzed it but i have one query.
If i am executing report for 31.03.2008.
The shown material Stock Value on 31.03.2008 is on the basis of MAP at 31.03.2008 or on the basis of MAP at Current Date.?
Thanks in advance.
Regards,
Jignesh

Bapi/function module to get opening or closing stock for a posting date

I am creating a report where i need to get the opening stock value and closing stock value for the given starting date and ending date respectively for the PP report.
The T-code for that is MB5B.
So,can any1 plzz tell me how i can get the stock value for a starting date/ending date...
Is there any BAPI or function module to find this out..
or any logic?
Thanks.

Hi Kiran,
You would like to findout opening and closing stock of a particular period and of a particular period....
If we would like to findout opening and closing stock of material A as of 18 / 8 / 2008,
then do like this.
go to MBEW table .. there u get opening stock as on today. Today the date is 20/8/2008. from today's opening stock if we add / subtract the movements which have happened on 19/8/2008 and 18/8/2008 u'll get opening and closing stock as on 18/8/2008.
U get the movements from MKPF ( material doc header) and MSEG (material doc item ) based on posting date. In MSEG u get movement type.
If the movement type is 101, it means the stock is added.
If the movement type is 102, it means the added stock is reversed.
from today's opening stock deduct the stock with moverment type 101 and add the stock with movement type 102.
This will give u opening stock as on 18/8/2008.
To get closing stock of 18/8/2008 ..... the opening stock of 19/8/2008 is 18/8/2008's closing stock.

Unable to view stock on a posting date

I'm implementing inventory scenario in BI.
Initialized the stock in R/3 and uploaded into cube 0IC_C03 through 2LIS_03_BX.
Also initialized 2LIS_03_BF and uploaded into the same cube.
When i run a query, I see opening stock.
But if i change posting date to view stock for that date, I dont see any change in quantities.
Seems like the material movements are not being captured into BI.
Please help...
Thanks in advance

Elangovan,
yes, with 2LIS_03_BF, 888 records were added.
I compressed both requests, 2LIS_03_BX WITH marker update and 2LIS_03_BF with NO marker update.
You asked about maintaining markers, not sure if there was anything else to be done?
Also, please help me with the transaction keys...not sure what that is. I'm new to inventory management in BI.
Thanks

Stock on posting date GL wise

dear sir,
can i have the transaction code for stock on posting date GL wise.
IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATE

Hi,
There is a posting date in MB5B !!!!!!!!!!!!!!!!!
The whole point of MB5B is to give you the stock on a posting date.
The field is called "Selection date".
Steve B

Restrict goods issue if stock on posting date is zero

Requirement:
Current Inventory period : July 2011
Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B report)
I upload stock of material or GRN occur on 31.07.2011. Say Quantity u2013 100
Now stock as on 31.07.2011 is 100 in MB5B
Still, Stock of a material from 01.07.2011 to 30.07.2011 is zero(in MB5B)
Now, If I do goods issue of a material quantity 100 on 15.07.2011. System allows goods issue. though opening and closing stock as on 15.07.2011 is zero.
After goods issue transaction if I check stock of material on any date between 16.07.2011 to 30.07.2011 , The opening stock and closing stock shows negative.
I want to restrict goods issue if stock on posting date is zero or less then stock available on posting date.
Please suggest

Hi,
This is not the way SAP is designed. As the previous speakers wrote (and as you noticed yourself), SAP maintains stock figures in the database per month rather than per day. MB5B makes complex calculations in order to find out how much stock you had on a specific date - as you probably noticed on the response time. Performing such calculations every time you do a GI would be unfeasibly heavy task for the system - remember there are organisations that perform hundreds of inventory movements a minute!
An alternative solution I suppose would be to maintain the daily stock figures in the database. This would make the finding of the stock figure very quick, but on the other hand, the maintenance of such table would be unfeasible - if you post today a GI on say July 1st, you would need to calculate 36 stock figures and update 36 database records!
Hope this explains the technical issue.
BR
Raf

Data Mismatch: Plant level stock and Serial Number collection

Hi,
I am working with stock in SM.
I want the plant level stock and the serial number collection for the serialised material. The value coming for the plant stock is 20 (Eg. MATNR = 50004050) and the corresponding serial number collection is 27. But the values in plant stock and in the serial number collection should be one and the same.
For getting the plant stock I'm using the MARA and MARC table. For getting the serial number collection I'm using EQUI and EQBS table.
When I increase the stock using the transaction MB1C and movement type 561, I'm giving the serial numbers for the material. The issued serial numbers are coming in the serial number collection correctly but the stock at the plant level is not getting updated properly. Please let me know from where I can get same stock.
Thanks in Advance,
Mohan

This could happen, if the status of serial number is wrongly updated to ESTO. From where are you taking serial numbers?Physically what is right the qty showing plant stock or the qty showing serial number? May be you go and check the history of the serial number to see if it is really available in stock.
Also it can be serial number is optional so though the stock is reduced but serial number is not captured while issuing so the stock at plant level is less but serial number is more,
If this is the case, reconciallation directly from tables will be difficult.
Regards
Sangeeta
Edited by: Sangeeta Khurana on May 4, 2011 12:34 AM

Stock at a certain date.

Hi,
how can I find the quantity of stock at a certain date ?
Yours truly

Hi
Use transaction code MB5B for stock on a posting date.
Thanks & Regards
KK

Stock upload - Goods receipt date, FIFO

We are doing our initial stock upload using LSMW based on goods movements.
When posting a goods movement the posting date will be used for FIFO considerations.
That's fine when your system is operative, but during the initial stock upload the posting date will be the same for all movements, which is not what we want.
Is there a way to transfer a GR date from the legacy system?
(Opening the posting periods to any date in the past is not an option).
Any ideas?
Thanks
Andreas

If you had a GR on May 2nd of 1000 and another GR on Oct. 1st for 500 and your currect stock is 800, then you just know that the last GR date was Oct. 1st. But this is not the truth for all stock on hand. So FIFO cannot work. So the field has just information caracter.
SAP will capture such info at batch level. Different software, different concepts. so each batch can have its own last GR date, and you distinguish the stock by batches, and can use batch search strategy to find the oldest one.
Without batch managment, SAP has this information about last goods receipt at quant level in warehouse managment. Do you use WM module?
(even then I have no standard solution to manipulate this field while doing the stock load)

Inventory: Movement after count with post date before the count date.

Hi,
We have stock movements all the days of the week.
We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
Thanks in advance for your support!!

SAP takes the book inventory in the moment you enter the count.
Best you set block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
This is not a good way if you still have movements after inventory document creation and actual count.
You have to make sure - organisational wise, outside SAP - that all movements that happened before inventory count are posted before you start entering the count. There is nothing in SAP that can help you in this case.

Need to check PO Posting date at schedule line and material document level

HI All,
I am facing an issue to reconciliation data with ECC.
Issue :
we have a PO,item,schedule line with delivery date, scheduled qty and quantity received from EKET table
we have PO,item,Material document,movement type,posting date with quantity received from EKBE table
the standard extractor 2LIS_02_SGR is providing data at
PO,item,schedule line,material document,movement,posting date
as if now we are using this extractor to get the posting date at schedule line level.
can some one let me know how exacty the EKET and EKBE table are joined ???

Hi,
The data for the datasource 2lis_02_sgr can be compared in ECC using ME80FN transaction.
Please check the below Link for all the details reragrding 2LIS_02_SGR datasource.
[http://help.sap.com/saphelp_dm40/helpdata/en/69/063f3f2615e07fe10000000a114084/content.htm]
Hope this helps..
Thanks,
Nagarjuna

Client level data & Plant level data

Dear ,
what exactly client level data & Plant level data.
In Material master Whats the reason that Purchasing is displaying in Client level data & also in Plant level data
*Client level Datas:--
Classification
Purchasing
Basic data
Storage
Plant level Datas:-
Accounting
MRP
Purchasing
Costing
Storage
Forecasting
Quality management
Sales
Regards,
Suresh.P

hi
the client level data is the field data which will be common for all plants
plant level data is the field data which is plant specific
also in purchasing view many fields are plant specific
to check it just do one goto mm03
give material and only select the pur view
at now give only plant and check fields
now repeate same without plant ,at this time u will see the client specific field
the UOM is the client level filed ,it is also in mRp view but as the mrp is used for plant it is in plznt specific data
hope it clears
regards
kunal

How to find the date difference in query level?

Hi All,
I have to find the difference between Delivery Date and Posting Date in the query level. Canyou please let me know whether it is possible or not?
Thanks in advance!!
Regards,
Ramanathan.R

Hello,
If both infoobjects are key figures , then you can do the calculations. Create new formula and do the calculations.
If infoobjects are characteristics, then also you can perform the calculations but you can do this by creating a formula variable using replacement path.
Thanks,
Praveen Tati

Partner determination at plant level

at present we are having partner determination at p.org level and plant level.
In our business we have a one vendor with 2 ordering addresses for 2 of our plants.
we had maintained these ordering address at vendor master --plant level.
when we are creating manual PO system is picking up the order address where as when we are creating automatic PO using ME59N transaction system is picking partner function maintained at p.org level rather than maintained at plant level.
plz suggest the solution.

Hi,
Check the intial requriment are there r not like source list before craeting the PO.
Check whether the Partner function are maintained at plant level in XK03 in partner fuctions selection field and also check whether you had ticked the data revel at plant level allowed.
Hope this will hep you.
BR,
Patil

Any Standard FM for material stocks on posting date using Tcode MB5B

Hi,
I need   Standard FM to get material stocks on posting date using   Tcode   :   MB5B
Stock type i am using is : Storage Location/Batch Stock
the Input   i am providing is    Material, Plant , Storage Location, selection date From , selecDate To.
Then   i need to get data that it provides   header and document item level.
Can u please tel me how do i get that material stock data on posting date and in which tables
it will be populated in the database.
ITs required can u take view and post info
Thanks & Regards
sivakumar kasa
Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

hi Rehan,
I have checked all settings also enhancement but there is no as such control to restrict backposting within current period
I think its self disipline action not to post backdated GI when GR is done on later date
Vishal...

STOCK QUNTITY on posting date at a plant level

Similar Messages

Maybe you are looking for