Stock transfer with excise duty

Hi Experts,
i have to do stock transfer from one plant to other plant when excise duty is invloved. and both plants comes under one company code.and receiving plant not paying any thing to supplying plant.please suggest me which process shall i follow.
Thanks and regards,
Balakrishna R.V

Hi,
The receiving plant should also registered for ED. Then when u do STO, after issue th goods, do J!is & j1iv. Later with the help of that document Capture Excise in other plant. So there in supplying plant the ED is deducted & in receiving plant the ED is taken as per law.
Regards
Pandari

Similar Messages

Excisable Stock Transfer with Excise Duty to Other State Warehouse

Dear Experts,
We have a factory in India which has to pay excise.
We have depots in several location in India.
We transfer finished goods from Factory to Depot and have to pay excise.
When selling from Depot we do not charge the end customer the excise. (Only VAt and this is Depot is a Seperate company in Tally )
However, I will be paying the excise at Factory
The costing of the FG transferred to Depot has to be increased as I'm bearing the cost of excise and not passing it to the final customer.
We are implementing SAP B1 9.0 Please Suggest how to manage this in SAP 9
In tally we were managing these by creating Different Company but in SAP we need to manage in Same company
Is there any other workaround, by using inventory transfer form ? then how will be the excise postings
Please Suggest
Regards,
Chetan Popat

Hi Chetan,
On SAP you can do stock transfer with payment of duty selection on stock transfer form. and then you can create corresponding excise invoice. Make sure you are transferring stock from one excise warehouse to another.
Regards,
Chintan

Plant to plant stock trasnfer with excise duty

Hi,
We have one company code and two plant assign to it , now one plant is Ma=fg. plant and other plant is depot plant , now I have purchase material with excise duty in mfg. plant and excise is capture with J1IEX aprt1 and part2 is done   now our requirement is we wan to sal that material thorugh depot plant so for this the entry should be there in RG23D so can you giude or give some link for this so that material from plant A to be trasfer to depot plant , with excise then we can sale that material thorugh trading plant.
regards,
zafar

Hi,
        Steps to Stock transfer from one plant to another plant as below... ..
1. First enable Sales View of material that you want to transfer (MM01) and fill required data i,e.
Plant  Select Plant where Material transferred.
3)     Sales Org. Data1 Menu  Select Division u201851u2019 Cement.
4)     Sales Org. Data2 Menu  Select Gen Item Cat. Grp u2018 NORMu2019
5)     Sales General Plant Data 
A)     Availability check u2018KPu2019
B)     Loading GRP u20180001u2019
C)     Profit Center u2018Plant Codeu2019
2. Create Condition Records (VK11)
3.Create Sales Order                 (VA01)
4.Create Outbond Delivery     (VL01N)
5.Create Billing Document      (VF01)
6. Excise Invoice                          (J1IIN)
7. Printing of Excise Invoice and Commercial Invoice                           (VF02)
Regards

For STO with billing how to take material in plant stock without cancelling excise duty

Hi,
Please suggest for STO with billing how to take material back in plant stock without cancelling excise duty.
Scenario is
Material transffered from manufacturing plant to depot,material is in transit now, but due to some reason material calls back to manufacturing plant.
Since the excise invoice is raised and material move out of factory client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement.
Please suggest how to take back goods to manufacturing plant without cancelling excise invoice.
We have suggested client as there is no provision to take back goods to manufacturing plant without cancelling excise invoice
and to take back material to manufacturing plant stock they have to cancel excise invoice and other related documents.
But client is asking for another options.So requesting you to please suggest any alternative ways for same.
Thanks,
Amit

client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement
I don't think, there is a statutory rule which says, manufacturer should not cancel the excise invoice generated on their Depot plant. Justification can very well be given to Excise authorities and hence, ask your client to follow the normal process by treating this as Depot returns.
G. Lakshmipathi

Stock Transfer of Excisable goods from Depot to Depot

Hi,
We are facing an issue with Stock Transfer of Excisable Goods from an excisable depot to another excisable depot which had arrived from an excisable manufacturing plant.
We are following the below steps:
1. Create STO PO at Depot A (ME21N)
2. Delivery of Goods from Depot B (VL10B)
3. Create Depot Excise Invoice at Depot B with reference to Orginal Manufacturing Excise Invoice (J1IJ)
4. Goods Receipt at Depot A (MIGO)
5. Capture Excise at Depot A (J1IG)
We are getting stuck at Step 5. When we are performing J1IG and entering Depot Excise Invoice or Original Manufacturing Excise Invoice, we are getting an error message as "Excise invoice does not exist in Supplying Plant".
Kindly suggest how to capture excise at Depot A.
Regards,
Debarshi

Dear G. Lakshmipathi,
We have tried your solution but we are still stuck at the same place.
In J1IG, if we enter the Depot B excise invoice and press enter, we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Original Manufacturing excise invoice and press enter, then also we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Depot B excise invoice and give a tick in the "Depot Excise Invoice" and press enter, we are getting into an infinite loop.
Kindly suggest how we can capture the excise at Depot A.
Regards,
Debarshi

Sub-contracting with excise duty..?

Hi all
can anybody explain me the sub-contracting process with excise duty , here we are going create excise invoice(J1IS instead of sub-contract challan) and what abt material document for sending out materials
whether v an use excise invoice as material transfer document to jobber place or what.
Please explain me with example ..
Regards
sap-mm

hi ,
you can try:
1.Do the MB1A with 202 mvt type to get back the material from the Work location Cost center to Storage location.
2.Create the Subcontracting PO without payment of excise duty ie., with subcontracting challan. Here the components provided to the vendor & material at item overview should be the same.
3.Do the MB1B - 541 Mvt type transfer posting.
4.Create the subcontracting challan w r t material doc by J1IF01
5.Do the MIGO for SC PO.
6.Reconcile the SC Challan.
7.If the qty is fully reconciled then you can complete the challan.
8.Do the LIV for SC PO.
9.Do the MB1A with 201 MVT type to issue the material to the Work location.

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock Transfer Between Excise and Non Excisable plants

Hi Friends,
I have created STO for excisable plant from non excisable plant. delivery created in excisable plant. But in non excisable plant, I am unable to capture excise invoice.I want the price in non excisable plant as Price+ excise. How to do this? please reply...
Regards

Non exciseable plant will create a STO and give it to Exciseanle plant.
The Exciseable plant will transfer post the stock
Along with Excise , J1IS created.
The receipt plant,The Non Excise plant will do the GR . the stock + excise will get added up in the non exciseable plant .
Rewgads

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

REVERESE SUBCONTRACTING WITH EXCISE DUTY

Job Work done by Client with excise duty
Business Process,
                             Raw material got from the Customer & it is processed by Client finished goods are made the same will be delivered to the Customer with excise duty.
Details:
1     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
2     Customer will send the material with excise invoice (paid by customer).
3     Client receives the material post the customer excise invoice with part-1 & part-2 entry in the RG23A register.i.e Cenvat credit taken by Client for the customer material.
4     The received Raw material processed by Client converted to finished product with RG1 entry.
5     Finished send to the customer with excise duty paid by Client
6     As excise duty liability is with Client every month excise duty difference between credit taken & paid is settled with customer.
E.g. For August month
          Cenvat credit taken for raw materials Rs-10000
          Excise duty paid by the Client Rs-50000
          Difference to be paid by the customer to Client is Rs-40000
Pl guide me how to map this process in cin
Regards
Umapathy.M

Hai,
The pre requisties for this scenario in CIN part is
1. Create the input raw material with UNBW material type.
2. Create the customer as a vendor.
3. Maintain the input material in J1ID with material type raw material & chapter ID.
4. Maintain the excise details for this vendor with excise indicator.
5.Maintain the assessable value for this material in J1ID. This has to be flow for excise calculation.
6.Maintain the excise tax rates for the Chapter id in J1ID.
7.Mainain the 501 Mvt type in IMG - Logistics general - Tax on goods & movements - India - Business transactions - Incoming excise invoices - specify which mvt type involves excise invoices.
8.Maintain the settings for register entries & GL accts in Acct determination in IMG - Logistics general - Tax on goods & movements - India - Acct determination for the excise transaction type EWPO.
The steps involves are
1.Create a sale order with excise tax code conditions for the processed fininshed product.
2.Do the MIGO with other receipt for 501 Mvt type to receive the raw material. Capture the excise invoice in the MIGO itself.
3.Post the excise invoice by J1IEX.
4.Do the process with PP cycle.
5.Send the finished product with SD route.
6.Do the Billing & outgoing excise invoice.
7.The SD Pricing procedure has to be configured as per the requirement.
8.Check the accting entries at the Customer acct.

REVERSE SUBCONTRACTIN WITH EXCISE DUTY

Job Work done by Client with excise duty
Business Process,
                             Raw material got from the Customer & it is processed by Client finished goods are made the same will be delivered to the Customer with excise duty.
Details:
1     Sales order will be created with the details of raw materials that customer agreed to give & finished product that customer need after getting the P.O from the customer.
2     Customer will send the material with excise invoice (paid by customer).
3     Client receives the material post the customer excise invoice with part-1 & part-2 entry in the RG23A register.i.e Cenvat credit taken by Client for the customer material.
4     The received Raw material processed by Client converted to finished product with RG1 entry.
5     Finished send to the customer with excise duty paid by Client
6     As excise duty liability is with Client every month excise duty difference between credit taken & paid is settled with customer.
E.g. For August month
          Cenvat credit taken for raw materials Rs-10000
          Excise duty paid by the Client Rs-50000
          Difference to be paid by the customer to Client is Rs-40000
How to map this process in CIN
Regards
UMAPATHY.M

,

How to do Payment against Proforma invoice with excise duty?

Hi all
I am using SAP B1 9.0
I have a scenario like, I want to make a proforma invoice partially/fully for the customer order(sales order) with excise duty and I will receive payment against this invoice.
I tried to use AR down payment request , thus I can create proforma invoice for partially/fully and I can do incoming payment also, but the problem is I can't use Excise duty(CENVAT) in down payment document. Is there a way or work around for my issue?
Thanks in advance.
Pravin

Hi,
In standard SAP B1, we can't select Excise tax code in Down payment request document and it will not allow also
Find below the workaround solution:
1. When you are raising Down payment request, enter DPM value including Excise Duty. i.e. If the base value is 1000 and Excise duty 120, enter 1120 in DPM value, the percentage will become 112%. In case of partial also calculate partial excise duty and add in base value and enter in DPM value.
2. Based on Down payment request book the incoming payment
3. Adjust Down payment request in final AR Invoice it will get adjusted in total value.
Note: The Excise duties will book at the time of OEI booking (as per legal req). We can't book the excise at the time of Down payment.
Regards,
Kiran

Excise treatment during subcontracting process with excise duty

Dear all,
Iam aware of the subcontracting process STEPS, but my query is while dealing with Excise in Subcontracting process, will the Excise duties captured in J1IS(create outgoing excise invoice) be RECONCILED with excise duties captured in J1IEX(subcontractor's excise invoice). As per my scenario both the duties are different unlike reconciliation process in the process without excise duty. My questions are
1.Do both excise duties during j1is and j1iex should be same or can it be different (since in j1is we capture Duties on raw material's assesable value where as in j1iex we capture duties semi finished goods given by sub contractor.)
2.Kindly eloborate treatment of excise duties captured in these steps.
Revert if you didnt understand this scenarion.
Regards,
Sravanthi.Y

Hi,
57fc challan will be issued when we send raw materials to subcontractors WITHOUT EXISE DUTY.Hence not relevant in my case. But my case is WITH excise duty.we send subcontractor the excise invoice by using j1is. later he will process these raw materials and will give back the semi finished goods along with excise invoice(which we will capture n post using j1iex). so my question will excise duties differ in j1is(excise invoice TO subcontractor) and in j1iex(excise duty FROM subcontractor)?

Sample invoice with excise duty only

Hello Experts,
User is sending free samples to customers. Presently, normal sales invoice is raised and credit note is issued in SAP. We need a separate Sample Invoice with zero value but with Excise
Duty Payment.
How to achieve this requirement? suggestions?
Regards,
Raj

Dear Raj
Check these threads for making sample sales
[Sample sales |Sample sales]
[Sample sales scenario configuretion |Re: Sample sales scenario configuretion]
thanks
G. Lakshmipathi

Subcontracting process with excise duty??

hi all
Can anybody explain me about the subcontracting scenario with excise duty??
For example , i have cerated subcontracting PO for A material is finished material is exciseable.
To produce A material , i have provided ,B,C,D materials to subcontractor , those materials also exciseable .
this is my scenario , explain me with transaction code (Step by Step).
Explain me about excise duty accounting folw for above scenario.??
Thanks
SAP-MM

Hi,
During J1IS: -
CENVAT Payable BED - Cr
CENVAT Payable ECS - Cr
CENVAT Payable SECess - Cr
Excise Duty Paid - Dr
During J1IEX: -
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input SECess - Dr
CENVAT Clearing - Cr

Stock transfer with excise duty

Similar Messages

Maybe you are looking for