Stock Transfer of Excisable goods from Depot to Depot

Hi,
We are facing an issue with Stock Transfer of Excisable Goods from an excisable depot to another excisable depot which had arrived from an excisable manufacturing plant.
We are following the below steps:
1. Create STO PO at Depot A (ME21N)
2. Delivery of Goods from Depot B (VL10B)
3. Create Depot Excise Invoice at Depot B with reference to Orginal Manufacturing Excise Invoice (J1IJ)
4. Goods Receipt at Depot A (MIGO)
5. Capture Excise at Depot A (J1IG)
We are getting stuck at Step 5. When we are performing J1IG and entering Depot Excise Invoice or Original Manufacturing Excise Invoice, we are getting an error message as "Excise invoice does not exist in Supplying Plant".
Kindly suggest how to capture excise at Depot A.
Regards,
Debarshi

Dear G. Lakshmipathi,
We have tried your solution but we are still stuck at the same place.
In J1IG, if we enter the Depot B excise invoice and press enter, we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Original Manufacturing excise invoice and press enter, then also we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Depot B excise invoice and give a tick in the "Depot Excise Invoice" and press enter, we are getting into an infinite loop.
Kindly suggest how we can capture the excise at Depot A.
Regards,
Debarshi

Similar Messages

  • Excisable Stock Transfer with Excise Duty to Other State Warehouse

    Dear Experts,
    We have a factory in India which has to pay excise.
    We have depots in several location in India.
    We transfer finished goods from Factory to Depot and have to pay excise.
    When selling from Depot we do not charge the end customer the excise. (Only VAt and this is Depot is a Seperate company in Tally )
    However, I will be paying the excise at Factory
    The costing of the FG transferred to Depot has to be increased as I'm bearing the cost of excise and not passing it to the final customer.
    We are implementing SAP B1 9.0 Please Suggest how to manage this in SAP 9
    In tally we were managing these by creating Different Company but in SAP we need to manage in Same company
    Is there any other workaround, by using inventory transfer form ? then how will be the excise postings
    Please Suggest
    Regards,
    Chetan Popat

    Hi Chetan,
    On SAP you can do stock transfer with payment of duty selection on stock transfer form. and then you can create corresponding excise invoice. Make sure you are transferring stock from one excise warehouse to another.
    Regards,
    Chintan

  • Stock transfer between Excise Plant and Non Excise Plant

    Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
    Requirement : Stock transfer between Excise Plant and Non Excise Plant
    Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
    ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
    Pls let me know the possiblity of above two in SAP and Legally?
    thanks in advance
    Sridevi

    Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
    Trading Goods say A gets imported to India. Issue was :
    1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
    2) Stock price varies every day being batch wise produced in say Singapore.
    Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
    Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
    Am I clear? If not, pls let me know,
    regards
    Sridevi

  • Stock transfer order excise

    Dear Experts,
    Can i know wt are the special things comes in stock transfer order excise  compare to domestic excise process?
    i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
    Regards
    ishikesh

    Do the following steps for STO Customizing:-
    1. Create a customer master record for the issuing plant.
    2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
    3. Repeat steps 1 and 2 for the receiving plant.
    4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
    The Process Flow would be as follows :-
    Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
    Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
    Once the goods arrive, you follow the standard procedure for incoming excise invoices:
    The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
    The excise supervisor then posts the excise invoice.
    Best Regards,
    Ankur

  • Stock transfer with excise duty

    Hi Experts,
    i have to do stock transfer from one plant to other plant when excise duty is invloved. and both plants comes under one company code.and receiving plant not paying any thing to supplying plant.please suggest me which process shall i follow.
    Thanks and regards,
    Balakrishna R.V

    Hi,
    The receiving plant should also registered for ED. Then when u do STO, after issue th goods, do J!is & j1iv. Later with the help of that document Capture Excise in other plant. So there in supplying  plant the  ED is deducted & in receiving plant the ED is taken as per law.
    Regards
    Pandari

  • Stock Transfer of Capital goods(capex,assets)

    Dear SAP Gurus,
    How to do the stock transfer of the Capex material, as during the procurement of the capital goods, it got procured by using the short descriptioin without material master and with the PO account assignment category "ASSET" , and while doing the GRN , no stock lies in the storage location ,
    Now the Requierement is to stock transfer the Asset from one plant to the another plant. using hte stock transfer order,
    How to do this.
    As per as finance point of view is concerned , they will do the Asset to Asset Transfer , but from teh logistics point of view, how to achieve it.
    Thanks & Regards
    Nitin Chhabra

    Dear ,
            Please follow this link to get detail informatiom about Capital material handling.
    http://help.sap.com/saphelp_47x200/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Check Capital Goods under material management
    Hope it helps
    Abhijit

  • Stock Transfer for Excisable Materials Using Movement Type 301

    Hi,
    We are having a Plant 1002 as excisable Materials.
    During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
    Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
    Or we need to follow some other router for Stock Transfer for the Excisable Materials?
    I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
    Regards,

    Hi PK,
    Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
    I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
    If you need tax posting on accounting document, then you will not be able to use 301 movement type.
    We use MM/SD Plant to Plant transfer (movement type 861 / 862)
    Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
    If they are ok with no tax postings on accounting document, then 301 movement type should be used.
    Try to make a test, show then how it works, then you could get ok from then
    I hope it helps you.
    Best Regards,
    Natan

  • Stock Transfer Between Excise and Non Excisable plants

    Hi Friends,
                                 I have created STO for excisable plant from non excisable plant. delivery created in excisable plant. But in non excisable plant, I am unable to capture excise invoice.I want the price in non excisable plant as Price+ excise. How to do this? please reply...
    Regards

    Non exciseable plant will create a STO and give it to Exciseanle plant.
    The Exciseable plant will transfer post the stock
    Along with Excise , J1IS created.
    The receipt plant,The Non Excise plant will do the GR . the stock + excise will get added up in the non exciseable plant .
    Rewgads

  • Transfer posting of goods from sales order to sales order

    Hi Sap experts
    Can anyone please tell me what is the movement type for trasfering goods from one sales order to another sales order and tell me what r the steps i should follow for this .

    Hi,
    What do you mean by transfer posting from sales order to sales order? The movement type will come into picture when a material document is involved that means goods are issued/received.
    Elaborate more on your query.
    Hrishi

  • Stock transfer with incorrect price from MRP

    Hi.
    I have material with special procurement 40 (MRP2 view).
    Special procurement is for stock transfer from other plant.
    When I run MRP with MD03 transaction, PR for transfer is created, but  value price (EBAN-PREIS) is incorrect since that Value price is obteined from target plant,  instead  should be obteined from supplying (issing) plant.
    Therefore when I create PR manually with ME51N transaction, value price is obteined from supplying plant.
    I have ECC 6.0 wtith Support Package SAPKH60407 installed.
    Does anyone can help me?
    BR
    JB

    Hi.
    I have material with special procurement 40 (MRP2 view).
    Special procurement is for stock transfer from other plant.
    When I run MRP with MD03 transaction, PR for transfer is created, but  value price (EBAN-PREIS) is incorrect since that Value price is obteined from target plant,  instead  should be obteined from supplying (issing) plant.
    Therefore when I create PR manually with ME51N transaction, value price is obteined from supplying plant.
    I have ECC 6.0 wtith Support Package SAPKH60407 installed.
    Does anyone can help me?
    BR
    JB

  • Stock Transfer Order & Post Goods Issue

    Hi Friends,
    Can any one explain me what is Stock Ttransfer Order why we need it? and
    What is Post Goods Issue and why we need it?
    Can any body explain me  in eloberate.
    Regards,
    DVNS.

    Hello,
    Stock Transport Order (STO) is a Purchase Order of type 'UB' created for trasnferring stock between two plants (which can belong to same or different company codes). In STO pricing schema, you can set up different conditions such as freight, surcharge etc. to charge the receiving site.
    A delivery document is created for the sending site which needs to be posted through Post Goods issue step in order to deduct stock from the site. Then the stock will be in transit until it is received by the Receiving site. The receiving is normally carried out with reference to the delivery document.
    Thanks,
    Venu

  • Stock transfer to physical bins from 998 storage type

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks
    Edited by: RKsap193 on Oct 14, 2008 10:35 AM

    Hi,
    I would suggest you to chek this link:
    Re: Bin Number for the First Time Putaway
    if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
    (Jurgen)
    Regards,
    Csaba

  • Excisable Finished Goods Stock Transfer (India specific)

    Hi Gurus,
    Is it possible to handle the stock transfer of Finished Goods from one excisable (manufacturing) plant to another excisable (manufacturing) plant in SAP CIN?
    If yes, can you please advise the steps?
    Looking forward to your expert advise.
    Regards,
    Amit

    hi
    prasanna
    you reply is stranded process of plant to plant trance fer  . in this process  you can create proforma invoice , here their  is no accounting  generated,
    in My process company they do the sto ,it totally deference , first creating sale order , delivery, invoice (f2), j1iin.
    here you create the accounting postings , so fi document entry s it will possible, so accounting will satisfy ,
    this for can  do the branch trance fer and plant to plant stock trance fer ,
    in branch trance fer for depot process, here its for trading
    va01-vl01n-vf01(f2)-j1iin,  after migo( movement type, y56), j1ig capture
    depot sales
    va01-vl01n-j1ij-vf01
    plant to plant
    va01-vl01n-vf01(f2)-j1iin after migo
    here you can not capture the excise invoice after migo , because it is plant to plant , you maintain the different excise registration, excise group and serious groups , you maintain
    this is for my company process , my can not use the sto stranded process

  • Stock transfer from WH to WH

    hello Experts,
    here is the scenario.
    we have one plant with two WH located at different geographical locations.  we are planning transfer of stocks using consumption based planning taking SLoc as MRP area.
    When stock comes done at WH , automatically it should trigger requirements .  Now transfer of finished goods from one WH( Sloc ) to another Wh ( sloc) is of long distance. we need to capture transport cost. These transport cost is beared by Third party forward carrier.  Now when we transfer the material from one sloc to sloc as of sap logic, no accounting docs get generated . how to capture delivery cost and how to invoice to vendor .
    In ecc 6.0 version, we have option as activate issue sloc for sloc to sloc transfer. this config i have done. when i am creating STO process , conditions for capturing delivery costs are not triggering.
    can u pls help me in this scenario.
    Thanks experts
    vamsi krishna

    thanks

  • Stock transfer of Imported Material

    Dear Experts ,
    I wanted to do stock transfer of import material from one plant to another under the same company code.
    I want to transfer the cenvat credit on taken on CVD & other cess to the receiving plant .
    How should I go about it.
    Kindly guide .
    Thanks

    Hi,
    1) create PO for stock transfer.
    2) maintain material of stock transfer in j1id , with accessible value.
    3) create goods issue 351 mov type.
    4) go to J1is , refernce documnet will be goods issue number , type matd and customer id receiving plant
        after entering in to it put percentage for BED , SED , cess and also give accessible value.
    5) save j1is
    6) post excise invoice (j1iv with refernce of J1is doc), this number will automatically comes in goods issue document under excise invoice tab.
    7) take print of excise, will go with goods issue
    8)then in receiving plant do GRN , excise invoice will be post excise in goods issue plantdo, enter duties for creadit.
    do same process as of excise creadit.

Maybe you are looking for