Excisable Stock Transfer with Excise Duty to Other State Warehouse

Dear Experts,
We have a factory in India which has to pay excise.
We have depots in several location in India.
We transfer finished goods from Factory to Depot and have to pay excise.
When selling from Depot we do not charge the end customer the excise. (Only VAt and this is Depot is a Seperate company in Tally )
However, I will be paying the excise at Factory
The costing of the FG transferred to Depot has to be increased as I'm bearing the cost of excise and not passing it to the final customer.
We are implementing SAP B1 9.0 Please Suggest how to manage this in SAP 9
In tally we were managing these by creating Different Company but in SAP we need to manage in Same company
Is there any other workaround, by using inventory transfer form ? then how will be the excise postings
Please Suggest
Regards,
Chetan Popat

Hi Chetan,
On SAP you can do stock transfer with payment of duty selection on stock transfer form. and then you can create corresponding excise invoice. Make sure you are transferring stock from one excise warehouse to another.
Regards,
Chintan

Similar Messages

Stock transfer with excise duty

Hi Experts,
i have to do stock transfer from one plant to other plant when excise duty is invloved. and both plants comes under one company code.and receiving plant not paying any thing to supplying plant.please suggest me which process shall i follow.
Thanks and regards,
Balakrishna R.V

Hi,
The receiving plant should also registered for ED. Then when u do STO, after issue th goods, do J!is & j1iv. Later with the help of that document Capture Excise in other plant. So there in supplying plant the ED is deducted & in receiving plant the ED is taken as per law.
Regards
Pandari

Stock Transfer of Excisable goods from Depot to Depot

Hi,
We are facing an issue with Stock Transfer of Excisable Goods from an excisable depot to another excisable depot which had arrived from an excisable manufacturing plant.
We are following the below steps:
1. Create STO PO at Depot A (ME21N)
2. Delivery of Goods from Depot B (VL10B)
3. Create Depot Excise Invoice at Depot B with reference to Orginal Manufacturing Excise Invoice (J1IJ)
4. Goods Receipt at Depot A (MIGO)
5. Capture Excise at Depot A (J1IG)
We are getting stuck at Step 5. When we are performing J1IG and entering Depot Excise Invoice or Original Manufacturing Excise Invoice, we are getting an error message as "Excise invoice does not exist in Supplying Plant".
Kindly suggest how to capture excise at Depot A.
Regards,
Debarshi

Dear G. Lakshmipathi,
We have tried your solution but we are still stuck at the same place.
In J1IG, if we enter the Depot B excise invoice and press enter, we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Original Manufacturing excise invoice and press enter, then also we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Depot B excise invoice and give a tick in the "Depot Excise Invoice" and press enter, we are getting into an infinite loop.
Kindly suggest how we can capture the excise at Depot A.
Regards,
Debarshi

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock Transfer Between Excise and Non Excisable plants

Hi Friends,
I have created STO for excisable plant from non excisable plant. delivery created in excisable plant. But in non excisable plant, I am unable to capture excise invoice.I want the price in non excisable plant as Price+ excise. How to do this? please reply...
Regards

Non exciseable plant will create a STO and give it to Exciseanle plant.
The Exciseable plant will transfer post the stock
Along with Excise , J1IS created.
The receipt plant,The Non Excise plant will do the GR . the stock + excise will get added up in the non exciseable plant .
Rewgads

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

Excise invoice posted with Zero duty value

Hi,
My client has an STO process where they will generate a proforma Invoice with Excise duties,
Initially when proforma was created excise duties were not reflecting since condition records were not maintained, user was not aware of that and created a excise invoice also with 0 Duty value.
After this condition records were maintained and invoice was updated with excise values. But we are unable to update the excise tables through the same excise invoice no. This transaction is a back dated one for which client has already filed excise returns with SAP Excise number series, Can we pass a JV through FI to adjust the entries or any other solution.
Regards,
Zehran.

Client has done PGI with ZERO quantity
also done billing
if i go to cancel that cancel invoice in J1IIN
it is not allowing to cancel
If your copy control is in line with standard settings, first of all you cannot post the goods issue without any quantity and also generation of billing is not possible.
Coming to your second issue, please try in J1IH instead of J1IIN.
thanks
G. Lakshmipathi

Please help to get onhand stock report with last purchase and billed date warehouse and item wise

please help to get onhand stock report with last purchase and billed date warehouse and item wise

Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy

Plant to plant stock trasnfer with excise duty

Hi,
We have one company code and two plant assign to it , now one plant is Ma=fg. plant and other plant is depot plant , now I have purchase material with excise duty in mfg. plant and excise is capture with J1IEX aprt1 and part2 is done   now our requirement is we wan to sal that material thorugh depot plant so for this the entry should be there in RG23D so can you giude or give some link for this so that material from plant A to be trasfer to depot plant , with excise then we can sale that material thorugh trading plant.
regards,
zafar

Hi,
        Steps to Stock transfer from one plant to another plant as below... ..
1. First enable Sales View of material that you want to transfer (MM01) and fill required data i,e.
Plant  Select Plant where Material transferred.
3)     Sales Org. Data1 Menu  Select Division u201851u2019 Cement.
4)     Sales Org. Data2 Menu  Select Gen Item Cat. Grp u2018 NORMu2019
5)     Sales General Plant Data 
A)     Availability check u2018KPu2019
B)     Loading GRP u20180001u2019
C)     Profit Center u2018Plant Codeu2019
2. Create Condition Records (VK11)
3.Create Sales Order                 (VA01)
4.Create Outbond Delivery     (VL01N)
5.Create Billing Document      (VF01)
6. Excise Invoice                          (J1IIN)
7. Printing of Excise Invoice and Commercial Invoice                           (VF02)
Regards

Stock transfer between plants- 1 plant with no excise & 1 plant with excise

Dear Sir,
We have 6 plants working under SAP version 6.0 and in all the plants excise is applicable i.e. modvat can be taken. Now a new plant say X is coming up under the same company code in which excise modvat won't be applicable. In this scenaripo when we will do stock transfer from existing plants excise will be applicable on the material sent to plant X but at the time of receiving the material at plant X this excise amount must be inventorised on material as modvat is not applicable in this plant. Similarly when we despatch the material from plant X to other existing plants material cost will be with excise value.
Pl. guide me that how this scenario to be configuered.
Thanks in advance.
Rajiv

Hi Rajiv
<b>Only you need to do is</b>
In plant X which is not registered with excise, there you have no need to maintain excise related data of material master record i mean in J1id. So this will post your exsice amount to your inventory cost.
Secondly if material is sent from Plant X to excisable plant this plant X can not levi excise duty as its not regeisetered one.
Regards
Vivek
-- Reward if helful !!

Stock transfer from excisable plant to nonexcisable

Dear All,
My scenario is i am selling (proforma invoice) material "Carton" from my XYZ plant(Excisable) to ABC plant(Non excisable)
Also i am not paying for this and it will be against proforma invoice.
Material value is 100 per unit with excise value 1021= 13 (which i have paid when procured the material)Total value = 113
After stock transfer i want excise accounts of xyz plant should reversed (as i cant take benefit of this excise value which is 13 rupees) I want material master value of 100 rupees of my "Carton" material should get credited from my XYZ plant and material master of my ABC plant should get debited with 113 value (13 rupees of excise should go in material master value as this plant is non excisable)
Please let me know how to configure the same / suggest the route to do the same
Thanks,
Naren

Dear,
But it is not getting loaded on material as you cant assign stock account again for another transaction key.(It is giving error that Already it is assigned for BSX)
Entries happening are
Stock account - Credited from excisable plant's business area - 100-
Stock account - Debited to non- excisable plant's business area - 100+
Other losses material (key is AUM) - 10+
Material overheads - 10-
Please tell me the whole process
Naren

Capture excise: Stock Transfer

Dear Experts !!!
In one of the stock transfer scenario, we are transferring one material from one plant, where the material is used as input material i.e. J!ID maintained in sending plant is "Raw Material'
Whereas at the receiving plant for the same material code the J1ID is rightly maintained as "RG1"
Now at receiving plant, after doing GR, while capturing the excise invoice system gives the error message as " Material has not been declared as input Material in ."
We tried to capture the invoice by changing the Material type in J1IEX manually as "Raw Material" . But ended with same error again.
we want to capture the Excise invoice in J1IEX without changing the J1ID.
Please help me out ???
Thanx in advance
Regards
Kailash

Have u done MIGO.
If not
Do the MIGO by changing the material type .
there should not be the error.
If u have done MIGO
reverse the document
Do the MIGO again.
change the material type
there should not be the error.
regards,
Sujit

Stock Transfer for Excisable Materials Using Movement Type 301

Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,

Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan

Excise Stock transfer

Scenario:
I have two company codes C1 (with plant1) & C2 (with plant2)
Both the plants are exciseable.
From the stores of plant1 I sent finished goods to the plant2(its a depot). From this plant2 the material is sold to customers.
In the process flow which documents I have to create & post, both in terms of excise & non-excise. Pl include excise regisetrs also.
Pl detail.
Regards
VS

Hi VS,
Go thru this link to understand various goods movements and their excise impact.
http://help.sap.com/saphelp_470/helpdata/en/1e/f4a1ac11d811d4b5af006094b9ec21/frameset.htm
Hope this helps.
thanks,
Viswanath

Intercompany stock transfer with no accounting document

Hi,
During the Inter-company stock transfer,client needs only stock movements from supplying company code to receiving company code,but they does not want any accounting document during this transaction.
I have assigned Proforma invoice to delivery document type.Is there any other provision.
Kindly advise.
Pradeep

Suppose if billing is made with TYPE IV,then we could get completed message.
What is the setting makes this happen.
The reason is in copy control of VTFL between IV and NLCC at item cat NLC you maintain the Pos/ neg quantity field will have + which updates the status of the delivery once the target qty gets billed hence system shows status as completed.
For the same above scenario if you put blank system shows as being processed.
And coming into your scenarios you are maintaining the copy control between Delivery and Proforma invoice i think you have the same pos/neg quantity having "blank" which means it does not have any effect . This is the one of the reason you can create any number of proforma invoices.
So if you want to update the status as completed please put + in the field pos/neg quantity.
This should definitely work for you, i have tested in my system.
thanks,
Srinu.

Excisable Stock Transfer with Excise Duty to Other State Warehouse

Similar Messages

Maybe you are looking for