Stock Upload at a pre-determined Price

Dear Sir,
We need to upload the Stock using movement 561 . By default Stock is getting uploaded at a price as per the Material Master (Accounting 1 view) . The Price Control is V .
We need to upload the stock at a differnt price (the price differnt than the current Moving Avg Price) . Kindly guide us about the procedure for the same pl .
Kindly help me pl .
Rgds
Sonia

Hi ,
U can use Amount in Local currency field at the MB1C Screen.
If u are not finding it there then Go and Check the field selection setting in SPRO -> MM -> Inv Mgm -> Define Field selection.
OR check it in SPRO -> MM -> Inv Mgm -> Movt Type -> check for 561 field of local currency is dispalyed for MB1C transaction.
regards,
SNB

Similar Messages

  • Intial stock uploading not taking place. after initial price uploading

    Dear Pandits,
    I am process of uploading initital stock uploading.
    1.   Initital prices have been maintained thro MR21 as on 31.3.2009.( 12/2008)
    2.   MM period has been opened for April 2009 ( 1/2009)
    3.   When uploading the stock system giving error msg. "Price for Material 0000000004 in Plant 1000
          for  Not found"
    Please advise what could have gone wrong.
    thanks
    v balajee

    Consumable materials are not having accounting view in normal practice, but if you are uploading through LSMw, tick of accounting view remove it, and if you are using the accounting view then add the value field in your LSMW and add the value columun and then upload because its moving average price its not the standard price.
    regards,
    qsm sap

  • Profit center document not created for initial stock upload

    Hi Gurus
    We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

    Hello,
    Check your 3KEH Settings
    Check your OKB9 account determination
    Make sure you have profit center number ranges in GB02
    Regards,
    Ravi

  • Finished  Good Stock Upload

    Dear All,
                 I gave two Ques regarding master data upload at the time of initial stock upload.
    1) How to upload the Finished Goods Stock,and how to handle the value of stock.b'coz the price indicator is S.if we will upload it goes Cost Difference accout.
    2 ) In the Stock of raw material should we upload the moving average of material in material master.

    u can use LSMW for the same
    mantain all the 13 steps over there using transaction LSMW
    or you can do it by MB1C movemnt type 561 in the later screen give the material and qty when you will press enter it will take you to the new screen where there is a feild known Amout in local currency give your standard price there it will sore the same price in the material master.
    2. For the raw materials it should be moving average price.
    Prerequisite the material should be created with the price indicator S for FERT and V for ROH
    Enjoy SAP
    Regards
    Sujoy
    Edited by: SUJOY KUMAR PAL on Apr 24, 2008 4:44 PM

  • Intial stock upload

    Hi guys,
    Can anybody have any solution if we upload wrong qty and price of materials during Initial stock uplading.Please show the way for correcting it.We are about to Go-live shortly
    SAP ECC-6.version.
    Hurray,

    Hi
    Any errors in stock upload to be corrected only by cancelling the material documents with the same posting date.
    Ensure that all the initial stocks are loaded with value in amount in local currency. The inventory stock upload to be done only after final approval from finance on material valuation.
    Thanks & Regards
    Kishore

  • Stock upload conversion program

    Hello Experts,
    I have few questions below.
    What is the case that we require to do a BDC program for stock upload? What is the difference of using LSMW Vs BDC?
    I have about 500 materials and need to upload the stock into SAP from external excel file and need to move them into physical bins.
    Do I need to develop a conversion program for LSMW to full fill my requirement.I am asked to write a functional spec for stock upload.Please help..
    Do i need a seperate conversion program for stock transfer from 998 storage to physical bin?I should also print the SU labels during this program.
    Please explain the process.
    Thanks for your time in advance.
    Edited by: RKsap193 on Oct 13, 2008 12:28 PM

    If you send your personal email than i can send you the document with screen shot.
    Here is the complete step bu step process to load initial stock with LSMW
    you can use LSMW or BDC program
    LSMW can eb designed by analyst and BDC can be desined by ABAPer
    I did not find any documentation describing scenario of initial stock entry of material to HU & WM managed storage location. It inspired me to write this wiki.
    I use the following scenario of loading initial stock entry:
    u2022     Creation of inbound delivery using standard batch input import method - program RM07MMBL  with following tip:
    o   Input file from legacy system is prepared it such a way that one line contains information about one palette (or other packing materials) and storage bin coordinate.
    o   In the standard field MTSNR (Material slip) storage bin coordinates information is recorded.
    o   Field MTSNR is transferred to field LIKP-LIFEX (External Delivery ID)
    u2022     Creation of transfer order in reference to inbound delivery using batch input recording of transaction LT03
    o   Field NLPLA (Destination Bin) is read using simple ABAP code from delivery header - LIKP-LIFEX
    To create transfer order for inbound delivery in transaction LT03, material in inbound delivery must be packed, i.e. handling unit must be created. It can be archived by using an automatic packing functionality (packing instruction and packing instruction determination). 
    After TO confirmation the goods receipts can be posted for deliveries.
    Standard output can be generated for handling unit using message type E128 (EAN128 sticker). If needed storage bin information can be printed to simplify label  sticking on palette or other packing materials in the warehouse complex.
    In this scenario homogeneous materials are packed into one handling unit.
    Step 1: LSMW for initial stock entry in MM using 561 movement type:
    This is the well known standard LSMW procedure which use standard batch input import method - program RM07MMBL .
    1a. LSMW Process steps:
    I apply only following tip: in the standard field MTSNR (Material slip) storage bin coordinates information is recorded.
    1b. Maintain Source Fields LSMW process (step No. 3):
    1c. Input file - example:
    1d. Create batch input session LSMW (step No. 14).
    It is important to set "1" for Max. number of items. It ensures that one delivery is created per one input line.
    1e. Log sample from batch input session.
    1f. Inbound delivery monitor - transaction VL06I
    Selecting deliveries for Putaway you can control deliveries created in preceding step
    Each delivery is packed:
    and output - message type E128 is created:
    Step 2: LSMW for transfer order creation in reference to inbound delivery:
    This LSMW procedure is based on batch input recording of LT03 transaction. 
    2a. LSMW Process steps
    2b. Maintain Source Fields LSMW (step No. 3).
    Deliveries numbers can be simply generated to input file form inbound delivery monitor (see 1f step)
    There is no need to fill LGTYP (Storage type) and LGPLA (Storage section) because these fields are derived in LT03 transaction from storage bin - LGPLA (only if LGPLA is unique for all storage types and storage section - LAGP table).
    2d. Display Read Data LSMW (step No. 10)
    2e. Run Batch Input Session (step No. 14)
    Log from the batch input session:
    LT23:
    I have customized the system to automatically confirm TO. Finally all HU are put away.
    Tip & Trick
    You can confirm TO using RF devices (standard transaction LM02) while label sticking on a palette.
    Last step is to post GR for inbound deliveries which were put away. It can be done collectively in inbound delivery monitor by selecting deliveries for goods receipt: 
    Summary
    u2022     Easy to implement: two simple LSMW scenarios (one with few ABAP lines)
    u2022     Standard message type for label printout with information about storage bin coordination
    u2022     Possibility to analyze correctness of data migration in inbound delivery monitor before posting GR
    u2022     Possibility to confirm label sticking with RF transaction
    u2022     This scenario can be adapted for non homogeneous HUs

  • How to confiuge RMAN offline and online back-up at a pre-determined time.

    Hallo!I am an Oracle newbie currently studying the Oracle 10g Database Administration Certification.Still very new to Enterprise Manager.
    My query is that can you configure an offline database back-up such that you can set up an offline backup at a pre-determined time?
    I am assumng a real-office scenario where a DBA would like to have an offline back-up at night e.g. at 1 am when they are no users in the office.If the DBA can set the system such that everday at 1 am ,the instance shuts down,back-up is done e.g a backup set that can be stored on tape,then after backup the instance re-starts itself.All this should be automated such that by the time staff report in the morning ,the instance is up and running and users can work seamlessely
    How can I automate this entire process using RMAN and/or Enterprise Manager or a sript to achieve this?Also,I would like to know if you can automate the same for online back-up such that it can backup while instance is still running and users are accessing the DB.
    Please help me on this and I shall be infinitely grateful.Thanks in advance.

    Hi,
    On UNIX server, you can use shell script and sql scripts that can do this job for you. Once the scripts are tested succesfully, you can put them in the crontab.
    Crontab entry should reflect the time, day, week, month details as you thought to schedule it.
    This link may help you. http://www.dbasupport.com/oracle/scripts/Backup_Recovery/RMAN_Backup/
    Regards,
    vasu

  • Reversal of stock upload file:- Urgent

    Gurus,
        By mistake at intial stock upload file is  upladed twice, how could i reverse  the same. I uploaded  through   T -code MB1C/ Mvt type 561; and showing at 998 storage type( interemediate bins). How could I will reverse the excess stock from the same.
    Please let me know the process . its is urgent. by what logic shoulsd I make  BDCetc.
    Regds,
    Sanjay rahangdale
    [email protected]

    Hi,
    re run the file again but this time with a 562 movement type, this should reverse the error exactly how you want it.
    Steve b

  • Stock upload - Goods receipt date, FIFO

    We are doing our initial stock upload using LSMW based on goods movements.
    When posting a goods movement the posting date will be used for FIFO considerations.
    That's fine when your system is operative, but during the initial stock upload the posting date will be the same for all movements, which is not what we want.
    Is there a way to transfer a GR date from the legacy system?
    (Opening the posting periods to any date in the past is not an option).
    Any ideas?
    Thanks
    Andreas

    If you had a GR on May 2nd of 1000 and another GR on Oct. 1st for 500  and your currect stock is 800, then you just know that the last GR date was Oct. 1st. But this is not the truth for all stock on hand. So FIFO cannot work. So the field has just information caracter.
    SAP will capture such info at batch level. Different software, different concepts. so each batch can have its own last GR date, and you distinguish the stock by batches, and can use batch search strategy to find the oldest one.
    Without batch managment, SAP has this information about last goods receipt at quant level in warehouse managment.  Do you use WM module?
    (even then I have no standard solution to manipulate this field while doing the stock load)

  • GR document and posting date issue for initial stock upload are overidden

    Hi all
    Loading initial stock into the system using standard idoc message type MBGMCR and basic type MBGMCR02.
    We are trying to post the intial stock upload with posting and document dates in past with this idoc. The Idoc is accepted with these dates but while posting the system is overiding these dates and posting the document with system date. Any clue as to what is happening?
    Regards,
    Amit

    Hi Jurgen
    I am aware about the posting being possible till the last period.
    But the system over-riding the posting and document dates in the IDoc even if I chose previos day's date in the current period. The dates in the IDoc are correct to be in the past. The IDoc is accepted by the system with the document and posting dates in the past.
    But dates in the document after posting are system dates. Very unsual. Please let me know the reasons.
    Thanks for the reply.
    Cheers,
    Amit

  • How to determine prices in Resource Related Billing(RRB)

    Dear Experts,
    I am working for service related client.in this SD,PS,HR and CO are integrated.
    from SD i have to create resource related billing.here while running DP91 how the system determines the resources related pricing.
    My doubts are:
    1.Whether prices are determined automatically or we will maintain manually?
    2.If prices are automatically:how and where we maintain?
    3.If prices are manually:how and when to maintain?
    I heard that to determine prices automatically by system i have to create Z table.
    Z table because,prices are differ from projects,and position of the employee.
    Thanks for helping,
    Ravikumar.R

    Yes, price determination is automatic
    If you have worked on DIP profile, there you might have come across term called Source.
    Based on the source system determines the pricing data.
    And SAP provide 9 different sources for different process like:
    1.
    Actual costs - Line items (most popular)
    2.
    Actual costs - Totals records
    3.
    Statistical indicators - Line items
    4.
    Statistical indicators - Totals record
    5.
    Funds - Line items
    6.
    Funds - Totals records
    7.
    Planned Statistical indicators - Totals records
    8.
    Planned costs - Totals records
    9.
    Easy Cost Planning (Generally used with PS Project)
    Details of source each can be learnt from SAP Help.
    Regards
    JP

  • How to use field 'HIER_ID' to determine price in S/O?

    I want to use field 'HIER_ID'(hierarchy) to determine price in S/O but I don't know what value I should maintain in pricing master data.
    It should be 'HIER_ID' = 01 or 02 or 10 or else?????
    I don't know.

    HI,
      U have to create a new condition table in the tcone V/03, there u can take the required field . then assign it to ur acess sequence.
    now maintain condition record for that.
    u wl get the price in s/o
    cheers

  • Stock of material and moving average price for each valuation type

    Hi
    Is anybody aware of any standard report which will show the stock of material and moving average price of the material for each valuation type.
    M5BL is one report but would like to check if there is any other report.
    Regards
    Vaibhav Mahajan

    Hi,
    Check MB52, select 'Display batch stock' option.
    Batch is nothing but your valuation type.
    You can see those details there.
    Regards,
    Piyush

  • Mass upload for info records when price gets changes

    Dear All,
    How to do Mass upload for info records when price gets change.
    Regards,
    Bhargav

    Hi Bhargav,
    Please upload the present price (Map) by  LSMW . When you are doing the transactions  then automatically by selecting option info update price will be updated the  info record in Order Price history
    Regards
    M B Raju

  • Why negative stock is possible for Moving avg price & not standard price?

    why negative stock is possible for Moving avg price & not standard price?

    Hi,
    Negative stock is available for both MAP as well as Std. price.
    Eg.
    MAP-->
    1. Mtl with MAP 1 Rs/pc & stock of 10qty.
    2. GI done for 15 pcs. Each pcs evaluated with 1Rs (MAP). Stock value reduce by 15Rs. Offsetting entry takes place in consumption account of 15Rs. The stock and stock value is -5 each.
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Negative stock (which issued) with 1Rs. But incoming mtl. is of 3Rs/pc. So difference of 2Rs for Qty 5 (Neg. stk) of 10Rs. will posted to Price Difference account. And remaining 20Rs posted to stock account.
    Std. price.--> step 1,2 remain same
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Durin GR Stock account posting will be 10Rs but due to negative stk value the net stock value will be 5 Rs. Remaining 20Rs posted to price difference acct.
    Regards,
    Sandeep

Maybe you are looking for