Stock Values for previous period on batch number

Need to show report which shows stock value and levels on a certain period (previous) by batch numbers.
Report MMBE shows current stock levels per batch.
Report MB5L shows stock value on a certain period (previous) but with no batch information
Is there any standard reports which you can see all stock values and levels for the previous period on batch?
Thanks

Hi,
Good morning and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

Stock Posting for Previous Period

Hi all,
In case, there is a need to update stock for previous period (Stock Transactions: Initial Quantities Stock Tracking and Stock Posting /Stock Posting List ) e.g. Update stock at 31/12/08 where there are stock movements within 2009, there is a System Message : Item quantities are not updated for initial entry of stock balances date, Update Now ?Yes , No, Cancel
How we activate this message, in case that does not appear?
Thanks in Advance

Check this WIKI
[How to update stock quantities according to a previous date?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494266]

Stock in Transit quantity by batch for previous period

Hi all,
Is there any way to get the information of stock quantity for stock in transit by batch for previous period?
In standard SAP system, when the stock is issued with reference to STO with movement type 641, the stock will be stored in the system as stock in transit. As the stock is sit at plant level, the standard SAP report does not show what batch was issued.
I have a requirement to display stock value of previous period down to batch level. Hence, SIT of what batch of previous period should also be displayed.
Any idea of how this can done, or any workaround solution?
Thanks.
Tom

MB5T lists the difference between delivery goods issued and goods receipt to your POs, as so called virtual stock in transfer
MB52 lists the stock in transfer that had been done with inventory managment movements and was updated to MARC table.
you have to find the movements (use MB51) that posted the stock that you can see in MB52.
see info in OSS Note 982345 - FAQ: stock overview MMBE

"lock" values of tax depreciation for previous periods

Hi all,
is it possible to lock calculated values of depreciation for previous periods? We need it for the case when e.g. depreciation key is changed. Then we want preserve the values for previous periods and change only the future values. But please note that we want this for depreciation area, which does not post values to GL.
thanks
Zbynek

Hi,
It did not work for me. I changed the useful life from 30 to 20 yrs and then used menu path Edit/Recalculate values. Then I used the Tx S_ALR_87012936 to display the depreciation values for individual months. But all the values were the same, i.e. the values for previous periods were not kept.
So is there a way to keep these values?
thanks,
Zbynek

I want better solution for adjusting the Material stock values for the last

my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599    QTY : 10181.03 Ltrs
Material 2 : RS: 1318596     QTY: 2152.76   Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c                      Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

How to find Blocked Stock Value for a Material Division

Hi Every Body,
I have gone through the notes 589024,637927 to find out Blocked Stock value for a Particular Material at different plants . But I have to get Blocked Stock value at each Material Division . Kindly give some light on it to get it.
The steps are same for finding the Consignment stock value and Transit Stock value. So kindly help me if any body has already worked on it.
With rgds,
Anil Kumar Sharma .P

Hi Anil,
well these notes work but they're prerequisites that have bothered me and unabled me to fulfill our requirement, for instance, having the material number in the drilldown and so on in order to perform the calculation during query execution.
I believe there is not much more alternative if you still want to calculate valuations accurately at SLOC or any other stock indicator during query execution...
I started from the basic fact that valuation of material underneath the plant/valuation area (in my case 1 PLANT = 1 VALAREA).; precisely because all movements doens't carry all information as per the note explanation.
So what we have done is to pull a cube with all Article/Sites MAP values; this can be done in several ways; MBEW/MBEWH are holding MAP values per fiscal periods; it has sufficient for us until now: our operations are asking to track MAP values more frequently.... So I am investigating how to work this out and have several alternatives:
- MSEG has additional fields (available in the extract structures) like Total Stock Qty/Value PRIOR the posting. There is as well an indicator telling if the posting is relevant for the valuation (if it is going to affect the Qty/MAP or not). So it is possible to get the MAP after the posting for each material movement.
- Create a change pointer on MBEW/MBEWH.
- MKPF has two convenient fields (CPUDATE and CPUTIM) from which we could build our own delta extractor tracking MAP changes
In BW the Idea is to have a cube registering the Article/Plant valuation in time (non-cumulative) and then fulfill our queries via a multicube...
hoping this will help you in solving your issue; I am of course following any topic in this matter so would appreciate your input....
Olivier.

Vendor evaluation report to be run for previous period

Hi,
Is the possible to run the Vendor evaluation report for back date.
i.e. if the period of evaluation is 30 days, can we run the report for previous periods
Regds,
Ritesh

Depending on the library you are using, can you verify whether you can use one of the following variables?
1PERIK
1PERW
5ACPERI
6-PERIK
8WPERIO
All these variables use fiscal periods and not calendar periods, that way you don't have to bother about number of weeks in a period, unless you really need to do the calculation based on number of days in a period.
If your library does not support these variables, then pl copy one of these variables (GS11) with appropriate details into a custom variable and use it in your report.
Let me know.
Regards
Subodh

SAP BPC NW 7.0 How to summarize values for past periods

Hi all,
I have a following problem. I need to make adjustments for previous periods. And to create a new adjustment I need to take into account adjustments that were made in the past periods.
I mean that I need to do smth like this u201CEVGET(Application,2009.NOV)u201D but instead of u201C2009.NOVu201D I need to use u201Cwhere time<2009.NOVu201D
The question is how can I calculate adjustments values that were made in the past? (I need values for the whole history for the same dimension values).
P.S.I had an idea to create the highest hierarchy node for time dimension and to use it in EVGET function instead of 2009.NOV but this idea was blocked by architect.

Hi Boris,
I would try the following:
- cell with "Start year" (eg: cell A1 with value "2005")
- cell with "End year" (eg: cell A2 with value "2009")
- Excel button linked to a macro or VB code that reads cells A1 and A2 and populates TIME MemberSet parameter with all the years in the reange (eg: "2009.DEC, 2008.DEC,2007.DEC,2006.DEC,2005.DEC" assuming YTD measure)
- EVSUM function in AfterRange to calculate the sum of every year in the range
Best regards.
Joao

Opening Balances for Previous Periods

Hi Experts,
There is a client requirement of entering opening balances for GL for previous periods before going live.
eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system.
Please enlighten on how to carry out this.
Regards,
Asap

Hi Asap,
You could only have one OB for one account. If those OB for different years are for different accounts, it is ok. Otherwise, you have 2006 OB only. You may create JE to get something like OB for 2007 and 2008.
Thanks,
Gordon

Manual postings to PCA for previous periods seems to get posted twice

Dear All,
Actual postings to PCA are performed manually using a custom job from SA38. Postings were made in FI for all previous (closed) periods . After running those jobs for previous periods to transfer those entries, some companies and accounts are showing duplicate amounts or just a balance on comparison ledger and not in base ledger. How to correct this.
Thanks a lot for your help

Hi
You will have to use 9KE0 or a custom job again to rectify this
Ajay M

Planned depreciation value for each period

Hi,
Where can I get the planned depreciation value for each period? I need the fields for customised report.
Thank you

Hi,
You can get the dep planned values for the each period by using SAP standard report S_ALR_87012936.
In the selection screen of that report, click on All selections button on application tool bar. Then you will be able to see the all the available fields for selection.
Choose evaluation period as Month.
Now execute it. After getting output, you need to go for change layout and adopt fileds like Dep 01-2010, Dep 02-2010, Dep 03-2010....Etc till Dep 12-2010.
This will fix your requirement.
Thanks,
Srinu

Can we run KSU5 - Assessment Cycle execute for previous periods

Dear Gurus,
Can we run KSU5 for previous periods. Means I have not ran from April 2008 onwards. Can I run right for all periods. Any inconsistencies arises for running the KSU5.
Please guide us.
Regards
Srinivas

Hi Srinivas,
You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
Pls revert back for further assistance...
Srikanth Munnaluri

Costing for previous periods.

Hi Experts,
Is there any way to do the costing run for previous periods.
I would like to do std. cost estimation for 5th period, but now we are in 6th period.
System giving message as cost estimation can't be saved for past period.
CK075: Planning date is in the past -> cost estimate cannot be saved
SKS

Dear Seshagiri,
It's the standard SAP'e bahaviour and there is no meaning in costing for a past date.
Also in my understanding
1.If your Costing Run date is some future date ,but the Costing Date from,Qty Structure Date,Valuation
date is on system's date,then the system will allow to release the cost and the same can be checked
under Planned Price,Standard price under Current Column in Costing 2 view.
2.If your costing run date is current date & the valuation,Qty structure date is some future date,then the
system will not allow you to release the cost.
check and revert back.
Regards
Mangalraj.S

Multiple values for Commodity Code/Import code number for Foreign Trade

Hi Experts,
Is it possible to enter the multiple values for Commodity Code/Import code number for Foreign Trade field for plant/country specific data in transaction MM02 using any BADI/User Exit ? If yes, suggest the name of the BADI/User Exit
Thanks,
Narayan

how can one material in one plant have 2 commodity codes? This is not logical.

Transfer material stocks to PCA for previous periods (1KEH)

I have an issue with 1KEH. We did not run the 1KEH(generate opening bal for material stocks) for period 2 . In SAP it looks like you can either run in for current period or previous period. (not 2 periods back).
I looked this up with SAP note 858363. I looked up forum replies for the same issue before. The basic solution mentioned was to use transaction 1KEL. To quote "To be able to successfully execute Transaction 1KEH again, you have to use transaction 1KEL and set the origin object type to 19."
Now from the same note there is a t code called 1KEC which can be used to do subsequent postings to PCA. I tried a test run. It seems to pick up what I want and do it correctly.
Can someone advice me if using 1KEC is feasible. If i have to use 1KEL it has to be done one item at a time and we have too many records. Also I am not too sure on how to do 1KEL.
Thanks..

Hi
You will have to use 9KE0 or a custom job again to rectify this
Ajay M

Stock Values for previous period on batch number

Similar Messages

Maybe you are looking for