Stop IM posting from interim storage bin

Hi,
We have a WM activated where the Transfer order is created and posted automatically when any material movement is posted.
Now when the stock in WM is already allocated to delivery still its possible to post the IM.
For e.g.
1 peice of  material 'ABC'  is available in IM and also in warehouse. A outbound delivery is created which has trigered a transfer order. Now the stock is lying in 916 interim storage type.
other user does a transfer posting movement (311 movement) of same material. Since the material is not available in the normal storage type, the transfer order is not created automatically.
Now the stock lies in 921 interim storage type.
I want to avoid such scenario. Is it possible to stop any posting in IM if the stock is not available in the normal storage type?
Regards

Hi Frenchy,
Thanks for your valuable input. This was something new for me.
I checked the settings in OMM8, the 'No stringent FIFO setting' is there for all the Interim storage type.
I think this will not help because when the IM posting is done, since there is no stock in normal storage type, system is not creating a transfer order (as per customization which is to created TO automatically). It only creates a open transfer requirement without finding a source storage bin.
However we have found another way to stop the posting. we have set a availability check rule to the transaction and movement type in IM which check the available stock during the posting and sets a waring/error message.
However this is at IM level.
Is it possible to stop the posting at IM via some setting in WM?
Regards

Similar Messages

  • Effect of issuing Material directly from Interim Storage BIN?

    Dear Experts,
    What is effect of issuing(311) material directly from Interim storage BIN without storing to Storage BIN.
    Because i am unable to do LB11& LB12  for  both GR's(101) and TP(311) as it has directly picked from Interim Storage BIn to do
    TP(311).
    So please someone explain me the effect of the above Scenario?
    Thanks & Regards,
    Olet Malla

    You can do it but in general you should not allow picking from interim Storage Types.  For example you don't want Sales trying to pick materials sat in the PSAs, you don't want Production trying to pick from materials in 916 etc. etc.

  • Available stock shortfall of & in interim storage bin

    Hi gurus,
    I am doing the movement type 261 in MIGO with reference to a reservation.
    I am working with Warehouse Management and I want to know why the system is defined in automatic the storage type 100?
    When I am doing the movement 261, I know that I have stock in the storage type 007 and I am putting this, but, the system is showing the following error message:
    100000000026; Available stock shortfall of         10.000 M2 in interim storage bin
    Message no. L9040
    Diagnosis
    In Customizing, the setting is such that no negative stock is allowed in storage type 100.  However, this posting will cause negative stock to exist in storage bin HE01 of storage type 100.
    For my storage type 100 I do not have defined any strategy in the customising.
    Could you help me with this, please?
    Kind regards.
    SP

    Searching on the forum you can find threads about WM/PP interface settings.
    (Re: WM Staging - Supply area to Production prder)
    Whether WM/PP interface is active it depends on your config and master data as well.
    You should check:
    - config: SPRO > LE > WM > Interfaces > Define Production
    - master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
    In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
    In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
    100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

  • INterim storage bin to unrestricted stock movemnet

    Dear All,
    I have a problem in warehouse management
    Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
    Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
    step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
    Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
    So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
    How can i move this out of the interim storage bin
    I am pretty new to WM kindly advice me how to go about this ,
    Regards,
    D vasanth

    A PCN must have got created.   Go to LU04,  mtype 321, enter your material.   It will display the PCN if any exists.
    Select the PCN and create Transfer Order and confirm the TO

  • Available stock shortfall of & in Interim storage bin message in BAPI_GOODSMVT_CREATE

    Hello Abapers,
    I have created a Zprogram and used a standard function module BAPI_GOODSMVT_CREATE.
    while processing this FM, Iam getting error messages in return table as "Available stock shortfall of & in Interim storage bin".
    Please help or suggest.
    Regards
    Pradeep

    Searching on the forum you can find threads about WM/PP interface settings.
    (Re: WM Staging - Supply area to Production prder)
    Whether WM/PP interface is active it depends on your config and master data as well.
    You should check:
    - config: SPRO > LE > WM > Interfaces > Define Production
    - master data: routing (proper work center is assigned), work center (proper production supply area), material master(FG) (production scheduling profile), control cycle (components)
    In standard system storage type 100 is defined as an interim storage type (you can compare it to storage type 902, 914, 916, etc). In control cycles (WM master data; LPK1/LPK2/LPK3) you define for each components which is the production storage type.
    In standard system storage type 914 is not used with material staging. 914 s.t. related scenario: GI (261) --> stock removel from normal storage type to interim storage type (914).
    100 s.t. related scenario: stock removal from normal s.t. to interim s.t. 100 --> GI (261).

  • Available stock in interim storage bin

    Dear all
    I Create GR Returns 161 with MIGO, I have message error
    "50012541 ; available stock in interim storage bin around  1,000.000 KG below target
    Message no. L9040
    Diagnosis
    In Customizing, the setting is such that no negative stock is allowed in storage type 916.  However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
    Can anyone help me ?
    thanks
    imron

    Dear
    I created cutomazing in Spro>Logistic Execution>Warehouse management>Activities>Transfer>Define Movement types :
    - Movement Type  = 161  (Returns PO)
    - Dest                  = 916
    - Shipment Type   =  A (Stck removal)
    - Requirement type =    B Purchase Order
    - manual TO creation not allowed
    - manual TR creation not allowed
    And then I created TO with LT01 using move type 161 and requirement type = B
    Now stock in Storage Type 916 was there with qty 1000
    But When try again to Create GR (MIGO-161- PO return)
    the error still  "50012541 ; available stock in interim storage bin around 1,000.000 KG below target
    Message no. L9040
    Diagnosis
    In Customizing, the setting is such that no negative stock is allowed in storage type 916. However, this posting will cause negative stock to exist in storage bin 0000000000 of storage type 916. "
    Can u help me, please
    thanks

  • Generate Interim Storage Bins

    Hi,
    a SAP standard system in SPRO, Logistics Execution, Warehouse Management, Interfaces, Generate Interim Storage Bins contains any storage bin ?
    Best regards

    Hi,
    Goods transfers in the WM system are processed by means of movement types. In the definition of the
    movement types, it is possible to have interim storage bins addressed. you can have these bins generated automatically
    Example:
      According to the definition of the WM movement type 501 (GR without Purchase order), the material is posted to the material storage bin automatically.
    If you do not want to use this option, you have to create the storage bins maually using
    WM-Master Data-Storage Bin-Create-Manually
    Activities: Generate the interim storage bins for your warehouse numbers
    Thanks,
    DV

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • Interim storage bins creation, List of standard interim storage bins

    Hi,
    We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
    Thank you

    Hi,
    You can use the transaction LX20 to create interim bins.
    Following interim bins will be available in the standard.
    001     901    WE-ZONE
    001     902    WE-ZONE
    001     910    WA-ZONE
    001     917    QUALITAET
    001     920    UML-ZONE
    001     921    UML-ZONE
    001     922    U-ZONE
    001     980    DUMMY
    001     998    AUFNAHME
    001     999    DIEBSTAHL
    001     999    SCHROTT
    Thanks & Regards,

  • Picking multiple quants from one storage bin

    Hello all,
    I have a client that purchases copper wire in pallets that are stored initially in storage bins.  During goods issues to production the pallets are split up and, when material is put back in the warehouse,  storage bins end up with multiple quants that are partial pallets.  When they issue goods, the system, using FIFO, picks quants from multiple bins even though one bin has sufficient quantity.  That forces the warehouse staff to pick from multiple bins rather than one. 
    Is there a way to make the system pick all of the material from a single bin even if there are multiple quants?
    Thanks,
    Ross

    Strategy A: Partial Quantities First  
    With this picking strategy the FIFO principle is overridden in order to optimize the management of stock in the warehouse
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f844b74afa11d182b90000e829fbfe/frameset.htm

  • Wm issue creating new interim storage bins

    Hi
    How to create new interim storage area and assign to movement types
    G N Kumar

    PLease confirm whether it is interim Storage Type or storge bin, i think it would be interm storage type (ext area for GR/ shipping area for GI - normally storage types with 9 series). If this is the case, you can do in the same way storage types are created and assigned to movement types.
    Please follow the below link for more info
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    regards
    arun

  • Stock transfer from storage bin to another storage bin.

    Hi,
    i would like to know the method to be followed in order to transfer the materials from one storage bin to another within the warehouse and also within a storage type.
    Also i would like to know how to transfer the material from one storage type to another.

    As everyone has mentioned above, to manually create TOs to transfer stock, use LT01 w/ movement type 999. However, this method is limited to a single material at a time.
    Depending on your scenario, you may want to set up storage type replenishment - where you regularly restock a smaller warehouse location from a larger one:
    Example: Small warehouse section with customer counter service & larger warehouse where bulk items and bulk quantities are stored
    Not sure if this is your scenario or not, but here goes:
    Requirement is to use the "Large, small" picking strategy for the receiving storage type.
    Material master records in that storage type need minimum and control quantities maintained on the WH2 tab
    Run (or schedule) program RLLNACH1 to automatically create transfer requirements to transfer stock from bulk storage to the smaller storage type - and then, depending on your config, either stop as TR or automatically post os TOs.
    Good luck

  • Storage Bin for Interim Storage Type 902 for GR

    Hi,
    We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
    I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
    Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
    Thanks,
    Shekhar

    Dear Shekhar,
    Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
    Best regards,
    Christiane
    Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

  • Serial Numbers in A Storage Bin

    Dear all,
    In warehouse management we have serial numbers attached to each item in the warehouse and these items are batch managed. During goods receipt serial numbers are scanned using RF scanner and a transfer order is created for each item. We have a customer table to store the details like storage location and storage bin etc when they are first scanned in. There is no problem here.
    If items are transferred from one storage bin to another using a transfer order, system is picking the serial numbers required for the transfer order posting. When corresposing material document is displayed using MB51, there is a tab for serial numbers that are included in this material document.
    Is there any way to get all the serial numbers of the items stored at Storage Bin level?
    Thanks and regards
    Raj

    Hi Christian,
    Thanks for the reply.
    In the mean time I was talking some more people here regarding this problem. Looks like there is no one obvious place where equipment serial numbers are stored.
    Further digging in to SAP I could make out that the serial numbers get distributed to tables SER01 to SER07 based on the activity performed with key in OBJK. I think I will be able to get there.
    I appreciate your time and reply.
    Regards
    Raj

  • Picking from interim area for outbound delivery

    Hi experts,
        When we receive goods from production to our interim area (901), we sometimes want to pick the goods from here for the delivery, The system is allowing us to pick form 901 ,but the TR is still open ,Is there a way of picking for Delivery from 901.,
    For example I received 100 pcs from production.I have a customer order for 40.
    We want to pick 40 from 901 and put the rest(60)  into Bin.
    Is there a way to deal with this?any help is appreciated.
    Thanks
    Chris.

    Hi,
    For your requirement, you need to keep the interim storage types in the Storage Type sequence in the configuration. Then only, system will allow you to Pick from the Interim Storage bins.
    This problem occurs only when you are not following the system standard sequence to Pick the product from the different storage types.
    As long as you maintain the WM and IM stocks correctly, you won't face any problem, otherwise it leads to lot of inconsistencies like you will see lot of negative stocks in Interim Storage Bins.
    With the above situation, you will be able to issue the product even if you won't have the stock physically in the Warehouse.
    Hope it helps you.
    Aktar

Maybe you are looking for