Stop printing of jdk1.1.8 GUI

Hi.
Please see below code that i used to stop the user from printing my application. This however does not work i found out today. Please can someone give me any ideas on how else to solve this problem. Take note that I have to use jdk1.1.8. Thanks a million.
Mainframe added keylistener and this is the keyReleased method.
//Code begins
public void keyReleased(KeyEvent e) {
if (e.getKeyCode() == KeyEvent.VK_PRINTSCREEN) {
e.consume();
I NEED HELP URGENTLY PLEASE.
Thanks
Darryl

Thanks for the confirmation DrClap. I thought as much. We need to stop the users from printing the screen because it contains signatures and copies of our cutomers cutomers id books. So to preventfraud they wantthe users to not be able to print. Thanks anyway.
cheers
Darryl

Similar Messages

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

All in One Printer C5180 stopped printing/scanning from mac 10.6.8

Hi
My All-in-One C5180 has stopped printing and scanning from mac 10.6.8. It had worked for the past few years but after not using it for 8 months (out of country) it hasn't worked since I came back. I have done as a few suggested, carried out a software update on mac and also downloaded a new driver from this site. Neither worked. The message appearing is " printer off-line" and the printer symbol has red exclamation mark.
Would really appreciate any help.
Thanks in advance
Anne

Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

HP Laserjet 400 M401n won't stop printing when more than 1 copy is specified

I use this HP Laserjet printer on a network. It's brand new. I print from both Macbook Pro and / or Mac Pro running OS 10.9.5. Downloaded and installed latest HP printer driver.
Problem: I can print 1 page just fine. But when I specify more than that, the printer will not stop printing copies for the number I specified. I have to press the cancel button to stop it. I have tried resetting the printer. No luck.

I don't use spell catcher.
I found a workaround posted elsewhere in the Apple discussion forum. When going through the printing dialog boxes, select Preview and print whatever number of pages I need from that window. It works fine so I'll use that method until a future Mac OS X update fixes the problem.
The security update for OS X on 3-1-06 didn't fix the problem even after I repaired permissions.
Thanks for responding.

Laserjet pro 200 color mfp m276nw stop printing memory low

laserjet pro 200 color mfp m276nw stops printing giving an error message that the is memory low. How do I clear the memory?

I have had the same issue, cannot print multiple pages without having the memory low error appear. I have cleared the faxes from the setting menu. I have done an NVRAM reset and am able to print a 3 page document once and then receive the low memory error when I attempt to print another 3 page document. Please PM me the way to resolve this problem. Thanks in advance.

HP LaserJet P1505n stops printing and blocks network interface

I have been using my P1505n for over two years without any problem. But it suddenly stopped printing. The scenario is as follows:
1. The P1505n is connected to a wired home network with reserved IP address in the DHCP server.
2. The P1505n is used from Ubuntu 10.4, 11.4 , Windows XP and Windows 7 without any previous problems.
3. The last partial successful print job stopped in the middle of a page leaving the rest blank: no paper jam.
4. I have reset the printer several times: turn off + press Cancel & Go + turn on while holding the two buttons down.
5. The first reset was successful: the toner level going from 40 to 100%. The next ones may have been successfull too.
6. After each reset and also after each power-on, I can ping and access the embedded web server.
7. Whenever I send a print job, the print queue on the computer (all OS behave identically) says "printing" and stops. I can cancel/remove the jobs from Ubuntu.
8. After the printer receives the print job, it silently blocks the network interface (no ping nor web) and doesn't print anything. No movementsm no LED blinking either: just nothing happens.
What is the reason for this problem? And how do I solve it?

Hi firedude007,
Welcome to the HP Forums!
I see that your HP Laserjet P1102w stops printing files from your Mac but not on Windows, and I am happy to help!
For further assistance, I will need to know the following information:
The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
In the meantime, I would try the following:
Reset the printing system. Mac OS X: How to reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP LaserJet CM1415fnw stop printing

My CM 1415fnw stopped printing today from every computer in the house. I have had this printer for about a year without any other problems. The wirless network test report states "pass" but the HP Toolbox FX states printer not connected to the network. I have reinstalled from factory settings and started from beginning again. Still same result. The only thing that has changed recently is I had to install a new wireless router in the house. That said, the printer was working fine for the last 3 days on the new router. Any ideas?

It may be that the printer got a new IP address from the new router. You might look at your printer properties on your pc and look under ports, open up the port and see what IP address it was configured for. Now print out a config report from your printer and see if they match. If they are different that may likely be the issue. To help elimate this problem, (some wireless router will force IP address changes quite often) the best thing to do is assign a manual IP address on your printer. Please refer to your manual or other support to see how to do that. You can use the printer's control panel to do this but you just need to make sure you don't choose an ip address that your router might try and give to another device (computer, etc).
Although I work for HP, my posts and replies are my own.

HP LaserJet P-1006 printer stopped printing after Windows update

One day this printer stopped printing. Items were queued, wouldn't print.
Tried changing cables.
Uninstalled and reinstalled HP software.
Ran HP Printer and Scan Doctor. Says it fixed Printer spooler error. Won't print test page. It's queued.
Ran Windows troubleshooter: Printer Spooler service isn't runng. However in Services, Printer Spooler is Started, Auto.
Installed on laptop -- printer prints fine.
I'm stumped.
Any help would be greatly appreciated.

Warbler, welcome to the forum.
It would be better if you started a thread here. You will receive more replies.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My hp laser jet 4050N stopped printing. What can I do?

My hp laser jet 4050N stopped printing. What can I do?

1. Please provide the year model of your iMac and which OS X it is running.
2. Reset your Printing System,
for 10.9 see > OS X Mavericks: Reset the printing system
for 10.8 see > OS X Mountain Lion: Reset the printing system
for 10.7 or earlier see > Mac OS X: How to reset the printing system
3. Test your printer, try printing from a different computer.
4. Go to HP > Troubleshooting Guide for Laptops, Printers & More | HP ® Support

HP laserjet 3300 mfp has stopped printing

My HP laserjet 3300 mfp has suddenly stopped printing. The error log gives no information although is has occasionally given the following message recently:
Error0=2009/10/15 14:54:44 - GetProductDeviceID: Not PML registered, so cannot unregister
Error1=2009/10/15 14:54:41 - unable to find and PML register with device
The trouble shooting process gets me nowhere: nothing has changed (except MS updates! ). I can see the printer from all control panels on the network. It says 'error' but gives no clue as to what that might be. I've tried printing with notepad and a test document and rebooting but nothing works. Its photocopying facility works fine. Help, anyone?

I would think the ip address and folder options of the printer is what probably changed and when you setup the printer again you did so with a new ip address but also had to put the folder info in again. Suggest you type in the ip address of the printer into your web browser and see if there is a link there to setup the scan to folder and if there is, put the correct information back in.

I have a HP Officejet Pro 8500A that stopped printing from my HP Pavilion notebook.

I have a HP officejet pro 8500a printer that has stopped printing. It will not print anything off of my HP pavilion notebook and I just found out that it will not copy anything either. Does anyone know what the problem may be?

HI @anewleaf , and welcome to the HP Forums!
I see you're running into copy and print issues. I'd love to help!
I have a few questions before we get the ball rolling:
Are you using Windows or Macintosh?
If you are using Windows, is it a 32-bit or a 64-bit system?
Do you recieve any errors?
Is the printer not printing any pages, or printing blank pages?
I'm including documents that will help you find the system info:
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My Wireless HP ENVY 4500 All-In-One Printer Has Stopped Printing PDF Files

I installed the subject wirelessly printer about 1 years ago. It works quite well with my iMac OS X10.9.1 desktop and my Win7 laptop PC. But, it recently stopped printing PDF files for no apparent reason, and I get no error messages.
It won't print PDFs from my browsers nor from Adobe Reader (11.0.07) ... but all other document file types print OK from my browsers and Reader.
The only thing that comes close to printing PDFs is that sometimes, when I try to print a PDF page or file from within Adobe Reader, it prints - on a single sheet - 6 tiny duplicate sections of what appears to be the upper right-hand quadrant only of the original PDF document.
Please note that I un-installed and re-installed the printer and its driver twice without success. Also, no amount of printer re-configuring of layout, size, etc. made a difference. I received some previous work-around advice about converting the PDFs to a Word document, and printing that. But this is just not convenient; and besides, the printer is suppose to print PDFs (PDF is my document of choice for basically all my collaborative work). I should also state that I received no help with this problem from the HP ENVY user group forum; so, I guess that means you may be my last resort. And finally, I don't know if this is relevant or not, but I upgraded my iMac from Snow Leopard (OS X 10.6) to Mavericks (OS X 10.9) a few months ago - this upgrade was frought with all sorts of teething problems! - and I am now somewhat suspicious that something in the upgrade might have something to do with my current PDF problem.
Could someone please advise me on any Adobe Reader and/or printer re-configs, re-sets or other actions I should try?
Thanks

Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

Mac os 10.6.8 & hp officejet pro 8500a plus (910g) stopped printing wirelessly.

hp officejet pro 8500a plus (910g) prints from mac os 10.6.8 with a usb, but stopped printing wirelessly
HP Network Configuration Page states Network Status: ready and Active Connection Type: Wireless
Wireless Network Test Report - looks A-O.K.
Turned off modem, printer and laptop & restarted modem, printer, laptop computer
Seems that the computer can't "find" the printer, maybe.
Any suggestions would be appreciated!

If you open System Preferences --> Print & Fax and click the "+" symbol at the bottom of the printer list on the side, you should get an "Add Printer" dialog window to pop open. Is your printer visible in that window?
If not, try printing a configuration report from the printer, to get the IP address your printer currently has. If you type that number into your web browser of choice (Safari, Firefox, etc.), does the printer's "embedded web server" page load?
If so, you could set up the printer on your Mac using the IP address in the "Add Printer" dialog. To do that, you select "IP" at the top of the window rather than "Default" (which is a discovery list), and paste the IP address into the "Address" field. If the printer is available, it should pick the model automatically.
Cheers,
dot11
I am an HP Employee
Please mark the post that solves your problem as "Accepted Solution"
Click the KUDOS Star to say "Thanks" if my answer solved your problem
I work for HP

HP Photosmart 7515 e-All-in-One Printer - C311a - printer stopped printing

I have owned this printer for less than 1 year and not used it heavily. While it worked, it worked well - no complaints. It suddenly stopped printing black about a week ago so I searched for a resolution. The resolution offered was to replace the print head. The instructions said that replacing the print head required that all print cartridges be replaced as well. The cost for all of this now exceeds the cost of the printer ($60 print head, $75 to replace all the ink) and the solution doesn't work. Now yellow and cyan don't print and the printer reports no problem. Rest assured that this is the LAST HP printer product that I will ever purchase. There is no support to speak of and no accountabilty for the problem. Coupled with the recent "update" that required me to install new software in order to get the fax to work again, I am more than disappointed with HP. I was a die-hard HP fan until now - bye, bye HP.

So the printer is less than a year, it should still be within warranty? Have you checked by entering the serial no. below....
http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie&lc=en
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Printer has stopped printing in black, HP Printer Photosmart 5514

My printer suddenly stopped printing in black. We have two computers networked wirelessly, and from my husband's computer there are no problems. From my computer I can print other colors, but not black. Test prints print in colors but not black. I have tried uninstalling software, reinstalling, and reconfiguring for wireless without success. Reinstallation seems to have gone OK but problem is not resolved. I have also tried to connect via a USB port, but no success here either. I turned off the firewall for the last installation but this did not help either.
Printer: HP Photosmart 5514
OS: Windows 7
No error message just blank pages
No system changes made
This question was solved.
View Solution.

Start by following the troubleshooting steps in this document, especially check the vent as shown in step three of Solution Six.
I suspect when you print the test page in Solution Six there will be no black ink on the page. Most likely the computer you have that appears to print in black has its media settings set to photo paper, which would use the color inks to print black.
If the printer is in warranty I would suggest you Contact HP for replacement.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Stop printing of jdk1.1.8 GUI

Similar Messages

Maybe you are looking for