Stop the oms
Hi,
how to stop the oms ?
Regards.
Hi Badri,
that is what I receive :
[oraoem@linux1 oraoem]$ oemctl stop
-bash: oemctl: command not found
[oraoem@linux1 oraoem]$ ./oemctl stop
-bash: ./oemctl: Aucun fichier ou répertoire de ce type
[oraoem@linux1 oraoem]$
Regards.
Similar Messages
-
Start/stop the OMS Services on Same Host
Hi,
I have OMS, Repository database and Agent on the same host.....
I want to stop and start the services...
==========================
FOR Shutdown
=====================================
Stop the Agent
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
stop the OMS Services
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopall
Stop the Repository Databas Listner
$cd $ORACLE_HOME/bin/lsnrctl stop LISTENER
STOP THE database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> shutdown immediate
====================================
FOR Startup
=====================================
start the Repository Listener
$cd $ORACLE_HOME/bin/lsnrctl start LISTENER
start the Database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> startup
start the OMS Service
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl startall
start the Management Agent
$cd $ORACLE_HOME/agent10g/bin/emctl start agent
======================================
is this the correct procedure...
can anybody help in this regard....As an outline, it looks ok I think.
You may need some env variables set up in the script, add some error handling, etc...
I want to stop and start the services...
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopallRemove the "cd" from your command lines. -
Sum
General
Upload Metric Data
Status
Status Pending
Availability (%)
Unavailable
Host
Version
Platform
Operating System
Operating System Agent Username
Unavailable
Interaction with Management Service
Upload to
Unavailable
Last Successful Upload
Unavailable
Agent to Management Service Response Time (ms)
Unavailable
Agent Upload Interval (minutes)
15
Detailed Status
Restarts (last 24 hours)
0
Secure
Unavailable
Agent Collecting
Unavailable
Agent Backed Off
No
Agent Purging Data
Unavailable
Above is the display from the agent page on the OEM console.
I have also checked the agents page and confirmed that the agent is not Blacked Out.Hi Krishnan,
emctl unsecure agent fails with the error:
[15-04-2015 16:28:19] USERINFO ::Checking Agent for HTTP...
[15-04-2015 16:28:19] USERINFO :: Done.
[15-04-2015 16:28:24] USERINFO ::Agent is already stopped... Done.
[15-04-2015 16:28:24] USERINFO ::Unsecuring agent... Started.
-115-04-15 16:28:25,294 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:29,521 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:29,523 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:29,525 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
2015-04-15 16:28:30,311 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:32,258 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:32,261 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:32,262 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
[15-04-2015 16:28:32] USERINFO ::OMS is locked. Cannot unsecure the Agent.
[15-04-2015 16:28:32] USERINFO ::Unsecuring Agent... Failed.
The OMS is on a Windows 7 VM. Do you know the command to unlock the OMS?
Thanks,
Jerald -
The OMS is not set up for Enterprise Manager Security
Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated. -
The agent can not upload the xml file in the repository of the OMS
Hi,
I install an agent 10.2.0.4 HP-UX v.11.23, 64 bit, which has an Oracle database v.10.2.0.4.
The OMS identified a single server, but no database.
I uninstall the agent and remove the server from the OEM (html).
I install agent again with the patch 6409645.
Configure a security key to the agent (emctl secure agent).
However, it generates a file error emagent.trc, when i start the agent:
2009-04-14 12:23:05,819 Thread-1 WARN collector: MESSAGE_NLSID "Successful Name Registration Request Sent By Identity Provider(%)" is too long, truncating to "Successful Name Registration Request Sent By Identity Provider(%"
2009-04-14 12:23:40,616 Thread-21 WARN upload: FxferSend: received http error in header from repository: https://gcontrol.manquehue.local:1159/em/upload
ERROR-400|ORA-01861: literal does not match format string
2009-04-14 12:23:40,619 Thread-21 ERROR upload: Failed to upload file B0000001.xml: HTTP error.
Response received: ERROR-400|ORA-01861: literal does not match format string
Please anyone can help me?
DavidHi:
Do the following in OMS host:
[oracle@gcontrol bin]$ ./emctl secure unlock
Oracle Enterprise Manager 10g Release 4 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the OMS... Done.
Stopping the HTTP Server... Done.
Updating HTTPS Virtual Host for Enterprise Manager OMS... Done.
Starting the HTTP Server... Done.
OMS Unlocked. Non Secure Agents may upload using HTTP.
[oracle@gcontrol bin]$
In Agent host:
$AGENT_HOME/bin/emctl unsecure agent
$AGENT_HOME/bin/emctl secure agent
$AGENT_HOME/bin/emctl start agent
$AGENT_HOME/bin/emctl status agent
$AGENT_HOME/bin/emctl upload agent
but the error continues:
2009-04-16 18:08:07,700 Thread-1 WARN http: snmehl_connect: connect failed to (delfos:1830): Connection refused (error = 239)
2009-04-16 18:08:07,700 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://delfos:1830/emd/main/. Returning status code 1
Even start the agent without security, but the error remains. (unsecure only)
2009-04-16 18:07:43,353 Thread-1 WARN http: snmehl_connect: connect failed to (delfos:1830): Connection refused (error = 239)
2009-04-16 18:07:43,354 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://delfos:1830/emd/main/. Returning status code 1
Not yet implemented $OMS_HOME/bin/emctl secure lock
Any idea?
Thanks for your help.
David -
The connection to the OMS is broken or has been actively interrupted
Hi Guys,
I am trying to stop around 170 targets on one of my envrionments and I am receiving the following error:
The connection to the OMS is broken or has been actively interrupted by the OMS (usually due to a communication timeout)
I am very new to EM so I am not really sure how to address this error. Could anyone tell me more about what this error is and what needs to be done to fix it?
Thanks
-Mark1)connect the modem to the router's internet port and the computer to the port#1
2)from the wired computer ,access the router using http://192.168.1.1 .. the default login password is admin
3)on the web ui , click on the "mac add clone" subtab , enable it and click clone..save the settings and do a power cycle
4)go to the "status" tab and check whether it has a valid internet ip add
5)if there is one , try going online .. -
Stop the report from firing until the user clicks the Go button?
Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
ThanksThanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks -
How can I stop the sharing on the iPhones that are on my account because its sharing everything even text messages and its driving everybody crazy
An icloud account is designed to be used by one user to keep his/her devices in sync.
If you have muitiple family members or friends using the same account as yours, then have them get their own Apple IDs and icloud accounts.
If you mean you want to stop the sharing between all your devices, then on any one device, go to Settings>icloud and turn off the services you don't want that device to share/sync. Or turn off icloud altogether if that's what you want. -
Is there a way of stopping the battery from charging?
Dear Apple Community,
Recently I installed iStat Menus and found that, over the course of this year, my Macbook's charging capacity has dropped 5%. I know this isn't a massive number, but battery performance has become a concern for me. I use my Macbook as a desktop replacement, on the main. It's sitting on a mStand, connected to a large monitor on my desk. I use my Macbook to play games, surf the internet, do work and all that good stuff - basically, I use it for everything. I rarely use the Macbook without it being plugged in. I read on the Apple website that they do not recommend leaving the Macbook on charge permanently and that I should use it on battery at least one a month. As I use my Macbook as a desktop replacement, I don't actually have a lot of opportunity to do this.
My question to you, the community, is: is there a way of stopping the battery from charging, either with the use of an app or a physical device? Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
On the other hand, am I just worrying about nothing? Will my battery be damaged further if I leave the Macbook charging permanently?
Thanks for your help!
Jeremy ReidIdeally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
The charging characteristics are handled in firmware. There is no app that would be able to do this. You actually would not want to do this anyway. Regularly discharging your battery to 10% will greatly decrease the life of your battery. While it is true that you should not use your system exclusively plugged in, allowing it to run on battery a few hours a week should be fine. Letting the battery regularly run down to (or below) 10% will cause you to use up cycles more quickly than is necessary (thereby reducing the life of your battery). It's really a only a matter of disconnecting your Magsafe connector once in a while.
Leaving it plugged in does not result in it being charged "permanently". It will charge until it is full and then charging will stop. It will only begin recharging when it reaches about 95%. -
Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)
I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni -
How to stop the Photoshop Image Processor.
I am using the Photoshop Image Processor in Bridge to shrink a large png sequence. But I started the process with the incorrect parameters. How do I stop the Processor once it has started?
If escape key does not work do not know how to undo. Hopefully you have a backup.
-
Can Not STOP the movement in Sliding Thumbs Menu
My sliding, gliding thumbnail menu is located at the bottom of the page, and it reacts to the cursor movements as intended. However if I were to move the cursor around the page somewhere on the top the menu is still reacting to the cursor movements. I would like it to become inactive once the cursor off the menu.
You can check the page at http://www.888acolyte.com and then go to "applications".
The menu consists of four frames. Frame 2 and 3 are united under the label "loop"
Here is my AS3 for the frame 1:
stop(); // Stop the timeline here
// Initialize variables for use on Frame 3
var calcTravelNum:Number = 0;
var myMouseX:Number = 0;
// Here we do not start this thing up unless their mouse goes over "bgClip_mc"
BGClip_mc.addEventListener(MouseEvent.MOUSE_MOVE, reportOver);
function reportOver(event:MouseEvent):void {
// If mouse has entered, start it up
gotoAndPlay("loop");
frame 2:
// Remove the start-up listener since it is not needed any longer
BGClip_mc.removeEventListener(MouseEvent.MOUSE_MOVE, reportOver);
frame 3:
// This all happens around 15 times per second due to looping and frame rate
// Redefine the mouse X position
myMouseX = Math.round(BGClip_mc.mouseX);
// Ready the calculations according to where the mouse is
if (myMouseX > 280) {
calcTravelNum = (myMouseX - 280) / 55;
} else if (myMouseX < 220) {
calcTravelNum = (220 - myMouseX) / 55;
// Move the menu according to calculations
if (myMouseX <= -250 && thumbsMenu_mc.x <= 60) {
thumbsMenu_mc.x = thumbsMenu_mc.x + calcTravelNum;
} else if (myMouseX >= -250 && thumbsMenu_mc.x >= -100) {
thumbsMenu_mc.x = thumbsMenu_mc.x - calcTravelNum;
// Go and play the loop label again, just keeps looping
gotoAndPlay("loop");
The position of the cursor moves the Sliding Gliding animated menu even if it is not on bgClip_mc. For the first time it works as it should but once it is activated and I move the cursor away from the bounding parameters of the bgClip_mc the Sliding Gliding Menu is still reacting to the mouse movements.
Please let me know what could be the fix for it.I am fairly new to AS3,
could you please provide a code and where it actually has to be placed or
point me to the appropriate tutorial?
Thnx -
HT204389 how to stop the voice over
how do i stop the siri voice over
If the above doesn't work, try this:
Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off. -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
Payroll area locked.How to Stop the workflow during this period ?
Dear experts,
In the travel workflows, after all the approvals, there is a standard task(Custom) with a custom method(BUS2089 Enhanced).
This method updates the infotype 2002 (Attendances). This works fine for the whole month except during the payroll run which will be for 3-4 days after 20th of every month.
We have maintained the exception for this when the control record is in the status '1' or '4', by passing a temporary error to the workflow.
SELECT SINGLE * FROM t569v WHERE abkrs = 'Z0'.
IF sy-subrc EQ 0 AND ( t569v-state EQ '1' OR
t569v-state EQ '4' ).
return-message_v1 = 'Employee Master data locked for Payroll'.
exit_return 1001 return-message_v1 return-message_v2
return-message_v3 return-message_v4.
As i understand the workflows can be restarted after solving the temporary errors.But this Temp error will only be solved after the payroll record is becomes 'Exit Payroll'.
The system attempts for 3 times in the period of 30 minutes and then the tempoarry error becomes a permanent error and this way the workflows goes into a permanent error which cannot be restarted even after the payroll is exit.Due to this may workflows are unable to update the Infotyp 2002 however their trips are approved at all levels.
This counter of 3 times and 30 minutes, I belive the system is taking from the error monitoring program (RSWWERRE / SWWERRE) in SWU3.
I am thinking of putting the workflow into 'Wait' state till the period when the Payroll is locked. This way , we can avoid the workflow even from going into temporary error.
Can anyone help in this regard ? Do we need to add a WAIT step in the WF Definition or control in the method code itself ?
Does WAIT UNTIL (ABAP Keyword) works for 3-4 days of payroll run if we implement in the method code itself?
-Anwar
Edited by: Sameer Anwar on Aug 20, 2011 9:44 AM
Edited by: Sameer Anwar on Aug 20, 2011 9:45 AMHi Sameer,
But , Can you pls put some more information on why we need to avoid WAIT UNTIL in Tthe ABAP ?
Wait Steps are only used where you have 1 event which the workflow would expect ...moreover this would require more effort in terms of implementation...( you will have to create an event manually after your payroll is open).
I would suggest create an virtual attrubute of the BO which will populate a whetherr the Payroll is locked or unlocked... then use this attribute as a start condition in the conditions tab of your step. this would stop the workflow until the payrol is open...
Regards
Gautam
Edited by: gautam maini on Aug 20, 2011 2:34 PM
Edited by: gautam maini on Aug 20, 2011 2:35 PM
Maybe you are looking for
-
Recently bought new PC (Dell with windows vista). Donwloaded latest version of iTunes from Apple website, successfully hooked up iPod nano (1st generation) to the Dell and able to copy CD's to my library and then player. However - whenever I buy some
-
Employee as a Vendor in Travel Management
Hi Experts, Please guide me about Employee as Vendor in Travel Management? Do we need to make employee as vendor for Reimbursement Payments.
-
IOS 8 nightmare do not download it.
after downloading iOS 8 my ipad2 is a nightmare to use?? Slow to respond, constantly crashing, shutting down Apps while I am using them, tried to print boarding passes today was impossibl??? I'v lost loads of info from my docs and bookmarks to name j
-
IPhoto: trouble with sending photos via gmail.
For some reasons, for about one or two months ago start having troubles with sending photos from iPhoto via gmail. It used to work perfectly, but now refuses to send photos. Pop up message says that there are some trouble with accessing accounts. Onc
-
I have a new issue with all DPs. When I pxe boot, it will boot into WinPE but then it will fail and reboot after the step: “Preparing network connections” I have tried reinstalling the DP and MP. Also redistributing the boot image. When I press F8 t