Stopped downloading Podcasts 'cos not listened for few days
Why does I-Tunes stop downloading my Podcasts when I've not listened to them for a few days? How do I turn this annoying function OFF?
It's an option the Podcast producer has chosen to help save them money on downloads that are not listened to. Although Apple provide the function, the choice to set it is down to the Podcaster, not Apple.
This is not correct: it's inherent in iTunes, see this page:
http://support.apple.com/kb/TA23353
which states:
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.
There is an AppleScript available which will apparently deal with this (I've not tried it):
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
Similar Messages
-
Query with SQL-SP gives error, if not used for few days
Hi All,
I have observed that if we do not use some of queries (which usage SQL SPs) for few days, then it stops working.
But when we go in SQL and execute the SP, the query in SAP starts working, without making any change either in query or the SQL-SP.
Can anybody throw light on this ? I guess it has some connection with SQL-SP behaviour.
Thanking you in advance ,
Samir Gandhi
Edited by: Rui Pereira on May 1, 2009 1:28 PMHi Gordon,
Please note the function of the SP is to bring selected data from tables, for example to bring Purchase details (I have copy pasted the SP at bottom of this message).
These are not SP_notif...
These SPs are called from the SBO query.
Once we execute the SP in SQL, then it starts working with SBO also.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[pGetPurchaseRegister]
@StartDate datetime,
@EndDate datetime
as
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tmpPurchaseReg1]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table tmpPurchaseReg1
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tmpPurchaseReg2]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table tmpPurchaseReg2
SELECT T1.LineNum,T0.DocNum AS 'Document Number', T0.DocDate AS 'Posting Date', T0.CardCode AS 'Vendor Code',
T0.CardName AS 'Vendor Name', T0.NumAtCard as 'Vendor Ref. No', T0.VatSum AS 'Total Tax', T0.DocTotal AS 'Document Total' ,
T1.AcctCode AS 'Account Code',T1.LineTotal AS 'Basic Amount', T1.ItemCode AS 'Item No.', T1.Dscription AS 'Item/Service Description',
T2.SuppCatNum, T1.INMPrice AS 'Item Cost', T1.Quantity AS 'Quantity',T3.ItmsGrpNam AS'ItemGroup'
into tmpPurchaseReg1
FROM [dbo].[OPCH] T0
INNER JOIN [dbo].[PCH1] T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN [dbo].[OITM] T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN [dbo].[OITB] T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
--WHERE T0.DocDate >= CONVERT(DATETIME, [%0], 112) AND T0.DocDate <= CONVERT(DATETIME, [%1], 112)
WHERE T0.DocDate >=@StartDate AND T0.DocDate <=@EndDate
ORDER BY T0.DocNum
select * into tmpPurchaseReg2 from tmpPurchaseReg1
declare @Total int
declare @TmpCardCode varchar(200)
declare @DocNum int
declare PurchseRegister_Cursor cursor LOCAL for
select [Document Number] from tmpPurchaseReg1 group by [Document Number] having count([Document Number]) > 1 order by [Document Number]
open PurchseRegister_Cursor
fetch next from PurchseRegister_Cursor into @DocNum
while @@fetch_status = 0
begin
begin
drop table tmpPurchaseRegTemp
select top 1 * into tmpPurchaseRegTemp from tmpPurchaseReg2 where [Document Number] = @DocNum
select @TmpCardCode =[LineNum] from tmpPurchaseRegTemp
update tmpPurchaseReg2 set [Vendor Name] = '',[Total Tax] = 0,[Document Total] = 0
where [Document Number] = @DocNum and [LineNum] <> @TmpCardCode
end
fetch next from PurchseRegister_Cursor into @DocNum
end
close PurchseRegister_Cursor
deallocate PurchseRegister_Cursor
BR
Samir Gandhi -
Search function not working for few days ??
I try to search for object that I have searched before and got results.
now I don't get any result on any search query I give. yesterday I thought , OK I will wait for tomorrow then it will be resolved. but now it's still not working ?
for instance search on CL_SALV_TABLE is giving no results ?
am I the only one experiencing this problem or is it community wide ?
kind regards
arthurHi Arthur,
we are aware of the current search problem and our development team is working on it. In future please report such bugs to [email protected]
Regards,
Folkert -
iTunes automatically stops downloading podcasts when I haven't listened to them for some arbitrary period of time. I want to turn this off so it always downloads.
iTunes will stop updating a podcast subscription if you have more than five episodes downloaded but not listened to, as detailed in this page:
http://support.apple.com/kb/TA23353
which states:
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.
There is no setting in iTunes to change this, but there is an AppleScript available which will apparently deal with this (I've not tried it):
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts -
Why "stop download video" feature not show when playing video
why "stop download video" feature not show when playing video,, i hope you can give me Solution for this problem because when i using 3g internet, it downlaod the video Quickly ,,, so it consume the Balance
Do you have Flash installed? Check HD > Library > Internet Plug-Ins
If the Flash Player app is not in the Internet Plug-ins folder, download and install from here.
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
After download ios5 my recently download podcasts do not appear in recently added playlist on my iphone. Anyway to change this?
I had this problem with some podcasts immediately after updating to iOS 5. In order to resolve the issue, I did this:
1- Deleted/unsubscribed from all my podcasts.
2- Synced to my iPhone.
3- Resubscrubed to all my podcasts.
4- Downloaded all podcast episodes I wanted. (You could instead restore from a backup if some episodes are no longer available for download.)
5- Synced to my iPhone. -
Material Description is not displaying for few records in Report
Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk. -
I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug
@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion. -
I can't get the laptop to start. I get to the gray linen screen with a gray apple and stop. It will not ask for log in.
What do I do now?Hold the shift key at boot time, then run through this list, did you install anything recently or perform a update of some third party software? Uninstall it.
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive -
Is anyone there?
I have a softwre update on my iphone 4. but the button to download & Install is not lit for me to push.Over the air upgrades are only active with iOS 5 or later. You will ahve to upgrade using iTunes.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
My iTunes movie stopped downloading and will not resume. Any thoughts
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If it's a purchased movie, then just redownload it from the cloud (if not a rental)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519 -
How can i shut down depreciation for an Asset for few days??
Hi Friends,
How can i shut down depreciation of a particular Asset for few days say 5 days??
I have done the necessary changes in Time dependent tab like checked asset shut down and in AFAMA i changed the shut dawn as YES.
The only problem i am in is "how can i maintain the 5 days like from 10.05.2009 to 14.05.2009
If i go to MORE INTERVALS then only From date is available over there.There is no To date opition.
How can i maintain To Date??
Plz suggest.
Regards,
SumayaHi
Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
In asset master data
Go to time dependent terms,
Define the appropriate time interval for shutdown
Set the shutdown indicator
The system does not calculate the depreciation for the shut down period,
The useful life of the asset will increase to the extent of shutdown period.
When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
Regards
Tanmoy -
ABAP Program gives error after running successfully for few days / months
I have a problem that sometimes my programs start giving errors or does not run at all after successfully running for few days / months.
But, when I copy the same program with a different name (without any changes ) it starts running again.
Yesterday I had another problem. I was sending a request to be transported to Production Client, and the request was not getting transported. But when I changed just the name of the program, It was transported to Production Client.
I can't understand where the problem lies and what happens to the programs after running successfully for few days. All I have to do is just copy that programm into another name and it starts running.
Can anyone help me?
Regards,
SK Danielabout the transport thing..i had the same problem few months back the reason was, i included a table which is having different package from my program..so wot im thinking is when you creating a different program u might be assigning different package to this new program and this package is same as all the tables included in your program...
regards -
My 2nd iPod 4G Doesn't Work For Few Days
Hello.
I come here because I've got a probleme with my iPod 4G for few days now.
It's my second iPod of this generation because another that I had have bugued.
Now I explain my problem :
- First Last week my iPod started to have very high latency.
- Then I tried to play a song and my iPod blocked and display a icon of a "sad iPod".
- Finally now, It boot but after display the apple it's displaying directely icon of "Sad iPod".
So I can't connect it to my computer because like it can't boot, the computer can't synchronize it.
So I can't restore it like it's mentionned on the website.
My computer is a PC : Windows Xp Pro and I've never had a problem with my iPod 3G I don't understand...
I'm desesperate without my music :'(
Somebody can help me please ? I need your help ! Thanks.
PS : Sorry if my english is not very good but I'm french and I learn it for 3 years now so ...Have a read through this post.
http://discussions.apple.com/message.jspa?messageID=2369954#2369954 -
hi all i have a iphone 4s i have downloaded ios6 which seemed fine for 2 days then my phone froze i have tried plugging into my computer and the computer can even pick the phone up its not showing my phones details it wont update and it wont restore please anyone got any ideas.thanks
Try using this tool to search for apps which are compatible with older iPhones:
iOSSearch - search the iTunes store for compatible apps.
I did a search for GPS and founds lots of compatible apps. You might try typing GPS -tomtom to eliminate the tomtom apps.
WhatApp isn't compatible with the older devices, but enter Texting in the search box to find many texting apps which should work.
Maybe you are looking for
-
PDF files will not open or download
Recently my PDF files stopped opening up or downloading in Safari. It just starts to access the pdf file in the browser and then stops. I reinstalled Acrobat. Any ideas?? Lee
-
No Sign of Compressor files in preferences
I have been having trouble with compressor since sometime in the spring (Mac OS X V10.5.5) I had been trying all of the suggested fixes (pacifist and all of that) Then i just gave up on it. I am back to trying to work with it and was going to trash t
-
Create tablespace whose name length is greater than 50 ?
Can i create tablespace in oracle 10g whose name length is greater than 50 characters ?
-
New URL Request (_blank) Without Address or Scroll Bars Present
Can anybody please give me the AS3 code to open a new window (URL Request) without it displaying the address or scroll bars? I want to have a text link in a flash scene like "Click Here" that opens a new blank window (600 x 400) with a new URL withou
-
Presentation_Model javascripts are not loading while customizing OpenUI
Hi All, I would like to know, if any one tried to customize the UI with given examples like adding google map hover, partialrefresh javascripts in Oracle documentation [Configuring Open UI.pdf] I tried to follow the steps given for changing "manifest