Storage location addition in DS

hi all,
i am assigned to enhance the storage location in the 2lis_13_vditm ..
i am confused , ineed to do it urgently ,
plz explian me in detail how to do this step by step from scretch .....
Sruthi

Hi sruthi,
Please find a link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
Regards,
Meiy
Message was edited by:
Meiyalagan K

Similar Messages

Re: ATP check at storage location level in sales order.

Hi ,
I have a requirement wherein storage location is determined in my sales order, the ATP check is done at plant level as well as storage location level , and the smaller of the two quantities is taken as the result of the ATP check.
My requirement is that the ATP check should only be performed at storage location level .
Please suggest if there is any standard setting available in SAP.
iF NO , PLEASE SUGGEST SUITABLE USER EXIT, WHERE I can add my requirement.
Regards,
Nilesh

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

Availablity check at storage location level in STO

Hi,
There is an unique requirement from my client with respect to the Availability check at storage location level in STO
Process:
Based on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
During this availability check the stock will be considered at plant level and not at storage location level.
Requirement/Scenario:
Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
Example
Total required qty: 1000 of material X
material X - Stock in Storage location A : 600
material X - Stock in Storage location B : 400
Two separate line item needs to be created in the STO
Sl no
Material
qty
Issuing storage location
1
X
600
A
2
X
400
B
Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
Please suggest how to achieve this. If any enhancements needs to be done we will do it.
Thanks & regards,
Prashanth

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

ATP at storage location level

Hi Gurus,
Can anyone help me how to check ATP at storage location level in the plant in Order and delivery processing.
I have seen configuration that ATP will happne at the plant level.
Venkat

Hi,
Availability Check at Storage Location Level
Example:
Plant stock (1000 pieces) is made up of the stock from storage location 1 (800 pieces) and the stock from storage location 2 (200 pieces). Requirement 2 in amounting to 500 pieces is to be withdrawn from storage location 1. This storage location currently contains 800 pieces. However, requirement 2 cannot be completely confirmed at plant level as only 300 pieces are available. Therefore only 300 pieces are confirmed for requirement 2. If the system confirmed the full requirement quantity, the availability of the confirmed issue 1, for which the issue storage location has not been specified and which draws on plant stock, would be jeopardized as it would be short of 200 pieces.
If the storage location is excluded from planning or if it is planned separately, then there is no longer the need for an additional check at plant level since stock from this storage location is not contained in plant stock.
If a storage location is excluded from planning or if it is planned separately, the check cannot be activated without a storage location (see Scope of the Availability Check).
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Regards,
nandha

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Material transfer from one storage location to another storage location

HI
ISSUE : Actually we have to post 4 no's from storage location 1500 FNWP to 1500 BSTR
.by MB1B T.Code.But System takes 1,001.96gms automatically. *( movement type 911 E ) ( they want to post in units EA )*
Solution : In material master data classification tab given material conversion so when we raise mb1b then automatically it is converted to GRAMS
Is it correct ?

what is the base unit of the material?
EA
are UNE and EA maintained as alternative units?
sorry i dont know une meaning but in material master data in addition tab they maintain conversion from EA to Gram.
what is the unit used in the the sales order?
EA

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Help required !! For MRP at Storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
Thank you in advance.
Regards,
Krish.

Hi Krish,
Go to following IMG path and check out your settings -
IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
(1) Activate MRP for MRP Areas -
Is that activated?
(2)Define MRP areas>>>> Do setting s as per Storage Location
Then run MRP.
MRP Areas
In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
You can assign a material to various MRP areas.
Basically, there are three types of MRP areas:
Plant MRP Area
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
Hope this will give you more idea about the same.
Satish

UD for a Material in HU-Storage location

Hi Gurus,
I have situation where Stock posting tab is not coming while doing the UD for a material
Process flow is below:
1. Creation/Release of Process - Inspection lot get created since early lot creation status REL CALC
2. GR of Process Order is done in MIGO in Hu storage location
3. Inbound Delivery is created (WM integration)
4. Inbound Delivery is processed with TR creation/Confirmation
5. Stock can be seen in Q under HU active storage location & Material document is created in IM . Inspection lot status is same
6. Result recording is done against Lot Status INSP RREC
7. While doing UD. Tab for Stock posting is missing. Status UD ICCO CLAS STUP
This inspection type has following settings: - tick post to insp stock, Insp with task list , early lot creation , auto UD etc
Not sure what I am missing some settings since that is HU storage location
Please guide
Thanks,
Ishwar

Hi Yogini,
Thanks for that .
I tested as per suggestion but that is also not working basically no inspection lot is getting created for the GR after completion of WM transaction
I have tested my senerio for non-HU storage location (doing GR in no-HU storage location ) & that works correctly . After UD i was able to see tab for stock posting & stock get posted successfully
I think need expert advice who has work on QM-WM integration part ... can we able to post the stock from Quality stock from HU storage location to unrestricted use using only IM transaction ( QA11/12 ) or do i need to perform some additional steps in WM ?
Thanks,
Ishwar

Storage Location exclusion from MRP problem

Hi all,
I have added some Storage locations to exclude from MRP, via SPRO cust.
(Production>MRP>Planning>Define st. loc. MRP per Plant)
However, when I want to verify it, I go into MD04 and for a material, the excluded storage loc. lis does not show up in the end.
What additional cust. do I have to do?
Thanks,
Screens:
https://picasaweb.google.com/koray.tulumen/Paylasacaklarim

Hello,
To exclude the storage location from MRP Run
Check the following settings:
1.In OMIR you can exclude particular storage location. input values as 1
2.MRP - 4 view For storage location option input value as 1
3.in MMSC - same input value as 1
Hope the iformation is useful
Regards

ATP check avoid block other storage location

Hi Gurus,
Let's say there is 4000 EA available in storage location 1000, but in the order we enter 5000EA. I don't want to addition 1000 EA block other storage location like 1603/1608, only block own location 1000 waiting for replenishment.
We defined the storage location in sales order, but still the ATP check will block the stock in other storage location.
Can I know your idea?
thanks.

Hi,
Couple of notes you can check of;
Note 547118 - FAQ: Result of ATP calculation
Note 547512 - FAQ: Customizing of the ATP in R/3 (Question 8).
Regards

Storage Location Authorizations

Dear Gurus
We have recently implemented SAP in our Organization and have activated Storage Locations' authorizations. Our requirement is to limit the authorization to issue and receive material from individual storage locations but at the same time the users should be allowed to dispatch material for other storage locations (through 2 step transfer posting by posting "Remove from Storage" transactions). The problem is that at present the users are not able to select Destination Storage locations (in 2 step transfer posting - remove from storage) which are not authorized to them. On the contrary authorizing them for those Storage locations will authorize them to issue / receive material in other's storage locations.
I will appreciate if any of you may guide how to resolve this problem.
Regards
Muhammad Asif Nakhuda
Edited by: Asif Nakhuda on Jul 31, 2010 10:34 PM

Hello Ahsan,
Addition in SU22 in not for introducing authorization checks. It is misconception. All it does is the following:
For example you add auth object X for as transaction Y in Su22/SU24 . Now if you add transaction Y to a role in PFCG then authorization object X will be added by default in the role. For standard transactions SAP has maintained Su22/SU24 customizing on basis of ABAP code so that whenever you add a transaction to a role its correspnding authorization checks are added automatically to a role and you dont to take pains of finding them out. In case of custom built transactions also you can follow the approach used by SAP. SU22/SU24 is for easing role adminsitration ands not introducing authority checks !!
Regards.
Ruchit.

Unrestricted Stock of issuing Storage Location in reservation

Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GR

HI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna.

Storage location addition in DS

Similar Messages

Maybe you are looking for