Storage Unit stays after L_TO_CREATE_DN

Hi,
I use L_TO_CREATE_DN to pick SUs (Storage Unit) and post goods movements. I give the parameter "KOMIM = 2".
The WM Stock (LQUA table) lines disappear as expected, but the SU header data (LEIN table) stays without any change. It causes many problems.
Any ideas ?
Regards,

Hi.
By using L_TO_CREATE_DN, you are creating and confirming TO?
When you create a TO you should get your SU assigned to it (if your storage type is not bulk or open storage etc.)... I gues that works for you since you have automated the process... So after confirming the TO, this SU should disappear (check in LS33 for your SU if it exists), but it doesn't necessarily have to disappear - e.g. if your SU has 100 cs and you picked 50 cs from it. It should still exist with qty of 50 cs.
Instead of looking at table LEIN, check if your SU is showing in LS33.
Regards,
Mihailo

Similar Messages

  • To Create New Storage Unit Automatically

    Hi all,
    I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
    First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
    But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
    Regards,
    techmaster

    If you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
    Best Regards, Dirk

  • Problems when creating a  transfer order for moving storage units

    Hi,
    When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
    is displayed. When i use the FM again after this message then the TO is created correctly.
    When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
    PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
    The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
    Does anyone have a solution for this problem?
    Thx in advance.
    Kind regards,
    John Nijburg

    Hello,
    I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore. 
    CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
    In case you need it syncronous use PERFORMING clause together with WAIT UNITL
    Hope this helps!
    Cristian

  • Need Ideas For Storage Units Data Storage Capabilities - Special Attributes? History? 2 Ind-UMs

    Hello experts,
    The company I'm working for is looking into permanently-storing pallet level information (keep a history of the pallet movements) and use RF-scanners to move product in the warehouse. They have made a decision to implement Warehouse Management's Storage Unit Management functionality. They looked into Handling Units as well, but they don't want to use HUs for many reasons.
    They would also like to store 2 units of measure at the Storage Unit level without activating "Catch Weight Management" because that would require them to run parallel systems for a while and also deal with CWM functionality restrictions. Keep in mind that most of the products they handle are catch-weight products, so UM conversions don't work for them.
    Solutions I have in mind:
    For storing 2 independent UMs: Store the quantity of the 2nd unit of measure in a custom table at the Storage Unit level and use custom RF-scanner programs to "receive, issue, scrap, and move" goods in the warehouse. These custom RF-scanner programs would update SAP standard table with 1st (base) UM and also custom table with 2nd UM.
    For permanenlty-storing SU history: Use custom table to to store Storage Unit History. The custom programs created to handle the SUs would update this custom table.
    Last time I checked, the history of a Storage Unit is not recorded in SAP, correct? ONLY in Handling Units, correct?
    OR are there any documents/tables that permanently store the Storage Unit number so they can be queried after the Storage Unit is consumed/issued?
    I know SAP keeps improving its applications with every release, so I'm just looking at my options here.
    Does anyone else have any other ideas on how to approach this other than Using Handling Units & Catch Weight Management?
    Thanks in advance!
    -Mr. Bello
    Message was edited by: Jürgen L

    For storing 2 independent UMs
    Can you please explore the LS26 option there also system is allowing you to change the parameter"Unit of measure" and displays the stock on different UoM, hopefully this will solve your problem and you need not design a custom table to store the value at different UoM level
    For permanenlty-storing SU history:
    System store the storage unit related value in table : LEIN however the moment you do any consumption or movement to non SU the entries goes off from this table hence i think the approach taken by you seems the only one approach  to store the historical data. (Make sure you are taking into consideration of the archiving activity as you proceed further the size of database will get bigger and time to generate any report will take longer then expected

  • Stock Type Changes for Storage Unit Mgt.

    Hello,
    I am looking to develop an R3 system program (in ABAP) which based on certain criteria can change a storage unit's stock type between unrestricted, quality, and blocked.  I know there is a BAPI, 'BAPI_GOODSMVT_CREATE', which can be used to do the Posting Change in IM and there are function modules, L_TO_CREATE_SINGLE, etc, which can be used to create/confirm transfer orders for the storage unit in WM, but I was hoping someone can provide guidance on how I could make this simpler.  Is there a one-step method I can use to combine the movements for IM and WM (either programatically or through configuration).  Any help would be greatly appreciated.

    Hello Allen,
    Thanks for detailed explaination,
    Here is the one BAdi available to meet your requirement ( SPRO-> Log Exe -> Warehouse management -> System Modification -> BAdi in WM -> Badi for Quant determination)
    <b>Business Add-In for Quant Determination</b>
        Application components: LE-WM, LE-WM-TFM
    <b>Use of this component</b>
    You can use the BAdI LE_WM_LE_QUANT in the Warehouse Management system (WMS) to influence quant selection for a posting change notice after the system has determined all of the quants that correspond to the specifications in the posting change notice.
    if the system has determined more quants than are necessary for processing the posting change notice, you can restrict the quant selection further, so that you can process the posting change notice in the background.
    Hope this will be helpful
    regards,
    Arif Mansuri
    Reward if answer is helpful.

  • To print transfer order and storage unit labels in lt31

    Hi SAP Gurus
    1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
    If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
    2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
    My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
    Requesting to help in this issues
    Thanks in advance
    Regards
    chandu

    you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
    LE----WM---Activities-----Define print control
    After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

  • TO Error: Source HU ******* is not contained in Source storage unit *******

    Dear All,
    Our warehouse Handling Unit managed. I have created a delivery which is partially picked.
    After that when I am trying to create Transfer Order, I am getting an error "*Source HU ******* is not contained in Source storage unit ******"
    I am getting a pop up window in the name of "Enter withdrawal of Handling Units", and it is asking me to enter the Quantity to be repacked.
    I am getting this error only when I am doing Partial picking.
    How to get rid of this error. Kindly suggest.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on May 26, 2011 10:47 AM

    Hello
    This can be the whole pallet have to be withdrawn from the source (flag LTAP-HOMVE is set on, 'X'), but HU picking control does not propose the source HU as the destination HU (flag LTAP-HUPIK is clear, ' '). Kindly check.
    If that is not the case then, for your reference refer following SAP notes:
    - 662020:      Processing of TO with different storage types
    - 514604:      Storage unit is not deleted when posting goods issue
    - 721901:      Errors LF-064, L3-848 while picking w/o pick-HU
    - 552073:      Message L3222 when creating transfer order with LT09
    - 505542:      Incomplete TO confirmation in Transaction LT0H & LT0I
    Thanks & Regards
    JP

  • Storage unit activation for warehouse number

    Hi,
    User is facing two problems.
    1.They could not go directly to TO screen after doing any warehouse management transactions.
    2.In TO user wants to enter storage units options but could not find any list.
    I could find that warehouse no which is assigned that storage location is not actived for storage unit management.
    Can I delete this warehouse no. and copy new warehouse number which is active in storage unit management.
    There are some TO already created for this warehouse no.How should I proceed in this issue.
    Can we reverse TR and TO.
    Please give some solutions
    Thanks

    Config:  LE \ WM \ Master data \ define control parameters
    Tick box bottom left.
    Before creating a whole new WHS, in your Sandbox system try completing or cancelling every outstanding task related to the Warehouse e.g. TRs, PCNs, TOs etc. and then activate SUM as above and for applicable Storage Types (NOT interim ones).  It might save you quite a bit of effort.
    If it works (I've never tried it but don't see why it wouldn't) in Sandbox then also do in Development and Pre-Production, then do the same in Production over a weekend and get the Warehouse guys to complete all operations, transport settings across and you're done.  Alternatively you can cancel outstanding operations but you then need to note and re-create.
    Regards,
    Nick

  • Simple Storage unit management by using of 'real' handling unit data

    Hi all,
    actually we have a WM setup to use the full handling unit management in Warehouse. After some years we detected that the HU managed
    Warehouse is not the best solution for our business.
    Inside of WM we do no more want to have the Handling units. The assigned storage location is not HU managed.
    Now to my question:
    We receive from other plants finished goods via inbound delivery. All goods are packed on Handling Units.
    When doing the good receipt, Is it possible to use the HU data (vekp, vepo) and create according to it the WM storage units? So one Handling unit
    from the inbound delivery will become one storage unit.
    thanks in advance for your answers.
    Michael

    Hi Patrick,
    we actually have SAP WM with HU management running. but we want to go back to WM without HU management - only with the storage unit management.
    when getting an inbound delivery from another plant (in the same client) goods are batch managed and packed on HU´s. i am searching for a possibility to use the HU data from the inbound delivery to create the WM storage units. So one HU should become one WM storage unit.
    so i will post to an ERP comuity.
    thanks
    Michael

  • If I have three apple devices, each eligible for a 5GB storage account, can I combine the three into 1 15GB storage unit?

    If I have 3 devices, each eligible for 5GB storage, can they be combined into1 15GB storage unit?

    Thanks. After posting the question I saw others had asked he same. A solution mentioned of opening three accounts is not practical considering the cost of additional storage.

  • Function module  which changes the Storage Unit (SU) Block Data like LS32

    Hi,
    Is there any Function module  which changes the Storage Unit (SU) Block Data as done in  LS32.
    Thank you,
    Prashanth A.

    Hello Pablo.
    Yes we did run LT04 and it does encounter that same error message after clicking the Stock Removal button.  But eventually error msg will be removed by entering the value at the Storage Unit Type field because it directly fills in LTAP-LETYP.
    We have resolved that the function module will not really fill the desired Storage unit type therefore TO background creation is not feasible in our scenario (non-SU managed transfer to SU-managed storage type).  And I found this thread too:  http://scn.sap.com/thread/1947358
    So issue is still open but we have considered of changing the process since this is still just a new scenario for us.
    Thanks a lot for your inputs!

  • Unable to confirm transfer order due to error message "enter a storage unit

    Hi guys:
    I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

    Hi Allen...
    Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
    Pls confirm and revert
    Regards
    Shiva

  • Split transfer order on the basis of Storage Unit type(SUT)

    Hi,
    I got one problem and want the solution for that immediately.the problem is as follows:-
    The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
    I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
    Eg.One scenario is provided
    •Scenario 1:     Perform transaction MIGO with a movement type ‘101’ for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
    the result should be as follows:
    •Scenario 1: Check TO’s created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select ‘Transfer order Item’. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TO’s to have been created.
    Means one TO got splitted in 3 TOs.
    Please provide me the help.

    Hi Vinay,
    This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
    Hope it helps.
    Have a nice weekend!

  • Mixing materials with different Goods Receipt date in the same Storage Unit

    Hello everybody,
    I´d like to know how  FIFO strategy would affect to this example:
    Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
    Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
    Thanks in advance for your help

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • External Storage units to be entered in the Creation of Transfer Order

    Hi Experts,
    We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
    The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
    please guide us how todo it
    Thanks in advance

    Hello Kirankumar,
    It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
    Now when you create Transfer order for material document at that time you can assign SU number externally.
    Hope this helps.
    regards,
    Arif Mansuri

Maybe you are looking for