Strange Issue with Pop-up LOV with key value return

Hi,
I have a region, containing several LoV items. One of the items is of type PoP-up LoV with return key value.
Now when i run this page, i get page cannot be found error. But, If i a change the item type to select list with submit ( and not pop up lov with return key), I am able to run the page. It does not give me page cannot be found error.
Please suggest some pointers as to why I am running into this issue when item type is pop-up lov with return key value.
Regards,
Rave.
Edited by: Rave on May 13, 2009 5:13 AM

what version of apex are you using? Can you recreate the problem on apex.oracle.com?

Similar Messages

Turnaround for having pop-up lov with redirect

Hi to all,
is there a way to modified somewhere pop-up lov and adding a redirect to it?
Maybe with some javascript?
Any suggestion would be very appreciated.
thanx a lot

Hi Marcello
"onfocus" is working for simple PopUp LOVs.
I use the following for submitting Popup LOVs:
HTML Form Element Attributes: onfocus=javascript:doSubmit("REQUESTX")
Thats no redirect, but you may use a simple branch for same effect or another javascript-command.
This works with 2.2.1 only for PopUp LOVs, not for PopUp Key LOVs!
Best regards,
Matthias

POP up LOV with check boxes for APEX 4.0

I'm using APEX 4.0 on Oracle 11g and I will like to be able to select multiple selections when the POP UP dislplays. Is there a way to add check boxes?
Thanks In Advance
Jenice

Hallo to all,
again i can't find any turnaround for having a pop up, working with the technique I mentioned.
Did anybody know a turnaround / can point to a good link?
I'm very frustrated because with select list based on query works without problem... (but using this object is not the case such the user have to insert new value as well directly from the tabulare form).
Thanx
Message was edited by:
Marcello Nocito
Message was edited by:
Marcello Nocito

Strange issue - unable to establish PPP with Cisco 887 VAG router on one particular ADSL line

I have a strange problem that I’m struggling to get to the bottom of with my ISP and wondered if anyone could help.
We have a site with an older Cisco 877 ADSL router which was working happily until a few weeks ago when the connection dropped suddenly (out-of-hours at 2am if that’s of any significance – made me think most likely something carrier/ISP related?)    When connectivity was lost, the router could sync with the BT exchange (we are in the UK) but could not establish PPP.
We logged fault with our ISP – after some to’ing and fro’ing, they passed it onto BT and their engineers visited site, they fixed “a line fault” (we don’t get much detail on what was actually fixed) but we still could not establish connectivity – same thing, solid CD light but no PPP.
So, we replaced the router with another 877 – same again, solid CD but no PPP. We replaced all the cables and microfilter etc but no difference.
We tried a different Cisco router (a newer Cisco 887VAG) which, as I understand, uses a different modem chipset but no matter – PPP could still not be established. We tested this router on another ADSL line with the same ISP and it worked without issue, using the same ADSL account details, it was able to establish connectivity. So we figured this must still be a BT/ISP issue.
Since then we’ve had BT out again twice but they say there is no fault. The ISP say there is no issue with them. But we still cannot establish ADSL connectivity on this line, despite having tried 3 different ADSL routers and despite the fact the routers work with the same account details on another ADSL line.
The 887VAG router we have currently connected has 3G backup so that is keeping us going in the meantime and also means I can login to the router remotely to check on the ADSL status.
But I’m struggling to pinpoint where the problem may lie.   Strangely, if I turn on PPP negotiation and authentication debug then I’m not actually seeing any output from it at all?
Yet, the ATM interface is up and shows packets being sent and received:
ATM0 is up, line protocol is up
Hardware is MPC ATMSAR, address is bc16.6596.9b00 (bia bc16.6596.9b00)
MTU 1600 bytes, sub MTU 1600, BW 704 Kbit/sec, DLY 520 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Keepalive not supported
Encapsulation(s): AAL5
4 maximum active VCs, 1024 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input 00:00:28, output 00:00:07, output hang never
Last clearing of "show interface" counters 6d23h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
     23886 packets input, 1676964 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     56469 packets output, 4418592 bytes, 0 underruns
     0 output errors, 0 collisions, 6 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
Does anyone have any ideas on where the problem may be and what more I can do to troubleshoot and provide the relevant evidence to our ISP (assuming it is an ISP/BT issue though the fact the same router works ok with the exact same details etc would seem to indicate it must be their issue!)

Hi Jody,
thanks for the suggestions. Here's what I see from the ppp debugs (but I'm not sure how to interpret?)
Jan 6 14:50:22.838: pppoe_send_padi:
contiguous pak, size 74
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 FF FF
FF FF FF FF BC 16 65 96 9B 00 88 63 11 09 00 00
00 10 01 01 00 00 01 03 00 08 0C 00 00 01 00 00
04 A3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 ...
Jan 6 14:50:22.878: PPPoE 0: I PADO R:0030.8810.000b L:bc16.6596.9b00 0/38 ATM0.1
contiguous pak, size 71
BC 16 65 96 9B 00 00 30 88 10 00 0B 88 63 11 07
00 00 00 33 01 03 00 08 0C 00 00 01 00 00 04 A3
01 02 00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73
2D 62 61 73 2D 42 32 32 36 45 34 37 30 39 45 30
31 34 5A 01 01 00 00
Jan 6 14:50:24.885: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:50:35.125: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:50:45.364: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:50:55.603: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:51:05.843: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:51:16.114: OUT PADR from PPPoE Session
contiguous pak, size 85
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 30
88 10 00 0B BC 16 65 96 9B 00 88 63 11 19 00 00
00 33 01 03 00 08 0C 00 00 01 00 00 04 A3 01 02
00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73 2D 62
61 73 2D 42 32 32 36 45 ...
Jan 6 14:51:26.353: [0]PPPoE 0: O PADT R:0000.0000.0000 L:0000.0000.0000 0/38 ATM0.1
contiguous pak, size 74
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 00 00
00 00 00 00 00 00 00 00 00 00 88 63 11 A7 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 ...
Jan 6 14:51:46.576: pppoe_send_padi:
contiguous pak, size 74
00 01 09 00 AA AA 03 00 80 C2 00 07 00 00 FF FF
FF FF FF FF BC 16 65 96 9B 00 88 63 11 09 00 00
00 10 01 01 00 00 01 03 00 08 0C 00 00 01 00 00
04 A3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 ...
Jan 6 14:51:46.608: PPPoE 0: I PADO R:0030.8810.000b L:bc16.6596.9b00 0/38 ATM0.1
contiguous pak, size 71
BC 16 65 96 9B 00 00 30 88 10 00 0B 88 63 11 07
00 00 00 33 01 03 00 08 0C 00 00 01 00 00 04 A3
01 02 00 1F 62 72 61 73 2D 72 65 64 37 2E 6C 73
2D 62 61 73 2D 42 32 32 36 45 34 37 30 39 45 30
31 34 5A 01 01 00 00
Provider wouldn't have bumped us from ADSL to VDSL - but here's the output of show controller vdsl 0:
Controller VDSL 0 is UP
Daemon Status: Up
XTU-R (DS) XTU-C (US)
Chip Vendor ID: 'BDCM' 'IFTN'
Chip Vendor Specific: 0x0000 0x71C8
Chip Vendor Country: 0xB500 0xB500
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x4602 0x0000
Modem Vendor Country: 0xB500 0x0000
Serial Number Near: FCZ1111C08V C887VAG 15.2(4)M
Serial Number Far:
Modem Version Near: 15.2(4)M
Modem Version Far: 0x71c8
Modem Status: TC Sync (Showtime!)
DSL Config Mode: AUTO
Trained Mode: G.992.1 (ADSL) Annex A
TC Mode: ATM
Selftest Result: 0x00
DELT configuration: disabled
DELT state: not running
Trellis: ON ON
SRA: disabled disabled
SRA count: 0 0
Bit swap: enabled enabled
Bit swap count: 1 8
Line Attenuation: 54.5 dB 31.5 dB
Signal Attenuation: 54.5 dB 0.0 dB
Noise Margin: 6.7 dB 11.0 dB
Attainable Rate: 2132 kbits/s 888 kbits/s
Actual Power: 16.7 dBm 12.7 dBm
Total FECC: 546 0
Total ES: 6 0
Total SES: 0 0
Total LOSS: 0 0
Total UAS: 486 486
Total LPRS: 0 0
Total LOFS: 0 0
Total LOLS: 0 0
Full inits: 14
Failed full inits: 1
Short inits: 0
Failed short inits: 1
Firmware Source File Name (version)
VDSL user config flash:vdsl.bin-A2pv6C035d_d23j (10)
Modem FW Version: 110802_1752-4.02L.03.A2pv6C035d.d23j
Modem PHY Version: A2pv6C035d.d23j
Vendor Version:
DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 1664 0 704
SRA Previous Speed: 0 0 0 0
Previous Speed: 0 1600 0 736
Total Cells: 0 2786872 0 0
User Cells: 0 68 0 0
Reed-Solomon EC: 0 546 0 0
CRC Errors: 0 9 0 0
Header Errors: 0 10 0 0
Interleave (ms): 0.00 8.00 0.00 8.00
Actual INP: 0.00 1.12 0.00 1.28
Training Log : Stopped
Training Log Filename : flash:vdsllog.bin
And here's the output from the ATM and dialer interfaces:
interface ATM0
no ip address
ip flow ingress
no atm ilmi-keepalive
end
interface ATM0.1 point-to-point
ip flow ingress
pvc 0/38
pppoe-client dial-pool-number 2
end
interface Dialer2
description OUTSIDE
ip address negotiated
ip access-group firewall in
ip mtu 1492
ip flow ingress
ip nat outside
ip inspect DEFAULT100 out
ip virtual-reassembly in
encapsulation ppp
dialer pool 2
dialer-group 2
ppp authentication chap callin
ppp chap hostname ###removed###
ppp chap password ###removed###
no cdp enable
crypto map dcvpn
end
As I say though, config-wise, everything should be correct - the same router works fine on another line (which should also confirm the authentication details are correct - at least in as far as it matches what the ISP have on their RADIUS)
Any further thoughts?

Problems with pop mail password with iPhone

I have recently purchased an iPhone and after configuring my email POP account using iTunes to do so on my iPhone, I have begun getting a password request for my incoming mail on my macbook. It seems there is a conflict and continues to ask for it sometimes 10 or 15 time in a row without being able to connect to my email on my mac. What should I do?

POP3 accounts aren't really designed for being accessed from multiple devices at the same time. Some POP3 email providers lock the account while another device is accessing it, which may be why your Mac is asking for the password.
Set the account up as IMAP on both the Mac and iPhone and it should work fine. You'll also have the added benefit of your email being completely in sync on both devices, so when you read email on the iPhone it is also marked as read on the Mac and vice versa, and sent mail on one device appears in the Sent Mailbox on the other.

Pop-up LOV - Internal Server Error

I have a pop-up LOV with the query as below:
select distinct a1 d, a1 r
from temp
where ((:P10111_X1 = 2 or :P10111 is null) or
(:P10111_X1 = 1
and (col1 like :P10111_col1 or :P10111_col1 is null)
and (col2 like :P10111_col2 or :P10111_col2 is null)
and (col3 like :P10111_col3 or :P10111_col3 is null)
and (col4 like :P10111_col4 or :P10111_col4 is null)
and (col5 like :P10111_col5 or :P10111_col5 is null)
and (col6 like :P10111_col6 or :P10111_col6 is null)
and (col7 like :P10111_col7 or :P10111_col7 is null)
and (col8 like :P10111_col8 or :P10111_col8 is null)
and (col9 like :P10111_col9 or :P10111_col9 is null)
and (col10 like :P10111_col10 or :P10111_col10 is null)
and (col11 like :P10111_col11 or :P10111_col11 is null)
and (col12 like :P10111_col12 or :P10111_col12 is null)
and (col13 like :P10111_col13 or :P10111_col13 is null)
and (col14 like :P10111_col14 or :P10111_col14 is null)
and (col15 like :P10111_col15 or :P10111_col15 is null)
and (col16 like :P10111_col16 or :P10111_col16 is null)
and (col17 like :P10111_col17 or :P10111_col17 is null)
and (col18 like :P10111_col18 or :P10111_col18 like '3')
and (col19 like :P10111_col19 or :P10111_col19 like '3')
and (col20 like :P10111_col20 or :P10111_col20 like '3')
and (col21 like :P10111_col21 or :P10111_col21 like '3')
and (col22 like :P10111_col22 or :P10111_col22 like '3')
and (col23 like :P10111_col23 or :P10111_col23 like '3')
and (col24 like :P10111_col24 or :P10111_col24 like '3')
and (col25 like :P10111_col25 or :P10111_col25 like '3')
and (col26 like :P10111_col26 or :P10111_col26 like '3')
and (col27 like :P10111_col27 or :P10111_col27 like '3')
and (col28 like :P10111_col28 or :P10111_col28 like '3')
and (col29 like :P10111_col29 or :P10111_col29 like '3')))
order by col1;
The query is fine and works properly.
But when i try to open the POP-UP window, instead of displaying the List of values it gives a message "Internal Server Error" .
The error on the error log at the server is as belows:
[Fri Aug 11 14:46:04 2006] [error] [client 192.162.1.173] [ecid: 1155287764:192.162.1.227:5037:0:3454,0] mod_plsql: /pls/ilclpdv3/wwv_flow_utilities.gen_popup_list HTTP-500 ORA-02005: implicit (-1) length not valid for this bind or define datatype
When I remove any 3 'AND' conditions from the where clause it works properly.
I hope its with the size of the LOV query.
is there aany way to overcome it.
Thanks
Ameya.

Ameya - That is correct. You may have to call a function from within the query to shorten it. The function can refer to the page items using v('ITEM') notation. In APEX 2.2, the popup LOV implementation has been improved somewhat so that this kind of thing should not occur.
Scott

Strange issue when scaling text

Hi,
I'm using inDesign CS6 and there's a strange issue when rescaling a text with overflow to 200%:
As you can see, the fourth paragraph doesn't change its font size, even if it has exactly the same configuration. This happens apparently randomly to some paragraphs, or even lines of a paragraph in some cases.
The weirdest thing is that I have tried the same action with the same .indd file in other computers (another Mac and a Windows one, both CS6) and it scales properly all paragraphs. So I checked all the preferences from one computer to the other, and even if they are the same, the scaling issue still happens.
Any hints?

See Replace Your Preferences

Displaying item value on basis of pop up lov value

Hi ,
I have created a form on which i have a pop up lov item whose values are getting displayed on basis of a table column.Now my requirement is that when a user select a value(for ex: say an code i.e 123) from pop up lov then on basis of this value an another value pops up which shows the description related to this code.I have this description in another column of same table from which i have displayed pop up lov values.
I tried to implement this by creating a display only item on form and taking source value of this item from sql query returning single value as code is primary key but I am unable to fetch value.I have written the following query:
select model_code from BL_VEHICLE_ENGINE_NAME where catalog_code=:p9_catalog_code
Here p9_catalog_code is the item displaying pop up lov.
when i am specifying a particular value rather than bind value as (select model_code from BL_VEHICLE_ENGINE_NAME where catalog_code=123) then the description corresponding to this value is getting displayed through display only item.
How can i fetch value from pop up lov and utilize that value to display required description.Is displaying description through display only item correct or is there any other way around through which this description could be displayed more effectively.
Thanks
Abhi

Hi Abhi,
Instead of pop up lov you can use cascade lov ie when u have data like say if u select code from ur table 123 and it has more than one description then u can use cascade lov it will query upon the first lov what u required.
Or coming to ur problem
for code pageitem say p1_code u are using pop lov (you can try select list instead of pop up lov )
and for description u r using display column.
and give the source as return single query only
select descp from table where code=:P1code.
Hopes this helps you
Thanks & Regards
Srikkanth.M

Strange issue with left mouse clicking freezing other inputs on the Mac

I'm having a strange issue with my game. I'm using Flash CS6 and a Mac.
I've got a character that I move around the screen with keys, and you can click the left mouse button to make him throw something. The weird issue is when I click the left mouse button a lot, it seems to stop any other inputs from coming in, so for example, if I hold the right arrow key down while I'm doing a left clicking, and then let go of the right arrow key, the character will keep on moving right for a few seconds, until it finally get's the key_up event and stops.
Even not using any mouse event handlers, so the mouse is doing nothing in the game still causes the key inputs to be delayed just by left clicking, any ideas?
I've just tested the .swf on a PC and there was no problem, the mouse clicking was not causing any issues, so it's something peculiar to the Mac.

Hi,
This could be an issue if you were using Safari 5.1+ in 64bit mode. This should go away if you run Safari 5.1+ in 32 bit mode. You can change this by
1. Go to /Applications
2. Find Safari->RightClick->Get Info->Check 'Open in 32-bit mode' check box.
3. Relaunch Safari 5.1 again.
Thanks!
Mohan

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Strange issue with RAM upgrade: It works but it doesn't! Please help.

Hello Everyone,
I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
Many thanks in advance.

I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
Thanks again. Very much appreciated.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source. What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
Some other information:
- Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
- If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
- The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
Any information would be great – am I missing something here, or is this genuinely weird?

Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
Here's what I did to test:
Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured. I transferred onto their machines, hooked up my Sony D8, and attempted to play the video. It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop). I even tried changing each machine's firewire driver to the legacy one and same results. I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver. Very annoying. I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
I have 2 other things I can try:
1. Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
2. Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/). I can't do it with my Home edition apparantly.
Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
Tim

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Strange issue with POF: byte array with the value 94

This is a somewhat strange issue we’ve managed to reduce to this test case. We’ve also seen similar issues with chars and shorts as well. It’s only a problem if the byte value inside the byte array is equal to 94! A value of 93, 95, etc, seems to be ok.
Given the below class, the byte values both in the array and the single byte value are wrong when deserializing. The value inside the byte array isn’t what we put in (get [75] instead of [94]) and the single byte value is null (not 114).
Pof object code:
package com.test;
import java.io.IOException;
import java.util.Arrays;
import com.tangosol.io.pof.PofReader;
import com.tangosol.io.pof.PofWriter;
import com.tangosol.io.pof.PortableObject;
public class PofObject1 implements PortableObject {
     private byte[] byteArray;
     private byte byteValue;
     public void setValues() {
          byteArray = new byte[] {94};
          byteValue = 114;
     @Override
     public void readExternal(PofReader reader) throws IOException {
          Object byteArray = reader.readObjectArray(0, null);
          Object byteValue = reader.readObject(1);
          System.out.println(Arrays.toString((Object[])byteArray));
          System.out.println(byteValue);
          if (byteValue == null) throw new IOException("byteValue is null!");
     @Override
     public void writeExternal(PofWriter writer) throws IOException {
          writer.writeObject(0, byteArray);
          writer.writeObject(1, byteValue);
Using writer.writeObjectArray(0, byteArray); instead of writer.writeObject(0, byteArray); doesn't help. In this case byteArray would be of type Object[] (as accessed through reflection).
This is simply put in to a distributed cache and then fetched back. No EPs, listeners or stuff like that involved:
     public static void main(String... args) throws Exception {
          NamedCache cache = CacheFactory.getCache("my-cache");
          PofObject1 o = new PofObject1();
          o.setValues();
          cache.put("key1", o);
          cache.get("key1");
Only tried it with Coherecne 3.7.1.3.
Cache config file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>my-cache</cache-name>
               <scheme-name>my-cache</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <distributed-scheme>
               <scheme-name>my-cache</scheme-name>
               <service-name>my-cache</service-name>
               <serializer>
                    <class-name>
                         com.tangosol.io.pof.ConfigurablePofContext
                    </class-name>
                    <init-params>
                         <init-param>
                              <param-type>string</param-type>
                              <param-value>pof-config.xml</param-value>
                         </init-param>
                    </init-params>
               </serializer>
               <lease-granularity>thread</lease-granularity>
               <thread-count>10</thread-count>
               <backing-map-scheme>
                    <local-scheme>
                    </local-scheme>
               </backing-map-scheme>
               <autostart>true</autostart>
          </distributed-scheme>
     </caching-schemes>
</cache-config>
POF config file:
<?xml version="1.0"?>
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
     xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config coherence-pof-config.xsd">
     <user-type-list>
          
          <include>coherence-pof-config.xml</include>
          <user-type>
               <type-id>1460</type-id>
               <class-name>com.test.PofObject1</class-name>
          </user-type>
     </user-type-list>
</pof-config>

Hi,
POF uses certain byte values as an optimization to represent well known values of certain Object types - e.g. boolean True and False, some very small numbers, null etc... When you do read/write Object instead of using the correct method I suspect POF gets confused over the type and value that the field should be.
There are a number of cases where POF does not know what the type is - Numbers would be one of these, for example if I stored a long of value 10 on deserialization POF would not know if that was an int, long double etc... so you have to use the correct method to get it back. Collections are another - If you serialize a Set all POF knows is that you have serialized some sort of Collection so unless you are specific when deserializing you will get back a List.
JK

Strange Issue with Pop-up LOV with key value return

Similar Messages

Maybe you are looking for