Strange Mail behavior

OK, this just started yesterday:
I can enter ONE (1) addressee for a new email message. If I want to add another name (Boba...), this is what I get:
BBoBobBobbBobbaBobbaBobba
If I touch the delete key, I just get another "Bobba." If I highlight the whole mess and delete, it leaves me with the first 5 letters: BBoBO which I cannot delete.
I am stuck sending one email at a time (when I want multiple addressees).
I have reset permissions and restarted computer. I have deleted all addresses from Address book and restored them from 3 days ago.
How can I shut off this auto-type feature that produces this garbage--also, how can I delete this stuff?
Or, how can I save my mailboxes and then how can I reinstall just Mail?

Still need help. Since posting the original question, I think the basis of the problem is in Address Book. I used the Optional Installs from the Leopard DVD today to reinstall (update) just the Address Book. This did not help. Here is my problem in Address Book (similar to problem in Mail of my earlier post):
If I want to add a new address, for name (First), I start to type Nancy, but what I get is "Naaaa";
each time I touch delete, I get a whole bunch more Na characters.
So in Mail, I can use it if I have only 1 address. If I want a second address, I get into this repeating mode and have to trash the email and start over with only 1 address.

Similar Messages

Strange Mail Behavior when cicking reply to

I am having a very different but very strange behavior when in mail 5.2 I click on reply or forward in my menu bar a new mail window opens up and quickly moves off to the right of the screen and disappears laving my inbox. I cannot find where they are going and the only way I can respond is open the mail in a new window. This is weird I have been using mail forever and never seen this before?
any suggestions???
mac os 10.7.4
Thanks for any suggestions

So Mail doesn’t really crash (i.e. quit unexpectedly). Rather, it freezes (i.e. becomes unresponsive), right?
What type of mail account is this (POP, IMAP, .Mac)?
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Try disabling Search .Mac For Certificates in Keychain Access > Preferences if it’s enabled. Take a look at the following articles for an explanation of why this could be the problem:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither/

Strange Mail behaviors

For the past few months, the first time each day I use Mail to reply to or forward a message, is takes about 15 to 30 seconds of twirling colorwheel before the message window pops up. I get a similar delay the first time I try to attach a file.
What might be my problem?

Is your profile accurate? Does this happen on a PowerPC-based Mac?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Drafts settings?
The first release of Safari 3 Beta was known to cause this problem in Mail as well, so be sure you either don’t have that installed or install the latest version.

Super Strange Mail Behaviors

For the whole day I've been trying to send one piece of email. The problems I have encountered have been numerous, but above the most troublesome were:
In an attemt to send a flyer as a pdf attachement I received a message saying the content was over the 10mb limit. So I then archived the flyer and sent it as a zip pdf file. It was at that point that I started experiences problems sending the email - application problems. The mail didn't send immediately, it went to the outbox and sat there for over 15 minutes. As you can imagine I was very impatient and deleted the outgoing email to resend it. Still it went to the outbox. So I sent another duplicate email to a mac email address to see if the problem was with the receipient and the same thing happened. It was only after 30 mins it showed up in the mac receipients mailbox. My problem has been with the vast amount of time it takes for email to be sent. Also not all mail sent, that I know for sure has been received, comes to my sent mailbox. While having the sending difficulties I also experiened a disapperance of all mail content in my inbox, outbox and sent box. I'd quit the application and only after 30secs to a minute did everything upload. My last problem has to do with trying to open the mail application and quitting it. I could click on the mail icon with the mouse and the icon would become animated then settle as the gray "application open" arrow indicator would appear. However the mail viewer wouldn't open. Clicking, and reclicking on the icon doesn't do a thing. Also I couldn't quit the application because he quit mail selection under the file heading would be gray and not black. I would then try to restart the computer via the apple menu and would come back with an alert saying mail failed to close. I tried to shut down the comuter as well the same way and received a similar message. My only saving grace was pushing the fail safe power down button. I turned the comuter back on and the application started up after selecting it but the last email I sent was still in the outbox - from one hour before.
The only culprit I can suspect is the new apple router - Apple Extreme - that I just installed one week ago. I am able to receive a connection via my comcast broadband service. I have one PC w/o wireless capabalities hooked up that is able to access the internet and email via the ethernet cable and my two macbook pros recognize an apple network, although I haven't set one up. However the connection may not be complete because the light is blinking amber instead of a solid green and the rate of connection and uploading websites/links aren't super fast. I'm not sure how to fix this problem.
Any help anyone can offer would be greatly appreciated.

Is your profile accurate? Does this happen on a PowerPC-based Mac?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Drafts settings?
The first release of Safari 3 Beta was known to cause this problem in Mail as well, so be sure you either don’t have that installed or install the latest version.

Capturing DVCAM in FCP 6.0.2 and encountering strange capture behavior

I have FCP 6.0.2 and OSX 10.5.2 and QT 7.3.1. I have been capturing several DVCAM cassettes using my Sony DSR-20 deck. Although I have done this countless times before in earlier versions of FCP, I am encountering some strange repetitive behavior. I am capturing 30 minute clips one at a time. When I use batch capture it will cue the tape up properly to the in point...and then start capturing until it gets to about 10-12 minutes in, and then capture unexpectedly stops, no dialogue box, the tape rewinds and starts capturing again from the original in point. On this second capture, the tape sails past the 10 minute mark and keeps going to the end of the 30 minute clip. It then stops, gives me the dialogue box that it has successfully captured. And it has.
But every DVCAM tape I captured today exhibited the same behavior. Capture would be successful until about about 10 minutes in, then FCP aborts (no dropped frame message, no dialogue box) rewinds the tape back to the in point, tries again, and this time succeeds with the second pass capturing the entire clip. Note at the 10 minute mark there is no scene change or no camera start/stop.
Have other users experienced this issue? And if so, is there a workaround or a possible patch forthcoming from FCP?
Many thanks,
John

Yes, each tape has an in and out point defined. In my 6 years of editing with Final Cut and DVCAM tapes I've never encountered this issue before in the capturing process until now. I will have to see in future weeks with other captures whether this is an on-going issue or not, but at least I can capture for now.

Bug in my code or strange memory behavior ?

Hi, Guys !
It's been a while since I post something in this forum - trying to use your help when it's really needed.
So, here we go ...
(we use Oracle 8.1.7 on Unix box and SQL * Plus 8.1.6)
While back I wrote "core" PL/SQL package that resides in let's say DB1 database. It has RECORD_EXISTS_FNC function designed to dynamically check If the record exists in certain table/view. Assumptions are that you pass in :
Table/View name, Column name, and unique numeric value (because by DBA rules all of our Tables have SEQUENCE as a Primary Key. And I plan soon to put in overloaded function to accept unique character value)
Also every Table has SYS_TIME_STAMP and SYS_UPDATE_SEQuence columns that populated by Trigger before Insert/Update representing Last Update time_stamp
and how many times record was updated within same second.
(in case more than one User updates same record in same time - that was written before Oracle had more granular date/time). So function has SYS_TIME_STAMP and SYS_UPDATE_SEQUENCE parameters (optional) accordingly.
And It looks something like :
FUNCTION RECORD_EXISTS_FNC
(iBV_NAME IN USER_VIEWS.VIEW_NAME%TYPE,
iPK_FIELD IN USER_TAB_COLUMNS.COLUMN_NAME%TYPE,
iPK_VALUE IN NUMBER,
iSYS_TIME_STAMP IN DATE DEFAULT NULL,
iSYS_UPDATE_SEQ IN NUMBER DEFAULT NULL) RETURN BOOLEAN IS
TYPE REF_CUR IS REF CURSOR;
CR REF_CUR;
i PLS_INTEGER DEFAULT 0;
vRESULT BOOLEAN DEFAULT FALSE;
vQUERY USER_SOURCE.TEXT%TYPE;
BEGIN
vQUERY := 'SELECT 1 FROM ' || iBV_NAME || ' WHERE ' || iPK_FIELD || ' = ' || iPK_VALUE;
IF iSYS_TIME_STAMP IS NOT NULL AND iSYS_UPDATE_SEQ IS NOT NULL THEN
vQUERY := vQUERY || ' AND SYS_TIME_STAMP = TO_DATE (''' || iSYS_TIME_STAMP || ''')
AND SYS_UPDATE_SEQ = ' || iSYS_UPDATE_SEQ;
END IF;
IF iBV_NAME IS NOT NULL AND
iPK_FIELD IS NOT NULL AND
iPK_VALUE IS NOT NULL THEN
OPEN CR FOR vQUERY;
FETCH CR INTO i;
vRESULT := CR%FOUND;
CLOSE CR;
END IF;
RETURN vRESULT;
EXCEPTION
WHEN OTHERS THEN
IF CR%ISOPEN THEN
CLOSE CR;
END IF;
INSERT_ERROR_LOG_PRC ('CORE_PKG', 'ORACLE', SQLCODE, SQLERRM, 'RECORD_EXISTS_FNC');
RETURN vRESULT;
END RECORD_EXISTS_FNC;
So the problem is when I call this function from let's say
database DB2 (via db remote link and synonym) and I know exactly that record does exists (because I am selecting those SYS fields before pass them in) - I get the correct result TRUE. The other programmer (Patrick) calls this function within same DB2 database, within same UserID/password (obviously different session), running exactly the same testing code and gets result FALSE (record doesn't exist, but it does !) He tried to Logoff/Login again several times within several days and try to run it and still was getting FALSE !
I tried to Logoff/Login again and I was getting mostly TRUE and sometimes FALSE too !!!
I thought may be It has something to do with REF CURSOR that I use to build SQL on the fly, so I changed to NDS
using EXECUTE IMMEDIATE statement - nothing changed.
vQUERY := 'SELECT COUNT (1) FROM ' || iBV_NAME || ' WHERE ' || iPK_FIELD || ' = ' || iPK_VALUE;
IF iSYS_TIME_STAMP IS NOT NULL AND iSYS_UPDATE_SEQ IS NOT NULL THEN
vQUERY := vQUERY || ' AND SYS_TIME_STAMP = TO_DATE (''' || iSYS_TIME_STAMP || ''') AND SYS_UPDATE_SEQ = ' || iSYS_UPDATE_SEQ;
END IF;
EXECUTE IMMEDIATE vQUERY INTO i;
vRESULT := NOT (i = 0);
RETURN vRESULT;
Interesting note : when Patrick doesn't pass SYS parameters (Time_stamp, Update_sequence), or passes NULLs - function always finds the record ! (Statement 2 below)
May be it has to do with the way TO_DATE () function gets parsed in that dynamic SQL - I don't know ...
Here's the test code :
SET SERVEROUTPUT ON;
DECLARE
SYS_TIME DATE;
SYS_SEQ NUMBER;
bEXISTS BOOLEAN DEFAULT FALSE;
BEGIN
SELECT SYS_TIME_STAMP, SYS_UPDATE_SEQ INTO SYS_TIME, SYS_SEQ FROM LOCATION_BV WHERE PK = 1;
bEXISTS := CORE_PKG.RECORD_EXISTS_FNC ('LOCATION_BV','PK',1, SYS_TIME, SYS_SEQ); -- STATEMENT 1
--bEXISTS := CORE_PKG.RECORD_EXISTS_FNC ('LOCATION_BV','PK',1, NULL, NULL); -- STATEMENT 2
IF bEXISTS THEN
DBMS_OUTPUT.PUT_LINE ('TRUE');
ELSE
DBMS_OUTPUT.PUT_LINE ('FALSE');
END IF;
END;
I asked our DBA, he has no clue about this strange inconsistent results.
I debugged line by line, extracted that generated SQL and ran it in same account - works fine !
Does anyone knows or have clues or can help what's going on ???
I don't know If this is bug in my code or strange memory behavior ?
(Please let me know If anything unclear)
Thanx a lot for your help and time !
Steve K.

see your other thread
Bug in my code or strange memory behavior ?

Odd Junk Mail Behavior

I've been experiencing odd Junk Mail behavior on my Mac; I've got the Mail app set so it puts the emails it thinks is Junk in the Junk folder. I do this because I've noticed that certain legitimate emails keep ending up in the Junk folder automatically.
I've also noticed that some of the emails in the Junk folder have not actually been flagged as Junk Mail, they were not colored brown by the Junk Mail rule and there is no button available to tell Mail it's not Junk. How do I stop Mail from flagging something as Junk when it doesn't seem to tag it as Junk but it still ends up in the Junk folder?
I see emails tagged as Junk in the Junk folder that are legit, so I click the "Not Junk" button and move them back to the proper mail folder. But the next time I get mail from the same source, it gets flagged and tagged as Junk again. I thought the Mail app learns from the training we give it. How do I resolve this situation?
I've already set the Junk filtering to not filter emails from recipients who are in my Address Book.

Either you’ve messed with the Preferences > Junk Mail > Advanced settings, or those settings have become corrupt, or you have one or more rules that have a bearing on this.
Assuming it isn’t the latter, try this:
1. Go to Preferences > Junk Mail, disable junk mail filtering, then enable it again. This resets the rule that governs what the junk filter does.
2. Choose either Training or Automatic mode (it doesn’t matter) and leave the other options checked. Click Advanced to see how the junk filter rule is defined now if you want, but don’t touch anything there.
3. Reset the junk filter database (Preferences > Junk Mail > Reset).

Strange Permissions Behavior with Public/Private Drop Box

Strange Permissions Behavior with Non-Course Drop Box
In an effort to promote iTunes U on campus this semester (and to get people working with audio and video more) we're having a contest in which people can submit personal or group audio/video projects.
This being an iTunes promo, we intend for students to submit their contributions via a drop box.
To that end, I began experimenting with drop boxes in iTunes U, which I haven't done much of previously. I've created a course called "iTunes U Drop Box Test" under "Campus Events". Within that, I have two tabs: "Featured Submissions" and "Dropbox". My goal with this drop box was to allow faculty, students and college folks the ability to use the drop box ("college" being a role I've defined for those who don't fit into the faculty/student roles).
When I first started experimenting, access to the "iTunes U Drop Box Test" course looked like this:
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
Download: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
Download: All@urn:mace:itunesu.com:sites:lafayette.edu
--- Credentials ----
Download: College@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu
Download: Instructor@urn:mace:lafayette.edu:classes:${IDENTIFIER}
Download: Student@urn:mace:lafayette.edu
Download: Student@urn:mace:lafayette.edu:classes:${IDENTIFIER}
For the "Featured" Submissions tab, I gave the non-system credentials the "download" right, and for the "Dropbox" tab I gave the non-system credentials the "dropbox" right.
My understanding of this setup is that everyone should have had the ability to view the course and the contents of the "Featured Submissions" tab and that those in the College/Instructor/Student roles would be able to upload files via the "Dropbox" tab ... but not see the contents of said tab after the files were uploaded (aside from any files they uploaded themselves).
This is not the behavior we saw however. While the College/Instructor/Student roles could upload files to the dropbox, everyone (including the unauthenticated public) was able to see all of the contents of the dropbox.
The only way I could get this to work as advertised was to change all of the system credentials save the "Administrator" to "No Access":
--- Credentials (System) ---
Edit: Administrator@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Authenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: Unauthenticated@urn:mace:itunesu.com:sites:lafayette.edu
No Access: All@urn:mace:itunesu.com:sites:lafayette.edu
Once I did this, everything worked as advertised: College/Instructor/Student roles could upload tracks, and the "Dropbox" tab would only display tracks they uploaded.
So my question is ... is this the correct behavior for the drop box? It looks like when the system credentials are in play, they're simply overriding whatever the normal "view" rule is for the drop box, which doesn't seem right.

Your current configuration where things work as you wanted does seem correct to me. You are not using any System Credentials to accomplish the functionality and that's fine.
Here's some more info to clarify how / why this is working for you and why you had to set "No Access" for the System Credentials:
The System Credential "Authenticated@..." is going to get assigned to any user that goes through your transfer script. Even if you transfer script assigns no credentials to a user, upon entering iTunes U they will have at least 1 - the "Authenticated@..." credential. Therefore, unless you block access using "No Access", any user that passes through your transfer script is going to be able to access the area in question.
When you change values for "Unauthenticated@..." or "All@..." you are defining what someone that DOES NOT pass through your transfer script can do. You want both of those to be "No Access" at the top level of your site if you do not want unauthenticated visitors.
The distinction between "Unauthenticated" and "All" is that "All" applies to all users whether they pass through the transfer script or not.
Here's another way to remember things:
User passes through your transfer script, iTunes U automatically assigns:
Authenticated@....
All@....
User does not pass through your transfer script and instead access your iTunes U site through derivable URL*, they get assigned:
Unauthenticated@....
All@....
*The derivable URL for a site is: http://deimos.apple.com/WebObjects/Core.woa/Browse/site-domain-name
Mac OS X (10.4.6)

How can i cancel a strange mail?

How can i cancel a strange mail that arrived to me? It is empty without object. The mail program doesn't permit mebto cancel and to move it.

Just in case the email is bona fide but there has been a malfunction it is worth doing a Reset first. [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
If there is no change then just try to delete it. The reset should enable this to be done.

Strange XSLT Behavior: xsl:template match

Hello I found the following strange XSLT behavior when using xsl:template. I only want to read the content of the element /Source/Surname/Details. Therefore I match this path using xsl:template match.
What is strange that in the target message also the value of the Element LastName is written at the end. Please see example below. This is just a short example to point out the problem. I have a bigger message structure where I have to match a similar path. How can I avoid the the value of the FullDetails is just written at the end (not even beeing in an element)? I would have expected that the path is only matched once and the instructions then executed without <LastName> beeing even touched.I used XML Spy for this test.
Here is an example:
Source message:
<?xml version="1.0" encoding="UTF-8"?>
<Source>
     <Surname>
          <Details>MyFirstName</Details>
     </Surname>
     <LastName>
          <FullDetails> MyLastName </FullDetails>
     </LastName>
</Source>
XSLT
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/Source/Surname">
<PORR>
<Name><xsl:value-of select="Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Target Message
<?xml version="1.0" encoding="UTF-8"?>
<PORR xmlns:fo="http://www.w3.org/1999/XSL/Format">
<Name>MyFirstName</Name></PORR>MyLastName
Edited by: Florian Guppenberger on Oct 8, 2009 4:35 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:36 AM
Edited by: Florian Guppenberger on Oct 8, 2009 4:37 AM

Hi,
I am not sure why your XSLT behaving like that,please try this XSL,what i did chnages is Templete match /*,I given exact path in Value of select,.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/*">
<PORR>
<Name><xsl:value-of select="/Source/Surname/Details"/></Name>
</PORR>
</xsl:template>
</xsl:stylesheet>
Regards,
Raj

Strange typeover behavior in Newsfeeds

I am getting this strange intermittent behavior when create a post in the Newsfeed.
As you begin to type the text compress and it almost looks like the letters are typing over themselves
The resulting text can be posted and looks fine when posted, it some times does throw an error but the error and type over don't seem connected
It happens on all browser types and even phones and tablets

Hi,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Mail behavior

I've been experiencing some rather weird Mail behavior for the longest with the following issues, so i'm trying to finally resolve.
1)Drafts - i'm noticing that composed messages that autosave as drafts during composition remain in the drafts folder even after I send them, (unless I manually go into the drafts folder and delete them). I've noticed this across all 3 accounts i have configured in Mail (2 Gmail, one GoDaddy, all IMAP)
2) Sent items with larger attachments - i've noticed this mostly on my GoDaddy accounts, sent emails that contain larger attachments will kick back to me as Recovered Items, despite them being successfully sent to email recipients. Additionally these emails rarely copy over to my sent items folder, however if I send an email with no attachment those have no problem copying over.
I always dismissed this as just some of the limitations of the Mail app, but perhaps there are some ways to fix these issues.
Any suggestions?

just double checking. still experiencing these issues, and they are quite annoying.

Strange ZWSREG behavior

We are in the middle of a rollout of about 300 new machines. (used sysprep in the image) The first 100 are doing something strange. They boot up get renamed and join the windows domain with their new name, but register with ZEN as the randomly generated Microsoft name. (usually someting like N-398477634379d979) I deleted the workstation object, unreged and rereged the computer, but it always reregisters with the randomly generated name. What gives? I found a TID that said this was fixed by an update on the latest desktop agent, but that I could work around it by deleting the incorrectly named object and waiting for the machine to reboot, However it still registers with the wrong name. Any ideas? Thanks.
J. Daniel Treadwell

But these are new computers. They should not have image safe data yet. I tried it, but got the same result.
Originally Posted by Craig Wilson
Try running ZISWIN -R when you unregister.
My guess is that it's pulling the old info from Image Safe Data.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"jtreadwell" <[email protected]> wrote in message
news:[email protected]..
>
> We are in the middle of a rollout of about 300 new machines. (used
> sysprep in the image) The first 100 are doing something strange. They
> boot up get renamed and join the windows domain with their new name,
> but register with ZEN as the randomly generated Microsoft name.
> (usually someting like N-398477634379d979) I deleted the workstation
> object, unreged and rereged the computer, but it always reregisters
> with the randomly generated name. What gives? I found a TID that said
> this was fixed by an update on the latest desktop agent, but that I
> could work around it by deleting the incorrectly named object and
> waiting for the machine to reboot, However it still registers with the
> wrong name. Any ideas? Thanks.
>
>
> J. Daniel Treadwell
>
>
> --
> jtreadwell
> ------------------------------------------------------------------------
> jtreadwell's Profile: NOVELL FORUMS - View Profile: jtreadwell
> View this thread: Strange ZWSREG behavior - NOVELL FORUMS
>

Strange e-mail Behavior

I have been experiencing a strange phenomenon with my Mail account, the nature of which is as follows. Whenever, I send an e-mail via my mail account using my Hotmail account the recipient gets the message, however, it states that the e-mail is coming from my wife’s Hotmail account instead of mine. It should be noted that the only similarity in both e-mail accounts is that they are Hotmail accounts. Any suggestion on what could be causing this strange phenomenon and how I can resolve same will be greatly appreciated.

Hello, do you & her share the same computer account?
Check Mail Preferences>Composing>Send messages from, & see if it's set to Send new messages from Last viewed account, or hers.

Strange Mail/Gmail trash behavior - syncing trash

I'm using Apple Mail (2.1.3) with Gmail (IMAP) with my Mailbox Behaviors set: Store drafts on server (checked) Store sent (unchecked) Store junk (checked) Move deleted messages to Trash (checked) Store deleted messages on server (unchecked).
I'd like to have my Trash in Mail synced with Trash in Gmail but I can't seem to make this happen. All that appears in my Gmail trash when I composed/send/receive/delete email in Mail is many iterations of any email I compose. What seems to be happening is when I compose email in Mail, a snapshot of the draft is placed in my Gmail Trash folder periodically. If I spend 30 minutes composing an email, I will end up with 10-15 snapshots of the draft taken periodically while I was writing the email.
I've tried a variety of combinations of Mail preferences with no change in this behavior. Anyone have any ideas? I don't really mind the snapshotting, but I would like to sync the two Trash folders if possible.
Also, what is the difference between the Trash folder and Deleted Messages folder in Mail? When I check "Store deleted messages on server" in Mail preferences, a Deleted Messages folder appears in Mail and acts like Trash used to (it receives deleted messages and the old Trash folder stays empty). Neither one is synced with the Gmail trash folder...
Thanks for any help!

I've been playing with this also lately and being new to both Gmail and Apple Mail I agree that it's a little tricky. My only comment is that with regards to Trash and Deleted Messages, "Deleted Messages" appears to be a Gmail label that Apple Mail assigns to messages when you delete them (which also creates a corresponding folder in Apple Mail) - whereas Trash is the official [Gmail]\Trash folder. Due to the redundancy Google recommends NOT checking the "Move deleted messages to Trash".
http://mail.google.com/support/bin/answer.py?answer=78892&topic=12815

Strange Mail behavior

Similar Messages

Maybe you are looking for