Stuttering Motion Effects on NTSC monitor

I'm doing a couple of DV-NTSC projects where I'm making some graphics with Motion. And while everything else looks good played back on my external monitor (FireWire route thru DSR11), any Motion clips I make with the 3D Camera Swerve effect stutters and flickers like crazy. The clips look fine on the computer screen and exported QuickTimes and WMV's also look normal. It's just the analog connection to my professional JVC NTSC monitor that's driving me nuts. Is this something I need to worry about if I have to output to tape as well as a digital file (which of course looks OK also)? If so, what can I do to make the tape output look smooth? The de-interlace and deflicker filters don't help.

Are you talking about output from Motion itself or from a Motion project on your FCP timeline?
Do you still have this problem when you render the clip out of motion and replace the Motion project in your timeline with it's actual rendered output?

Similar Messages

DVDSP output to my NTSC Monitor?

Hey there,
I have a JVC NTSC monitor that is plugged into my AJA Kona LH. I'm having great luck using it with Motion, FCP and After Effects, as the "Output" preferences allow me to choose the Kona and my work shows up on the JVC just like it's supposed to.
Somehow, however, I do not get any option in Preferences within DVD studio pro to output to anything other than the Desktop. I have no Firewire into the JVC, which I think may be part of the issue?
Any ideas how I can do DVD simulations and output them onto my monitor?
Thanks!
Gman

Any ideas how I can do DVD simulations and output them onto my monitor?
Can't be done with Apple's new Desktop Preview thingie... it specifically requires a video card to do it, not an AJA card. It certainly does not show my Aurora Fuse card as an option.
It's not a Firewire issue. With Firewire, you have something (usually a camcorder or DV deck) that serves as the digital/analog converter. If there was a Firewire converter that decoded MPEG2 instead of DV, and if DVDSP supported it, then it would be a Firewire issue.
Basically, to do what you want, you'd need a card that provided hardware MPEG2 decoding. Apple bought Spruce's card that provided that capability when they bought Spruce, but have chosen not to offer it as a product.
The lack of true MPEG2 decoding and previewing on a broadcast monitor is often mentioned as one of the big drawbacks for using a Mac as a pro DVD authoring setup.

Any way to make Motion Effect work in CS3?

I had some problems with animated motion effects in CS2, but now they seem to be even worse in CS3... Along with all the other CS3 problems I've encountered, I'm considering going back to CS2 - but I thought I'd try here first...
With an interlaced video project (NTSC SD) anything (title, photo, or video) that is put in motion using keyframes for the built-in Motion Effect comes out VERY bad.
I tried a test with a clip that is only three frames long, consisting of white box approx. 100x100 pixels (made via Titler) and starting at frame 0, offset horizontally by 360 and at the 3rd frame (frame 2) offset horizontally by 380. (20 pixel shift)
FIRST PROBLEM: Look at the frame 0 and frame 1 in the program monitor at 100%. Now try any other magnification - completely different results!!
SECOND PROBLEM: To export these three frames, I have to set the work area bar to include FOUR frames, because if I animate motion of a clip and then export, the last frame is SOMETIMES not included in the output file. If you're playing along, output five frames just to be sure.
THIRD PROBLEM: Open the clip in Photoshop. (The only application in CS3 that appears to work correctly.) At first glance, frame one appears to be interlaced because of the motion. But it's not. The second field is nowhere near where it should be in time relative to the movement. If you use an actual photo instead of a white box, you can see how badly it's mangled. (Not just fields in wrong position, but badly mangled.)
FOURTH PROBLEM: Frame 1 and 2 (the 2nd and third frame) are also badly mangled.
FIFTH PROBLEM: The fourth frame (frame 3) consists of the the final resting place of the object - BUT IT SHOULDN'T BE THERE AT ALL! (The 4th frame is blank.)
I know, I know, long rant... I'm just getting so fed up with all of the problems with CS3...
Anyway, are there other alternatives that will work on interlaced video??? (For now, I had to create a different project that was progressive, and render to a temp file to import into the interleaved project. It looks better, but not nearly as smooth of motion as it should be.)

Please provide
these details to help us help you.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Editing stills with motion effects, performance questions.

I am editing a video in FCE that consists solely of still photos.
I am creating motion effects (pans and pullbacks, etc) and dissolve
transitions, and overlaying titles. It will be played back on dvd
on a 16:9 monitor (standard dvd,not blueray hi-def). Some questions:
What is the FCE best setup to use for best image quality: DV-NTSC?
DV-NTSC Anamorphic? or is it HDV-1080i or 720p30 even though it
won't be played back as hi-def?
How do best avoid squiggly line problem with pan moves etc?
On my G-5, 2gb RAM, single processor machine I seem to be having
performance problems with playback: slow to render, dropping frames, etc
Thanks for any help!

Excellent summary MacDLS, thanks for the contribution.
A lot of the photos I've taken on my camera are 3072 X 2304 (resolution 314) .jpegs.
I've heard it said that jpegs aren't the best format for Motion, since they're a compressed format.
If you're happy with the jpegs, Motion will be, too.
My typical project could either be 1280 X 720 or SD. I like the photo to be a lot bigger than the
canvas size, so I have room to do crops and grows, and the like. Is there a maximum dimension
that I should be working with?
Yes and no. Your originals are 7,000,000 pixels. Your video working space only displays about 950,000 pixels at any single instant.
At that project size, your stills are almost 700% larger than the frame. This will tax any system as you add more stills. 150% is more realistic in terms of processing overhead and I try to only import HUGE images that I know are going to be tightly cropped by zooming in. You need to understand that an 1300x800 section of your original is as far as you can zoom in , the pixels will be 100% in size. If you zoom in further, all you get are bigger pixels. The trade off you make is that if you zoom way out on your source image, you've thrown away 75% of its content to scale it to fit the video format; you lose much much more if you go to SD.
Finally, the manual says that d.p.i doesn't matter in Motion, so does this mean that it's worth
actually exporting my 300 dpi photos to 72 dpi before working with them in Motion?
Don't confuse DPI with resolution. Your video screen will only show about 900,000 pixels in HD and about 350,000 pixels in SD totally regardless of how many pixels there are in your original.
bogiesan

External NTSC Monitor - 4:3 and 16:9 Question

I'm trying to find a configuration setting in FCP 5.0 when outputting to an external NTSC monitor that will force the image to "letterbox", rather than crop to 4:3.
I have a nice Sony NTSC monitor, but it's not the model that allows switching between 4:3 and 16:9 aspect ratios, unfortunately.
I don't want to have to replace this monitor at this time.
I see in the latest version of After Effects I can force the image to "letterbox" in the external monitor. I tested it, and it works perfectly.
Ironically, PhotoShop CS3 does NOT allow you to letterbox your preview to an external monitor. A widescreen formatted file appears cropped in my monitor.
So, my question is can I do this in FCP 5.0? Why am I stuck with a cropped image from a 720x480 aspect ratio? Is there a setting somewhere that will force the preview to letterbox on my monitor?
On a similar note, what will we use to replace NTSC monitors if you're shooting and editing HD?
Thanks so much.

FCP will not unsqueeze the image for you...you need a monitor that has this option.
what will we use to replace NTSC monitors if you're shooting and editing HD?
And HD monitor. But then you need some sort of HD capture card or output device (unless you are working with DVCPRO HD)...even HDV. And then you will need an HD monitor. The cheapest solution might be the Decklink Intensity and small HDTV...the intensity has HDMI out. But this only works if you have a MacPro. The MATROX MXO is next, and it connects via DVI. It can output a signal to an HDTV (component), or to an Apple Cinema Display or Dell 24" Display. That gets you broadcast quality on a computer monitor...believe it, or not!
http://library.creativecow.net/articles/ross_shane/MXO.php
Shane

External NTSC monitor setup

When I use an external NTSC monitor connected to an Apple DVI to video adaptor then to a Radeon 800XT video card I have many crashes. It seems like these are caused by the External monitor setup. I would to know what sort step up others are using for external video. And what kind of success you are having with them.
Thanks
Ken

I to have had the same problem, in fact, I just posted about it a few days ago. Hopefully Apple's monitoring this forum and looking at the issue. The only solution I've found is to disable the external preview, which is quite frustrating. Just a question have your crashed happened while you're working or when you perform application switching. I've only had problems when I apple-tab to another program and then do the same to get back into Motion.

My text flickers like mad on NTSC monitor

I burned a DVD and tested it on my computer LCD screen. It looks fine.
But when I tried it on an NTSC monitor, the intro text flickers like mad.
OK, the fonts are a bit small to squeeze everything on, but it should not flicker as much as it does.
My font face is plain Arial.
The rest of the DVD is OK.
(ps: I did the text in Motion, imported it into FCP and rendered it out ProRes422 HQ). As I say, it looks great on my computer monitor.

the fonts are a bit small to squeeze everything on
this could be your problem
the choice of the text has to be compatable with the rezolution of the CRT - thin horizontal strokes cant be resolved properly and results in flicker
a good rule is to size text so that 30 lines of text can be displayed in the screen hight- if it doesnt fit, throw out some of the text or put it on a separate screen

Cannot get 16 X 9 aspect ratio on NTSC monitor

Just installed a Radeon 9800 pro Mac edition to replace the original GeForce 5200 that came with the computer. The new card is great and gives 30 fps on the main LaCie electron blue 19" monitor when "Full screen" mode is selected. Problem is ... when I select "External video" regardless of the option selected under "Preferences" in "Output" the framerate drops to 6 or 7 fps. The image on the Sony PVM monitor always shows in a stretched 4 X 3 aspect ratio with letterboxing all around it, top, bottom and sides regardless of what option I select in the ATI preferences on the Mac2TV panel. Now when I drag the viewing window from the main monitor to the External Sony PVM monitor and select "Full screen",(external video turned off) the aspect ratio remains in 16 X 9 with an acceptable frame rate.
Any suggestions out there? Thanks!
Dual 1.8 (original) G5/2.5gb RAM Mac OS X (10.4.6) Radeon 9800 pro Mac edition
Dual 1.8 (original) G5 Mac OS X (10.4.5)

A solution for "Video output"
When sending an FCP 5.1.1 HDV sequence to "Motion project", it sends it at 1440 x 1080 and Motion 2.1.1 will open a new project to that size. Once that FCP HDV sequence is opened in Motion 2.1.1 and "Full screen mode" is selected it will play to a full screen in 16 x 9 at 30 fps on the "Main Computer Monitor". In this case the main monitor is a LaCie Electron blue 19". Now if "External video" is selected that being a Sony PVM 1351Q the image will show as a 1440 x 1080 and play at only 5 fps. Furthermore it will create a letterbox on all four sides. (looks like a stretched vertical 4 x 3). Now if a new project is opened in Motion 2.1.1 in HD (1920 x1080) and the same HDV QT file is imported in Motion ; the same procedure repeated, the image will play at a proper size and the 16 x 9 aspect ratio on the secondary NTSC Monitor will be respected, mind you it will still play at only 5 fps.
"SOLUTION"
By canceling the "Video output" on Motion, a full frame 16 x 9 image can be viewed on the "Main Monitor". By the way, that image is astonishing compared to what it was with the previous video card. Now by dragging the "Viewer image" above the timeline to the "Secondary Monitor (Sony)" and selecting the "Full Screen Mode" it will then give a proper full screen image with a 16 x 9 aspect ratio on the Sony PVM 1351Q at 30 fps. The image seen on the NTSC monitors when using FCP 5.1.1 in HDV has also improved to a great degree. It has improved to the point where the Radeon® 9800 Pro Mac® Edition 256MB AGP becomes an interesting solution for HDV editing in Final Cut Studio.
If somene has a better solution, I'm all ears! ... or all read!
Dual 1.8 (original) G5 Mac OS X (10.4.6) Radeon® 9800 Pro Mac® Edition 256MB AGP

Motion Effect doesn't always work with Time Remapped clips

Hello all. I used Premiere 4 extensively (yes, '4' not 'CS4') and I'm just getting back in to it with CS6. Lots of cool new stuff to learn but I'm happy to see the basics are pretty much the same!
I'm wondering if anyone has much experience using motion effects on time-remapped clips. If I set 'position' or 'scale' keyframes in the Effect Controls, the changes are not always reflected in the program monitor, depending on the clip. If I try and set keyframes by dragging the video around the program monitor, it puts keyframes in places where I don't expect.
This doesn't affect all time-remapped clips, just some of them. Or maybe it does affect them all, just to varying degrees, depending on how extreme the time remapping is. I'm guessing now.
If I were to speculate further, I would say that the motion effect is operating on the clip before the time remapping gets applied. Again, just a guess, which is why I'm asking if someone more knowledgable has any insights before I pursue this much further..
Many thanks!

Hi Jeff, thanks for your response! Nested clips, you say? I have heard of these things but I can only imagine what they are and how to use them. Sounds like it's time for me to RTFM!
There's so much new stuff, it doesn't surprise me that I have to not only figure out the new feature, but the proper workflow to utilize it. I gotta ask: Do you know of any documents along the lines of "how to use modern premiere from the perspective of an antiquated premiere professional"? 4.2 was my bread and butter for many years and I knew it like the back of my hand. As such, it's kind of hard to stay awake sifting through Adobe's docs which generally assume no prior knowledge; although you giving me a place to start is a big help! But like I said: I gotta ask because it'd be great if there was something just for 'people like me.' (ain't it always the case? )
Again, thank you.

MythTV Program Guide Slow/No Composite Effects On Dual Monitor

Hello all,
I am not entirely sure where this would belong, so I put it here.
I am running Arch64 with an NVidia 8600GTS and dual monitors as seperate X screens. The second monitor is actually a TV not a monitor, and is using the S-Video output on the video card, but I'm not sure that that's relevant at all.
On my primary monitor the program guide in MythTV runs fairly decent, however on the TV it runs unbearably slow. Pushing up on the remote a time or two will take a minute or so to happen. I have it set to the least demanding level possible.
I originally thought that this was just a MythTV issue but I noticed that XCompmgr and Compiz-Fusion effects do not work at all on the TV either, so I think these issues are related.
Also, I do not currently have a composite window manager installed, I am using Gnome with Metacity.
Here is a copy of my xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jan 6 09:43:54 PST 2009
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 16
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
It's a bit of a mess at the moment. Last time I reinstalled I was having trouble with the keyboard and mouse not working in Gnome, so I've been hesitant to mess with it too much.
On my previous install my xorg.conf looked like this:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Wed Oct 1 15:13:37 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Jul 17 18:39:00 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
# Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
I had the same issues with composite managers and that MythTV guide using this xorg.conf too.
Has anyone had any similar issues? I am at a total loss here, so any help is greatly appreciated. Thank you.

No one else has had troubles with the program guide or composite effects on dual monitors?

NTSC Monitor

Can I use the Apple Mini-DVI to Video Adapter,
Part Number: M9319G/A, and set FCP Audio/Video Settings to view the canvas on an NTSC monitor?

The digital to analog conversion that takes place in most camcorders, VTRs or converters is pretty much the same - the quality difference would be the same.
When you set FCP to view "External Video," you're seeing the output of FCP's Canvas or Viewer (depending on which is active). You will not see unrendered clips unless they'll play in RT .. if they are unrendered and playback in RT, you'll see the unrendered version. You will not see what something might look like - such as MPEG-2 encoding ... Firewire output isn't a crystal ball.
Keep in mind that FCP's Canvas window only displays a proxy of the full quality, which is another reason to be viewing on an external TV monitor.
-DH

Viewing FCP on NTSC MONITOR

In my days with PC I used to watch my timeling in Premier Pro on my NTSC monitor. I had a Matrox card with an outbox and connected the svideo out on the box to my monitor.
Now in the Mac Pro I have dual outputs on my ATI Raden card and all I get on my NTSC is a duplicate screen.
Is there no way to do this? No one at Apple is of any help with this.'
Thankds
bobby43

There are plenty of A/D converters on the market, but they have nothing to do with the DVI ports. Those will just give you a second monitor to mirror or extend your computer display.
What camera are you using? Most will convert the signal (FW to the camera, analogue out of the camera to the monitor) but there are some preferences in FCP that you have to set.
For converters, check out the line from Canopus.
rh

Video Output to NTSC monitor

I recently got new furniture, so of course, I unhooked everything and moved it around, and now, for some reason, I can't see video on my NTSC monitor. I know everything is hooked up correctly because I can log and capture and see video on the monitor; the video captures correctly with audio and everything. But when watching video in the timeline, there's nothing happening on the monitor. Any suggestions? Has this happened to anyone else?
I have switched out firewire cables, rebooted the computer, etc. I'm so confused!

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Aspect ratio of NTSC monitor display

We're working on a FCP 4.5 project that's shot 16:9, and displays with the correct widescreen aspect in the canvas window (so long as pixels are displayed square). However, when I run mirrored video through a Sony DSR11 deck to an NTSC monitor, the picture appears stretched vertically (to fill the screen). How can I correct the aspect of the display in the monitor?
Thanks
Matt Clifton

If I read right the poster is working anamorphic and wants to monitor it properly. Anything that creates a letterboxed display on 4:3 (including a deck conversion will not be monitoring the true signal. It will be a downrezzed and substantially mashed version.
If you need to truly monitor anamorphic output, just "anamorph" the monitor - see above.

Firewire out to NTSC monitor.....no luck

I've tried the things suggested on this board and I have no luck getting video out to my NTSC monitor. When I go to View -> Video playback, I only get two choices, "none" or "digital cinema desktop preview - main". When I selectr "external video -> All Frames, the setting doesnt stick.
I have my MacPro's Firewire going to the DV input of my DVD recorder and the analog outputs to the monitor. Could it be that FCP simply doesn't recoginze my DVD recorder as a device? Hopefully I'm just missing something here.

Chris, I've tried to do what I think you're doing now, with a different objective - getting my FCP sequence to record directly via FireWire to my Samsung DVD recorder. And that didn't work either. I think the reason is for External Video to see a DV signal, it has to be both DV in and out. Since the DV FireWire cable you're hooking up to your DVD Recorder does not allow FCP to receive a DV signal, FCP is not recognizing the Recorder as a DV source. Does that make sense? I think you need to do as Jerry suggessts and get a DV deck or camera - I've seen JVCs selling for under $200!

Stuttering Motion Effects on NTSC monitor

Similar Messages

Maybe you are looking for